.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Clutch Parts

clutch002-B23
£87.95 (£105.54 inc VAT)
OEM: 04-0366
Clutch hub centre for Norton, AMC, AJS, Matchless OEM: 040366, 04-0366
+

clutch219-B23
£4.45 (£5.34 inc VAT)
OEM: 57-2159, 68-3308, T2159
Triumph/BSA Clutch Adjusting Screw - 3/8" UNF Clutch adjuster screw/pin for Triumph T120, T140 and BSA A65 models. Use with our steel or billet alloy 3...
+

clutch3910-B18
£12.95 (£15.54 inc VAT)
OEM: 65-3910
BSA Clutch Inner Bearing Race Balls & Cages - All Models Fitted with a 6 Spring Clutch Clutch bearing set of inner bearing race with ball bearings...
+

hub3170-B23
£39.95 (£47.94 inc VAT)
OEM: 42-3170
BSA 4 Spring Clutch Hub Adaptor - Standard Taper - A and B Group Models Circa 1954-63 Clutch sleeve that fits on the gearbox shaft, and holds the clutch...
+

gear3257-B23
£15.95 (£19.14 inc VAT)
OEM: 68-3257
BSA A50/A65 Clutch Cable Connector Assembly - Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable abutment to connect...
+

clutch8310-B18
£26.95 (£32.34 inc VAT)
OEM: 70-8310, 68-0244
BSA Primary Chain Tensioner Blade - A50 and A65 Models Primary chain tensioner blade suitable for BSA unit twins. For Triplex chains - see related...
+

wash1045-B23
£6.95 (£8.34 inc VAT)
OEM: 57-1045, T1045, 42-3190, 68-3025, 68-3169
Triumph / BSA Clutch Mainshaft Cupped Washer - 350/500/650cc Twins Circa 1953-1967 Clutch to mainshaft washer for models with a 3 or 4 spring clutch. BSA...
+

fkclutch134-B23
£2.95 (£3.54 inc VAT)
OEM: 04-0389
CLUTCH SPRING NUT - AMC, Norton Norton, AMC clutch spring adjuster nut for models using pre-Commando AMC clutches 3 nuts usually required per clutch...
+

clutch1644-B23
£4.95 (£5.94 inc VAT)
OEM: 57-1644, T1644
Triumph Clutch Cable Abutment - Earlier Unit Twins from 1963-67 Early BSF type with hollow body and no internal threads. Correct fitment on 6T, T120 and...
+

clutch037-B23
£4.95 (£5.94 inc VAT)
OEM: 57-1736
Triumph T120, T140 Clutch Push Rod Length: 11+13/16" OD: 7/32" 0.219" OEM: 57-1736
+

clutch1735-B23
£5.45 (£6.54 inc VAT)
OEM: 57-1735
Clutch Thrust Washer - Triumph/BSA  - Early Type with Locating Tabs Fits Triumph 500/650cc unit Twins up to 1969. Also fits BSA 500/650 twins with 3...
+

clutch565-B23
£4.95 (£5.94 inc VAT)
OEM: 70-9703, E9703, E4153, 70-4153
TENSION BLADE ADJUSTER NUT- Triumph Triumph T100, T120 Primary Tensioner adjuster sleeve nut. OEM: 70-9703, E9703, E4153, 70-4153
+

clutch0433-B23
£3.95 (£4.74 inc VAT)
OEM: 02-0433, 2-433
BSA Clutch Woodruff Key - Adapter to Mainshaft - 6 Spring or Triumph Type 4 Spring Clutch Correct fitment on BSA A7 and A10 models circa 1954-1962 and B...
+

clutch6061-B18
£8.95 (£10.74 inc VAT)
OEM: 70-6061, E4149, 70-4149, E6061
Triumph 650cc Duplex Chain Tensioner Blade - 70-6061 Also suitable for 350/500cc models Triumph Twins, primary chain tensioner blade. For duplex chains....
+

clutch3267-B23
£4.95 (£5.94 inc VAT)
OEM: 42-3267
BSA Clutch Mainshaft Centre Nut -  A7 and A10 Models With 4 Spring Clutch Correct fitment on A7 and A10 models from 1959-63 fitted with a 4 spring...
+

clutch139-B23
£7.95 (£9.54 inc VAT)
OEM: 04-0386, 04-0387
Norton/AMC clutch cush drive rubber set Set of 6 cush drive rubbers rubbers  - three large and three small. OEM: 04-0386, 04-0387 Made in England
+

clutch170-B23
£1.45 (£1.74 inc VAT)
OEM: 41-3212, 57-2723, 41-3211
BSA Unit Singles Clutch Cush Rubber - B25, B40, B44, B50, C15 Clutch cush rubber as used on 4 plate clutches on BSA unit singles circa 1959-70 + Triumph...
+

clutch3274
£8.95 (£10.74 inc VAT)
OEM: 42-3274
BSA 12" Clutch Push Rod - 4 Spring Clutch - A10 Super Rocket and RGS Models + Conversions Hardened steel clutch operating rod - correct fitment on A10 SR...
+

clutch3813-B18
£6.45 (£7.74 inc VAT)
OEM: 66-3813
BSA Clutch Sleeve Cork Ring - M20 & M21 Single Spring Clutch Fits behind the clutch on the shaft - M20/M21 single spring clutch models. OD: 1+1/4"...
+

clutch553-B23
£1.95 (£2.34 inc VAT)
OEM: 57-2719, E9777
ROLLERS - Triumph/BSA/Villiers - 57-2719, 42-3206 Clutch Rollers for BSA and Triumph Unit singles. Also fits Villiers 9E,10E and 250cc A series...
+

clutch357-B23
£35.95 (£43.14 inc VAT)
OEM: 57-2156, T2156, 57-4590, T4590, 68-3305
Triumph/BSA Billet Alloy Clutch Pressure Plate - 3 Spring - 3/8" Threaded Adjuster Correct fitment on 500/650/750cc twins from 1966 onwards including...
+

clutch193-B23
£1.45 (£1.74 inc VAT)
OEM: 57-1473, T1473, 57-1043, T1043
Small Clutch cush rubber (4 spring models). Fits 5T, 6T, Tiger 110, T100 and T120 Bonneville. Price is for ONE (1) rubber, you will need 4 for the clutch...
+

clutch3259-E12
£7.95 (£9.54 inc VAT)
OEM: 68-3259
BSA Clutch Cable Abutment - A50/A65 Models Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable connector assembly to...
+

clutch355-B23
£32.95 (£39.54 inc VAT)
OEM: 42-3173, 42-3173A, 57-0986, T986
Triumph/BSA 4 Spring Billet Alloy Clutch Pressure Plate With Thrust Button Suitable for many pre unit Triumph models - 3T, 5T, T100, TR5, 6T, T110, TR6...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.