Engine & Transmission :: Engine Lower

CODE: bolt-set0074-B14

Triumph Engine Mounting Stud / Bolt Set - Unit 650cc Models from 1963-67

£72.95 (£87.54 inc VAT)

OEM: 00-0074, 82-5469, 82-6498, 82-5532, 82-3805, 82-3069

Triumph Engine Mounting Stud / Bolt Set - Unit 650cc Models from 1963-67 Engine to frame mounting bolts, studs, spacers and fixings. Suitable for 6T, TR6...

Quantity:

+ −

CODE: bolt-set3797-B14

Triumph T120/TR6 Cylinder Head Bolt and Stud Set - 9 Stud Models from 1963-70

£67.95 (£81.54 inc VAT)

OEM: 70-0327, E327, 83-2184, F2184, 70-4771, E4771, 70-1596, E1596, 70-2989, E2989, 83-0879, F879, 70-3302, E3302

Triumph T120/TR6 Cylinder Head Bolt and Stud Set - 9 Stud Models from 1963-70 Complete set of bolts, studs washers and nuts as follows: 4x 70-0327, E327...

Quantity:

+ −

CODE: bolt-set9948-B14

Triumph Cylinder Head Complete Bolt Set - 650cc Unit Twins to 1970

£59.95 (£71.94 inc VAT)

OEM: 70-1596, E1596, 70-4771, E4771, 70-0327, E327, 70-2982, E2982, 21-1875, S1875, 57-1553, T1553

Triumph Cylinder Head Complete Bolt Set - 650cc Unit Twins to 1970 Complete set of bolts and washers as follows: 1x 70-4771 Centre head bolt - 5/16" x...

Quantity:

+ −

CODE: bolt-set0078-B14

Triumph Pre-Unit Engine Mounting Stud / Bolt Set - 500/650cc Models from 1954-59

£56.95 (£68.34 inc VAT)

OEM: 00-0078

Triumph Pre-Unit Engine Mounting Stud / Bolt Set - 500/650cc Models from 1954-59 To mount the engine and gearbox in pre-unit models with a single...

Quantity:

+ −

CODE: screwkit-950M-B9

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit Dynamo models Circa 1946-53

£37.95 (£45.54 inc VAT)

OEM: E1049, E427, E2691 , E329. T452, E573, 70-1049, 70-0427, 70-2691, 70-0329, 57-0452, 70-0573

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit Dynamo models Circa 1946-53 Complete set of engine/gearbox screws suitable for 5T, T100,...

Quantity:

+ −

CODE: screwkit-951M-B9

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit Dynamo Models Circa 1954-55

£37.95 (£45.54 inc VAT)

OEM: E1049, E427, E2691, T452, E573, 70-1049, 70-0427, 70-2691, 57-0452, 70-0573

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit Dynamo Models Circa 1954-55 Complete set of engine/gearbox screws suitable for 5T, T100,...

Quantity:

+ −

CODE: screwkit-952M-B9

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit 5T and 6T Models From 1956-62

£37.95 (£45.54 inc VAT)

OEM: E3439, E3437, E3444, E3442, E3438, 70-3439, 70-3437, 70-3444, 70-3442, 70-3438

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit 5T and 6T Models From 1956-62 Complete set of engine/gearbox screws suitable for later 5T...

Quantity:

+ −

CODE: screwkit-953M-B9

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit T110, T120 and TR6 Models From 1960-62

£37.95 (£45.54 inc VAT)

OEM: E3439, E3437, E3440, E3442, E3438, 70-3439, 70-3437, 70-3440, 70-3442, 70-3438

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit T110, T120 and TR6 Models From 1960-62 Complete set of engine/gearbox screws suitable for...

Quantity:

+ −

CODE: bolt742-B14

Triumph 9 Piece Cylinder Head Bolt Set - 650cc

£23.95 (£28.74 inc VAT)

Triumph High Tensile 9 piece Cylinder Head Bolt Set for TR6/T120 Unit models. Suit most later Triumgh twin 650cc 1x 70-4771 Centre head bolt - 5/16" x 3" x...

Quantity:

+ −

CODE: bolt-set0011-B14

Cylinder Head Bolt Set - BSA M20/M21 Alloy Head - 1950 Onwards

£23.95 (£28.74 inc VAT)

OEM: 36-0011, 36-11

Cylinder Head Bolt Set - BSA M20/M21 Alloy Head - 1950 Onwards High quality BZP plated high tensile bolts with correct shanks for use with alloy heads...

Quantity:

+ −

CODE: bolt741-B14

Triumph 8 piece Cylinder Head Bolt Set - 650cc pre-unit

£21.95 (£26.34 inc VAT)

OEM: E2873, 70-2873, E2874, 70-2874, E1596A, 70-1596A

Triumph High Tensile Alloy 8 piece Cylinder Head bolt set for Triumph T110/T120 Pre-unit models (1957-62). Suit most early Triumph twin 650cc OEM: E2873,...

