Engine & Transmission :: Clutch

CODE: clutch4903-B23

Triumph Complete Clutch Assembly - T140 and TR7 Models Circa 1973-83

£354.95 (£425.94 inc VAT)

OEM: 57-4903, T4903, 57-7056, T7056

Triumph Complete Clutch Assembly - T140 and TR7 Models Circa 1973-83 Complete clutch assembly - 58 tooth triplex chain clutch sprocket/basket - 6 plate, 3...

Quantity:

+ −

CODE: clutch1933

Triumph Compete 5 Plate Clutch Assembly - 3TA Models Circa 1964-66

£354.95 (£425.94 inc VAT)

OEM: 57-1933, T1933

Triumph Compete 5 Plate Clutch Assembly - 3TA Models Circa 1964-66 Correct fitment on later 3TA models from 1964-66. Supplied as a complete assembly...

Quantity:

+ −

CODE: clutch1928

Triumph Compete Clutch Assembly - 650cc Unit Models Circa 1963-72

£354.95 (£425.94 inc VAT)

OEM: 57-1928, T1928

Triumph Compete Clutch Assembly - 650cc Unit Models Circa 1963-72 Complete three spring / six plate 58 tooth duplex chain clutch assembly. Suitable for...

Quantity:

+ −

CODE: clutch1935

Triumph Compete 3 Spring Clutch Assembly - Unit 350/500cc Models Circa 1964-74

£354.95 (£425.94 inc VAT)

OEM: 57-1935, T1935

Triumph Compete 3 Spring Clutch Assembly - Unit 350/500cc Models Circa 1964-74 Complete three spring / six plate 58 tooth duplex chain clutch assembly....

Quantity:

+ −

CODE: clutch4435-B23

Triumph / BSA Complete Clutch Centre / Shock Absorber Assembly - Unit Twins - Three Spring Clutch

£119.95 (£143.94 inc VAT)

OEM: 57-4435, T4435

Triumph / BSA Complete Clutch Centre / Shock Absorber Assembly - Unit Twins - Three Spring Clutch Correct fitment on later T120, all T140 and TR7 models....

Quantity:

+ −

CODE: clutch4435-early-B23

Triumph / BSA Early Type Complete Clutch Centre / Shock Absorber Assembly - 350/500/650cc Unit Twins

£119.95 (£143.94 inc VAT)

OEM: 57-1719, 68-3275

Triumph / BSA Early Type Complete Clutch Centre / Shock Absorber Assembly - 350/500/650cc Unit Twins Early type clutch centre with countersunk screws...

Quantity:

+ −

CODE: clutch9906-B23

Triumph Clutch Hub Complete - 4 Spring

£114.95 (£137.94 inc VAT)

Clutch hub complete Shock Assembly Triumph clutch hub centre complete, for unit and pre-unit Triumph This is the complete centre unit, including the...

Quantity:

+ −

043443, 04-3443 - Norton AMC Clutch Spider

CODE: clutch136

Norton AMC Clutch Spider - OEM: 04-3443

£89.95 (£107.94 inc VAT)

OEM: 04-3443

Norton AMC Clutch Spider Fits Norton, AJS, Matchless Depth of spline 19.16 mm Depth of thread 26.5 mm Outer registers - spline side, 1st 5.36 mm, 2nd...

Quantity:

+ −

Clutch hub centre for Norton, AMC, AJS, Matchless 040366, 04-0366

CODE: clutch002-B23

Clutch Hub Centre - Norton, AMC, AJS, Matchless

£87.95 (£105.54 inc VAT)

OEM: 04-0366

Clutch hub centre for Norton, AMC, AJS, Matchless OEM: 040366, 04-0366

Quantity:

+ −

CODE: clutch3235-B23

BSA 4 Spring Clutch Hub Centre - A and B Group Models Circa 1960-63

£57.95 (£69.54 inc VAT)

OEM: 42-3235

BSA 4 Spring Clutch Hub Centre - A and B Group Models Circa 1960-63 For use with a 4 spring non cush drive clutch, standard fit on later A7 and A10...

Quantity:

+ −

060770, 06-0770 - Norton Commando Clutch Diaphragm Spring Plate

CODE: clutch0770-B23

Norton Commando Clutch Diaphragm Spring Plate - 060770

£55.95 (£67.14 inc VAT)

OEM: 060770, 06-0770

Norton Commando Clutch Diaphragm Spring Plate - 060770 Clutch diaphragm pressure plate as used on all Norton Commando models. OD: 6+5/16" (160mm) ID:...

