.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Clutch

clutch3781-B24
£4.95 (£5.94 inc VAT)
OEM: 66-3781
BSA Clutch Spring Cup - All BSA Models Fitted with a 6 Spring Clutch Correct fitment for all A, B M and C models fitted with a 6 Spring Clutch. OD:...
+

clutch3249-B23
£2.95 (£3.54 inc VAT)
OEM: 67-3249
BSA Clutch Spring Nut - A7, A10 Models - Plunger & Rigid + C Group with 3 Spring Clutch Correct fitment for all A Group models from 1960-62 fitted...
+

clutch3787-B18
£16.95 (£20.34 inc VAT)
OEM: 66-3787
BSA Clutch Centre Nut - A, B and M Models Fitted with a 6 Spring Clutch Correct fitment for the following: A Group Swinging Arm models B Group - All...
+

clutch3910-B18
£12.95 (£15.54 inc VAT)
OEM: 65-3910
BSA Clutch Inner Bearing Race Balls & Cages - All Models Fitted with a 6 Spring Clutch Clutch bearing set of inner bearing race with ball bearings...
+

clutch3919-B25
£114.95 (£137.94 inc VAT)
OEM: 65-3919
BSA Clutch Chainwheel - 43T, 6 Spring 2 Plate Type - C10/C11 from 1946-53 Suitable for BSA Rigid & Spring C10/C11 models from 1946-53 - 3 & 4...
+

clutch3413-31-B18
£5.45 (£6.54 inc VAT)
OEM: 3413-31, 11-2-2, BUR23-X-3
Burman Clutch Spring Adjuster Nut - Various Models with B52 Clutch Correct fitment for many models fitted with a B52 Burman clutch. OD: 3/8" (9.3mm)...
+

clutch14-2-8m-B23
£3.95 (£4.74 inc VAT)
OEM: 14-2-8, 24-X-11
Burman Clutch Spring Bolt/Stud - Various Models B52 Clutch Correct fitment for many models fitted with a Burman clutch with 5 friction plates. OD:...
+

clutch11-7-11-B23
£2.95 (£3.54 inc VAT)
OEM: 11-7-11
Burman Clutch Centre Retaining Nut - Various Models B52 Clutch Clutch centre mainshaft retaining nut. OD: 1+3/16" (30mm) ID: 5/8" 20 TPI Made in...
+

clutch3813-B18
£6.45 (£7.74 inc VAT)
OEM: 66-3813
BSA Clutch Sleeve Cork Ring - M20 & M21 Single Spring Clutch Fits behind the clutch on the shaft - M20/M21 single spring clutch models. OD: 1+1/4"...
+

clplt268-B24
£104.95 (£125.94 inc VAT)
OEM: 57-3709, T3709, 19-7803
Triumph/BSA Triples Clutch Friction Plate - Surflex - T150, T160, X75, A75 Fits all Triumph T150 & T160 Trident,  Triumph X75 Hurricane +  BSA A75...
+

clutch650-B23
£2.95 (£3.54 inc VAT)
OEM: 26-0650, 26-650
Clutch Rollers - BSA - 26-0650 - pack 10 Clutch centre rollers for BSA, duplex chain type BSA A7 and A10 early models with the 6-spring clutch and...
+

clplt3812-B24
£6.95 (£8.34 inc VAT)
OEM: 66-3812, 18-M-2
BSA M Group Steel Clutch Driving Plate - Single Spring Clutch - 1937-58 BSA M Group models - M20, M21, M21AA, M22, M23 Empire Star. Single spring clutch...
+

clplt4307-B24
£6.95 (£8.34 inc VAT)
OEM: 15-4307, 18-M-3
BSA M Group Steel Clutch Driven Plate - Single Spring Clutch - 1937-58 BSA M Group models - M20, M21, M21AA, M22, M23 Empire Star. Single spring clutch...
+

spring3247-B24
£1.95 (£2.34 inc VAT)
OEM: 67-3247
BSA Clutch Spring - A7, A10 Plunger & Rigid Frame Models - 6 Spring Clutch BSA clutch spring for six spring clutches as fitted to BSA A Group plunger...
+

