.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Bolts & Nuts

nut-DS47-B14
£1.75 (£2.10 inc VAT)
OEM: DS47, DS-47
7/16" x 26 CEI Half Nut - Various Uses on Pre Unit Triumph Models Used extensively on many frame, bolts and stud fixing points. Gearbox mounting,...
+

bolt3575-B14
£11.95 (£14.34 inc VAT)
OEM: 82-3575, F3575
Triumph Gearbox Pivot Bolt - Pre Unit 500/650cc Models Circa 1954-59 Threaded mounting stud, correct fitment on T100, 6T, T110, T120, TR6 models. Length...
+

stud3769-B14
£2.95 (£3.54 inc VAT)
OEM: 82-3769, F3769
Triumph Gearbox Top Mounting Stud - Pre Unit 500/650cc Models Circa 1956-62 Threaded mounting stud, correct fitment on T100, 6T, T110, T120, TR6 models....
+

bolt3767-B13
£5.95 (£7.14 inc VAT)
OEM: 82-3767, F3767
Triumph Gearbox Adjuster Pivot Pin - Pre Unit 500/650cc Models Circa 1956-59 Abutment pin to fit T100, 6T, T110, T120, TR6 models circa 1956-59. Made in...
+

stud0672-B19
£2.45 (£2.94 inc VAT)
OEM: 70-0672, E672
Triumph Cylinder Base Stud - Pre Unit 500/650cc and Unit 650cc Models Correct fitment on many pre unit twins - 5T, TR5, 6T, T110, TR6, T120 circa...
+

stud3523-B14
£2.45 (£2.94 inc VAT)
OEM: 70-3523, E3523
Triumph Grooved Cylinder Base Stud - Pre Unit 500/650cc and Unit 650cc Models Correct fitment on many pre unit twins - 5T, TR5, 6T, T110, TR6, T120 circa...
+

nut3971-B13
£7.95 (£9.54 inc VAT)
OEM: 70-3971, E3971
Alternator Rotor Nut - Triumph T20 Tiger Cub Models From 1959 Onwards To secure the alternator rotor on the shaft. Length UH: 3/4" (19mm) OD: 9/16"...
+

enginestud-4537-B13
£8.95 (£10.74 inc VAT)
OEM: 70-4537, E4537
Triumph Short Alternator Mounting Stator Stud - 650cc Models Circa 1963-68 Rear stator stud, correct fitment on unit 6T, T120 and TR6 models circa...
+

enginestud-4536-B13
£8.45 (£10.14 inc VAT)
OEM: 70-4536, E4536
Triumph Long Alternator Mounting Stator Stud - 650cc Models Circa 1963-68 Front stator stud, correct fitment on unit 6T, T120 and TR6 models circa...
+

studs602-B18
£10.95 (£13.14 inc VAT)
OEM: 21-1865, S1865, 71-3013, E13013
Triumph Cylinder Base Stud Set - 750cc Models - Circa 1973-82 Correct fitment on Triumph T140 and TR7 models. Set includes 8 cylinder base studs - 4x...
+

studs601-B14
£10.95 (£13.14 inc VAT)
OEM: 21-1865, S1865
Triumph Cylinder Base Stud Set - 650cc Models - Circa 1968-72 Correct fitment on Triumph T120 and TR6 models. Set includes 8 cylinder base studs - 12...
+

nut6523-B13
£4.95 (£5.94 inc VAT)
OEM: 70-6523, E6523
Triumph Exhaust Camshaft Nut LH Thread - Unit 500/650/750cc Models - Circa 1970-87 Exhaust camshaft retaining nut on all 650/750cc twins from 1970 onwards...
+

nut3120-B14
£5.45 (£6.54 inc VAT)
OEM: 70-3120, E3120
Triumph Crankshaft Drive Side Nut - Pre Unit 500/650cc Dynamo Models - Circa 1953-59 Engine sprocket nut as used on pre-unit T100, TR5, T110, TR6 and...
+

wash3887
£0.45 (£0.54 inc VAT)
OEM: 70-3887, E3887
Triumph Oil Pump Mounting Serrated Washer - Conical Type - 350/500/650/750cc Unit Twins Correct for all unit twins - 3TA, 5TA, T90, T100, 6T, TR6, T120,...
+

nut0702-B14
£1.45 (£1.74 inc VAT)
OEM: 14-0702
Triumph Alternator / Carb Manifold Mounting Nut - Unit Twins - 1969 Onwards For mounting the alternator stator on the primary chaincase on 500/650/750cc...
+

nut3955-B14
£0.65 (£0.78 inc VAT)
OEM: 82-3955, F3955
3/8" CEI Self-Locking Nyloc Nut 3/8" CEI self-locking nyloc nut. deep type - 26TPI OEM: 82-3955, F3955
+

nut1463-B13
£8.95 (£10.74 inc VAT)
OEM: 70-1463, E1463
Triumph Inlet Camshaft Oil Pump Drive Nut - Pre Unit 500/650cc Twins - Circa 1946-61 Correct fitment for earlier pre-unit twins -  3TA, 5T, T100, 6T,...
+

nut0643-B18
£4.95 (£5.94 inc VAT)
OEM: 67-0643, 67-643
BSA Crankshaft Timing Side Pinion Drive Nut - A50, A65, A7, A10 Models - LH Thread Half time pinion gear locknut as used on all BSA A50/A65 models from...
+

stud1536-B13
£2.25 (£2.70 inc VAT)
OEM: 70-1536, E1536
Triumph Crankcase to Oil Pump Stud - Pre Unit 350/500/650cc Twins From 1939-62 Oil pump body to crankcase fixing stud - Correct fitment on pre-unit twins...
+

bolt-set0078-B14
£56.95 (£68.34 inc VAT)
OEM: 00-0078
Triumph Pre-Unit Engine Mounting Stud / Bolt Set - 500/650cc Models from 1954-59 To mount the engine and gearbox in pre-unit models with a single...
+

bolt-set9948-B14
£59.95 (£71.94 inc VAT)
OEM: 70-1596, E1596, 70-4771, E4771, 70-0327, E327, 70-2982, E2982, 21-1875, S1875, 57-1553, T1553
Triumph Cylinder Head Complete Bolt Set - 650cc Unit Twins to 1970 Complete set of bolts and washers as follows: 1x 70-4771 Centre head bolt - 5/16" x...
+

bolt0241-B19
£2.45 (£2.94 inc VAT)
OEM: 14-0241
Triumph T140, TR7 Cylinder Head Bolt - UNF Thread Length UH: 3+1/2" (88.6mm) Diameter: 3/8" UNF thread OEM: 14-0241
+

bolt-set3797-B14
£67.95 (£81.54 inc VAT)
OEM: 70-0327, E327, 83-2184, F2184, 70-4771, E4771, 70-1596, E1596, 70-2989, E2989, 83-0879, F879, 70-3302, E3302
Triumph T120/TR6 Cylinder Head Bolt and Stud Set - 9 Stud Models from 1963-70 Complete set of bolts, studs washers and nuts as follows: 4x 70-0327, E327...
+

bolt3552-B13
£3.95 (£4.74 inc VAT)
OEM: 71-3552, E13552
Crankshaft Flywheel Bolt - Triumph T140, TR7 From 1973-1982 Flywheel to crankshaft bolt as used on Triumph 750cc twins - 3 required. Length UH: 1+7/16"...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.