.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Clutch

clplt332-B24
£7.95 (£9.54 inc VAT)
OEM: 02-3931
Norton Singles and Twins (-1959) - Clutch Steel Plates. Surflex Plate Inside Diameter: 90mm (between stubs) Outside Diameter: 148mm Stub Length: 7.2mm...
+

clutch2773-B25
£115.95 (£139.14 inc VAT)
OEM: 68-2773, 68-3272, 57-2773
BSA Triplex 3 Spring Clutch Chainwheel - 58T - A50/A65 Models Circa 1966-72 Correct fitment on BSA unit 500/650cc models. Triplex primary chain...
+

clutch3263-E12
£3.45 (£4.14 inc VAT)
OEM: 68-3263
BSA Clutch Cable Adapter / Stop - A50/A65 Models Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable abutment and...
+

hub3930-B23
£34.50 (£41.40 inc VAT)
OEM: 57-3930, T3930, 57-1751, 57-1386, T1386, T1751
Triumph Clutch Hub Sleeve - Unit 350/500cc Models From 1959 Onwards This is the clutch sleeve that fits on the gearbox shaft, and holds the clutch hub....
+

clutch3235-B23
£57.95 (£69.54 inc VAT)
OEM: 42-3235
BSA 4 Spring Clutch Hub Centre - A and B Group Models Circa 1960-63 For use with a 4 spring non cush drive clutch, standard fit on later A7 and A10...
+

clutch216H-B23
£1.25 (£1.50 inc VAT)
OEM: 57-4189, 40-3230
BSA B25, B44, B50 and C15 - Clutch centre adjuster screw. BSF threads. OEM: 57-4189, 40-3230
+

clutch136
£89.95 (£107.94 inc VAT)
OEM: 04-3443
Norton AMC Clutch Spider Fits Norton, AJS, Matchless Depth of spline 19.16 mm Depth of thread 26.5 mm Outer registers - spline side, 1st 5.36 mm, 2nd...
+

hub3170A-B23
£49.95 (£59.94 inc VAT)
OEM: 42-3170A
BSA 4 Spring Clutch Hub Adaptor - Large Taper - A and B Group Models Circa 1954-63 Clutch sleeve that fits on the gearbox shaft, and holds the clutch...
+

clplt322p-B24
£9.45 (£11.34 inc VAT)
OEM: 42-3119, 65-3857
BSA Single & Twin Cylinder Swing Arm Models, A and B models - Non Surflex Clutch Friction Plates Inside Diameter: 106mm Outside Diameter: 153mm Stub...
+

spring3247-B24
£1.95 (£2.34 inc VAT)
OEM: 67-3247
BSA Clutch Spring - A7, A10 Plunger & Rigid Frame Models - 6 Spring Clutch BSA clutch spring for six spring clutches as fitted to BSA A Group plunger...
+

clutch11-7-11-B23
£2.95 (£3.54 inc VAT)
OEM: 11-7-11
Burman Clutch Centre Retaining Nut - Various Models B52 Clutch Clutch centre mainshaft retaining nut. OD: 1+3/16" (30mm) ID: 5/8" 20 TPI Made in...
+

clutch0413-B23
£4.45 (£5.34 inc VAT)
OEM: 57-0413, T413
Triumph Clutch Operating Arm Adjusting Pin With Ball - Pre Unit 350/500/650cc Models Clutch lever adjusting pin with captive ball bearing - correct...
+

trun4148-B18
£1.75 (£2.10 inc VAT)
OEM: 70-4148, E4148
Triumph Primary Chain Tensioner Blade Trunnion - 350/500cc Models Circa 1960-74 Correct fitment on 3TA, 5TA and T100 models circa 1960-65 + 1968 onwards...
+

clutch0861-B23
£0.65 (£0.78 inc VAT)
OEM: 68-0861, 68-861
BSA Primary Chain Tensioner Screw Oil Seal Washer - A50 and A65 Models Circa 1965-72 Oil seal washer with rubber insert, locates over the adjuster screw -...
+

