Engine & Transmission :: Engine Lower

CODE: enginestud-6498-B14

Triumph Bottom Engine Mounting Stud - Unit 650cc Models Circa 1963-70

£5.95 (£7.14 inc VAT)

OEM: 82-6498, F6498

Triumph Bottom Engine Mounting Stud - Unit 650cc Models Circa 1963-70 Engine to frame lowwer mounting stud as used on T120 and TR6 models up to 1970....

Quantity:

+ −

CODE: screw0689-A4

Triumph Nacelle Fitting / Handlebar Switch to Lever Clamp Screw - 4BA x 1/4"

£0.75 (£0.90 inc VAT)

OEM: 97-0689, H689

Triumph Nacelle Fitting / Handlebar Switch to Lever Clamp Screw - 4BA x 1/4" Domed head slotted screw as used on pre unit and unit models to attach the...

Quantity:

+ −

CODE: nut2053-B13

BSA/Triumph Alternator Rotor Nut - Shouldered - C12, C15, B25, B40, B44, B50 and TR25W Models

£5.95 (£7.14 inc VAT)

OEM: 29-2053, 70-8146

BSA/Triumph Alternator Rotor Nut - Shouldered - C12, C15, B25, B40, B44, B50 and TR25W Models Flanged nut used to secure the alternator rotor on the...

Quantity:

+ −

CODE: bolt-set0074-B14

Triumph Engine Mounting Stud / Bolt Set - Unit 650cc Models from 1963-67

£72.95 (£87.54 inc VAT)

OEM: 00-0074, 82-5469, 82-6498, 82-5532, 82-3805, 82-3069

Triumph Engine Mounting Stud / Bolt Set - Unit 650cc Models from 1963-67 Engine to frame mounting bolts, studs, spacers and fixings. Suitable for 6T, TR6...

Quantity:

+ −

CODE: stud2825-B19

Triumph Engine Plate to Frame Tie Stud - Unit 350/500cc Models Circa 1959-67

£2.45 (£2.94 inc VAT)

OEM: 82-2825, F2825

Triumph Engine Plate to Frame Tie Stud - Unit 350/500cc Models Circa 1959-67 Upper front engine plate to frame mounting stud. Correct fitment on 3TA,...

Quantity:

+ −

CODE: bolt3937-B19

Triumph Engine Plates to Crankcase Domed Bolt - Unit 350/500cc Models Circa 1959-63

£2.45 (£2.94 inc VAT)

OEM: 70-3937, E3937

Triumph Engine Plates to Crankcase Domed Bolt - Unit 350/500cc Models Circa 1959-63 Front engine plate to crankcase domed head bolt - three required per...

Quantity:

+ −

CODE: bolt1086-B19

BSA M20/M21 Cylinder Head Bolt - Circa 1937-49 - Short Type

£3.45 (£4.14 inc VAT)

OEM: 35-1086

BSA M20/M21 Cylinder Head Bolt - Circa 1937-49 - Short Type High quality BZP plated high tensile bolt. Five required for models from 1940-49 onwards....

Quantity:

+ −

70-1555, E1555 - Triumph Crankcase Halves Top Rear Bolt - Pre Unit Models Circa 1939-62

CODE: bolt1555-B19

Triumph Crankcase Halves Top Rear Bolt - Pre Unit 500/650cc Models Circa 1939-62

£1.75 (£2.10 inc VAT)

OEM: 70-1555, E1555

Triumph Crankcase Halves Top Rear Bolt - Pre Unit Models Circa 1939-62 Top rear crankcase securing bolt as used on pre unit 5T, TR5, T100, 6T, T110, TR6...

Quantity:

+ −

CODE: screw2162-B19

Triumph Gearbox Outer Cover Screw - T140 and TR7 Models Circa 1973-78

£1.25 (£1.50 inc VAT)

OEM: 21-2162, S2162

Triumph Gearbox Outer Cover Screw - T140 and TR7 Models Circa 1973-78 Outer gearbox cover to crankcase long cheese head pozi drive screw. Correct fitment...

Quantity:

+ −

CODE: stud4123-B13

Triumph Alternator Mounting Stud - Pre Unit T110, T120 and TR6 Models Circa 1960-62

£2.25 (£2.70 inc VAT)

OEM: 70-4123, E4123

Triumph Alternator Mounting Stud - Pre Unit T110, T120 and TR6 Models Circa 1960-62 Short stud to mount the alternator stator on the primary chaincase....

Quantity:

+ −

CODE: stud0454-B18

Triumph Gearchange Guide Plate Stud - All Pre Unit + Unit 650cc Models Circa 1939-68

£2.45 (£2.94 inc VAT)

OEM: 57-0454, T454

Triumph Gearchange Guide Plate Stud - All Pre Unit + Unit 650cc Models Circa 1939-68 Secures the gearchange quadrant guide plate to the outer gearbox...

Quantity:

+ −

CODE: nut3117-B13

Triumph Alternator Rotor Nut - Pre Unit 5T and 6T Models Circa 1953-54

£5.95 (£7.14 inc VAT)

OEM: 70-3117, E3117

Triumph Alternator Rotor Nut - Pre Unit 5T and 6T Models Circa 1953-54 Sleeve nut used to secure the alternator rotor on the shaft. Correct fitment on...

