.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Clutch

clutch1256-B23
£3.45 (£4.14 inc VAT)
OEM: 57-1256, T1256
Triumph Clutch Adjuster Pin - Unit 350/500/650cc Models Pre 1965 + T20 Tiger Cub Models Clutch pushrod adjuster screw - correct fitment on 3TA, 5TA and...
+

wash4794-B18
£3.75 (£4.50 inc VAT)
OEM: 57-4794, 57-2279, T4794, T2279
Triumph Clutch Mainshaft Washer - 500/650/750cc Unit Twins from 1968 onwards OD: 1+3/8" (35mm) ID: 9/16" (14.5mm) Depth: 3/6" (5mm) OEM: 57-4794,...
+

clplt299-B24
£3.95 (£4.74 inc VAT)
OEM: 57-2725, 40-3220
BSA C15, C25, B25, B40, B44, B50 - Clutch Steel Plates Inside Diameter: 93mm Outside Diameter: 134mm Stub Length: 5.65mm Available as standard or...

clutch3762-B18
£3.95 (£4.74 inc VAT)
OEM: 57-3762
Triumph T120/T140 cable abutment (threaded for screw in adjuster) OEM: 57-3762, T3762
+

clutch1931H-B24
£3.95 (£4.74 inc VAT)
OEM: T1931, 57-1931, 68-3287, 42-3197, 57-0998
Triumph/BSA Clutch Spring Cup - 3 or 4 Spring - Pre Unit and Unit Models - 1951 Onwards To fit 3 spring AND 4 spring clutch plate hubs. Correct fitment...
+

clutch7034-B18
£3.95 (£4.74 inc VAT)
OEM: 57-4588, 57-7034, 57-4441, T4588, T7034, T4441
Triumph Clutch Operating Lever - 650/750 Unit Twins Suits Triumph T120, T140 from 1972-78 with 3 Ball Clutch Lever Arm OEM: 57-4588, 57-7034, 57-4441,...
+

clutch14-2-8m-B23
£3.95 (£4.74 inc VAT)
OEM: 14-2-8, 24-X-11
Burman Clutch Spring Bolt/Stud - Various Models B52 Clutch Correct fitment for many models fitted with a Burman clutch with 5 friction plates. OD:...
+

clutch0433-B23
£3.95 (£4.74 inc VAT)
OEM: 02-0433, 2-433
BSA Clutch Woodruff Key - Adapter to Mainshaft - 6 Spring or Triumph Type 4 Spring Clutch Correct fitment on BSA A7 and A10 models circa 1954-1962 and B...
+

washer-set277-B23
£3.95 (£4.74 inc VAT)
OEM: 70-4058, 70-3975, 57-1347, E4058, E3975, T1347
Triumph T20 Tiger Cub Tab Washer Set - Clutch Centre and Rotor Lock Washers - Circa 1960 Onwards Mainshaft / clutch hub lockwasher + two rotor...
+

clutch3257-B23
£3.95 (£4.74 inc VAT)
OEM: 67-3257
BSA Clutch Centre and Mainshaft Nut - A7 / A10 Plunger Frame Models Circa 1949-57 Clutch centre locknut with chamfered edges on both sides. Correct...
+

fkclutch127-B23
£3.99 (£4.79 inc VAT)
OEM: 04-3441, 04-0484, NM23307
CLUTCH SPRING STUD - AMC, Norton Norton, AMC Clutch spring stud for pre-Commando models using the AMC clutch. (3 studs usually required per Clutch)...
+

clutch219-B23
£4.45 (£5.34 inc VAT)
OEM: 57-2159, 68-3308, T2159
Triumph/BSA Clutch Adjusting Screw - 3/8" UNF Clutch adjuster screw/pin for Triumph T120, T140 and BSA A65 models. Use with our steel or billet alloy 3...
+

clutch0413-B23
£4.45 (£5.34 inc VAT)
OEM: 57-0413, T413
Triumph Clutch Operating Arm Adjusting Pin With Ball - Pre Unit 350/500/650cc Models Clutch lever adjusting pin with captive ball bearing - correct...
+

clutch1670-B23
£4.45 (£5.34 inc VAT)
OEM: 57-1670, T1670
Triumph T20 Clutch Spring Pin - Tiger Cub Models Circa 1962-67 Clutch spring stud as used on all T20 Tiger Cub + Super Cub and Bantam Cub models from 1962...
+

clutch117B-B23
£4.75 (£5.70 inc VAT)
OEM: 57-2526, T2526, 42-3199, T427, 57-0427
Triumph / BSA Clutch Spring Nut - Pre Unit and Unit Twins - Brass Clutch spring adjuster nut as used on both pre unit and unit models. Triumph:...
+

clutch558-B23
£4.95 (£5.94 inc VAT)
OEM: 42-3108
BSA A & B Group swinging arm clutch push rods. BSA A7, A10, B31, B33 4 Spring Clutch models 1958- Length: 11+1/2" (292mm) OD:1/4" (6.4mm) OEM: 42-3108
+

clutch037-B23
£4.95 (£5.94 inc VAT)
OEM: 57-1736
Triumph T120, T140 Clutch Push Rod Length: 11+13/16" OD: 7/32" 0.219" OEM: 57-1736
+

clplt341p-B24
£4.95 (£5.94 inc VAT)
Norton 1960 on, Late AMC - Clutch Friction Plates. Steel Plate Inside Diameter: 90mm(between stubs) Outside Diameter: 148mm Stub Length: 9.8mm
+

clplt342-B24
£4.95 (£5.94 inc VAT)
OEM: 90-0037
BSA Bantam Clutch Steel plate (Surflex) Made in Italy by Surflex OEM: 90-0037
+

clutch565-B23
£4.95 (£5.94 inc VAT)
OEM: 70-9703, E9703, E4153, 70-4153
TENSION BLADE ADJUSTER NUT- Triumph Triumph T100, T120 Primary Tensioner adjuster sleeve nut. OEM: 70-9703, E9703, E4153, 70-4153
+

clutch1970-B23
£4.95 (£5.94 inc VAT)
OEM: 57-1970, T1970
Clutch Push Rod - Triumph 5TA, T100 - 57-1970 Suit some 500cc Triumph models Length: 243mm approx C-Range OEM: 57-1970, T1970
+

clutch1644-B23
£4.95 (£5.94 inc VAT)
OEM: 57-1644, T1644
Triumph Clutch Cable Abutment - Earlier Unit Twins from 1963-67 Early BSF type with hollow body and no internal threads. Correct fitment on 6T, T120 and...
+

clutch3267-B23
£4.95 (£5.94 inc VAT)
OEM: 42-3267
BSA Clutch Mainshaft Centre Nut -  A7 and A10 Models With 4 Spring Clutch Correct fitment on A7 and A10 models from 1959-63 fitted with a 4 spring...
+

nut0586-B23
£4.95 (£5.94 inc VAT)
OEM: 21-0586, S586
Triumph Clutch Centre Lock Nut - 350/500/650/750cc Unit Twins from 1968-83 9/16" UNF Thread x 18TPI - Self Locking OEM: 21-0586, S586
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.