nut0586-B23
£4.95 (£5.94 inc VAT)
OEM: 21-0586, S586
Triumph Clutch Centre Lock Nut - 350/500/650/750cc Unit Twins from 1968-83 9/16" UNF Thread x 18TPI - Self Locking OEM: 21-0586, S586
+

clutch7035-B18
£6.95 (£8.34 inc VAT)
OEM: 57-7035, T7035, 57-4589, T4589, 57-1711, 57-3761, T1711, T3761
Triumph Clutch Operating Actuator Thrust Plate - 650/750 Unit Twins Suits Triumph T120, T140 from 1972-78 with 3 Ball Clutch Lever Arm OD: 1+13/16" (46mm)...
+

clplt340p-B-B24
£6.95 (£8.34 inc VAT)
OEM: 57-1363, 42-3195
BSA A50, A65 Clutch Steel Plates Inside Diameter: 98mm (between stubs) Outside Diameter: 150mm Stub Length: 6mm OEM: 57-1363, 42-3195
+

fkclutch127-B23
£3.99 (£4.79 inc VAT)
OEM: 04-3441, 04-0484, NM23307
CLUTCH SPRING STUD - AMC, Norton Norton, AMC Clutch spring stud for pre-Commando models using the AMC clutch. (3 studs usually required per Clutch)...
+

clutch3643-B23
£9.95 (£11.94 inc VAT)
OEM: 57-3643, T3643
Triumph/BSA Clutch Shaft Needle Roller Bearing - T150, T160 and A75 Models Clutch shaft / hub needle race bearing as used on all 750cc triples from 1968...
+

clutch1466H-B23
£20.95 (£25.14 inc VAT)
OEM: 57-1466, T1466, 68-3226, 57-1256, T1256, 40-3230, GS662, 02-2395
Triumph/BSA 4 Spring Clutch Pressure Plate With Threaded Adjuster Pin and Nut Supplied as a complete assembly with threaded adjuster pin and nut. Correct...
+

clutch650-B23
£2.95 (£3.54 inc VAT)
OEM: 26-0650, 26-650
Clutch Rollers - BSA - 26-0650 - pack 10 Clutch centre rollers for BSA, duplex chain type BSA A7 and A10 early models with the 6-spring clutch and...
+

clutch7034-B18
£3.95 (£4.74 inc VAT)
OEM: 57-4588, 57-7034, 57-4441, T4588, T7034, T4441
Triumph Clutch Operating Lever - 650/750 Unit Twins Suits Triumph T120, T140 from 1972-78 with 3 Ball Clutch Lever Arm OEM: 57-4588, 57-7034, 57-4441,...
+

spr198-T-B24
£1.95 (£2.34 inc VAT)
OEM: 57-2727, 40-3231
Triumph Clutch Spring, for Triumph TR25, T20 Tiger Cub Price is for One Spring Length: 1+7/8" (48mm) Diameter: 1/2" (13mm) OEM: 57-2727, 40-3231, T1145,...
+

clutch3413-31-B18
£5.45 (£6.54 inc VAT)
OEM: 3413-31, 11-2-2, BUR23-X-3
Burman Clutch Spring Adjuster Nut - Various Models with B52 Clutch Correct fitment for many models fitted with a B52 Burman clutch. OD: 3/8" (9.3mm)...
+

clutch309-B23
£38.95 (£46.74 inc VAT)
OEM: 3355-96, M726
Burman Clutch Hub - Panther Heavyweight Singles - 5 Plate With Studs ID: 4+1/16" (103.1mm) Basket depth: 1+1/16" (26.9mm) Centre ID: 1+3/16" (30.5mm)...
+

screw1040-B23
£0.95 (£1.14 inc VAT)
OEM: T1040, 57-1040
Triumph Clutch centre - Countersunk Screw - 57-1040 Screws for the clutch hub centre front plate OEM: T1040, 57-1040
+

clplt328b-B24
£15.95 (£19.14 inc VAT)
OEM: 57-1362, 68-3267, 42-3262, 42-3192
BSA A50, A65 Clutch Friction Plates - Surflex Also some BSA A10, B31, B32, B33, B34, A7 models with 4 spring clutch Surflex Plate Inside Diameter: 106mm...
+