Quantity:

+ −

CODE: stud1864-B19

Triumph Crankcase to Oil Pump Stud - 500/650cc Models From 1969 Onwards + 750cc Twins Circa 1973-79

£1.25 (£1.50 inc VAT)

OEM: 21-1864, S1864

Triumph Crankcase to Oil Pump Stud - 500/650cc Models From 1969 Onwards + 750cc Twins Circa 1973-79 Oil pump body to crankcase fixing stud with UNF/UNC...

Quantity:

+ −

CODE: nut1906-B13

Triumph Oil Pump Mounting Nut - 500/650cc Models From 1969 Onwards + 750cc Twins Circa 1973-79

£0.95 (£1.14 inc VAT)

OEM: 21-1906, S1906

Triumph Oil Pump Mounting Nut - 500/650cc Models From 1969 Onwards + 750cc Twins Circa 1973-79 Bevelled oil pump mounting nut with UNF threads. Correct...

Quantity:

+ −

CODE: nut8763-B13

Triumph Alternator Rotor Nut - T150 Trident Models Circa 1968-74 - Long Type

£0.95 (£1.14 inc VAT)

OEM: 70-8763, E8763

Triumph Alternator Rotor Nut - T150 Trident Models Circa 1968-74 - Long Type Longer type sleeve nut used to secure the alternator rotor on the shaft....

Quantity:

+ −

CODE: nut1915-B13

Triumph Alternator Rotor Nut - T90, T100 and TR5T Models From 1969 Onwards

£1.45 (£1.74 inc VAT)

OEM: 21-1915, S1915

Triumph Alternator Rotor Nut - T90, T100 and TR5T Models From 1969 Onwards To secure the alternator rotor on the shaft - correct fitment on 350/500cc...

Quantity:

+ −

14-6609 - Triumph 1/4" UNC Cheese Head Screw - 500/650/750cc Models Circa 1969-79

CODE: screw6609-B19

Triumph 1/4" UNC Cheese Head Cover Screw - 500/650/750cc Models Circa 1969-79

£1.75 (£2.10 inc VAT)

OEM: 14-6609

Triumph 1/4" UNC Cheese Head Screw - 500/650/750cc Models Circa 1969-79 Cheesehead screw - used extensively on unit singles, twins and triples from 1969...

Quantity:

+ −

CODE: enginestud-5469-B14

Triumph Front Engine Mounting Stud - Unit 650cc Models Circa 1963-70

£3.95 (£4.74 inc VAT)

OEM: 82-5469, F5469

Triumph Front Engine Mounting Stud - Unit 650cc Models Circa 1963-70 Front engine mount stud as used on T120 and TR6 models up to 1970. Length: 3+7/16"...

Quantity:

+ −

CODE: stud0669

Triumph Crankcase Halves Front Stud - 750cc Twins + Later T120 and TR6 Models From 1972 Onwards

£4.45 (£5.34 inc VAT)

OEM: 21-0669, S669

Triumph Crankcase Halves Front Stud - 750cc Twins + Later T120 and TR6 Models From 1972 Onwards Crankcase front stud - secures the exhaust pipe stays. As...

Quantity:

+ −

CODE: nut1593-A17

BSA Bantam Alternator Stator Sleeve Nut - D10, D14 and B175 Models

£4.95 (£5.94 inc VAT)

OEM: 90-1593

BSA Bantam Alternator Stator Sleeve Nut - D10, D14 and B175 Models Hexagonal front alternator mounting sleeve nut suitable for bikes running the original...

Quantity:

+ −

70-4098, E4098 - 5/16" CEI - 1+7/8" Crankcase Bolt - Unit 650cc + T20 Tiger Cub Models Circa 1960-68

CODE: bolt4098-B14

5/16" BSF - 1+7/8" Crankcase Bolt - Unit 650cc + T20 Tiger Cub Models Circa 1960-68

£2.45 (£2.94 inc VAT)

OEM: 70-4098, E4098

5/16" BSF - 1+7/8" Crankcase Bolt - Unit 650cc + T20 Tiger Cub Models Circa 1960-68 Small hex, part threaded crankcase bolt. One bolt required on unit...

Quantity:

+ −

CODE: bolt3809-B13

Triumph Rocker Oil Feed Bolt - Unit 350/500cc Models Circa 1958-74

£4.95 (£5.94 inc VAT)

OEM: 70-3809, E3809

Triumph Rocker Oil Feed Bolt - Unit 350/500cc Models Circa 1958-74 Oil feed pipe retaining bolt - correct fitment on 3TA, 5TA, T90 and T100 models from...

Quantity:

+ −

CODE: enginestud-2414-B19

Triumph Upper Frame to Engine Plate Mounting Stud - Pre Unit Models Circa 1946-59

£2.95 (£3.54 inc VAT)

OEM: 82-2414, F2414

Triumph Upper Frame to Engine Plate Mounting Stud - Pre Unit Models Circa 1946-59 Upper frame to engine mounting stud - locates in the boss on the front...

Quantity:

+ −

CODE: wash0138-B18

BSA Oil Pump Stud Tab Washer - A50 and A65 Models Circa 1964-73

£0.95 (£1.14 inc VAT)

OEM: 76-0138, 76-138

BSA Oil Pump Stud Tab Washer - A50 and A65 Models Circa 1964-73 Tabbed lock washer - locates between the oil pump housing and the securing stud. Correct...

