.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Oil Seals

seal0289
£0.45 (£0.54 inc VAT)
OEM: 06-2583, 40-0148, 68-0289, 40-148, 68-289
O Ring Nitrile Seal - ID: 1/2", OD: 5/8", Width: 1/16" - Various Applications Various uses on BSA and Norton models including: Oil pump feed gear -...
+

oilseal0749-met
£2.45 (£2.94 inc VAT)
OEM: 90-0749, 90-749
BSA Bantam Crankshaft Drive Side / Timing Side Oil Seal - All Models D1, D3, D5, D7, D10, D14 and B175 Crankshaft drive side and timing side oil seal on...
 

seal3379
£1.95 (£2.34 inc VAT)
OEM: 70-3379, E3379
Triumph T20 Tiger Cub Crankshaft Main Bearing Drive Side Oil Seal - All Models Drive side main bearing oil seal as used on all T15 Terrier and  T20...
+

seal0243
£1.95 (£2.34 inc VAT)
OEM: 40-0243, 70-3833, E3833
BSA/Triumph Clutch Back Plate Oil Seal - Unit Singles Circa 1959-72 Clutch / primary case backing plate oil seal. Suitable for C15, C25, B25, B40, B44,...
+

seal1996
£3.95 (£4.74 inc VAT)
OEM: 29-1996
BSA Camshaft / Contact Breaker Oil Seal - C10L, C11G and C12 Models Circa 1954-58 Camshaft oil seal, locates within the timing cover behind the contact...
+

oilseal3933-B13
£2.95 (£3.54 inc VAT)
OEM: 70-3933, E3933
Triumph T20 Tiger Cub Gearbox Mainshaft Oil Seal Retainer - Circa 1957 Onwards Gearbox mainshaft shaft oil seal retainer - locates behind the clutch. OD:...
+

oilseal0284
£3.45 (£4.14 inc VAT)
OEM: 90-0284, 90-284
BSA Bantam Crankshaft Drive Side Oil Seal - D1, D3 Models - Pre 1954 Crankshaft drive side oil seal as used on early D1 and D3 models - locates between...
+

oilseal8023
£2.95 (£3.54 inc VAT)
OEM: 048023, D12/913, T2124, 04-8023
Norton Crankcase Timing Cover Mainshaft Oil Seal - 500/600/650/750cc Twins Mainshaft oil seal - locates in the crankcase timing cover. Correct fitment on...
+

seal3168
£0.45 (£0.54 inc VAT)
OEM: 68-3168, 57-2697, T2697
O Ring Nitrile Seal - ID: 1/2", OD: 5/8", Width: 1/16" - Various Applications Various uses on BSA/Triumph models including drain plug seal on some...
+

seal351-B7
£9.95 (£11.94 inc VAT)
OEM: 90-0749, 90-0147, 89-3006, 86-8769
Oil Seal Set - Engine and Gearbox - BSA Bantam D10 and D14 Models - Circa 1967-71 Suitable for three or four speed D10 and D14 Bantam models. Kit...
+

seal350-B7
£7.95 (£9.54 inc VAT)
OEM: 90-0749, 90-0147, 89-3006
Oil Seal Set - Engine and Gearbox - BSA Bantam D1, D3, D5, D7 Models - Circa 1954-66 Suitable for three speed Bantam models as listed above. Kit...
+

seal352-B7
£10.95 (£13.14 inc VAT)
OEM: 40-0025, 40-0243, 40-0679, 40-3281, 40-0977
Oil Seal Set - Engine and Gearbox - BSA C15 and B40 Side Points Models - Circa 1964-66 Suitable for C15 and B40 Sport Star models with side points circa...
+

oilseal3006
£3.95 (£4.74 inc VAT)
OEM: 89-3006
BSA Bantam Gearbox / Sprocket Oil Seal - Three Speed D1, D3, D5, D7 and D10 Models Gearbox oil seal - locates between the oil seal housing and crankcase....
+

seal359-B7
£7.95 (£9.54 inc VAT)
OEM: 70-4568, 70-3379, 97-1168, E4568, E3379, H1168
Oil Seal Set - Engine and Gearbox - Triumph T20 Tiger Cub Models - 1963 Onwards Suitable for T20 Tiger Cub models circa 1963-1967. Kit contains: side...
+

wash1031-B18
£1.95 (£2.34 inc VAT)
OEM: 57-1031, T1031
Triumph Primary Chaincase Oil Retainer Plate - Pre Unit Twins Circa 1952-56 Oil sealing washer, locates within the inner chaincase behind the retaining...
+

oilseal0147
£2.45 (£2.94 inc VAT)
OEM: 90-0147, 90-147
BSA Bantam Crankshaft Alternator Side Oil Seal - All Models D1, D3, D5, D7, D10, D14 and B175 Alternator side oil seal on D1, D3, D5, D7, D10, D14 and...
+

wash0588
£0.45 (£0.54 inc VAT)
OEM: 68-0588, 71-4443, E14443
BSA Oil Feed Pipe O Ring - A50 and A65 Models Circa 1965-72 Rubber O ring seal for oil lines on A50 and A65 models from 1965-72. Also used between the...
+

seal289
£1.95 (£2.34 inc VAT)
OEM: 40-0679, 70-8153, E8153
BSA/Triumph Contact Breaker / Camshaft Oil Seal - Unit Singles From 1964 Onwards Camshaft oil seal, locates behind the contact plate - correct fitment on...
+

wash1381-B23
£2.45 (£2.94 inc VAT)
OEM: 57-1381, 57-1556, T1381, T1556
Triumph Clutch Oil Seal Retaining Plate - Pre Unit Twins From 1957 Onwards Oil sealing washer, locates within the inner chaincase behind the retaining...
+

oilseal40526
£4.95 (£5.94 inc VAT)
OEM: 40-0025, 40-25
BSA Crankshaft Oil Seal - Trials Models - Thin Type For Talon 18T Engine Sprocket Use in conjunction with the Talon 18T engine sprocket on BSA C15, C25,...
+

oilseal1242
£2.95 (£3.54 inc VAT)
OEM: 67-1242
BSA Primary Chaincase Oil Seal - A7 and A10 Rigid/Plunger Frame Models - Circa 1947-57 Chaincase / gearbox mainshaft oil seal - correct fitment on...
+

seal6299
£0.65 (£0.78 inc VAT)
OEM: 70-6299, E6299, 40-0418, 57-3620, 70-7431, E7431
Triumph Primary Chain Oil Drain and Adjuster Plug O Ring - 650/750cc - 1969 Onwards O ring seal for the adjuster plug as used on all unit twins from...
+

seal1923-B13
£1.95 (£2.34 inc VAT)
OEM: 66-1923
BSA Timing Cover Oil Feed Rubber Washer - Pre Unit B and M Group Camshaft oil seal in timing cover. As fitted to BSA B31, B32, B33, B34 and M20, M21, M33...
+

seal7565
£1.95 (£2.34 inc VAT)
OEM: 70-7565, E7565
Triumph Clutch Back Plate Oil Seal - 500/650cc Unit Models from 1968 Onwards Gearbox sprocket cover plate oil seal. Correct fitment for T120 and TR6...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.