clplt274t-B24
£6.95 (£8.34 inc VAT)
OEM: 57-2726, 40-3233
Triumph TR25W Clutch Friction Plates. Inside Diameter: 94mm Outside Diameter: 135mm Stub Length: 5.8mm OEM: 57-2726, 40-3233
+

clutch0376-B23
£2.95 (£3.54 inc VAT)
OEM: 68-0376, 68-376
BSA Primary Chain Tensioner Blade Spacer - A50 and A65 Models Circa 1965-72 Primary chain tensioner blade spacer - correct fitment on A50 and A65 models...
+

clutch1041-B23
£36.95 (£44.34 inc VAT)
OEM: 57-1041, T1041
Triumph 4 Paddle Clutch Spider - Pre Unit Models From 1953 Onwards + Unit 350/500cc Twins Circa 1958-63 Clutch shock absorber spider suitable for models...
+

clutch6283-B18
£12.95 (£15.54 inc VAT)
OEM: 70-6283, E6283
Triumph Primary Chain Tensioner Blade - 350/500cc Unit Twins Circa 1961-74 Primary chain tensioner blade suitable for 3TA, T90, 5TA and T100 models. For...
+

clutch3781-B24
£4.95 (£5.94 inc VAT)
OEM: 66-3781
BSA Clutch Spring Cup - All BSA Models Fitted with a 6 Spring Clutch Correct fitment for all A, B M and C models fitted with a 6 Spring Clutch. OD:...
+

clplt1315-B24
£7.45 (£8.94 inc VAT)
OEM: 57-1315, T1315
Triumph T20 Tiger Cub Clutch Driven/Steel Plate - All Models From 1954 Onwards Plain steel driven plate as used on all T15 Terrier and T20 Tiger Cub...
+

clutch0453-B23
£1.45 (£1.74 inc VAT)
OEM: 57-0453, T453, 60-4261
Triumph Clutch Operating Arm Adjusting Pin Lock Nut - Pre Unit 350/500/650cc Models Lock nut for use with the clutch pushrod adjuster screw as fitted to...
+

trun5977-B18
£1.45 (£1.74 inc VAT)
OEM: 70-5977, E5977
Triumph Primary Chain Tensioner Blade Trunnion - 500/650cc Models Circa 1966-73 + T150 Models Correct fitment on T90 and T100 models circa 1966-67 + T120...
+

clutch0422-B23
£1.45 (£1.74 inc VAT)
OEM: 57-0422, T422
Triumph 4 Spring Clutch Pressure Plate Thrust Button - Pre Unit 350/500/650cc Models Circa 1946-62 Clutch push rod cup for all pre unit models with a 4...
+

clplt264-B24
£7.45 (£8.94 inc VAT)
OEM: 90-1318
BSA Bantam Clutch friction plate (non Surflex) 33mm across splines 97mm diameter OEM: 90-1318
+

clutch1970-B23
£4.95 (£5.94 inc VAT)
OEM: 57-1970, T1970
Clutch Push Rod - Triumph 5TA, T100 - 57-1970 Suit some 500cc Triumph models Length: 243mm approx C-Range OEM: 57-1970, T1970
+

clutch1712-B23
£1.45 (£1.74 inc VAT)
OEM: 57-1712, T1712
Triumph 3 Ball Mechanism Clutch Cone Spring - 650/750 Unit Twins Thrust Return Cone Spring - Triumph T120, T140 from 1972-78 with 3 Ball Clutch Lever Arm...
+

clutch2368-B23
£0.75 (£0.90 inc VAT)
OEM: 60-2368, D2368
3/8" Ball Bearing - Single Ball - Universal Use 3/8" (10mm approx) diameter Suitable for use with Triumph Unit Twins fitted with a 3 ball Clutch...
+