Quantity:

+ −

CODE: stud3820-B19

Triumph Cylinder Base Stud - Unit 350/500cc Models Circa 1959-68 - Shorter Type

£1.75 (£2.10 inc VAT)

OEM: 70-3820, E3820

Triumph Cylinder Base Stud - Unit 350/500cc Models Circa 1959-68 - Shorter Type Correct fitment on 3TA, 5TA, T90 and T100 models from 1959-68. Shorter...

Quantity:

+ −

CODE: stud3819-B19

Triumph Cylinder Base Stud - Unit 350/500cc Models Circa 1959-68 - Longer Type

£1.75 (£2.10 inc VAT)

OEM: 70-3819, E3819

Triumph Cylinder Base Stud - Unit 350/500cc Models Circa 1959-68 - Longer Type Correct fitment on 3TA, 5TA, T90 and T100 models from 1959-68. Longer...

Quantity:

+ −

CODE: stud1922-B19

Triumph Cylinder Base Stud - T90, T100 and TR5T Models Circa 1969-74 - Longer Type

£1.75 (£2.10 inc VAT)

OEM: 21-1922, S1922

Triumph Cylinder Base Stud - T90, T100 and TR5T Models Circa 1969-74 - Longer Type Correct fitment on unit 350/500cc models - T90, T100, T100C, T100R,...

Quantity:

+ −

21-1921, S1921 - riumph Cylinder Base Stud - T90, T100 and TR5T Models Circa 1969-74

CODE: stud1921-B19

Triumph Cylinder Base Stud - T90, T100 and TR5T Models Circa 1969-74 - Shorter Type

£1.75 (£2.10 inc VAT)

OEM: 21-1921, S1921

Triumph Cylinder Base Stud - T90, T100 and TR5T Models Circa 1969-74 - Shorter Type Correct fitment on unit 350/500cc models - T90, T100, T100C, T100R,...

Quantity:

+ −

CODE: stud2149-B19

Triumph Gearbox Inner Cover Stud - 750cc Twins + Later T120 and TR6 Models From 1972 Onwards

£2.45 (£2.94 inc VAT)

OEM: 21-2149, S2149

Triumph Gearbox Inner Cover Stud - 750cc Twins + Later T120 and TR6 Models From 1972 Onwards Crankcase to gearbox stud as used on later 650cc twins from...

Quantity:

+ −

CODE: screw1907-B19

Triumph Inner Gearbox Cap Screw - Later 650cc + All 750cc Twins From 1969 Onwards

£0.95 (£1.14 inc VAT)

OEM: 21-1907, 14-7020, S1907

Triumph Inner Gearbox Cap Screw - Later 650cc + All 750cc Twins From 1969 Onwards Inner gearbox cap screw on later T120 and TR6 models + all T140 and TR7...

Quantity:

+ −

70-2874, E2874 - Triumph Long Cylinder Head Bolt Set - Pre Unit 500/650cc Alloy Head Models Circa 1951-62

CODE: bolt2874-B19

Triumph Long Cylinder Head Bolt - Pre Unit 500/650cc Alloy Head Models Circa 1951-62

£5.95 (£7.14 inc VAT)

OEM: 70-2874, E2874

Triumph Long Cylinder Head Bolt Set - Pre Unit 500/650cc Alloy Head Models Circa 1951-62 High tensile inner fixing cylinder head bolt as used on alloy...

Quantity:

+ −

70-2873, E2873 - Triumph Short Cylinder Head Bolt Set - Pre Unit 500/650cc Alloy Head Models Circa 1951-62

CODE: bolt2873-B19

Triumph Short Cylinder Head Bolt - Pre Unit 500/650cc Alloy Head Models Circa 1951-62

£5.95 (£7.14 inc VAT)

OEM: 70-2873, E2873

Triumph Short Cylinder Head Bolt Set - Pre Unit 500/650cc Alloy Head Models Circa 1951-62 High tensile outer fixing cylinder head bolt as used on alloy...

Quantity:

+ −

CODE: dowel1535-B13

Triumph Crankcase to Timing Cover Dowel - Pre Unit 500/650cc Models Circa 1939-62

£2.45 (£2.94 inc VAT)

OEM: 70-1535, E1535

Triumph Crankcase to Timing Cover Dowel - Pre Unit 500/650cc Models Circa 1939-62 Hollow crankcase to timing cover dowel - used to position and secure...

Quantity:

+ −

CODE: enginestud-3695-B14

Triumph Engine Mounting Stud - Unit 350/500cc Models Circa 1958-69

£4.45 (£5.34 inc VAT)

OEM: 70-3695, E3695

Triumph Engine Mounting Stud - Unit 350/500cc Models Circa 1958-69 Locates between the engine mounting plates on 3TA, 5TA, T90 and T100 models circa...

Quantity:

+ −

CODE: nut3771-B13

Triumph Gearbox Clamp Flanged Nut - Drive Side - Pre Unit 500/650cc Models Circa 1955-62

£4.45 (£5.34 inc VAT)

OEM: 82-3771, F3771

Triumph Gearbox Clamp Flanged Nut - Drive Side - Pre Unit 500/650cc Models Circa 1955-62 Drive side serrated and flanged nut - locates on the gearbox top...

Quantity:

+ −

CODE: nut5664-B13

BSA Gearbox Adjuster Nut - A, B and M Group - Rigid, Plunger and Swinging Arm Models

£9.95 (£11.94 inc VAT)

OEM: 15-5664

BSA Gearbox Adjuster Nut - A, B and M Group - Rigid, Plunger and Swinging Arm Models Gearbox adjusting bolt nut - correct fitment on swinging arm A7,...

