Engine & Transmission :: Clutch

CODE: clplt332-B24

Norton Singles and Twins (-1959) - Clutch Steel Plates - Surflex -OEM: 02-3931

£7.95 (£9.54 inc VAT)

OEM: 02-3931

Norton Singles and Twins (-1959) - Clutch Steel Plates. Surflex Plate Inside Diameter: 90mm (between stubs) Outside Diameter: 148mm Stub Length: 7.2mm...

Quantity:

+ −

CODE: clutch2773-B25

BSA Triplex 3 Spring Clutch Chainwheel - 58T - A50/A65 Models Circa 1966-72

£115.95 (£139.14 inc VAT)

OEM: 68-2773, 68-3272, 57-2773

BSA Triplex 3 Spring Clutch Chainwheel - 58T - A50/A65 Models Circa 1966-72 Correct fitment on BSA unit 500/650cc models. Triplex primary chain...

Quantity:

+ −

CODE: clutch3263-E12

BSA Clutch Cable Adapter / Stop - A50/A65 Models Circa 1962-72

£3.45 (£4.14 inc VAT)

OEM: 68-3263

BSA Clutch Cable Adapter / Stop - A50/A65 Models Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable abutment and...

Quantity:

+ −

CODE: hub3930-B23

Triumph Clutch Hub Sleeve - Unit 350/500cc Models From 1959 Onwards

£34.50 (£41.40 inc VAT)

OEM: 57-3930, T3930, 57-1751, 57-1386, T1386, T1751

Triumph Clutch Hub Sleeve - Unit 350/500cc Models From 1959 Onwards This is the clutch sleeve that fits on the gearbox shaft, and holds the clutch hub....

Quantity:

+ −

CODE: clutch3235-B23

BSA 4 Spring Clutch Hub Centre - A and B Group Models Circa 1960-63

£57.95 (£69.54 inc VAT)

OEM: 42-3235

BSA 4 Spring Clutch Hub Centre - A and B Group Models Circa 1960-63 For use with a 4 spring non cush drive clutch, standard fit on later A7 and A10...

Quantity:

+ −

CODE: clutch216H-B23

BSA Clutch Centre Adjusting Screw - 40-3230, 57-4189

£1.25 (£1.50 inc VAT)

OEM: 57-4189, 40-3230

BSA B25, B44, B50 and C15 - Clutch centre adjuster screw. BSF threads. OEM: 57-4189, 40-3230

Quantity:

+ −

043443, 04-3443 - Norton AMC Clutch Spider

CODE: clutch136

Norton AMC Clutch Spider - OEM: 04-3443

£89.95 (£107.94 inc VAT)

OEM: 04-3443

Norton AMC Clutch Spider Fits Norton, AJS, Matchless Depth of spline 19.16 mm Depth of thread 26.5 mm Outer registers - spline side, 1st 5.36 mm, 2nd...

Quantity:

+ −

CODE: hub3170A-B23

BSA 4 Spring Clutch Hub Adaptor - Large Taper - A and B Group Models Circa 1954-63

£49.95 (£59.94 inc VAT)

OEM: 42-3170A

BSA 4 Spring Clutch Hub Adaptor - Large Taper - A and B Group Models Circa 1954-63 Clutch sleeve that fits on the gearbox shaft, and holds the clutch...

Quantity:

+ −

CODE: clplt322p-B24

BSA Single & Twin Cylinder Swing Arm Models, A and B models - Non Surflex Clutch Friction Plates

£9.45 (£11.34 inc VAT)

OEM: 42-3119, 65-3857

BSA Single & Twin Cylinder Swing Arm Models, A and B models - Non Surflex Clutch Friction Plates Inside Diameter: 106mm Outside Diameter: 153mm Stub...

Quantity:

+ −

CODE: spring3247-B24

BSA Clutch Spring - A7, A10 Plunger & Rigid Frame Models - 6 Spring Clutch

£1.95 (£2.34 inc VAT)

OEM: 67-3247

BSA Clutch Spring - A7, A10 Plunger & Rigid Frame Models - 6 Spring Clutch BSA clutch spring for six spring clutches as fitted to BSA A Group plunger...