clplt344-B24
£31.95 (£38.34 inc VAT)
OEM: 063741, 06-3741
Norton Commando Sintered Bronze Clutch Plate - 750/850cc Models - Surflex To fit 750/850cc later models - high torque type Inside Diameter excluding...
+

clutch309-B23
£38.95 (£46.74 inc VAT)
OEM: 3355-96, M726
Burman Clutch Hub - Panther Heavyweight Singles - 5 Plate With Studs ID: 4+1/16" (103.1mm) Basket depth: 1+1/16" (26.9mm) Centre ID: 1+3/16" (30.5mm)...
+

clutch628-B23
£6.95 (£8.34 inc VAT)
OEM: 40-3210, 57-2721
BSA Unit Singles Clutch Centre Front Retaining Plate - B25, B40, B44, B50, C15 Clutch outer retaining plate as used on 4 plate clutches on BSA unit...
+

clutch170-B23
£1.45 (£1.74 inc VAT)
OEM: 41-3212, 57-2723, 41-3211
BSA Unit Singles Clutch Cush Rubber - B25, B40, B44, B50, C15 Clutch cush rubber as used on 4 plate clutches on BSA unit singles circa 1959-70 + Triumph...
+

clutch2715-B23
£16.95 (£20.34 inc VAT)
OEM: 57-2715, T2715, 41-3209
Triumph/BSA Clutch Spider - Unit Singles - C15, B Group + TR25W C15, B25, B40, B44, B50 and Triumph TR25W models. OEM: 57-2715, T2715, 41-3209
+

clutch3221-B23
£0.95 (£1.14 inc VAT)
OEM: 40-3221 57-2732, T2732
Triumph/BSA Clutch Tab Lockwasher - Unit Singles - C15, B Group + TR25W C15, B25, B40, B44, B50 and Triumph TR25W models. OEM:  40-3221 57-2732, T2732
+

clutch0751
£4.95 (£5.94 inc VAT)
OEM: 060751, 06-0751
Norton Commando Clutch Diaphragm Spring Circlip - 060751 Large double spring retaining circlip used on all Norton Commando models. OD: 6+1/2" (165mm) ID:...
+

clutch0770-B23
£55.95 (£67.14 inc VAT)
OEM: 060770, 06-0770
Norton Commando Clutch Diaphragm Spring Plate - 060770 Clutch diaphragm pressure plate as used on all Norton Commando models. OD: 6+5/16" (160mm) ID:...
+

clutch3459-B18
£2.95 (£3.54 inc VAT)
OEM: 063459, 06-3459
Norton Commando Clutch Centre Tab Lockwasher - 063459 Clutch centre tab lockwasher as used on all Norton Commando models. Overall length: 1+7/8" (48mm)...
+

clutch128B
£35.95 (£43.14 inc VAT)
OEM: 040365, 04-0365
Norton/AMC Clutch Pressure Plate - 3 Spring - Singles & Lightweights AJS, Matchless, Norton clutch pressure plate to hold three clutch springs....
+

wash1045-B23
£6.95 (£8.34 inc VAT)
OEM: 57-1045, T1045, 42-3190, 68-3025, 68-3169
Triumph / BSA Clutch Mainshaft Cupped Washer - 350/500/650cc Twins Circa 1953-1967 Clutch to mainshaft washer for models with a 3 or 4 spring clutch. BSA...
+

clutch3203-B24
£3.45 (£4.14 inc VAT)
OEM: 42-3203, 57-1934, 57-0425, T425
BSA/Triumph Clutch Spring Cup - Pre Unit and Early Unit Twins - Short Type Correct fitment on many Triumph 350/500/650cc twins circa 1938-62. Also correct...
+

clutch3951-B24
£2.95 (£3.54 inc VAT)
OEM: 57-3951, 57-4121
BSA/Triumph Clutch Spring Cup - 4 Spring - Unit Singles Circa 1969-73 - Long Type Clutch spring cup for BSA singles - B50 and later C25/B25 + TR5W models...
+