Quantity:

+ −

CODE: nut3772-B13

Triumph Gearbox Adjuster Sleeve Nut - Pre Unit 500/650cc Models Circa 1955-62

£4.45 (£5.34 inc VAT)

OEM: 82-3772, F3772

Triumph Gearbox Adjuster Sleeve Nut - Pre Unit 500/650cc Models Circa 1955-62 Timing side sleeve nut - locates on the gearbox top clamp stud to position...

Quantity:

+ −

CODE: wash8134

5/16" Serrated Lock Washer - Flat Type - Various Uses on Pre Unit and Unit BSA/Triumph Models

£0.15 (£0.18 inc VAT)

OEM: 70-8134, 36-0382, 01-4117, E8134

5/16" Serrated Lock Washer - Flat Type - Various Uses on Pre Unit and Unit BSA/Triumph Models Shakeproof serrated washer as used to secure bolts -...

Quantity:

+ −

CODE: nut2228-B13

Triumph Dynamo To Gear Case Domed Nut - Pre Unit 350/500/650cc Models - Circa 1946-59

£2.95 (£3.54 inc VAT)

OEM: 70-2228, E2228

Triumph Dynamo To Gear Case Domed Nut - Pre Unit 350/500/650cc Models - Circa 1946-59 Locates in the top right hand side of the timing case. Correct...

Quantity:

+ −

CODE: stud4088-B14

BSA Top Front Engine Mounting Stud - A50 and A65 Models Circa 1964-70

£3.95 (£4.74 inc VAT)

OEM: 68-4088

BSA Top Front Engine Mounting Stud - A50 and A65 Models Circa 1964-70 Locates at the front of the frame between the two down tubes - correct fitment on...

Quantity:

+ −

CODE: stud0456-B18

Triumph Engine Plate / Crankcase Bottom Front Stud - 500/650cc Pre Unit Models From 1946-62

£2.45 (£2.94 inc VAT)

OEM: 57-0456, T456

Triumph Engine Plate / Crankcase Bottom Front Stud - 500/650cc Pre Unit Models From 1946-62 Crankcase bottom front stud - correct fitment on 5T, T100,...

Quantity:

+ −

CODE: screw1647-B13

Triumph Crankcase Inner Boss Joint Screw - Pre Unit 350/500/650cc Models - Circa 1946-62

£2.95 (£3.54 inc VAT)

OEM: 70-1647, E1647

Triumph Crankcase Inner Boss Joint Screw - Pre Unit 350/500/650cc Models - Circa 1946-62 Correct fitment on pre unit 3T, 5T, T100, TR5, 6T, T110, TR6...

Quantity:

+ −

CODE: wash3300-B13

Triumph Crankshaft Timing Pinion Clamping Washer - Pre Unit + 650/750cc Unit Twins From 1954-82

£4.95 (£5.94 inc VAT)

OEM: 70-3300, E3300

Triumph Crankshaft Timing Pinion Clamping Washer - Pre Unit + 650/750cc Unit Twins From 1954-82 Locates between the right hand main bearing and timing...

Quantity:

+ −

CODE: bolt6220-B14

5/16" UNC - 1+3/4" Hexagonal Bolt - Part Threaded - 14-6220

£1.25 (£1.50 inc VAT)

OEM: 14-6220

5/16" UNC - 1+3/4" Hexagonal Bolt - Part Threaded - 14-6220 As used on various Triumph models - crankcase clamping bolt on unit twins and triples circa...

Quantity:

+ −

CODE: dowel1579-B13

Triumph Crankcase Joint Dowel - Pre Unit 350/500/650cc Models Circa 1946-62

£1.95 (£2.34 inc VAT)

OEM: 70-1579, E1579

Triumph Crankcase Joint Dowel - Pre Unit 350/500/650cc Models Circa 1946-62 Crankcase halves dowel - correct fitment on pre unit twins including: 3T, 5T,...

Quantity:

+ −

CODE: dowel8751-B13

Triumph Cylinder Base / Crankcase Halves Hollow Dowel - Pre Unit and Unit Twins and Triples

£1.95 (£2.34 inc VAT)

OEM: 70-8751, 70-1534, E8751, E1534

Triumph Cylinder Base / Crankcase Halves Hollow Dowel - Pre Unit and Unit Twins and Triples Stud to crankcase hollow dowel as used on various models...

Quantity:

+ −

CODE: screw1926-B13

Triumph Crankcase Mouth Screw - Unit 350/500cc Models - Circa 1969-72

£2.45 (£2.94 inc VAT)

OEM: 21-1926, S1926

Triumph Crankcase Mouth Screw - Unit 350/500cc Models - Circa 1969-72 Correct fitment on T90 and T100 models circa 1969-72. Two required per engine -...

Quantity:

+ −

CODE: enginestud-9495-B13

Triumph Alternator Mounting Stator Stud - Unit 350/500cc Models - Circa 1969-72

£9.45 (£11.34 inc VAT)

OEM: 70-9495, E9495

Triumph Alternator Mounting Stator Stud - Unit 350/500cc Models - Circa 1969-72 Stator stud - correct fitment on T90 and T100 models circa 1969-72. Three...