clutch3222-B23
£16.95 (£20.34 inc VAT)
OEM: 40-3222, 57-2728, T2728
Triumph/BSA Clutch Pressure Plate - 4 Spring - TR25W, C15, B40 + Early C25/B25 Models Steel clutch pressure plate for use with a 1/4" 26 TPI BSF push rod...
+

clutch3911-B18
£22.95 (£27.54 inc VAT)
OEM: 65-3911
BSA Clutch Inner Bearing Race - 6 Spring Clutch - A Group Swinging Arm + B/C/M Group Models Clutch inner bearing twin track race with two grooves. OD:...
+

clutch1645-B23
£2.95 (£3.54 inc VAT)
OEM: 57-1645, T1645
Triumph Clutch Cable Abutment Adaptor / Ferrule - Unit Twins Circa 1961-71 + T150 Models Short type slotted ferrule for use with a standard clutch cable...
+

clutch128B
£35.95 (£43.14 inc VAT)
OEM: 040365, 04-0365
Norton/AMC Clutch Pressure Plate - 3 Spring - Singles & Lightweights AJS, Matchless, Norton clutch pressure plate to hold three clutch springs....
+

clutch3249-B23
£2.95 (£3.54 inc VAT)
OEM: 67-3249
BSA Clutch Spring Nut - A7, A10 Models - Plunger & Rigid + C Group with 3 Spring Clutch Correct fitment for all A Group models from 1960-62 fitted...
+

clutch345H-B23
£37.95 (£45.54 inc VAT)
OEM: 57-1037
Clutch Hub Centre - Triumph TRW 500, 5T, 3TA - 4 Plate Shock Absorber Type OEM: 57-1037
+

clutch3459-B18
£2.95 (£3.54 inc VAT)
OEM: 063459, 06-3459
Norton Commando Clutch Centre Tab Lockwasher - 063459 Clutch centre tab lockwasher as used on all Norton Commando models. Overall length: 1+7/8" (48mm)...
+

clutch1937-B23
£0.95 (£1.14 inc VAT)
OEM: 57-1937, T1937
Triumph Clutch Actuating Arm / Spoke Nut  - 350/500/650cc Unit Models OD: 1/4"" (6.4mm) OEM: 57-1937, T1937
+

c/cable3475-B18
£2.95 (£3.54 inc VAT)
OEM: 70-3475, E3475
Clutch Cable / Outer Gearbox Cover Grommet - Triumph Unit 350/500cc Models Circa 1958-63 Rubber grommet locates on the top of the outer gearbox casing to...
+

clutch4435-early-B23
£119.95 (£143.94 inc VAT)
OEM: 57-1719, 68-3275
Triumph / BSA Early Type Complete Clutch Centre / Shock Absorber Assembly - 350/500/650cc Unit Twins Early type clutch centre with countersunk screws...
+

clutch628-B23
£6.95 (£8.34 inc VAT)
OEM: 40-3210, 57-2721
BSA Unit Singles Clutch Centre Front Retaining Plate - B25, B40, B44, B50, C15 Clutch outer retaining plate as used on 4 plate clutches on BSA unit...
+

clutch7033-B18
£16.95 (£20.34 inc VAT)
OEM: 57-7033, 57-3629, 57-4587, 58-0001
Triumph Clutch Operating Lever / Lifter Assembly - 650/750cc Unit Twins Circa 1968-85 Complete ready to fit clutch lever assembly, includes: clutch lever,...
+

clutch14-2-8m-B23
£3.95 (£4.74 inc VAT)
OEM: 14-2-8, 24-X-11
Burman Clutch Spring Bolt/Stud - Various Models B52 Clutch Correct fitment for many models fitted with a Burman clutch with 5 friction plates. OD:...
+

clplt344-B24
£31.95 (£38.34 inc VAT)
OEM: 063741, 06-3741
Norton Commando Sintered Bronze Clutch Plate - 750/850cc Models - Surflex To fit 750/850cc later models - high torque type Inside Diameter excluding...
+

clplt272Ab-B24
£7.45 (£8.94 inc VAT)
OEM: 57-1362A, 68-3267, 42-3262
BSA A50, A65 Clutch Friction Plates - Made in Aluminium (lighter in weight) Also some BSA A7/A10 models with 4 spring clutch (4 Spring Clutch) Inside...
+