clutch3218-B24
£3.45 (£4.14 inc VAT)
OEM: 40-3218, 57-1927, T1927
BSA/Triumph Clutch Spring Cup - 4 Spring - Unit Singles Circa 1959-68 - Short Type Clutch spring cup for BSA singles - C15, B40 + early B25 and TR5W...
+

clutch0422-B23
£1.45 (£1.74 inc VAT)
OEM: 57-0422, T422
Triumph 4 Spring Clutch Pressure Plate Thrust Button - Pre Unit 350/500/650cc Models Circa 1946-62 Clutch push rod cup for all pre unit models with a 4...
+

clutch3222-B23
£16.95 (£20.34 inc VAT)
OEM: 40-3222, 57-2728, T2728
Triumph/BSA Clutch Pressure Plate - 4 Spring - TR25W, C15, B40 + Early C25/B25 Models Steel clutch pressure plate for use with a 1/4" 26 TPI BSF push rod...
+

clutch8310-B18
£26.95 (£32.34 inc VAT)
OEM: 70-8310, 68-0244
BSA Primary Chain Tensioner Blade - A50 and A65 Models Primary chain tensioner blade suitable for BSA unit twins. For Triplex chains - see related...
+

clutch3259-E12
£7.95 (£9.54 inc VAT)
OEM: 68-3259
BSA Clutch Cable Abutment - A50/A65 Models Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable connector assembly to...
+

clutch3263-E12
£3.45 (£4.14 inc VAT)
OEM: 68-3263
BSA Clutch Cable Adapter / Stop - A50/A65 Models Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable abutment and...
+

hub3170-B23
£39.95 (£47.94 inc VAT)
OEM: 42-3170
BSA 4 Spring Clutch Hub Adaptor - Standard Taper - A and B Group Models Circa 1954-63 Clutch sleeve that fits on the gearbox shaft, and holds the clutch...
+

hub3170A-B23
£49.95 (£59.94 inc VAT)
OEM: 42-3170A
BSA 4 Spring Clutch Hub Adaptor - Large Taper - A and B Group Models Circa 1954-63 Clutch sleeve that fits on the gearbox shaft, and holds the clutch...
+

clutch3235-B23
£57.95 (£69.54 inc VAT)
OEM: 42-3235
BSA 4 Spring Clutch Hub Centre - A and B Group Models Circa 1960-63 For use with a 4 spring non cush drive clutch, standard fit on later A7 and A10...
+

clutch0413-B23
£4.45 (£5.34 inc VAT)
OEM: 57-0413, T413
Triumph Clutch Operating Arm Adjusting Pin With Ball - Pre Unit 350/500/650cc Models Clutch lever adjusting pin with captive ball bearing - correct...
+

clutch0453-B23
£1.45 (£1.74 inc VAT)
OEM: 57-0453, T453, 60-4261
Triumph Clutch Operating Arm Adjusting Pin Lock Nut - Pre Unit 350/500/650cc Models Lock nut for use with the clutch pushrod adjuster screw as fitted to...
+

clutch1554-B23
£2.95 (£3.54 inc VAT)
OEM: 57-1554, T1554
Triumph Clutch Operating Arm Screwed Peg - Pre Unit 500/650cc Models Circa 1958-62 Screwed peg that holds the clutch operating lever to the arm as fitted...
+

clutch3911-B18
£22.95 (£27.54 inc VAT)
OEM: 65-3911
BSA Clutch Inner Bearing Race - 6 Spring Clutch - A Group Swinging Arm + B/C/M Group Models Clutch inner bearing twin track race with two grooves. OD:...
+

clutch2773-B25
£115.95 (£139.14 inc VAT)
OEM: 68-2773, 68-3272, 57-2773
BSA Triplex 3 Spring Clutch Chainwheel - 58T - A50/A65 Models Circa 1966-72 Correct fitment on BSA unit 500/650cc models. Triplex primary chain...
+

clutch0433-B23
£3.95 (£4.74 inc VAT)
OEM: 02-0433, 2-433
BSA Clutch Woodruff Key - Adapter to Mainshaft - 6 Spring or Triumph Type 4 Spring Clutch Correct fitment on BSA A7 and A10 models circa 1954-1962 and B...
+