Quantity:

+ −

CODE: bolt410

BSA Engine/Gearbox Mounting Bolt Set - B Group Swinging Arm Models

£19.95 (£23.94 inc VAT)

BSA Engine/Gearbox Mounting Bolt Set - B Group Swinging Arm Models 9 Pieces

Quantity:

+ −

CODE: studset765-B14

Triumph Crankcase Bolt Set - Unit 650cc Models Circa 1967-68

£19.95 (£23.94 inc VAT)

OEM: 70-4856, 70-5963, 70-2888, 70-4541, 70-4540, 70-4098, E4856, E5963, E2888, E4541, E4540, E4098, S25-3, S1-51

Triumph Crankcase Bolt Set - Unit 650cc Models Circa 1967-68 Complete set of studs, bolts, nuts and washers suitable for T120 and TR6 models from...

Quantity:

+ −

CODE: bolt752-B14

Engine Bolt set for BSA A7, A10 models

£18.95 (£22.74 inc VAT)

Engine/Gearbox Mounting Bolt Set BSA A10, A7 Swinging Arm models 10 piece UK Version: does not have nuts on 4 of the bolts

Select Options

CODE: bolt282-B14

Cylinder Head Bolt Set - BSA A10 - 00-0123

£18.95 (£22.74 inc VAT)

OEM: 00-0123

Cylinder Head Bolt Set - BSA A10 - 00-0123 BSA A10SR/A10RGS Alloy head cylinder head bolt set. High quality BZP plated High Tensile bolts with correct...

Quantity:

+ −

82-3575, F3575 - Triumph Gearbox Pivot Bolt - Pre Unit 500/650cc Models Circa 1956-59

CODE: bolt3575-B14

Triumph Gearbox Pivot Bolt - Pre Unit 500/650cc Models Circa 1954-59

£11.95 (£14.34 inc VAT)

OEM: 82-3575, F3575

Triumph Gearbox Pivot Bolt - Pre Unit 500/650cc Models Circa 1954-59 Threaded mounting stud, correct fitment on T100, 6T, T110, T120, TR6 models. Length...

Quantity:

+ −

CODE: studs601-B14

Triumph Cylinder Base Stud Set - 650cc Models - Circa 1968-72

£10.95 (£13.14 inc VAT)

OEM: 21-1865, S1865

Triumph Cylinder Base Stud Set - 650cc Models - Circa 1968-72 Correct fitment on Triumph T120 and TR6 models. Set includes 8 cylinder base studs - 12...

Quantity:

+ −

CODE: studs602-B18

Triumph Cylinder Base Stud Set - 750cc Models - Circa 1973-82

£10.95 (£13.14 inc VAT)

OEM: 21-1865, S1865, 71-3013, E13013

Triumph Cylinder Base Stud Set - 750cc Models - Circa 1973-82 Correct fitment on Triumph T140 and TR7 models. Set includes 8 cylinder base studs - 4x...

Quantity:

+ −

CODE: washer4075-B13

BSA Gearbox Locking Washer - 42-4075

£9.95 (£11.94 inc VAT)

OEM: 42-4075

BSA Gearbox Locking Washer - 42-4075 Used on the BSA A10 and A7 gearbox to frame. OEM: 42-4075

Quantity:

+ −

CODE: nut1007-B18

Triumph Inlet Camshaft Oil Pump Drive Nut - 500/650/750cc Twins - 1970-83

£9.95 (£11.94 inc VAT)

OEM: 71-1007, E11007

Triumph Inlet Camshaft Oil Pump Drive Nut - 500/650/750cc Twins - 1970-83 Correct fitment for 650 and 750 Twins from 1970-1983. Also fits Triumph 500...

Quantity:

+ −

CODE: nut5664-B13

BSA Gearbox Adjuster Nut - A, B and M Group - Rigid, Plunger and Swinging Arm Models

£9.95 (£11.94 inc VAT)

OEM: 15-5664

BSA Gearbox Adjuster Nut - A, B and M Group - Rigid, Plunger and Swinging Arm Models Gearbox adjusting bolt nut - correct fitment on swinging arm A7,...

Quantity:

+ −

CODE: enginestud-9495-B13

Triumph Alternator Mounting Stator Stud - Unit 350/500cc Models - Circa 1969-72

£9.45 (£11.34 inc VAT)

OEM: 70-9495, E9495

Triumph Alternator Mounting Stator Stud - Unit 350/500cc Models - Circa 1969-72 Stator stud - correct fitment on T90 and T100 models circa 1969-72. Three...

Quantity:

+ −

CODE: nut1463-B13

Triumph Inlet Camshaft Oil Pump Drive Nut - Pre Unit 500/650cc Twins - Circa 1946-61

£8.95 (£10.74 inc VAT)

OEM: 70-1463, E1463

Triumph Inlet Camshaft Oil Pump Drive Nut - Pre Unit 500/650cc Twins - Circa 1946-61 Correct fitment for earlier pre-unit twins - 3TA, 5T, T100, 6T,...