clutch0770-B23
£55.95 (£67.14 inc VAT)
OEM: 060770, 06-0770
Norton Commando Clutch Diaphragm Spring Plate - 060770 Clutch diaphragm pressure plate as used on all Norton Commando models. OD: 6+5/16" (160mm) ID:...
+

clutch0751
£4.95 (£5.94 inc VAT)
OEM: 060751, 06-0751
Norton Commando Clutch Diaphragm Spring Circlip - 060751 Large double spring retaining circlip used on all Norton Commando models. OD: 6+1/2" (165mm) ID:...
+

clutch1539-B23
£42.95 (£51.54 inc VAT)
OEM: 57-1539, T1539
Triumph Clutch Operating Lever - Pre Unit 500/650cc Models Circa 1959-62 Horizontal type clutch operating arm - cable to gearbox. Correct fitment on later...
+

clutch2062-B23
£2.95 (£3.54 inc VAT)
OEM: 57-2062
Clutch Cable Abutment - Short Slotted Ferrule Type - Triumph Unit Twins Pre 1968 Overall Length: 9/16" (14.5mm) Diameter: 7/16" (11mm) OEM: 57-2062, T2062
+

clutch1554-B23
£2.95 (£3.54 inc VAT)
OEM: 57-1554, T1554
Triumph Clutch Operating Arm Screwed Peg - Pre Unit 500/650cc Models Circa 1958-62 Screwed peg that holds the clutch operating lever to the arm as fitted...
+

washer-set277-B23
£3.95 (£4.74 inc VAT)
OEM: 70-4058, 70-3975, 57-1347, E4058, E3975, T1347
Triumph T20 Tiger Cub Tab Washer Set - Clutch Centre and Rotor Lock Washers - Circa 1960 Onwards Mainshaft / clutch hub lockwasher + two rotor...
+

wash4794-B18
£3.75 (£4.50 inc VAT)
OEM: 57-4794, 57-2279, T4794, T2279
Triumph Clutch Mainshaft Washer - 500/650/750cc Unit Twins from 1968 onwards OD: 1+3/8" (35mm) ID: 9/16" (14.5mm) Depth: 3/6" (5mm) OEM: 57-4794,...
+

clutch061-B23
£0.99 (£1.19 inc VAT)
OEM: 06-8072
Norton Commando, Clutch Distance Circlip - 06-8072 OEM: 06-8072, 068072
+

clutch2215-B23
£7.45 (£8.94 inc VAT)
OEM: 57-2215, T2215
Triumph Outer Clutch Thrust Washer - T150 and T160 Trident Models Clutch shaft outer thrust washer as used on 750cc triples. Locates within the outer...
+

clutch0420-B23
£3.45 (£4.14 inc VAT)
OEM: 57-0420, T420
Triumph Clutch Mainshaft Spacer / Washer - Pre Unit 350/500/650cc Models from 1946-52 Clutch to mainshaft plain nut washer as used on 3T, T85, 5T, TR5,...
+

clutch2715-B23
£16.95 (£20.34 inc VAT)
OEM: 57-2715, T2715, 41-3209
Triumph/BSA Clutch Spider - Unit Singles - C15, B Group + TR25W C15, B25, B40, B44, B50 and Triumph TR25W models. OEM: 57-2715, T2715, 41-3209
+

clutch0377-B23
£2.95 (£3.54 inc VAT)
OEM: 68-0377, 68-377
BSA Primary Chain Tensioner Adjuster Screw Cap Nut - BSA A50 and A65 Models Circa 1964-72 Threaded cap nut - locates on the bottom of the primary...
+

clutch104-B23
£7.95 (£9.54 inc VAT)
OEM: 90-1717
BSA Bantam Clutch Thrust Bearing - 90-1717 Needle bearing used in the clutch OEM: 90-1717
+