Quantity:

+ −

11-7-11 - Burman Clutch Centre Retaining Nut

CODE: clutch11-7-11-B23

Burman Clutch Centre Retaining Nut - Various Models B52 Clutch

£2.95 (£3.54 inc VAT)

OEM: 11-7-11

Burman Clutch Centre Retaining Nut - Various Models B52 Clutch Clutch centre mainshaft retaining nut. OD: 1+3/16" (30mm) ID: 5/8" 20 TPI Made in...

Quantity:

+ −

57-0413, T413 - Triumph Clutch Operating Arm Adjusting Pin With Ball - Pre Unit 350/500/650cc Models

CODE: clutch0413-B23

Triumph Clutch Push Rod Adjuster Pin With Ball - Pre Unit 350/500/650cc Models

£4.45 (£5.34 inc VAT)

OEM: 57-0413, T413

Triumph Clutch Operating Arm Adjusting Pin With Ball - Pre Unit 350/500/650cc Models Clutch lever adjusting pin with captive ball bearing - correct...

Quantity:

+ −

CODE: trun4148-B18

Triumph Primary Chain Tensioner Blade Trunnion - 350/500cc Models Circa 1960-74

£1.75 (£2.10 inc VAT)

OEM: 70-4148, E4148

Triumph Primary Chain Tensioner Blade Trunnion - 350/500cc Models Circa 1960-74 Correct fitment on 3TA, 5TA and T100 models circa 1960-65 + 1968 onwards...

Quantity:

+ −

CODE: clutch0861-B23

BSA Primary Chain Tensioner Screw Oil Seal Washer - A50 and A65 Models Circa 1965-72

£0.65 (£0.78 inc VAT)

OEM: 68-0861, 68-861

BSA Primary Chain Tensioner Screw Oil Seal Washer - A50 and A65 Models Circa 1965-72 Oil seal washer with rubber insert, locates over the adjuster screw -...

Quantity:

+ −

CODE: nut0586-B23

Triumph Clutch Centre Lock Nut - 350/500/650/750cc Unit Twins from 1968-83

£4.95 (£5.94 inc VAT)

OEM: 21-0586, S586

Triumph Clutch Centre Lock Nut - 350/500/650/750cc Unit Twins from 1968-83 9/16" UNF Thread x 18TPI - Self Locking OEM: 21-0586, S586

Quantity:

+ −

OEM: 57-7035, T7035, 57-4589, T4589, 57-1711, 57-3761, T1711, T3761

CODE: clutch7035-B18

Triumph Clutch Operating Actuator Thrust Plate - 650/750 Unit Twins

£6.95 (£8.34 inc VAT)

OEM: 57-7035, T7035, 57-4589, T4589, 57-1711, 57-3761, T1711, T3761

Triumph Clutch Operating Actuator Thrust Plate - 650/750 Unit Twins Suits Triumph T120, T140 from 1972-78 with 3 Ball Clutch Lever Arm OD: 1+13/16" (46mm)...

Quantity:

+ −

CODE: clplt340p-B-B24

BSA A50, A65 Clutch Steel Plates

£6.95 (£8.34 inc VAT)

OEM: 57-1363, 42-3195

BSA A50, A65 Clutch Steel Plates Inside Diameter: 98mm (between stubs) Outside Diameter: 150mm Stub Length: 6mm OEM: 57-1363, 42-3195

Quantity:

+ −

CODE: fkclutch127-B23

Clutch Spring Stud - Norton, AMC

£3.99 (£4.79 inc VAT)

OEM: 04-3441, 04-0484, NM23307

CLUTCH SPRING STUD - AMC, Norton Norton, AMC Clutch spring stud for pre-Commando models using the AMC clutch. (3 studs usually required per Clutch)...

Quantity:

+ −

CODE: clutch3643-B23

Triumph/BSA Clutch Shaft Needle Roller Bearing - T150, T160 and A75 Models

£9.95 (£11.94 inc VAT)

OEM: 57-3643, T3643

Triumph/BSA Clutch Shaft Needle Roller Bearing - T150, T160 and A75 Models Clutch shaft / hub needle race bearing as used on all 750cc triples from 1968...