Quantity:

+ −

CODE: enginestud-4536-B13

Triumph Long Alternator Mounting Stator Stud - 650cc Models Circa 1963-68

£8.45 (£10.14 inc VAT)

OEM: 70-4536, E4536

Triumph Long Alternator Mounting Stator Stud - 650cc Models Circa 1963-68 Front stator stud, correct fitment on unit 6T, T120 and TR6 models circa...

Quantity:

+ −

CODE: bolts4470-B14

BSA Engine Mounting Bolts x3 - A Group Rigid, Plunger and Swinging Arm Models Circa 1950-62

£8.45 (£10.14 inc VAT)

OEM: 42-4470, 67-0350, 67-350

BSA Engine Mounting Bolts x3 - A Group Rigid, Plunger and Swinging Arm Models Circa 1950-62 Set of three engine plate tie bolts, suitable to replace the...

Quantity:

+ −

CODE: enginestud-1866-B19

Long Alternator Mounting Stud Triumph 650 Twins - 1969-74

£7.95 (£9.54 inc VAT)

OEM: 21-1866

Long Alternator Mounting Stud Triumph 650 Twins - 1969-74 Fits later 650 Twins from 1969-74 Made in England OEM: 21-1866

Quantity:

+ −

CODE: nut3971-B13

Alternator Rotor Nut - Triumph T20 Tiger Cub Models From 1959 Onwards

£7.95 (£9.54 inc VAT)

OEM: 70-3971, E3971

Alternator Rotor Nut - Triumph T20 Tiger Cub Models From 1959 Onwards To secure the alternator rotor on the shaft. Length UH: 3/4" (19mm) OD: 9/16"...

Quantity:

+ −

CODE: nut569-B18

Crankshaft Alternator Nut - BSA - 29-2023

£6.95 (£8.34 inc VAT)

OEM: 29-2023, 29-2053

Crankshaft Alternator Nut for BSA C11/C15/B31/B44/B50/A50/A65 Crankshaft Alternator Nut for BSA C11/C15/B31/B44/B50/A50/A65 models. 5/8" CEI thread....

Quantity:

+ −

CODE: bolt992-B19

Triumph 3TA, 5TA Bottom Engine Stud - 70-3812

£6.95 (£8.34 inc VAT)

OEM: 70-3812, E3812

Triumph 3TA, 5TA Bottom Engine Stud (1955-60) OEM: 70-3812, E3812

Quantity:

+ −

CODE: nut0398-B18

Triumph Crankshaft Timing Pinion Nut - 500/650cc Pre-Unit Models

£6.95 (£8.34 inc VAT)

OEM: 70-0398, E398

Triumph Crankshaft Timing Pinion Nut - 500/650cc Pre-Unit Models 3/4" x 20 TPI - Stainless steel OEM: 70-0398, E398

Quantity:

+ −

82-3108, F3108 - Triumph Rear Engine Plate to Frame Bolt - Pre Unit 500/650cc Models Circa 1956-59

CODE: bolt3108-B19

Triumph Rear Engine Plate to Frame Bolt - Pre Unit 500/650cc Models Circa 1951-59

£6.95 (£8.34 inc VAT)

OEM: 82-3108, F3108

Triumph Rear Engine Plate to Frame Bolt - Pre Unit 500/650cc Models Circa 1951-59 Frame to lower gearbox bolt, correct fitment on T100, 6T, T110, T120,...

Quantity:

+ −

CODE: gbox008-B18

Triumph Crankshaft Timing Pinion Nut - Unit 650cc Models Circa 1963-71

£5.95 (£7.14 inc VAT)

OEM: 70-4565, E4565

Triumph Crankshaft Timing Pinion Nut - Unit 650cc Models Circa 1963-71 Correct fitment on unit 6T, T120 and TR6 models. OEM: 70-4565, E4565

Quantity:

+ −

CODE: bolt736H-B19

Triumph T140 Cylinder Head Stud - 21-2201

£5.95 (£7.14 inc VAT)

OEM: 21-2201

Triumph T140 Cylinder head stud (outer 3/8" Stud) OEM: 21-2201

Quantity:

+ −

CODE: hd-bolt3794-B14

Triumph T90/T100 Cylinder head bolt - 70-3794

£5.95 (£7.14 inc VAT)

OEM: 70-3794

Triumph T90/T100 Cylinder Head bolt (centre without torque stay) OEM: 70-3794

Quantity:

+ −

CODE: enginestud-2199-B19

Long Alternator/Stator Stud Triumph 750 Twins - 1972-82

£5.95 (£7.14 inc VAT)

OEM: 21-2199

Long Alternator/Stator Stud Triumph 750 Twins - 1972-82 Alternator Stator Stud suitable for 750cc Triumph T140 Bonneville & TR7 models from...

Quantity:

+ −

CODE: bolt3767-B13

Triumph Gearbox Adjuster Pivot Pin - Pre Unit 500/650cc Models Circa 1956-59

£5.95 (£7.14 inc VAT)

OEM: 82-3767, F3767

Triumph Gearbox Adjuster Pivot Pin - Pre Unit 500/650cc Models Circa 1956-59 Abutment pin to fit T100, 6T, T110, T120, TR6 models circa 1956-59. Made in...