clutch3787-B18
£16.95 (£20.34 inc VAT)
OEM: 66-3787
BSA Clutch Centre Nut - A, B and M Models Fitted with a 6 Spring Clutch Correct fitment for the following: A Group Swinging Arm models B Group - All...
+

clplt4307-B24
£6.95 (£8.34 inc VAT)
OEM: 15-4307, 18-M-3
BSA M Group Steel Clutch Driven Plate - Single Spring Clutch - 1937-58 BSA M Group models - M20, M21, M21AA, M22, M23 Empire Star. Single spring clutch...
+

clplt3812-B24
£6.95 (£8.34 inc VAT)
OEM: 66-3812, 18-M-2
BSA M Group Steel Clutch Driving Plate - Single Spring Clutch - 1937-58 BSA M Group models - M20, M21, M21AA, M22, M23 Empire Star. Single spring clutch...
+

spr1742-B24
£1.95 (£2.34 inc VAT)
OEM: 57-1742, T1742
Triumph Clutch Spring - Heavy Duty Type For T20 Tiger Cub Models From 1964 Onwards Correct fitment on T20, T20SS, T20SH and T20SM models from 1964...
+

clutch1945-B23
£4.95 (£5.94 inc VAT)
OEM: 57-1945, T1945, 57-1640, T1640
Triumph Clutch Actuating Arm / Spoke -350/500cc Unit Models Overall length from threaded end to bend: 3+3/16" (81mm) OEM: 57-1945, T1945, 57-1640, T1640
+

trun5087-B18
£1.95 (£2.34 inc VAT)
OEM: 70-5087, E5087
Triumph Primary Chain Tensioner Blade Trunnion - 750cc Twins From 1973 Onwards Correct fitment on T140 and TR7 models circa 1973-85. Length: 1+3/8"...
+

clutch3872-B23
£15.95 (£19.14 inc VAT)
OEM: 65-3872
BSA Clutch Back Plate - 6 Spring A, B, C and M Group Models - Circa 1946-62 Correct fitment on all BSA models fitted with a six spring clutch - A7, A10,...
+

clutch3941-set-B18
£4.95 (£5.94 inc VAT)
OEM: 57-3941, T3941
Triumph/BSA Clutch Retaining Plate Tab Washer Set - T150, T160 and A75 Models Circa 1969-75 Set of 3 clutch shock absorber retaining plate tab washers as...
+

clutch374-B23
£1.75 (£2.10 inc VAT)
OEM: 06-0754
Norton Commando Clutch Bearing Outer Circlip - 06-0754 OEM: 06-0754
+

clutch1256-B23
£3.45 (£4.14 inc VAT)
OEM: 57-1256, T1256
Triumph Clutch Adjuster Pin - Unit 350/500/650cc Models Pre 1965 + T20 Tiger Cub Models Clutch pushrod adjuster screw - correct fitment on 3TA, 5TA and...
+

clutch3784-B18
£3.45 (£4.14 inc VAT)
OEM: 57-3784, T3784
Triumph Clutch Cable Abutment - Later Unit 500cc Models Circa 1969-74 Later UNC type with hollow body and no internal threads. Correct fitment on T100...
+

clutch3951-B24
£2.95 (£3.54 inc VAT)
OEM: 57-3951, 57-4121
BSA/Triumph Clutch Spring Cup - 4 Spring - Unit Singles Circa 1969-73 - Long Type Clutch spring cup for BSA singles - B50 and later C25/B25 + TR5W models...
+

clutch2063H-B23
£2.95 (£3.54 inc VAT)
OEM: 57-2063
Clutch Cable Abutment - Long Slotted Ferrule Type - Triumph Unit Twins 1963-70 Overall Length: 7/8" (22mm) Diameter: 7/16" (11mm) OEM: 57-2063
+

clplt330P-B24
£9.45 (£11.34 inc VAT)
OEM: G-40-6, G-40-12
Burman Clutch Friction Plates - AJS / Matchless Singles and Twins Circa 1951-56 Clutch driving / friction plate with inserts - four or five required...
+