Quantity:

+ −

CODE: clutch1466H-B23

Triumph/BSA 4 Spring Clutch Pressure Plate With Threaded Adjuster Pin and Nut

£20.95 (£25.14 inc VAT)

OEM: 57-1466, T1466, 68-3226, 57-1256, T1256, 40-3230, GS662, 02-2395

Triumph/BSA 4 Spring Clutch Pressure Plate With Threaded Adjuster Pin and Nut Supplied as a complete assembly with threaded adjuster pin and nut. Correct...

Quantity:

+ −

CODE: clutch650-B23

Clutch Rollers - BSA - 26-0650 - pack 10

£2.95 (£3.54 inc VAT)

OEM: 26-0650, 26-650

Clutch Rollers - BSA - 26-0650 - pack 10 Clutch centre rollers for BSA, duplex chain type BSA A7 and A10 early models with the 6-spring clutch and...

Quantity:

+ −

CODE: clutch7034-B18

Triumph Clutch Operating Lever - 650/750 Unit Twins

£3.95 (£4.74 inc VAT)

OEM: 57-4588, 57-7034, 57-4441, T4588, T7034, T4441

Triumph Clutch Operating Lever - 650/750 Unit Twins Suits Triumph T120, T140 from 1972-78 with 3 Ball Clutch Lever Arm OEM: 57-4588, 57-7034, 57-4441,...

Quantity:

+ −

Triumph TR25 Clutch Spring - OEM: 57-2727, 40-3231

CODE: spr198-T-B24

Triumph TR25, T20 Clutch Spring

£1.95 (£2.34 inc VAT)

OEM: 57-2727, 40-3231

Triumph Clutch Spring, for Triumph TR25, T20 Tiger Cub Price is for One Spring Length: 1+7/8" (48mm) Diameter: 1/2" (13mm) OEM: 57-2727, 40-3231, T1145,...

Quantity:

+ −

CODE: clutch3413-31-B18

Burman Clutch Spring Adjuster Nut - Various Models with B52 Clutch

£5.45 (£6.54 inc VAT)

OEM: 3413-31, 11-2-2, BUR23-X-3

Burman Clutch Spring Adjuster Nut - Various Models with B52 Clutch Correct fitment for many models fitted with a B52 Burman clutch. OD: 3/8" (9.3mm)...

Quantity:

+ −

CODE: clutch309-B23

Burman Clutch Hub - Panther Heavyweight Singles - 5 Plate With Studs

£38.95 (£46.74 inc VAT)

OEM: 3355-96, M726

Burman Clutch Hub - Panther Heavyweight Singles - 5 Plate With Studs ID: 4+1/16" (103.1mm) Basket depth: 1+1/16" (26.9mm) Centre ID: 1+3/16" (30.5mm)...

Quantity:

+ −

CODE: screw1040-B23

Clutch centre Triumph - Countersunk Screw - 57-1040

£0.95 (£1.14 inc VAT)

OEM: T1040, 57-1040

Triumph Clutch centre - Countersunk Screw - 57-1040 Screws for the clutch hub centre front plate OEM: T1040, 57-1040

Quantity:

+ −

CODE: clplt328b-B24

BSA A50, A65 Clutch Friction Plates - Surflex

£15.95 (£19.14 inc VAT)

OEM: 57-1362, 68-3267, 42-3262, 42-3192

BSA A50, A65 Clutch Friction Plates - Surflex Also some BSA A10, B31, B32, B33, B34, A7 models with 4 spring clutch Surflex Plate Inside Diameter: 106mm...

Quantity:

+ −

CODE: clplt274t-B24

Triumph TR25W Clutch Friction Plates

£6.95 (£8.34 inc VAT)

OEM: 57-2726, 40-3233

Triumph TR25W Clutch Friction Plates. Inside Diameter: 94mm Outside Diameter: 135mm Stub Length: 5.8mm OEM: 57-2726, 40-3233

Quantity:

+ −

CODE: clutch0376-B23

BSA Primary Chain Tensioner Blade Spacer - A50 and A65 Models Circa 1965-72

£2.95 (£3.54 inc VAT)

OEM: 68-0376, 68-376

BSA Primary Chain Tensioner Blade Spacer - A50 and A65 Models Circa 1965-72 Primary chain tensioner blade spacer - correct fitment on A50 and A65 models...

