.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.
.

Useful & Interesting





SHIPPING COSTS SHIPPING COSTS

Get rates

Clutch

Bestsellers
12 Per Page
02-3930
clplt326-B24
Norton Singles and Twins (-1959) - Clutch Friction Plates - Surflex - OEM: 02-3930
£18.95 (£22.74 inc VAT)
OEM: 02-3930
Norton Singles and Twins (-1959) - Clutch Steel Plates Inside Diameter: 96mm Outside Diameter: 150mm, including stubs: 154mm These are 5mm thick OEM:...
+ −
043443, 04-3443 - Norton AMC Clutch Spider
clutch136
Norton AMC Clutch Spider - OEM: 04-3443
£89.95 (£107.94 inc VAT)
OEM: 04-3443
Norton AMC Clutch Spider Fits Norton, AJS, Matchless Depth of spline 19.16 mm Depth of thread 26.5 mm Outer registers - spline side, 1st 5.36 mm, 2nd...
+ −
66-3787 - BSA Clutch Centre Nut
clutch3787-B18
BSA Clutch Centre Nut - A, B and M Models Fitted with a 6 Spring Clutch
£16.95 (£20.34 inc VAT)
OEM: 66-3787
BSA Clutch Centre Nut - A, B and M Models Fitted with a 6 Spring Clutch Correct fitment for the following: A Group Swinging Arm models B Group - All...
+ −
42-3203, 57-1934, 57-0425 - BSA/Triumph Clutch Spring Cup - Pre Unit and Early Unit Twins - Short Type
clutch3203-B24
BSA/Triumph Clutch Spring Cup - Pre Unit and Early Unit Twins - Short Type
£3.45 (£4.14 inc VAT)
OEM: 42-3203, 57-1934, 57-0425, T425
BSA/Triumph Clutch Spring Cup - Pre Unit and Early Unit Twins - Short Type Correct fitment on many Triumph 350/500/650cc twins circa 1938-62. Also correct...
+ −
42-3235 - BSA 4 Spring Clutch Hub Centre - A and B Group Models Circa 1960-63
clutch3235-B23
BSA 4 Spring Clutch Hub Centre - A and B Group Models Circa 1960-63
£57.95 (£69.54 inc VAT)
OEM: 42-3235
BSA 4 Spring Clutch Hub Centre - A and B Group Models Circa 1960-63 For use with a 4 spring non cush drive clutch, standard fit on later A7 and A10...
+ −
57-0420, T420 - Triumph Clutch Mainshaft Spacer / Washer - Pre Unit 350/500/650cc Models from 1946-52
clutch0420-B23
Triumph Clutch Mainshaft Spacer / Washer - Pre Unit 350/500/650cc Models from 1946-52
£3.45 (£4.14 inc VAT)
OEM: 57-0420, T420
Triumph Clutch Mainshaft Spacer / Washer - Pre Unit 350/500/650cc Models from 1946-52 Clutch to mainshaft plain nut washer as used on 3T, T85, 5T, TR5,...
+ −
57-1574, T1574 - Triumph Clutch Operating / Push Rod - T100A and T100SS Models Circa 1960-63
clutch1574-B23
Triumph Clutch Operating / Push Rod - 5TA, T100A and T100SS Models Circa 1960-63
£6.95 (£8.34 inc VAT)
OEM: 57-1574, T1574
Triumph Clutch Operating / Push Rod - T100A and T100SS Models Circa 1960-63 Hardened steel clutch operating rod as used on 500cc models fitted with 6...
+ −
15-2419, 15-4307, 66-3812 - BSA Clutch Plate Set - M Group Single Spring Clutch Models
clplt-set-M20-B24
BSA Clutch Plate Set - M Group Single Spring Clutch Models
£69.95 (£83.94 inc VAT)
OEM: 15-2419, 15-4307, 66-3812
BSA Clutch Plate Set - M Group Single Spring Clutch Models Full set of 8 clutch friction rings + 4 driving steel plates + 3 driven steel plates....
+ −
3370-36 - Steel Clutch Plates - Burman, Ariel, Panther, Vincent - Surflex
clplt333-B24
Steel Clutch Plates - Burman, Ariel, Panther, Vincent - Surflex
£8.45 (£10.14 inc VAT)
OEM: 3370-36
Steel Clutch Plates - Burman, Ariel, Panther, Vincent  - Surflex Inside Diameter: 109mm(between stubs) Outside Diameter: 170mm Stub Length: 6mm Made by...
+ −
fkclutch127-B23
Clutch Spring Stud - Norton, AMC
£3.99 (£4.79 inc VAT)
OEM: 04-3441, 04-0484, NM23307
CLUTCH SPRING STUD - AMC, Norton Norton, AMC Clutch spring stud for pre-Commando models using the AMC clutch. (3 studs usually required per Clutch)...
+ −
06-8072
clutch061-B23
Norton Commando, Clutch Distance Circlip - 06-8072
£0.99 (£1.19 inc VAT)
OEM: 06-8072
Norton Commando, Clutch Distance Circlip - 06-8072 OEM: 06-8072, 068072
+ −
65-3919 - BSA Clutch Chainwheel - 43T, 6 Spring 2 Plate Type - C10/C11 from 1946-53
clutch3919-B25
BSA Clutch Chainwheel - 43T, 6 Spring 2 Plate Type - C10/C11 from 1946-53
£114.95 (£137.94 inc VAT)
OEM: 65-3919
BSA Clutch Chainwheel - 43T, 6 Spring 2 Plate Type - C10/C11 from 1946-53 Suitable for BSA Rigid & Spring C10/C11 models from 1946-53 - 3 & 4...
+ −
1 - 13  Prev
7 8 9 10 11 12 13 14 15 16 17 18
Next 

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.