Quantity:

+ −

CODE: bolt1919-B19

5/16" UNC - 1+5/8" Hexagonal Bolt - Part Threaded - 21-1919

£1.95 (£2.34 inc VAT)

OEM: 21-1919, S1919

5/16" UNC - 1+5/8" Hexagonal Bolt - Part Threaded - 21-1919 As used on various Triumph models - drive side crankcase bolt on unit twins from 1969...

Quantity:

+ −

CODE: screwkit-953M-B9

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit T110, T120 and TR6 Models From 1960-62

£37.95 (£45.54 inc VAT)

OEM: E3439, E3437, E3440, E3442, E3438, 70-3439, 70-3437, 70-3440, 70-3442, 70-3438

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit T110, T120 and TR6 Models From 1960-62 Complete set of engine/gearbox screws suitable for...

Quantity:

+ −

CODE: screwkit-952M-B9

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit 5T and 6T Models From 1956-62

£37.95 (£45.54 inc VAT)

OEM: E3439, E3437, E3444, E3442, E3438, 70-3439, 70-3437, 70-3444, 70-3442, 70-3438

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit 5T and 6T Models From 1956-62 Complete set of engine/gearbox screws suitable for later 5T...

Quantity:

+ −

CODE: bolt6505-B14

1/4" UNC x 7/8" Countersunk Screw - Triumph Unit 500cc Models + Universal Use

£0.45 (£0.54 inc VAT)

OEM: 14-6505

1/4" UNC x 7/8" Countersunk Screw - Triumph Unit 500cc Models + Universal Use Flat head slotted screw as used on T100 models from 1969 onwards: Gearbox...

Quantity:

+ −

CODE: wash0644-B18

BSA Crankshaft Gear Side Tab Washer - A50, A65, A7 and A10 Models - 1947 Onwards

£1.25 (£1.50 inc VAT)

OEM: 67-0644, 67-644

BSA Crankshaft Gear Side Tab Washer - A50, A65, A7 and A10 Models - 1947 Onwards Half time pinion lockwasher as used on all A50 and A65 models from...

Quantity:

+ −

CODE: screwkit-951M-B9

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit Dynamo Models Circa 1954-55

£37.95 (£45.54 inc VAT)

OEM: E1049, E427, E2691, T452, E573, 70-1049, 70-0427, 70-2691, 57-0452, 70-0573

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit Dynamo Models Circa 1954-55 Complete set of engine/gearbox screws suitable for 5T, T100,...

Quantity:

+ −

CODE: screwkit-950M-B9

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit Dynamo models Circa 1946-53

£37.95 (£45.54 inc VAT)

OEM: E1049, E427, E2691 , E329. T452, E573, 70-1049, 70-0427, 70-2691, 70-0329, 57-0452, 70-0573

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit Dynamo models Circa 1946-53 Complete set of engine/gearbox screws suitable for 5T, T100,...

Quantity:

+ −

CODE: wash2288

Triumph 3/8" Serrated Lock Washer - T140 Brake Hose / Flywheel + Various Uses

£0.35 (£0.42 inc VAT)

OEM: 70-2288, E2288

Triumph 3/8" Serrated Lock Washer - T140 Brake Hose / Flywheel + Various Uses Shakeproof serrated lock washer as used on many pre unit and unit Triumph...

Quantity:

+ −

CODE: stud1539-B19

Triumph Crankcase Oil Pipe Block Stud - Pre Unit 350/500/650cc Twins From 1939-62

£2.95 (£3.54 inc VAT)

OEM: 70-1539, E1539

Triumph Crankcase Oil Pipe Block Stud - Pre Unit 350/500/650cc Twins From 1939-62 Oil junction block to crankcase stud - correct fitment on pre-unit...

Quantity:

+ −

CODE: stud2022-B19

Triumph Magneto To Crankcase Fixing Stud - Pre Unit 350/500/650cc Models - Circa 1946-62

£1.95 (£2.34 inc VAT)

OEM: 70-2022, E2022

Triumph Magneto To Crankcase Fixing Stud - Pre Unit 350/500/650cc Models - Circa 1946-62 Correct fitment on pre unit 3T, 5T, TR5, 6T, T110, TR6 and T120...

Quantity:

+ −

CODE: studset765-B14

Triumph Crankcase Bolt Set - Unit 650cc Models Circa 1967-68

£19.95 (£23.94 inc VAT)

OEM: 70-4856, 70-5963, 70-2888, 70-4541, 70-4540, 70-4098, E4856, E5963, E2888, E4541, E4540, E4098, S25-3, S1-51

Triumph Crankcase Bolt Set - Unit 650cc Models Circa 1967-68 Complete set of studs, bolts, nuts and washers suitable for T120 and TR6 models from...

Quantity:

+ −

67-0685, 67-685 - BSA Camshaft Pinion Tab Washer - A7, A10, A50 and A65 Models

CODE: tab-0685-B18

BSA Camshaft Pinion Tab Washer - A7 and A10 Models Circa 1947-62 + All A50 and A65 Models

£0.95 (£1.14 inc VAT)

OEM: 67-0685, 67-685

BSA Camshaft Pinion Tab Washer - A7, A10, A50 and A65 Models Camshaft pinion lockwasher - correct fitment on A7 and A10 models circa 1947-62. Also used...

Quantity:

+ −

CODE: stud3114-B19

Triumph Crankshaft / Rotor Mounting Stud - Pre Unit and Unit Models Circa 1959-73

£2.95 (£3.54 inc VAT)

OEM: 70-3114, E3114

Triumph Crankshaft / Rotor Mounting Stud - Pre Unit and Unit Models Circa 1959-73 Drive side crankshaft to alternator rotor stud - later pre unit...