clplt0296-B24
£19.95 (£23.94 inc VAT)
OEM: 15-0296, 15-296
BSA Steel Clutch Driven Plate - Pre War Single Spring Models Circa 1914-37 Dished single spring clutch driven plate - 6 inner stubs. Suitable for many...
+

clutch6283-B18
£12.95 (£15.54 inc VAT)
OEM: 70-6283, E6283
Triumph Primary Chain Tensioner Blade - 350/500cc Unit Twins Circa 1961-74 Primary chain tensioner blade suitable for 3TA, T90, 5TA and T100 models. For...
+

trun5087-B18
£1.95 (£2.34 inc VAT)
OEM: 70-5087, E5087
Triumph Primary Chain Tensioner Blade Trunnion - 750cc Twins From 1973 Onwards Correct fitment on T140 and TR7 models circa 1973-85. Length: 1+3/8"...
+

clutch1466H-B23
£20.95 (£25.14 inc VAT)
OEM: 57-1466, T1466, 68-3226, 57-1256, T1256, 40-3230, GS662, 02-2395
Triumph/BSA 4 Spring Clutch Pressure Plate With Threaded Adjuster Pin and Nut Supplied as a complete assembly with threaded adjuster pin and nut. Correct...
+

c/cable3475-B18
£2.95 (£3.54 inc VAT)
OEM: 70-3475, E3475
Clutch Cable / Outer Gearbox Cover Grommet - Triumph Unit 350/500cc Models Circa 1958-63 Rubber grommet locates on the top of the outer gearbox casing to...
+

clutch0420-B23
£3.45 (£4.14 inc VAT)
OEM: 57-0420, T420
Triumph Clutch Mainshaft Spacer / Washer - Pre Unit 350/500/650cc Models from 1946-52 Clutch to mainshaft plain nut washer as used on 3T, T85, 5T, TR5,...
+

clutch0376-B23
£2.95 (£3.54 inc VAT)
OEM: 68-0376, 68-376
BSA Primary Chain Tensioner Blade Spacer - A50 and A65 Models Circa 1965-72 Primary chain tensioner blade spacer - correct fitment on A50 and A65 models...
+

clutch0375-B23
£6.95 (£8.34 inc VAT)
OEM: 68-0375, 68-375
BSA Primary Chain Tensioner Blade Pivot Pin - A50 and A65 Models Circa 1965-72 Primary chain tensioner blade pivot pin - correct fitment on A50 and A65...
+

clutch0861-B23
£0.65 (£0.78 inc VAT)
OEM: 68-0861, 68-861
BSA Primary Chain Tensioner Screw Oil Seal Washer - A50 and A65 Models Circa 1965-72 Oil seal washer with rubber insert, locates over the adjuster screw -...
+

clutch3784-B18
£3.45 (£4.14 inc VAT)
OEM: 57-3784, T3784
Triumph Clutch Cable Abutment - Later Unit 500cc Models Circa 1969-74 Later UNC type with hollow body and no internal threads. Correct fitment on T100...
+

clutch1714-B23
£4.95 (£5.94 inc VAT)
OEM: 57-1714, T1714
Triumph Clutch Actuating Arm / Spoke - Short Type for 650cc Unit Models Circa 1963-67 Overall length : 1+11/16" (43mm) OD: 0.11" (2.7mm) OEM:  57-1714,...
+

clutch1041-B23
£36.95 (£44.34 inc VAT)
OEM: 57-1041, T1041
Triumph 4 Paddle Clutch Spider - Pre Unit Models From 1953 Onwards + Unit 350/500cc Twins Circa 1958-63 Clutch shock absorber spider suitable for models...
+

trun5977-B18
£1.45 (£1.74 inc VAT)
OEM: 70-5977, E5977
Triumph Primary Chain Tensioner Blade Trunnion - 500/650cc Models Circa 1966-73 + T150 Models Correct fitment on T90 and T100 models circa 1966-67 + T120...
+

clutch3872-B23
£15.95 (£19.14 inc VAT)
OEM: 65-3872
BSA Clutch Back Plate - 6 Spring A, B, C and M Group Models - Circa 1946-62 Correct fitment on all BSA models fitted with a six spring clutch - A7, A10,...
+