Quantity:

+ −

CODE: clutch1041-B23

Triumph 4 Paddle Clutch Spider - Pre Unit Models From 1953 Onwards + Unit 350/500cc Twins Circa 1958-63

£36.95 (£44.34 inc VAT)

OEM: 57-1041, T1041

Triumph 4 Paddle Clutch Spider - Pre Unit Models From 1953 Onwards + Unit 350/500cc Twins Circa 1958-63 Clutch shock absorber spider suitable for models...

Quantity:

+ −

CODE: clutch6283-B18

Triumph Primary Chain Tensioner Blade - 350/500cc Unit Twins Circa 1961-74

£12.95 (£15.54 inc VAT)

OEM: 70-6283, E6283

Triumph Primary Chain Tensioner Blade - 350/500cc Unit Twins Circa 1961-74 Primary chain tensioner blade suitable for 3TA, T90, 5TA and T100 models. For...

Quantity:

+ −

CODE: clutch3781-B24

BSA Clutch Spring Cup - All BSA Models Fitted with a 6 Spring Clutch

£4.95 (£5.94 inc VAT)

OEM: 66-3781

BSA Clutch Spring Cup - All BSA Models Fitted with a 6 Spring Clutch Correct fitment for all A, B M and C models fitted with a 6 Spring Clutch. OD:...

Quantity:

+ −

CODE: clplt1315-B24

Triumph T20 Tiger Cub Clutch Driven/Steel Plate - All Models From 1954 Onwards

£7.45 (£8.94 inc VAT)

OEM: 57-1315, T1315

Triumph T20 Tiger Cub Clutch Driven/Steel Plate - All Models From 1954 Onwards Plain steel driven plate as used on all T15 Terrier and T20 Tiger Cub...

Quantity:

+ −

CODE: clutch0453-B23

Triumph Clutch Operating Arm Adjusting Pin Lock Nut - Pre Unit 350/500/650cc Models

£1.45 (£1.74 inc VAT)

OEM: 57-0453, T453, 60-4261

Triumph Clutch Operating Arm Adjusting Pin Lock Nut - Pre Unit 350/500/650cc Models Lock nut for use with the clutch pushrod adjuster screw as fitted to...

Quantity:

+ −

CODE: trun5977-B18

Triumph Primary Chain Tensioner Blade Trunnion - 500/650cc Models Circa 1966-73 + T150 Models

£1.45 (£1.74 inc VAT)

OEM: 70-5977, E5977

Triumph Primary Chain Tensioner Blade Trunnion - 500/650cc Models Circa 1966-73 + T150 Models Correct fitment on T90 and T100 models circa 1966-67 + T120...

Quantity:

+ −

CODE: clplt264-B24

BSA Bantam Clutch friction plate (non Surflex)

£7.45 (£8.94 inc VAT)

OEM: 90-1318

BSA Bantam Clutch friction plate (non Surflex) 33mm across splines 97mm diameter OEM: 90-1318

Quantity:

+ −

CODE: clutch0422-B23

Triumph 4 Spring Clutch Pressure Plate Thrust Button - Pre Unit 350/500/650cc Models Circa 1946-62

£1.45 (£1.74 inc VAT)

OEM: 57-0422, T422

Triumph 4 Spring Clutch Pressure Plate Thrust Button - Pre Unit 350/500/650cc Models Circa 1946-62 Clutch push rod cup for all pre unit models with a 4...

Quantity:

+ −

CODE: clutch1970-B23

Clutch Push Rod - Triumph 5TA, T100 - 57-1970

£4.95 (£5.94 inc VAT)

OEM: 57-1970, T1970

Clutch Push Rod - Triumph 5TA, T100 - 57-1970 Suit some 500cc Triumph models Length: 243mm approx C-Range OEM: 57-1970, T1970

Quantity:

+ −

CODE: clutch1712-B23

Triumph 3 Ball Mechanism Clutch Cone Spring - 650/750 Unit Twins

£1.45 (£1.74 inc VAT)

OEM: 57-1712, T1712

Triumph 3 Ball Mechanism Clutch Cone Spring - 650/750 Unit Twins Thrust Return Cone Spring - Triumph T120, T140 from 1972-78 with 3 Ball Clutch Lever Arm...

