.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Bolts & Nuts

bolt-set0078-B14
£56.95 (£68.34 inc VAT)
OEM: 00-0078
Triumph Pre-Unit Engine Mounting Stud / Bolt Set - 500/650cc Models from 1954-59 To mount the engine and gearbox in pre-unit models with a single...
+

screwkit-952M-B9
£37.95 (£45.54 inc VAT)
OEM: E3439, E3437, E3444, E3442, E3438, 70-3439, 70-3437, 70-3444, 70-3442, 70-3438
Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit 5T and 6T Models From 1956-62 Complete set of engine/gearbox screws suitable for later 5T...
+

wash3300-B13
£4.95 (£5.94 inc VAT)
OEM: 70-3300, E3300
Triumph Crankshaft Timing Pinion Clamping Washer - Pre Unit + 650/750cc Unit Twins From 1954-82 Locates between the right hand main bearing and timing...
+

bolt0241-B19
£2.45 (£2.94 inc VAT)
OEM: 14-0241
Triumph T140, TR7 Cylinder Head Bolt - UNF Thread Length UH: 3+1/2" (88.6mm) Diameter: 3/8" UNF thread OEM: 14-0241
+

bolt574-B19
£3.95 (£4.74 inc VAT)
OEM: 67-1259
BSA A7, A10 Magneto Bolt - 67-1259 BSA A7/A10 extended magneto fixing bolt Mounts the magneto to the engine, this is the lover fixing bolt that can't be...
+

bolt735H-B19
£3.95 (£4.74 inc VAT)
OEM: 21-2200
Triumph T140, Cylinder head stud (centre 5/16" stud) OEM: 21-2200
+

screwkit-950M-B9
£37.95 (£45.54 inc VAT)
OEM: E1049, E427, E2691 , E329. T452, E573, 70-1049, 70-0427, 70-2691, 70-0329, 57-0452, 70-0573
Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit Dynamo models Circa 1946-53 Complete set of engine/gearbox screws suitable for 5T, T100,...
+

nut0076-B14
£1.25 (£1.50 inc VAT)
OEM: W76, 37-0076
Triumph Twin - Cylinder Base Nut - W76 Also used in some pre-unit gearboxes OEM: W76, 37-0076
+

bolt410
£19.95 (£23.94 inc VAT)
BSA Engine/Gearbox Mounting Bolt Set - B Group Swinging Arm Models 9 Pieces
+

nut1492-B13
£4.95 (£5.94 inc VAT)
OEM: 70-1492, E1492
Triumph Exhaust Camshaft Nut LH Thread - 500/650cc Pre-Unit Twins Camshaft retaining nut. 5/8" 20 TPI with left hand thread. OEM: 70-1492, E1492
+

wash0644-B18
£1.25 (£1.50 inc VAT)
OEM: 67-0644, 67-644
BSA Crankshaft Gear Side Tab Washer - A50, A65, A7 and A10 Models - 1947 Onwards Half time pinion lockwasher as used on all A50 and A65 models from...
+

nut0398-B18
£6.95 (£8.34 inc VAT)
OEM: 70-0398, E398
Triumph Crankshaft Timing Pinion Nut - 500/650cc Pre-Unit Models 3/4" x 20 TPI - Stainless steel OEM: 70-0398, E398
+

bolts2980b-B19
£2.25 (£2.70 inc VAT)
OEM: 31-222, 31-0222, 67-0280, 70-2980
BSA Engine Stud - 31-222 Coarse thread to screw into the engine, and fine thread for the nut. OEM: 31-222, 31-0222, 67-0280, 70-2980
+

nut1463-B13
£8.95 (£10.74 inc VAT)
OEM: 70-1463, E1463
Triumph Inlet Camshaft Oil Pump Drive Nut - Pre Unit 500/650cc Twins - Circa 1946-61 Correct fitment for earlier pre-unit twins -  3TA, 5T, T100, 6T,...
+

nut3120-B14
£5.45 (£6.54 inc VAT)
OEM: 70-3120, E3120
Triumph Crankshaft Drive Side Nut - Pre Unit 500/650cc Dynamo Models - Circa 1953-59 Engine sprocket nut as used on pre-unit T100, TR5, T110, TR6 and...
+

domenut1531-B13
£2.95 (£3.54 inc VAT)
OEM: 97-1531, H1531
Triumph Primary and Gearbox Cover Dome Nut - Unit 650cc Models Circa 1963-68 Chrome plated acorn nut used to secure both the primary chaincase cover and...
+

stud2149-B19
£2.45 (£2.94 inc VAT)
OEM: 21-2149, S2149
Triumph Gearbox Inner Cover Stud - 750cc Twins + Later T120 and TR6 Models From 1972 Onwards Crankcase to gearbox stud as used on later 650cc twins from...
+

gbox008-B18
£5.95 (£7.14 inc VAT)
OEM: 70-4565, E4565
Triumph Crankshaft Timing Pinion Nut - Unit 650cc Models Circa 1963-71 Correct fitment on unit 6T, T120 and TR6 models. OEM: 70-4565, E4565
+

nut3772-B13
£4.45 (£5.34 inc VAT)
OEM: 82-3772, F3772
Triumph Gearbox Adjuster Sleeve Nut - Pre Unit 500/650cc Models Circa 1955-62 Timing side sleeve nut - locates on the gearbox top clamp stud to position...
+

bolt6608-B13
£1.45 (£1.74 inc VAT)
OEM: 14-6608
Triumph Chaincase / Timing Cover Cheese Head Screw - 1969 onwards Length 1" x 1/4'' UNC thread Made in England OEM: 14-6608
+

wash3770-B13
£2.45 (£2.94 inc VAT)
OEM: 82-3770, F3770
Triumph Serrated Gearbox Clamp Washer - Pre Unit 500/650cc Models Circa 1956-62 Serrated clamping washer, fits on the top gearbox mounting stud to...
+

nut035-B14
£0.75 (£0.90 inc VAT)
OEM: 21-7051
Alternator Mounting Nut, Manifold Nut, etc - Triumph - 21-7051 Fits the early Triumph pre-unit and other models For mounting the alternator stator on the...
+

nut2177-B14
£0.95 (£1.14 inc VAT)
OEM: 21-2177
T140/TR7 Cylinder base nut (Outer studs) 1972-82 OEM: 21-2177
+

stud3769-B14
£2.95 (£3.54 inc VAT)
OEM: 82-3769, F3769
Triumph Gearbox Top Mounting Stud - Pre Unit 500/650cc Models Circa 1956-62 Threaded mounting stud, correct fitment on T100, 6T, T110, T120, TR6 models....
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.