Quantity:

+ −

CODE: bolt0011-B19

BSA M20/M21 Cylinder Head Bolt - Circa 1937-63 - Long Type

£5.95 (£7.14 inc VAT)

OEM: 36-0011, 36-11

BSA M20/M21 Cylinder Head Bolt - Circa 1937-63 - Long Type High quality BZP plated high tensile bolt. 10 required for models from 1950 onwards. Earlier...

Quantity:

+ −

70-2873, E2873 - Triumph Short Cylinder Head Bolt Set - Pre Unit 500/650cc Alloy Head Models Circa 1951-62

CODE: bolt2873-B19

Triumph Short Cylinder Head Bolt - Pre Unit 500/650cc Alloy Head Models Circa 1951-62

£5.95 (£7.14 inc VAT)

OEM: 70-2873, E2873

Triumph Short Cylinder Head Bolt Set - Pre Unit 500/650cc Alloy Head Models Circa 1951-62 High tensile outer fixing cylinder head bolt as used on alloy...

Quantity:

+ −

70-2874, E2874 - Triumph Long Cylinder Head Bolt Set - Pre Unit 500/650cc Alloy Head Models Circa 1951-62

CODE: bolt2874-B19

Triumph Long Cylinder Head Bolt - Pre Unit 500/650cc Alloy Head Models Circa 1951-62

£5.95 (£7.14 inc VAT)

OEM: 70-2874, E2874

Triumph Long Cylinder Head Bolt Set - Pre Unit 500/650cc Alloy Head Models Circa 1951-62 High tensile inner fixing cylinder head bolt as used on alloy...

Quantity:

+ −

CODE: nut3117-B13

Triumph Alternator Rotor Nut - Pre Unit 5T and 6T Models Circa 1953-54

£5.95 (£7.14 inc VAT)

OEM: 70-3117, E3117

Triumph Alternator Rotor Nut - Pre Unit 5T and 6T Models Circa 1953-54 Sleeve nut used to secure the alternator rotor on the shaft. Correct fitment on...

Quantity:

+ −

CODE: nut2053-B13

BSA/Triumph Alternator Rotor Nut - Shouldered - C12, C15, B25, B40, B44, B50 and TR25W Models

£5.95 (£7.14 inc VAT)

OEM: 29-2053, 70-8146

BSA/Triumph Alternator Rotor Nut - Shouldered - C12, C15, B25, B40, B44, B50 and TR25W Models Flanged nut used to secure the alternator rotor on the...

Quantity:

+ −

CODE: enginestud-6498-B14

Triumph Bottom Engine Mounting Stud - Unit 650cc Models Circa 1963-70

£5.95 (£7.14 inc VAT)

OEM: 82-6498, F6498

Triumph Bottom Engine Mounting Stud - Unit 650cc Models Circa 1963-70 Engine to frame lowwer mounting stud as used on T120 and TR6 models up to 1970....

Quantity:

+ −

CODE: nut3120-B14

Triumph Crankshaft Drive Side Nut - Pre Unit 500/650cc Dynamo Models - Circa 1953-59

£5.45 (£6.54 inc VAT)

OEM: 70-3120, E3120

Triumph Crankshaft Drive Side Nut - Pre Unit 500/650cc Dynamo Models - Circa 1953-59 Engine sprocket nut as used on pre-unit T100, TR5, T110, TR6 and...

Quantity:

+ −

CODE: enginestud-4537-B13

Triumph Short Alternator Mounting Stator Stud - 650cc Models Circa 1963-68

£5.45 (£6.54 inc VAT)

OEM: 70-4537, E4537

Triumph Short Alternator Mounting Stator Stud - 650cc Models Circa 1963-68 Rear stator stud, correct fitment on unit 6T, T120 and TR6 models circa...

Quantity:

+ −

CODE: enginestud-2198-B19

Short Alternator/Stator Stud Triumph 750 Twins - 1972-82

£4.95 (£5.94 inc VAT)

OEM: 21-2198

Short Alternator/Stator Stud Triumph 750 Twins - 1972-82 Alternator Stator Stud suitable for 750cc Triumph T140 Bonneville & TR7 models from 1972-82....

Quantity:

+ −

CODE: nut1492-B13

Triumph Exhaust Camshaft Nut LH Thread - 500/650cc Pre-Unit Twins

£4.95 (£5.94 inc VAT)

OEM: 70-1492, E1492

Triumph Exhaust Camshaft Nut LH Thread - 500/650cc Pre-Unit Twins Camshaft retaining nut. 5/8" 20 TPI with left hand thread. OEM: 70-1492, E1492

Quantity:

+ −

CODE: nut0643-B18

BSA Crankshaft Timing Side Pinion Drive Nut - A50, A65, A7, A10 Models - LH Thread

£4.95 (£5.94 inc VAT)

OEM: 67-0643, 67-643

BSA Crankshaft Timing Side Pinion Drive Nut - A50, A65, A7, A10 Models - LH Thread Half time pinion gear locknut as used on all BSA A50/A65 models from...