Quantity:

+ −

CODE: clutch2368-B23

3/8" Ball Bearing - Single Ball - Universal Use

£0.75 (£0.90 inc VAT)

OEM: 60-2368, D2368

3/8" Ball Bearing - Single Ball - Universal Use 3/8" (10mm approx) diameter Suitable for use with Triumph Unit Twins fitted with a 3 ball Clutch...

Quantity:

+ −

CODE: clutch3222-B23

Triumph/BSA Clutch Pressure Plate - 4 Spring - TR25W, C15, B40 + Early C25/B25 Models

£16.95 (£20.34 inc VAT)

OEM: 40-3222, 57-2728, T2728

Triumph/BSA Clutch Pressure Plate - 4 Spring - TR25W, C15, B40 + Early C25/B25 Models Steel clutch pressure plate for use with a 1/4" 26 TPI BSF push rod...

Quantity:

+ −

CODE: clutch3911-B18

BSA Clutch Inner Bearing Race - 6 Spring Clutch - A Group Swinging Arm + B/C/M Group Models

£22.95 (£27.54 inc VAT)

OEM: 65-3911

BSA Clutch Inner Bearing Race - 6 Spring Clutch - A Group Swinging Arm + B/C/M Group Models Clutch inner bearing twin track race with two grooves. OD:...

Quantity:

+ −

CODE: clutch1645-B23

Triumph Clutch Cable Abutment Adaptor / Ferrule - Unit Twins Circa 1961-71 + T150 Models

£2.95 (£3.54 inc VAT)

OEM: 57-1645, T1645

Triumph Clutch Cable Abutment Adaptor / Ferrule - Unit Twins Circa 1961-71 + T150 Models Short type slotted ferrule for use with a standard clutch cable...

Quantity:

+ −

040365, 04-0365 - Norton/AMC Clutch Pressure Plate - 3 Spring

CODE: clutch128B

Norton/AMC Clutch Pressure Plate - 3 Spring - Singles and Lightweights

£35.95 (£43.14 inc VAT)

OEM: 040365, 04-0365

Norton/AMC Clutch Pressure Plate - 3 Spring - Singles & Lightweights AJS, Matchless, Norton clutch pressure plate to hold three clutch springs....

Quantity:

+ −

CODE: clutch3249-B23

BSA Clutch Spring Nut - A7, A10 Models - Plunger & Rigid + C Group with 3 Spring Clutch

£2.95 (£3.54 inc VAT)

OEM: 67-3249

BSA Clutch Spring Nut - A7, A10 Models - Plunger & Rigid + C Group with 3 Spring Clutch Correct fitment for all A Group models from 1960-62 fitted...

Quantity:

+ −

CODE: clutch345H-B23

Clutch Hub Centre - Triumph TRW 500, 5T, 3TA - 4 Plate Shock Absorber Type

£37.95 (£45.54 inc VAT)

OEM: 57-1037

Clutch Hub Centre - Triumph TRW 500, 5T, 3TA - 4 Plate Shock Absorber Type OEM: 57-1037

Quantity:

+ −

063459, 06-3459 - Norton Commando Clutch Centre Tab Lockwasher

CODE: clutch3459-B18

Norton Commando Clutch Centre Tab Lockwasher - 063459

£2.95 (£3.54 inc VAT)

OEM: 063459, 06-3459

Norton Commando Clutch Centre Tab Lockwasher - 063459 Clutch centre tab lockwasher as used on all Norton Commando models. Overall length: 1+7/8" (48mm)...

Quantity:

+ −

CODE: clutch1937-B23

Triumph Clutch Actuating Arm / Spoke Nut - 350/500/650cc Unit Models

£0.95 (£1.14 inc VAT)

OEM: 57-1937, T1937

Triumph Clutch Actuating Arm / Spoke Nut - 350/500/650cc Unit Models OD: 1/4"" (6.4mm) OEM: 57-1937, T1937

Quantity:

+ −

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Clutch

Account Details

Quick Links

Feked.com

Feked Online