clutch3274
£8.95 (£10.74 inc VAT)
OEM: 42-3274
BSA 12" Clutch Push Rod - 4 Spring Clutch - A10 Super Rocket and RGS Models + Conversions Hardened steel clutch operating rod - correct fitment on A10 SR...
+

clutch0455
£8.95 (£10.74 inc VAT)
OEM: 57-0455, 57-1551, T455, T1551
Triumph 12" Clutch Push Rod - Pre Unit Models With 4 Plate Clutch - Circa 1946-58 Hardened steel clutch operating rod - correct fitment on pre unit 5T,...
+

washer-set277-B23
£3.95 (£4.74 inc VAT)
OEM: 70-4058, 70-3975, 57-1347, E4058, E3975, T1347
Triumph T20 Tiger Cub Tab Washer Set - Clutch Centre and Rotor Lock Washers - Circa 1960 Onwards Mainshaft / clutch hub lockwasher + two rotor...
+

clutch4903-B23
£354.95 (£425.94 inc VAT)
OEM: 57-4903, T4903, 57-7056, T7056
Triumph Complete Clutch Assembly - T140 and TR7 Models Circa 1973-83 Complete clutch assembly - 58 tooth triplex chain clutch sprocket/basket - 6 plate, 3...
+

clutch1318-B23
£1.45 (£1.74 inc VAT)
OEM: 57-1318, T1318
Triumph Small Clutch Rebound Rubber - T20 Tiger Cub Models From 1954 Onwards Small clutch shock absorber rebound rubber as used on all T15 Terrier and T20...
+

clplt1315-B24
£7.45 (£8.94 inc VAT)
OEM: 57-1315, T1315
Triumph T20 Tiger Cub Clutch Driven/Steel Plate - All Models From 1954 Onwards Plain steel driven plate as used on all T15 Terrier and T20 Tiger Cub...
+

clutch0377-B23
£2.95 (£3.54 inc VAT)
OEM: 68-0377, 68-377
BSA Primary Chain Tensioner Adjuster Screw Cap Nut - BSA A50 and A65 Models Circa 1964-72 Threaded cap nut - locates on the bottom of the primary...
+

spr1742-B24
£1.95 (£2.34 inc VAT)
OEM: 57-1742, T1742
Triumph Clutch Spring - Heavy Duty Type For T20 Tiger Cub Models From 1964 Onwards Correct fitment on T20, T20SS, T20SH and T20SM models from 1964...
+

clutch1669-B24
£2.95 (£3.54 inc VAT)
OEM: 57-1669, T1669
Triumph T20 Inner Clutch Spring Cup - Tiger Cub Models Circa 1962-67 Inner clutch spring cup - locates within the clutch centre - as used on all T20 Tiger...
+

clutch1670-B23
£4.45 (£5.34 inc VAT)
OEM: 57-1670, T1670
Triumph T20 Clutch Spring Pin - Tiger Cub Models Circa 1962-67 Clutch spring stud as used on all T20 Tiger Cub + Super Cub and Bantam Cub models from 1962...
+

spr0429-B24
£1.95 (£2.34 inc VAT)
OEM: 57-0429, T429
Triumph Clutch Spring - 9 Plate / 4 Spring - 350/500cc Pre Unit + 3TA and 5TA Models Correct fitment on models with a four spring clutch with 4 driving...
+

clutch1574-B23
£6.95 (£8.34 inc VAT)
OEM: 57-1574, T1574
Triumph Clutch Operating / Push Rod - T100A and T100SS Models Circa 1960-63 Hardened steel clutch operating rod as used on 500cc models fitted with 6...
+

clutch1256-B23
£3.45 (£4.14 inc VAT)
OEM: 57-1256, T1256
Triumph Clutch Adjuster Pin - Unit 350/500/650cc Models Pre 1965 + T20 Tiger Cub Models Clutch pushrod adjuster screw - correct fitment on 3TA, 5TA and...
+

clutch1925-B23
£35.95 (£43.14 inc VAT)
OEM: 57-1925, T1925
Triumph T20 Tiger Cub Billet Alloy Clutch Pressure Plate - Later Models From 1964 Onwards Clutch pressure plate CNC  manufactured in lightweight billet...
+