Quantity:

+ −

CODE: nut6523-B13

Triumph Exhaust Camshaft Nut LH Thread - Unit 500/650/750cc Models - Circa 1970-87

£4.95 (£5.94 inc VAT)

OEM: 70-6523, E6523

Triumph Exhaust Camshaft Nut LH Thread - Unit 500/650/750cc Models - Circa 1970-87 Exhaust camshaft retaining nut on all 650/750cc twins from 1970 onwards...

Quantity:

+ −

CODE: wash3300-B13

Triumph Crankshaft Timing Pinion Clamping Washer - Pre Unit + 650/750cc Unit Twins From 1954-82

£4.95 (£5.94 inc VAT)

OEM: 70-3300, E3300

Triumph Crankshaft Timing Pinion Clamping Washer - Pre Unit + 650/750cc Unit Twins From 1954-82 Locates between the right hand main bearing and timing...

Quantity:

+ −

CODE: bolt3809-B13

Triumph Rocker Oil Feed Bolt - Unit 350/500cc Models Circa 1958-74

£4.95 (£5.94 inc VAT)

OEM: 70-3809, E3809

Triumph Rocker Oil Feed Bolt - Unit 350/500cc Models Circa 1958-74 Oil feed pipe retaining bolt - correct fitment on 3TA, 5TA, T90 and T100 models from...

Quantity:

+ −

CODE: nut1593-A17

BSA Bantam Alternator Stator Sleeve Nut - D10, D14 and B175 Models

£4.95 (£5.94 inc VAT)

OEM: 90-1593

BSA Bantam Alternator Stator Sleeve Nut - D10, D14 and B175 Models Hexagonal front alternator mounting sleeve nut suitable for bikes running the original...

Quantity:

+ −

CODE: bolt206-B19

Triumph 650/750cc Twin - Cylinder Head Bolt - 21-2206

£4.45 (£5.34 inc VAT)

OEM: 21-2206

Triumph 650cc and 750cc Twin - Cylinder Head Bolt 3/5" UNF OEM: 21-2206

Quantity:

+ −

CODE: nut3772-B13

Triumph Gearbox Adjuster Sleeve Nut - Pre Unit 500/650cc Models Circa 1955-62

£4.45 (£5.34 inc VAT)

OEM: 82-3772, F3772

Triumph Gearbox Adjuster Sleeve Nut - Pre Unit 500/650cc Models Circa 1955-62 Timing side sleeve nut - locates on the gearbox top clamp stud to position...

Quantity:

+ −

CODE: nut3771-B13

Triumph Gearbox Clamp Flanged Nut - Drive Side - Pre Unit 500/650cc Models Circa 1955-62

£4.45 (£5.34 inc VAT)

OEM: 82-3771, F3771

Triumph Gearbox Clamp Flanged Nut - Drive Side - Pre Unit 500/650cc Models Circa 1955-62 Drive side serrated and flanged nut - locates on the gearbox top...

Quantity:

+ −

CODE: enginestud-3695-B14

Triumph Engine Mounting Stud - Unit 350/500cc Models Circa 1958-69

£4.45 (£5.34 inc VAT)

OEM: 70-3695, E3695

Triumph Engine Mounting Stud - Unit 350/500cc Models Circa 1958-69 Locates between the engine mounting plates on 3TA, 5TA, T90 and T100 models circa...

Quantity:

+ −

CODE: stud0669

Triumph Crankcase Halves Front Stud - 750cc Twins + Later T120 and TR6 Models From 1972 Onwards

£4.45 (£5.34 inc VAT)

OEM: 21-0669, S669

Triumph Crankcase Halves Front Stud - 750cc Twins + Later T120 and TR6 Models From 1972 Onwards Crankcase front stud - secures the exhaust pipe stays. As...

Quantity:

+ −

Triumph T120, TR6 etc, 650cc Cylinder Head bolt (with torque stay extension)

CODE: bolt660-B19

Triumph 650cc Twin - Cylinder Head Bolt with Torque Stay

£3.95 (£4.74 inc VAT)

OEM: 70-1596

Triumph T120, TR6 etc, 650cc Cylinder Head bolt (with torque stay extension) OEM: 70-1596

Quantity:

+ −

CODE: bolt735H-B19

Triumph T140 Cylinder Head Stud - 21-2200

£3.95 (£4.74 inc VAT)

OEM: 21-2200

Triumph T140, Cylinder head stud (centre 5/16" stud) OEM: 21-2200

Quantity:

+ −

CODE: bolt113-B19

Triumph T90/T100 Cylinder head bolt - 70-4456

£3.95 (£4.74 inc VAT)

OEM: 70-4456

Triumph T90/T100 Cylinder head bolt (outer with extended hexagon). High Tensile 3/8" x 2-3/4" 26TPI bolts. OEM: 70-4456

Quantity:

+ −

CODE: bolt988-B19

Triumph T90/T100 Cylinder Head bolt - 70-3795

£3.95 (£4.74 inc VAT)