Quantity:

+ −

CODE: wash3770-B13

Triumph Serrated Gearbox Clamp Washer - Pre Unit 500/650cc Models Circa 1956-62

£2.45 (£2.94 inc VAT)

OEM: 82-3770, F3770

Triumph Serrated Gearbox Clamp Washer - Pre Unit 500/650cc Models Circa 1956-62 Serrated clamping washer, fits on the top gearbox mounting stud to...

Quantity:

+ −

CODE: bolt0011-B19

BSA M20/M21 Cylinder Head Bolt - Circa 1937-63 - Long Type

£5.95 (£7.14 inc VAT)

OEM: 36-0011, 36-11

BSA M20/M21 Cylinder Head Bolt - Circa 1937-63 - Long Type High quality BZP plated high tensile bolt. 10 required for models from 1950 onwards. Earlier...

Quantity:

+ −

CODE: nut0124-B14

1/2" x 20 CEI Thin Nut - BSA Camshaft Pinion Nut + Hub Spindle Lock Nut - Various Uses

£3.45 (£4.14 inc VAT)

OEM: 02-0124, 2-124, 27-6716

1/2" x 20 CEI Thin Nut - BSA Camshaft Pinion Nut + Hub Spindle Lock Nut - Various Uses Used to secure the camshaft gear on A7 and A10 models + some early...

Quantity:

+ −

CODE: nut-DS48-B14

1/2" x 20 CEI Standard Nut - Various Uses on BSA, Triumph and AMC Models

£1.95 (£2.34 inc VAT)

OEM: DS48, DS-48, 02-0052, 99-3557, 15-5753

1/2" x 20 CEI Standard Nut - Various Uses on BSA, Triumph and AMC Models Used extensively on many frame, bolts and stud fixing points. Gearbox mounting,...

Quantity:

+ −

CODE: bolts4470-B14

BSA Engine Mounting Bolts x3 - A Group Rigid, Plunger and Swinging Arm Models Circa 1950-62

£8.45 (£10.14 inc VAT)

OEM: 42-4470, 67-0350, 67-350

BSA Engine Mounting Bolts x3 - A Group Rigid, Plunger and Swinging Arm Models Circa 1950-62 Set of three engine plate tie bolts, suitable to replace the...

Quantity:

+ −

CODE: nut1292-B14

BSA Top Front Engine Stud Sleeve Nut - A Group Rigid, Plunger and Swinging Arm Models Circa 1947-62

£3.45 (£4.14 inc VAT)

OEM: 67-1292

BSA Top Front Engine Stud Sleeve Nut - A Group Rigid, Plunger and Swinging Arm Models Circa 1947-62 Engine plate tie extended nut, correct fitment on all...

Quantity:

+ −

CODE: stud6276-B14

BSA Lower Front Engine Mounting Stud - A Group Swinging Arm Models Circa 1954-62

£3.45 (£4.14 inc VAT)

OEM: 27-6276

BSA Lower Front Engine Mounting Stud - A Group Swinging Arm Models Circa 1954-62 Engine plate to frame lower tie stud, correct fitment on A7 and A10...

Quantity:

+ −

82-1680, F1680 - Triumph Lower Frame to Engine Plate Stud - Pre Unit 500/650cc Models Circa 1956-59

CODE: stud1680-B19

Triumph Lower Frame to Engine Plate Stud - Pre Unit 500/650cc Models Circa 1946-59

£3.45 (£4.14 inc VAT)

OEM: 82-1680, F1680

Triumph Lower Frame to Engine Plate Stud - Pre Unit 500/650cc Models Circa 1946-59 Bottom frame to engine mounting stud, correct fitment on T100, 6T,...

Quantity:

+ −

82-3108, F3108 - Triumph Rear Engine Plate to Frame Bolt - Pre Unit 500/650cc Models Circa 1956-59

CODE: bolt3108-B19

Triumph Rear Engine Plate to Frame Bolt - Pre Unit 500/650cc Models Circa 1951-59

£6.95 (£8.34 inc VAT)

OEM: 82-3108, F3108

Triumph Rear Engine Plate to Frame Bolt - Pre Unit 500/650cc Models Circa 1951-59 Frame to lower gearbox bolt, correct fitment on T100, 6T, T110, T120,...

Quantity:

+ −

CODE: wash1612

Triumph 1/4" Serrated Lock Washer - Flat Type - Various Uses on Pre Unit and Unit Models

£0.15 (£0.18 inc VAT)

OEM: 70-1612, E1612, 70-2312, E2312

Triumph 1/4" Serrated Lock Washer - Flat Type - Various Uses on Pre Unit and Unit Models Shakeproof serrated washer as used to secure bolts - engine,...

Quantity:

+ −

DS47, DS-47 - 7/16" x 26 CEI Half Nut - Various Uses on Pre Unit Triumph Models

CODE: nut-DS47-B14

7/16" x 26 CEI Half Nut - Various Uses on Pre Unit and Unit Triumph Models

£1.75 (£2.10 inc VAT)

OEM: DS47, DS-47

7/16" x 26 CEI Half Nut - Various Uses on Pre Unit Triumph Models Used extensively on many frame, bolts and stud fixing points. Gearbox mounting,...

