.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Clutch

hub3170-B23
£39.95 (£47.94 inc VAT)
OEM: 42-3170
BSA 4 Spring Clutch Hub Adaptor - Standard Taper - A and B Group Models Circa 1954-63 Clutch sleeve that fits on the gearbox shaft, and holds the clutch...
+

clplt323-B24
£12.95 (£15.54 inc VAT)
OEM: 90-1318
BSA Bantam Clutch friction plate (Surflex) Made in Italy by Surflex 33mm across splines 97mm diameter OEM: 90-1318
+

clplt339-B24
£14.95 (£17.94 inc VAT)
Norton 350, 500, 650 singles - Clutch Friction Plates. Surflex Plate Inside Diameter: 90mm(between stubs) Outside Diameter: 148mm These are 4.7mm thick,...
+

spring152-B24
£1.99 (£2.39 inc VAT)
OEM: 66-3800
BSA Clutch Spring - 6 Spring version - 66-3800 BSA Clutch spring for Six spring clutches as fitted to BSA A, B and M Group models including :- A7, A10...
+

gear3257-B23
£15.95 (£19.14 inc VAT)
OEM: 68-3257
BSA A50/A65 Clutch Cable Connector Assembly - Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable abutment to connect...
+

clutch8310-B18
£26.95 (£32.34 inc VAT)
OEM: 70-8310, 68-0244
BSA Primary Chain Tensioner Blade - A50 and A65 Models Primary chain tensioner blade suitable for BSA unit twins. For Triplex chains - see related...
+

clplt272b-B24
£8.95 (£10.74 inc VAT)
OEM: 57-1362, 68-3267, 42-3262
BSA A50, A65 Clutch Friction Plates (4 Spring Clutch) Also some BSA A7/A10 models with 4 spring clutch Inside Diameter: 106mm Outside Diameter: 155mm Stub...
+

fkclutch134-B23
£2.95 (£3.54 inc VAT)
OEM: 04-0389
CLUTCH SPRING NUT - AMC, Norton Norton, AMC clutch spring adjuster nut for models using pre-Commando AMC clutches 3 nuts usually required per clutch...
+

wash1045-B23
£6.95 (£8.34 inc VAT)
OEM: 57-1045, T1045, 42-3190, 68-3025, 68-3169
Triumph / BSA Clutch Mainshaft Cupped Washer - 350/500/650cc Twins Circa 1953-1967 Clutch to mainshaft washer for models with a 3 or 4 spring clutch. BSA...
+

clplt334-B24
£6.45 (£7.74 inc VAT)
OEM: 04-3191
Norton Singles and Twins 350, 500, 650 (1959-) - Clutch Steel Plates Inside Diameter: 96mm Outside Diameter: 150mm Stub Length: 15mm OEM: 04-3191...

clutch1644-B23
£4.95 (£5.94 inc VAT)
OEM: 57-1644, T1644
Triumph Clutch Cable Abutment - Earlier Unit Twins from 1963-67 Early BSF type with hollow body and no internal threads. Correct fitment on 6T, T120 and...
+

clutch037-B23
£4.95 (£5.94 inc VAT)
OEM: 57-1736
Triumph T120, T140 Clutch Push Rod Length: 11+13/16" OD: 7/32" 0.219" OEM: 57-1736
+

spr033-B-B24
£1.95 (£2.34 inc VAT)
OEM: 57-1830, 68-3321, 57-1769, 68-3288
BSA Clutch Spring, for BSA A50, A65 Price is for One Spring Length: 1+3/4" (45mm) Diameter: 5/8" (16mm) OEM: 57-1830, 68-3321, 57-1769, 68-3288
+

clutch3223-B25
£109.95 (£131.94 inc VAT)
OEM: 42-3223, 66-3908
BSA/Triumph Clutch Chainwheel - 6 Spring - A10 etc - 42-3223 Includes the friction pieces inset into the base each side. Simply beautiful! Chain Type:...
+

clutch1735-B23
£5.45 (£6.54 inc VAT)
OEM: 57-1735
Clutch Thrust Washer - Triumph/BSA  - Early Type with Locating Tabs Fits Triumph 500/650cc unit Twins up to 1969. Also fits BSA 500/650 twins with 3...
+

clutch565-B23
£4.95 (£5.94 inc VAT)
OEM: 70-9703, E9703, E4153, 70-4153
TENSION BLADE ADJUSTER NUT- Triumph Triumph T100, T120 Primary Tensioner adjuster sleeve nut. OEM: 70-9703, E9703, E4153, 70-4153
+

clutch0433-B23
£3.95 (£4.74 inc VAT)
OEM: 02-0433, 2-433
BSA Clutch Woodruff Key - Adapter to Mainshaft - 6 Spring or Triumph Type 4 Spring Clutch Correct fitment on BSA A7 and A10 models circa 1954-1962 and B...
+

clutch475b-B20
£43.95 (£52.74 inc VAT)
OEM: 57-1549, 42-3266
BSA A and B Models with Swing-Arm Clutch Chainwheel (4 Spring) Number of Teeth: 43T Chain Type: Single OEM: 57-1549, 42-3266
+

clutch6061-B18
£8.95 (£10.74 inc VAT)
OEM: 70-6061, E4149, 70-4149, E6061
Triumph 650cc Duplex Chain Tensioner Blade - 70-6061 Also suitable for 350/500cc models Triumph Twins, primary chain tensioner blade. For duplex chains....
+

clutch3267-B23
£4.95 (£5.94 inc VAT)
OEM: 42-3267
BSA Clutch Mainshaft Centre Nut -  A7 and A10 Models With 4 Spring Clutch Correct fitment on A7 and A10 models from 1959-63 fitted with a 4 spring...
+

clutch139-B23
£7.95 (£9.54 inc VAT)
OEM: 04-0386, 04-0387
Norton/AMC clutch cush drive rubber set Set of 6 cush drive rubbers rubbers  - three large and three small. OEM: 04-0386, 04-0387 Made in England
+

clutch3919-B25
£114.95 (£137.94 inc VAT)
OEM: 65-3919
BSA Clutch Chainwheel - 43T, 6 Spring 2 Plate Type - C10/C11 from 1946-53 Suitable for BSA Rigid & Spring C10/C11 models from 1946-53 - 3 & 4...
+

clplt333-B24
£8.45 (£10.14 inc VAT)
OEM: 3370-36
Steel Clutch Plates - Burman, Ariel, Panther, Vincent  - Surflex Inside Diameter: 109mm(between stubs) Outside Diameter: 170mm Stub Length: 6mm Made by...
+

spr034-B24
£1.95 (£2.34 inc VAT)
OEM: 57-1560
Triumph Clutch Spring, for Triumph 350cc, 500cc (Late 3 Spring models) Price is for One Spring Length: 2" (50mm) Diameter: 5/8" (16mm) OEM: 57-1560
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.