OEM: 70-3795

Triumph T90/T100 Cylinder Head bolt (with torque stay extension) OEM: 70-3795

Quantity:

+ −

CODE: enginestud-0839-B18

Engine Mounting Stud - Triumph - 82-0839

£3.95 (£4.74 inc VAT)

OEM: 82-0839, F839, F0839

Engine Mounting Stud - Triumph - 82-0839 Fits the early Triumph pre-unit and other models Made in England. OEM: 82-0839, F839, F0839

Quantity:

+ −

CODE: bolt3979-B14

Bolt - Screw for RM15 Alternator - 70-3979

£3.95 (£4.74 inc VAT)

OEM: E3979, 70-3979

Bolt - Screw for RM15 Alternator - 70-3979 To secure the alternator stator on early pre-unit Triumph models. OEM: E3979, 70-3979 Made in England

Quantity:

+ −

CODE: bolt574-B19

BSA A7, A10 Magneto Bolt - 67-1259

£3.95 (£4.74 inc VAT)

OEM: 67-1259

BSA A7, A10 Magneto Bolt - 67-1259 BSA A7/A10 extended magneto fixing bolt Mounts the magneto to the engine, this is the lover fixing bolt that can't be...

Quantity:

+ −

CODE: bolt3552-B13

Crankshaft Flywheel Bolt - Triumph T140, TR7 From 1973-1982

£3.95 (£4.74 inc VAT)

OEM: 71-3552, E13552

Crankshaft Flywheel Bolt - Triumph T140, TR7 From 1973-1982 Flywheel to crankshaft bolt as used on Triumph 750cc twins - 3 required. Length UH: 1+7/16"...

Quantity:

+ −

CODE: stud4088-B14

BSA Top Front Engine Mounting Stud - A50 and A65 Models Circa 1964-70

£3.95 (£4.74 inc VAT)

OEM: 68-4088

BSA Top Front Engine Mounting Stud - A50 and A65 Models Circa 1964-70 Locates at the front of the frame between the two down tubes - correct fitment on...

Quantity:

+ −

CODE: enginestud-5469-B14

Triumph Front Engine Mounting Stud - Unit 650cc Models Circa 1963-70

£3.95 (£4.74 inc VAT)

OEM: 82-5469, F5469

Triumph Front Engine Mounting Stud - Unit 650cc Models Circa 1963-70 Front engine mount stud as used on T120 and TR6 models up to 1970. Length: 3+7/16"...

Quantity:

+ −

Triumph T120, TR6 etc, 650cc Cylinder head bolt (outer bolt)

CODE: bolt716-B19

Triumph 650cc Twin - Cylinder Head Bolt

£3.45 (£4.14 inc VAT)

OEM: 70-0327

Triumph T120, TR6 etc, 650cc Cylinder head bolt (outer bolt) OEM: 70-0327

Quantity:

+ −

CODE: enginestud-3665-B14

Engine Mounting Stud - Triumph - 82-3665

£3.45 (£4.14 inc VAT)

OEM: 82-3665, F3665

Engine Mounting Stud - Triumph - 82-3665 Fits the early Triumph pre-unit and other models Made in England. OEM: 82-3665, F3665

Quantity:

+ −

15-0152, 15-152, NM16187, 06-7664 - 7/16" x 20 TPI Nut

CODE: nut0152-B14

7/16" x 20 TPI Nut - BSA M20 & M21 Cylinder Base Nut + Norton Bottom Yoke Nut

£3.45 (£4.14 inc VAT)

OEM: 15-0152, 15-152, NM16187, 06-7664

7/16" x 20 TPI Nut - BSA M20 & M21 Cylinder Base Nut + Norton Bottom Yoke Nut Height: 7/16" (10.8mm) OEM: 15-0152, 15-152, NM16187, 06-7664

Quantity:

+ −

82-1680, F1680 - Triumph Lower Frame to Engine Plate Stud - Pre Unit 500/650cc Models Circa 1956-59

CODE: stud1680-B19

Triumph Lower Frame to Engine Plate Stud - Pre Unit 500/650cc Models Circa 1946-59

£3.45 (£4.14 inc VAT)

OEM: 82-1680, F1680

Triumph Lower Frame to Engine Plate Stud - Pre Unit 500/650cc Models Circa 1946-59 Bottom frame to engine mounting stud, correct fitment on T100, 6T,...

Quantity:

+ −

CODE: stud6276-B14

BSA Lower Front Engine Mounting Stud - A Group Swinging Arm Models Circa 1954-62

£3.45 (£4.14 inc VAT)

OEM: 27-6276

BSA Lower Front Engine Mounting Stud - A Group Swinging Arm Models Circa 1954-62 Engine plate to frame lower tie stud, correct fitment on A7 and A10...

Quantity:

+ −

CODE: nut1292-B14

BSA Top Front Engine Stud Sleeve Nut - A Group Rigid, Plunger and Swinging Arm Models Circa 1947-62

£3.45 (£4.14 inc VAT)

OEM: 67-1292

BSA Top Front Engine Stud Sleeve Nut - A Group Rigid, Plunger and Swinging Arm Models Circa 1947-62 Engine plate tie extended nut, correct fitment on all...