spr0429-B24
£1.95 (£2.34 inc VAT)
OEM: 57-0429, T429
Triumph Clutch Spring - 9 Plate / 4 Spring - 350/500cc Pre Unit + 3TA and 5TA Models Correct fitment on models with a four spring clutch with 4 driving...
+

clutch1925-B23
£35.95 (£43.14 inc VAT)
OEM: 57-1925, T1925
Triumph T20 Tiger Cub Billet Alloy Clutch Pressure Plate - Later Models From 1964 Onwards Clutch pressure plate CNC  manufactured in lightweight billet...
+

spr3469-B24
£1.95 (£2.34 inc VAT)
OEM: 29-3469
BSA Clutch Spring - C10L, C11G and C12 Models - 3 Spring / 4 Plate Clutch Correct fitment on C10L, C11G and C12 models from 1954 onwards - three spring...
+

clplt268-B24
£104.95 (£125.94 inc VAT)
OEM: 57-3709, T3709, 19-7803
Triumph/BSA Triples Clutch Friction Plate - Surflex - T150, T160, X75, A75 Fits all Triumph T150 & T160 Trident,  Triumph X75 Hurricane +  BSA A75...
+

clutch0375-B23
£6.95 (£8.34 inc VAT)
OEM: 68-0375, 68-375
BSA Primary Chain Tensioner Blade Pivot Pin - A50 and A65 Models Circa 1965-72 Primary chain tensioner blade pivot pin - correct fitment on A50 and A65...
+

clutch1669-B24
£2.95 (£3.54 inc VAT)
OEM: 57-1669, T1669
Triumph T20 Inner Clutch Spring Cup - Tiger Cub Models Circa 1962-67 Inner clutch spring cup - locates within the clutch centre - as used on all T20 Tiger...
+

clutch3940-set-B23
£1.95 (£2.34 inc VAT)
OEM: 57-3940, T3940
Triumph/BSA Clutch Retaining Plate Tab Washer Set - T150, T160 and A75 Models Circa 1969-75 Set of 6 2BA bolts to secure the clutch spider retaining plate...
+

bear3717
£18.95 (£22.74 inc VAT)
OEM: 57-3717, T3717, 76168
Triumph Inner Clutch Thrust Bearing - T150 and T160 Trident Models Clutch pull rod thrust bearing as used on all 750cc triples from 1968 onwards....
+

clplt-set-M20-B24
£69.95 (£83.94 inc VAT)
OEM: 15-2419, 15-4307, 66-3812
BSA Clutch Plate Set - M Group Single Spring Clutch Models Full set of 8 clutch friction rings + 4 driving steel plates + 3 driven steel plates....
+

clutch1670-B23
£4.45 (£5.34 inc VAT)
OEM: 57-1670, T1670
Triumph T20 Clutch Spring Pin - Tiger Cub Models Circa 1962-67 Clutch spring stud as used on all T20 Tiger Cub + Super Cub and Bantam Cub models from 1962...
+

clutch3203-B24
£3.45 (£4.14 inc VAT)
OEM: 42-3203, 57-1934, 57-0425, T425
BSA/Triumph Clutch Spring Cup - Pre Unit and Early Unit Twins - Short Type Correct fitment on many Triumph 350/500/650cc twins circa 1938-62. Also correct...
+

clplt0296-B24
£19.95 (£23.94 inc VAT)
OEM: 15-0296, 15-296
BSA Steel Clutch Driven Plate - Pre War Single Spring Models Circa 1914-37 Dished single spring clutch driven plate - 6 inner stubs. Suitable for many...
+

clutch1132-B23
£1.45 (£1.74 inc VAT)
OEM: 57-1132, T1132
Triumph Large Clutch Cush Drive Rubber - T20 Tiger Cub Models From 1954 Onwards Large clutch shock absorber drive rubber as used on all T15 Terrier and...
+

clutch3822-B18
£1.95 (£2.34 inc VAT)
OEM: 65-3822
BSA Clutch Centre / Mainshaft Nut Locking Washer - 6 Spring Clutch A, B, M and C Group Models Mainshaft nut locking washer as used on six spring A7,...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.