Quantity:

+ −

82-3575, F3575 - Triumph Gearbox Pivot Bolt - Pre Unit 500/650cc Models Circa 1956-59

CODE: bolt3575-B14

Triumph Gearbox Pivot Bolt - Pre Unit 500/650cc Models Circa 1954-59

£11.95 (£14.34 inc VAT)

OEM: 82-3575, F3575

Triumph Gearbox Pivot Bolt - Pre Unit 500/650cc Models Circa 1954-59 Threaded mounting stud, correct fitment on T100, 6T, T110, T120, TR6 models. Length...

Quantity:

+ −

CODE: stud3769-B14

Triumph Gearbox Top Mounting Stud - Pre Unit 500/650cc Models Circa 1956-62

£2.95 (£3.54 inc VAT)

OEM: 82-3769, F3769

Triumph Gearbox Top Mounting Stud - Pre Unit 500/650cc Models Circa 1956-62 Threaded mounting stud, correct fitment on T100, 6T, T110, T120, TR6 models....

Quantity:

+ −

CODE: bolt3767-B13

Triumph Gearbox Adjuster Pivot Pin - Pre Unit 500/650cc Models Circa 1956-59

£5.95 (£7.14 inc VAT)

OEM: 82-3767, F3767

Triumph Gearbox Adjuster Pivot Pin - Pre Unit 500/650cc Models Circa 1956-59 Abutment pin to fit T100, 6T, T110, T120, TR6 models circa 1956-59. Made in...

Quantity:

+ −

70-0672, E672 - Triumph Plain Cylinder Base Stud - Pre Unit 500/650cc and Unit 650cc Models

CODE: stud0672-B19

Triumph Cylinder Base Stud - Pre Unit 500/650cc and Unit 650cc Models

£2.45 (£2.94 inc VAT)

OEM: 70-0672, E672

Triumph Cylinder Base Stud - Pre Unit 500/650cc and Unit 650cc Models Correct fitment on many pre unit twins - 5T, TR5, 6T, T110, TR6, T120 circa...

Quantity:

+ −

CODE: stud3523-B14

Triumph Grooved Cylinder Base Stud - Pre Unit 500/650cc and Unit 650cc Models

£2.45 (£2.94 inc VAT)

OEM: 70-3523, E3523

Triumph Grooved Cylinder Base Stud - Pre Unit 500/650cc and Unit 650cc Models Correct fitment on many pre unit twins - 5T, TR5, 6T, T110, TR6, T120 circa...

Quantity:

+ −

CODE: nut3971-B13

Alternator Rotor Nut - Triumph T20 Tiger Cub Models From 1959 Onwards

£7.95 (£9.54 inc VAT)

OEM: 70-3971, E3971

Alternator Rotor Nut - Triumph T20 Tiger Cub Models From 1959 Onwards To secure the alternator rotor on the shaft. Length UH: 3/4" (19mm) OD: 9/16"...

Quantity:

+ −

CODE: enginestud-4537-B13

Triumph Short Alternator Mounting Stator Stud - 650cc Models Circa 1963-68

£5.45 (£6.54 inc VAT)

OEM: 70-4537, E4537

Triumph Short Alternator Mounting Stator Stud - 650cc Models Circa 1963-68 Rear stator stud, correct fitment on unit 6T, T120 and TR6 models circa...

Quantity:

+ −

CODE: enginestud-4536-B13

Triumph Long Alternator Mounting Stator Stud - 650cc Models Circa 1963-68

£8.45 (£10.14 inc VAT)

OEM: 70-4536, E4536

Triumph Long Alternator Mounting Stator Stud - 650cc Models Circa 1963-68 Front stator stud, correct fitment on unit 6T, T120 and TR6 models circa...

Quantity:

+ −

CODE: studs602-B18

Triumph Cylinder Base Stud Set - 750cc Models - Circa 1973-82

£10.95 (£13.14 inc VAT)

OEM: 21-1865, S1865, 71-3013, E13013

Triumph Cylinder Base Stud Set - 750cc Models - Circa 1973-82 Correct fitment on Triumph T140 and TR7 models. Set includes 8 cylinder base studs - 4x...

Quantity:

+ −

CODE: studs601-B14

Triumph Cylinder Base Stud Set - 650cc Models - Circa 1968-72

£10.95 (£13.14 inc VAT)

OEM: 21-1865, S1865

Triumph Cylinder Base Stud Set - 650cc Models - Circa 1968-72 Correct fitment on Triumph T120 and TR6 models. Set includes 8 cylinder base studs - 12...

Quantity:

+ −

CODE: nut6523-B13

Triumph Exhaust Camshaft Nut LH Thread - Unit 500/650/750cc Models - Circa 1970-87

£4.95 (£5.94 inc VAT)

OEM: 70-6523, E6523

Triumph Exhaust Camshaft Nut LH Thread - Unit 500/650/750cc Models - Circa 1970-87 Exhaust camshaft retaining nut on all 650/750cc twins from 1970 onwards...

Quantity:

+ −

CODE: nut3120-B14

Triumph Crankshaft Drive Side Nut - Pre Unit 500/650cc Dynamo Models - Circa 1953-59

£5.45 (£6.54 inc VAT)

OEM: 70-3120, E3120

Triumph Crankshaft Drive Side Nut - Pre Unit 500/650cc Dynamo Models - Circa 1953-59 Engine sprocket nut as used on pre-unit T100, TR5, T110, TR6 and...