Quantity:

+ −

CODE: nut0124-B14

1/2" x 20 CEI Thin Nut - BSA Camshaft Pinion Nut + Hub Spindle Lock Nut - Various Uses

£3.45 (£4.14 inc VAT)

OEM: 02-0124, 2-124, 27-6716

1/2" x 20 CEI Thin Nut - BSA Camshaft Pinion Nut + Hub Spindle Lock Nut - Various Uses Used to secure the camshaft gear on A7 and A10 models + some early...

Quantity:

+ −

CODE: bolt1086-B19

BSA M20/M21 Cylinder Head Bolt - Circa 1937-49 - Short Type

£3.45 (£4.14 inc VAT)

OEM: 35-1086

BSA M20/M21 Cylinder Head Bolt - Circa 1937-49 - Short Type High quality BZP plated high tensile bolt. Five required for models from 1940-49 onwards....

Quantity:

+ −

CODE: bolt762-B19

Triumph 650cc Twin - Centre Cylinder Head Bolt

£2.95 (£3.54 inc VAT)

OEM: 70-4771

Triumph T120, TR6 etc, 650cc Cylinder Head bolt (centre 5/16" bolt) OEM: 70-4771

Quantity:

+ −

CODE: nut3735-B13

Alternator Rotor Nut - Triumph - 70-3735

£2.95 (£3.54 inc VAT)

OEM: 70-3735

Alternator Rotor Nut - Triumph - 70-3735 To secure the alternator rotor on the shaft. Triumph 350cc and 500cc OEM: 70-3735

Quantity:

+ −

CODE: enginenut-3977-B13

Alternator Rotor Locknut - Triumph - 70-3977

£2.95 (£3.54 inc VAT)

OEM: E3977, 70-3977

Alternator Rotor Locknut - Triumph - 70-3977 For mounting the alternator magnet rotor on the crankshaft. Pre-unit Triumph engines, and other models....

Quantity:

+ −

CODE: enginestud-1399-B19

Gearbox Outer Cover Stud - Triumph - 57-1399

£2.95 (£3.54 inc VAT)

OEM: T1399, 57-1399

Gearbox Outer Cover Stud - Triumph - 57-1399 Fits the Triumph off-side gearbox cover. OEM: T1399, 57-1399 Made in England

Quantity:

+ −

CODE: domenut1531-B13

Triumph Primary and Gearbox Cover Dome Nut - Unit 350/500/650cc Models Circa 1963-68

£2.95 (£3.54 inc VAT)

OEM: 97-1531, H1531

Triumph Primary and Gearbox Cover Dome Nut - Unit 650cc Models Circa 1963-68 Chrome plated acorn nut used to secure both the primary chaincase cover and...

Quantity:

+ −

CODE: stud3769-B14

Triumph Gearbox Top Mounting Stud - Pre Unit 500/650cc Models Circa 1956-62

£2.95 (£3.54 inc VAT)

OEM: 82-3769, F3769

Triumph Gearbox Top Mounting Stud - Pre Unit 500/650cc Models Circa 1956-62 Threaded mounting stud, correct fitment on T100, 6T, T110, T120, TR6 models....

Quantity:

+ −

CODE: stud3114-B19

Triumph Crankshaft / Rotor Mounting Stud - Pre Unit and Unit Models Circa 1959-73

£2.95 (£3.54 inc VAT)

OEM: 70-3114, E3114

Triumph Crankshaft / Rotor Mounting Stud - Pre Unit and Unit Models Circa 1959-73 Drive side crankshaft to alternator rotor stud - later pre unit...

Quantity:

+ −

CODE: stud1539-B19

Triumph Crankcase Oil Pipe Block Stud - Pre Unit 350/500/650cc Twins From 1939-62

£2.95 (£3.54 inc VAT)

OEM: 70-1539, E1539

Triumph Crankcase Oil Pipe Block Stud - Pre Unit 350/500/650cc Twins From 1939-62 Oil junction block to crankcase stud - correct fitment on pre-unit...

Quantity:

+ −

CODE: screw1647-B13

Triumph Crankcase Inner Boss Joint Screw - Pre Unit 350/500/650cc Models - Circa 1946-62

£2.95 (£3.54 inc VAT)

OEM: 70-1647, E1647

Triumph Crankcase Inner Boss Joint Screw - Pre Unit 350/500/650cc Models - Circa 1946-62 Correct fitment on pre unit 3T, 5T, T100, TR5, 6T, T110, TR6...

Quantity:

+ −

CODE: nut2228-B13

Triumph Dynamo To Gear Case Domed Nut - Pre Unit 350/500/650cc Models - Circa 1946-59

£2.95 (£3.54 inc VAT)

OEM: 70-2228, E2228

Triumph Dynamo To Gear Case Domed Nut - Pre Unit 350/500/650cc Models - Circa 1946-59 Locates in the top right hand side of the timing case. Correct...