clplt328t-B24
£15.95 (£19.14 inc VAT)
OEM: 57-1362, 68-3267, T414, 57-0414
Triumph 350/500/650/750 Clutch Friction Plates - Surflex Surflex Plate Inside Diameter: 106mm Outside Diameter: 155mm Stub Length: 6mm OEM: 57-1362, 68-3267,...
+

clplt340-T-B24
£7.95 (£9.54 inc VAT)
OEM: 57-1363
Triumph 350/500/650/750 Clutch Steel Plates - Surflex Surflex Plate Inside Diameter: 98mm (between stubs) Outside Diameter: 150mm Stub Length: 6mm OEM:...
+

clplt272t-B24
£8.95 (£10.74 inc VAT)
OEM: 57-1362, 68-3267, T1362, T414, 57-0414, 57-4763, T4763
Triumph 350/500/650/750 Clutch Friction Plates (3 & 4 Spring Clutch) Inside Diameter: 106mm Outside Diameter: 155mm Stub Length: 6mm OEM: 57-1362,...
+

clplt272At-B24
£7.45 (£8.94 inc VAT)
OEM: 57-1362A, 68-3267, T414, 57-0414, 57-4763, T4763
Triumph 350/500/650/750 Clutch Friction Plates - Made in Aluminium (lighter in weight) (3 & 4 Spring Clutch) Inside Diameter: 106mm Outside Diameter:...
+

clutch475t-B20
£43.95 (£52.74 inc VAT)
OEM: 57-1549, 42-3266
Triumph Pre-Unit 500/650cc Clutch Chainwheel Number of Teeth: 43T Chain Type: Single OEM: 57-1549, 42-3266, 57-0985, T985, T1549
+

clutch475b-B20
£43.95 (£52.74 inc VAT)
OEM: 57-1549, 42-3266
BSA A and B Models with Swing-Arm Clutch Chainwheel (4 Spring) Number of Teeth: 43T Chain Type: Single OEM: 57-1549, 42-3266
+

clplt274t-B24
£6.95 (£8.34 inc VAT)
OEM: 57-2726, 40-3233
Triumph TR25W Clutch Friction Plates. Inside Diameter: 94mm Outside Diameter: 135mm Stub Length: 5.8mm OEM: 57-2726, 40-3233
+

clplt274b-B24
£6.95 (£8.34 inc VAT)
OEM: 57-2726, 40-3233
BSA C15, C25, B25, B40, B44, B50 Clutch Friction Plates. Inside Diameter: 94mm Outside Diameter: 135mm Stub Length: 5.8mm OEM: 57-2726, 40-3233
+

clplt340p-T-B24
£6.95 (£8.34 inc VAT)
OEM: 57-1363, 57-0415, T415
Triumph 350/500/650/750 Clutch Steel Plates Inside Diameter: 98mm (between stubs) Outside Diameter: 150mm Stub Length: 6mm OEM: 57-1363, 57-0415, T415,...
+

clplt272b-B24
£8.95 (£10.74 inc VAT)
OEM: 57-1362, 68-3267, 42-3262
BSA A50, A65 Clutch Friction Plates (4 Spring Clutch) Also some BSA A7/A10 models with 4 spring clutch Inside Diameter: 106mm Outside Diameter: 155mm Stub...
+

clplt272Ab-B24
£7.45 (£8.94 inc VAT)
OEM: 57-1362A, 68-3267, 42-3262
BSA A50, A65 Clutch Friction Plates - Made in Aluminium (lighter in weight) Also some BSA A7/A10 models with 4 spring clutch (4 Spring Clutch) Inside...
+

clplt328b-B24
£15.95 (£19.14 inc VAT)
OEM: 57-1362, 68-3267, 42-3262, 42-3192
BSA A50, A65 Clutch Friction Plates - Surflex Also some BSA A10, B31, B32, B33, B34, A7 models with 4 spring clutch Surflex Plate Inside Diameter: 106mm...
+