Quantity:

+ −

CODE: wash3887

Triumph Oil Pump Mounting Serrated Washer - Conical Type - 350/500/650/750cc Unit Twins

£0.45 (£0.54 inc VAT)

OEM: 70-3887, E3887

Triumph Oil Pump Mounting Serrated Washer - Conical Type - 350/500/650/750cc Unit Twins Correct for all unit twins - 3TA, 5TA, T90, T100, 6T, TR6, T120,...

Quantity:

+ −

CODE: nut0702-B14

Triumph Alternator / Carb Manifold Mounting Nut - Unit Twins - 1969 Onwards

£1.45 (£1.74 inc VAT)

OEM: 14-0702

Triumph Alternator / Carb Manifold Mounting Nut - Unit Twins - 1969 Onwards For mounting the alternator stator on the primary chaincase on 500/650/750cc...

Quantity:

+ −

CODE: nut3955-B14

3/8" CEI Self-Locking Nyloc Nut

£0.65 (£0.78 inc VAT)

OEM: 82-3955, F3955

3/8" CEI Self-Locking Nyloc Nut 3/8" CEI self-locking nyloc nut. deep type - 26TPI OEM: 82-3955, F3955

Quantity:

+ −

CODE: nut1463-B13

Triumph Inlet Camshaft Oil Pump Drive Nut - Pre Unit 500/650cc Twins - Circa 1946-61

£8.95 (£10.74 inc VAT)

OEM: 70-1463, E1463

Triumph Inlet Camshaft Oil Pump Drive Nut - Pre Unit 500/650cc Twins - Circa 1946-61 Correct fitment for earlier pre-unit twins - 3TA, 5T, T100, 6T,...

Quantity:

+ −

CODE: nut0643-B18

BSA Crankshaft Timing Side Pinion Drive Nut - A50, A65, A7, A10 Models - LH Thread

£4.95 (£5.94 inc VAT)

OEM: 67-0643, 67-643

BSA Crankshaft Timing Side Pinion Drive Nut - A50, A65, A7, A10 Models - LH Thread Half time pinion gear locknut as used on all BSA A50/A65 models from...

Quantity:

+ −

CODE: stud1536-B13

Triumph Crankcase to Oil Pump Stud - Pre Unit 350/500/650cc Twins From 1939-62

£2.25 (£2.70 inc VAT)

OEM: 70-1536, E1536

Triumph Crankcase to Oil Pump Stud - Pre Unit 350/500/650cc Twins From 1939-62 Oil pump body to crankcase fixing stud - Correct fitment on pre-unit twins...

Quantity:

+ −

CODE: bolt-set0078-B14

Triumph Pre-Unit Engine Mounting Stud / Bolt Set - 500/650cc Models from 1954-59

£56.95 (£68.34 inc VAT)

OEM: 00-0078

Triumph Pre-Unit Engine Mounting Stud / Bolt Set - 500/650cc Models from 1954-59 To mount the engine and gearbox in pre-unit models with a single...

Quantity:

+ −

CODE: bolt-set9948-B14

Triumph Cylinder Head Complete Bolt Set - 650cc Unit Twins to 1970

£59.95 (£71.94 inc VAT)

OEM: 70-1596, E1596, 70-4771, E4771, 70-0327, E327, 70-2982, E2982, 21-1875, S1875, 57-1553, T1553

Triumph Cylinder Head Complete Bolt Set - 650cc Unit Twins to 1970 Complete set of bolts and washers as follows: 1x 70-4771 Centre head bolt - 5/16" x...

Quantity:

+ −

CODE: bolt0241-B19

Triumph T140, TR7 Cylinder Head Bolt - UNF Thread

£2.45 (£2.94 inc VAT)

OEM: 14-0241

Triumph T140, TR7 Cylinder Head Bolt - UNF Thread Length UH: 3+1/2" (88.6mm) Diameter: 3/8" UNF thread OEM: 14-0241

Quantity:

+ −

CODE: bolt-set3797-B14

Triumph T120/TR6 Cylinder Head Bolt and Stud Set - 9 Stud Models from 1963-70

£67.95 (£81.54 inc VAT)

OEM: 70-0327, E327, 83-2184, F2184, 70-4771, E4771, 70-1596, E1596, 70-2989, E2989, 83-0879, F879, 70-3302, E3302

Triumph T120/TR6 Cylinder Head Bolt and Stud Set - 9 Stud Models from 1963-70 Complete set of bolts, studs washers and nuts as follows: 4x 70-0327, E327...

Quantity:

+ −

CODE: bolt3552-B13

Crankshaft Flywheel Bolt - Triumph T140, TR7 From 1973-1982

£3.95 (£4.74 inc VAT)

OEM: 71-3552, E13552

Crankshaft Flywheel Bolt - Triumph T140, TR7 From 1973-1982 Flywheel to crankshaft bolt as used on Triumph 750cc twins - 3 required. Length UH: 1+7/16"...

Quantity:

+ −

CODE: nut1007-B18

Triumph Inlet Camshaft Oil Pump Drive Nut - 500/650/750cc Twins - 1970-83

£9.95 (£11.94 inc VAT)

OEM: 71-1007, E11007

Triumph Inlet Camshaft Oil Pump Drive Nut - 500/650/750cc Twins - 1970-83 Correct fitment for 650 and 750 Twins from 1970-1983. Also fits Triumph 500...

Quantity:

+ −

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Bolts & Nuts

Bestsellers Bestsellers

Account Details

Quick Links

Feked.com

Feked Online