Quantity:

+ −

CODE: enginestud-2414-B19

Triumph Upper Frame to Engine Plate Mounting Stud - Pre Unit Models Circa 1946-59

£2.95 (£3.54 inc VAT)

OEM: 82-2414, F2414

Triumph Upper Frame to Engine Plate Mounting Stud - Pre Unit Models Circa 1946-59 Upper frame to engine mounting stud - locates in the boss on the front...

Quantity:

+ −

CODE: bolt044-B19

Triumph cylinder head stud - 70-7996

£2.90 (£3.48 inc VAT)

OEM: 70-7996

Triumph cylinder head stud OEM: 70-7996

Quantity:

+ −

CODE: nut057H-B18

Triumph T120, T140 Primary Chaincase Dome Head Nut - 21-0544

£2.75 (£3.30 inc VAT)

OEM: 21-0544, S544

Triumph T120, T140 Primary Chaincase Dome Head Nut - 21-0544 UNF Dome Head Nut 5/16" (Chrome plated) OEM: 21-0544, S544

Quantity:

+ −

CODE: nut2182-B13

Alternator Rotor Nut - Triumph T120, T140, TR7, T160 - 1971-82

£2.45 (£2.94 inc VAT)

OEM: 70-3735

Alternator Rotor Nut - Triumph T120, T140, TR7, T160 - 1971-82 To secure the alternator rotor on the shaft. Thread: 7/16" UNF - 20 TPI Longer type with...

Quantity:

+ −

CODE: key1558-B13

Triumph Camshaft Pinion Woodruff Key - Pre-Unit & Unit Twins

£2.45 (£2.94 inc VAT)

OEM: 70-1558, E1558

Triumph Camshaft Pinion Woodruff Key - Pre-Unit & Unit Twins Locates the camshaft pinion to the camshaft - both inlet and exhaust. Length: 5/16"...

Quantity:

+ −

CODE: bolt0241-B19

Triumph T140, TR7 Cylinder Head Bolt - UNF Thread

£2.45 (£2.94 inc VAT)

OEM: 14-0241

Triumph T140, TR7 Cylinder Head Bolt - UNF Thread Length UH: 3+1/2" (88.6mm) Diameter: 3/8" UNF thread OEM: 14-0241

Quantity:

+ −

CODE: stud3523-B14

Triumph Grooved Cylinder Base Stud - Pre Unit 500/650cc and Unit 650cc Models

£2.45 (£2.94 inc VAT)

OEM: 70-3523, E3523

Triumph Grooved Cylinder Base Stud - Pre Unit 500/650cc and Unit 650cc Models Correct fitment on many pre unit twins - 5T, TR5, 6T, T110, TR6, T120 circa...

Quantity:

+ −

70-0672, E672 - Triumph Plain Cylinder Base Stud - Pre Unit 500/650cc and Unit 650cc Models

CODE: stud0672-B19

Triumph Cylinder Base Stud - Pre Unit 500/650cc and Unit 650cc Models

£2.45 (£2.94 inc VAT)

OEM: 70-0672, E672

Triumph Cylinder Base Stud - Pre Unit 500/650cc and Unit 650cc Models Correct fitment on many pre unit twins - 5T, TR5, 6T, T110, TR6, T120 circa...

Quantity:

+ −

CODE: wash3770-B13

Triumph Serrated Gearbox Clamp Washer - Pre Unit 500/650cc Models Circa 1956-62

£2.45 (£2.94 inc VAT)

OEM: 82-3770, F3770

Triumph Serrated Gearbox Clamp Washer - Pre Unit 500/650cc Models Circa 1956-62 Serrated clamping washer, fits on the top gearbox mounting stud to...

Quantity:

+ −

CODE: screw1926-B13

Triumph Crankcase Mouth Screw - Unit 350/500cc Models - Circa 1969-72

£2.45 (£2.94 inc VAT)

OEM: 21-1926, S1926

Triumph Crankcase Mouth Screw - Unit 350/500cc Models - Circa 1969-72 Correct fitment on T90 and T100 models circa 1969-72. Two required per engine -...

Quantity:

+ −

CODE: stud0456-B18

Triumph Engine Plate / Crankcase Bottom Front Stud - 500/650cc Pre Unit Models From 1946-62

£2.45 (£2.94 inc VAT)

OEM: 57-0456, T456

Triumph Engine Plate / Crankcase Bottom Front Stud - 500/650cc Pre Unit Models From 1946-62 Crankcase bottom front stud - correct fitment on 5T, T100,...

Quantity:

+ −

CODE: dowel1535-B13

Triumph Crankcase to Timing Cover Dowel - Pre Unit 500/650cc Models Circa 1939-62

£2.45 (£2.94 inc VAT)

OEM: 70-1535, E1535

Triumph Crankcase to Timing Cover Dowel - Pre Unit 500/650cc Models Circa 1939-62 Hollow crankcase to timing cover dowel - used to position and secure...

Quantity:

+ −

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Bolts & Nuts

Bestsellers Bestsellers

Account Details

Quick Links

Feked.com

Feked Online