clplt340-B-B24
£7.95 (£9.54 inc VAT)
OEM: 57-1363, 42-3195
BSA A50, A65 Clutch Steel Plates - Surflex Surflex Plate Inside Diameter: 98mm (between stubs) Outside Diameter: 150mm Stub Length: 6mm OEM: 57-1363,...
+

clplt340p-B-B24
£6.95 (£8.34 inc VAT)
OEM: 57-1363, 42-3195
BSA A50, A65 Clutch Steel Plates Inside Diameter: 98mm (between stubs) Outside Diameter: 150mm Stub Length: 6mm OEM: 57-1363, 42-3195
+

spr198-B-B24
£1.95 (£2.34 inc VAT)
OEM: 57-2727, 40-3231
BSA Clutch Spring, for BSA Unit singles C15, B40, B25, B44, B50 Price is for One Spring Length: 1+7/8" (48mm) Diameter: 1/2" (13mm) OEM: 57-2727,...
+

spr033-T-B24
£1.95 (£2.34 inc VAT)
OEM: 57-1830, 68-3321, 57-1769, T1830, T1769
Triumph Clutch Spring, for Triumph T120 (3 spring models) with 6 plate clutch, Triumph 500cc (1963-73), 650cc (1963-74), 750cc (1973-83) Price is for One...
+

clutch-pr-310-B23
£7.95 (£9.54 inc VAT)
OEM: 40-3265, 57-2733
BSA B25, B40, B44, C15 clutch push rod OEM: 40-3265, 57-2733 Overall length: 8+7/8" (225mm) Diameter: 3/16" Made in England
+

clutch043c-B23
£1.75 (£2.10 inc VAT)
OEM: 57-1646, 68-3264
Clutch Cable Adjuster Sleeve /Rubber Boot For Triumph 650cc and 750cc models OEM: 57-1646, 68-3264, T1646
+

clutchhub-310-B23
£38.95 (£46.74 inc VAT)
OEM: G37-3
Clutch hub for the AJS, Matchless Heavyweight singles, 350cc, 500cc Burman 5 plate clutch hub Burman, AJS, Matchless Clutch Centre 5 plate for AMC...
+

bolt2157-B23
£0.95 (£1.14 inc VAT)
OEM: 21-2157, S2157
Triumph Clutch Centre Bolt - 650/750cc Unit Twins from 1971-82 Secures the clutch inner and outer plates to the clutch centre - correct fitment on later...
+

clutch1140-B23
£5.45 (£6.54 inc VAT)
OEM: 57-1140, T1140
Triumph Clutch Operating / Push Rod - T20 Tiger Cub Models From 1954 Onwards Hardened steel clutch operating rod - correct fitment on all T15 Terrier and...
+

clutch0356-B23
£2.95 (£3.54 inc VAT)
OEM: 04-0356, 040356, A2/402
Clutch Spring Stud Nut - Norton + AJS/Matchless AMC Models Clutch stud to centre stepped nut as used on Norton and AJS/Matchless models fitted with an...
+

clutch3646-B23
£7.95 (£9.54 inc VAT)
OEM: 57-3646, T3646
Triumph/BSA Clutch Needle Roller Thrust Washer - T150, T160 and A75 Models Clutch thrust race as used on all 750cc triples from 1968 onwards. Locates...
+

clutch3643-B23
£9.95 (£11.94 inc VAT)
OEM: 57-3643, T3643
Triumph/BSA Clutch Shaft Needle Roller Bearing - T150, T160 and A75 Models Clutch shaft / hub needle race bearing as used on all 750cc triples from 1968...
+

clutch3941-set-B18
£4.95 (£5.94 inc VAT)
OEM: 57-3941, T3941
Triumph/BSA Clutch Retaining Plate Tab Washer Set - T150, T160 and A75 Models Circa 1969-75 Set of 3 clutch shock absorber retaining plate tab washers as...
+

clutch3940-set-B23
£1.95 (£2.34 inc VAT)
OEM: 57-3940, T3940
Triumph/BSA Clutch Retaining Plate Tab Washer Set - T150, T160 and A75 Models Circa 1969-75 Set of 6 2BA bolts to secure the clutch spider retaining plate...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.