Quantity:

+ −

CODE: hub3170A-B23

BSA 4 Spring Clutch Hub Adaptor - Large Taper - A and B Group Models Circa 1954-63

£49.95 (£59.94 inc VAT)

OEM: 42-3170A

BSA 4 Spring Clutch Hub Adaptor - Large Taper - A and B Group Models Circa 1954-63 Clutch sleeve that fits on the gearbox shaft, and holds the clutch...

Quantity:

+ −

57-1539, T1539 - Triumph Clutch Operating Lever - Pre Unit 500/650cc Models Circa 1959-62

CODE: clutch1539-B23

Triumph Clutch Operating Lever - Pre Unit 650cc Models Circa 1959-62

£42.95 (£51.54 inc VAT)

OEM: 57-1539, T1539

Triumph Clutch Operating Lever - Pre Unit 500/650cc Models Circa 1959-62 Horizontal type clutch operating arm - cable to gearbox. Correct fitment on later...

Quantity:

+ −

CODE: hub3170-B23

BSA 4 Spring Clutch Hub Adaptor - Standard Taper - A and B Group Models Circa 1954-63

£39.95 (£47.94 inc VAT)

OEM: 42-3170

BSA 4 Spring Clutch Hub Adaptor - Standard Taper - A and B Group Models Circa 1954-63 Clutch sleeve that fits on the gearbox shaft, and holds the clutch...

Quantity:

+ −

CODE: clutch309-B23

Burman Clutch Hub - Panther Heavyweight Singles - 5 Plate With Studs

£38.95 (£46.74 inc VAT)

OEM: 3355-96, M726

Burman Clutch Hub - Panther Heavyweight Singles - 5 Plate With Studs ID: 4+1/16" (103.1mm) Basket depth: 1+1/16" (26.9mm) Centre ID: 1+3/16" (30.5mm)...

Quantity:

+ −

CODE: clutchhub-310-B23

Burman, AJS, Matchless Clutch Hub - G37-3

£38.95 (£46.74 inc VAT)

OEM: G37-3

Clutch hub for the AJS, Matchless Heavyweight singles, 350cc, 500cc Burman 5 plate clutch hub Burman, AJS, Matchless Clutch Centre 5 plate for AMC...

Quantity:

+ −

CODE: clutch3355-36-B23

Burman Clutch Centre - Ariel 350cc Singles Circa 1936-47 - 2 Friction Plates

£38.95 (£46.74 inc VAT)

OEM: 3355-36

Burman Clutch Centre - Ariel 350cc Singles Circa 1936-47 - 2 Friction Plates Clutch hub / centre with no boss suitable for early civilian NG and NH...

Quantity:

+ −

CODE: clutch345H-B23

Clutch Hub Centre - Triumph TRW 500, 5T, 3TA - 4 Plate Shock Absorber Type

£37.95 (£45.54 inc VAT)

OEM: 57-1037

Clutch Hub Centre - Triumph TRW 500, 5T, 3TA - 4 Plate Shock Absorber Type OEM: 57-1037

Quantity:

+ −

CODE: hub3929-B23

Triumph/BSA Clutch Hub Sleeve - 650/750cc Unit Twins From 1963 Onwards

£37.95 (£45.54 inc VAT)

OEM: 57-3929, 68-3277, 57-1734, T1734, T418, 57-0418

Triumph/BSA Clutch Hub Sleeve - 650/750cc Unit Twins From 1963 Onwards This is the clutch sleeve that fits on the gearbox shaft, and holds the clutch...

Quantity:

+ −

CODE: clutch1041-B23

Triumph 4 Paddle Clutch Spider - Pre Unit Models From 1953 Onwards + Unit 350/500cc Twins Circa 1958-63

£36.95 (£44.34 inc VAT)

OEM: 57-1041, T1041

Triumph 4 Paddle Clutch Spider - Pre Unit Models From 1953 Onwards + Unit 350/500cc Twins Circa 1958-63 Clutch shock absorber spider suitable for models...

Quantity:

+ −

CODE: clutch357-B23

Triumph/BSA Billet Alloy Clutch Pressure Plate - 3 Spring - 3/8" Threaded Adjuster

£35.95 (£43.14 inc VAT)

OEM: 57-2156, T2156, 57-4590, T4590, 68-3305

Triumph/BSA Billet Alloy Clutch Pressure Plate - 3 Spring - 3/8" Threaded Adjuster Correct fitment on 500/650/750cc twins from 1966 onwards including...

Quantity:

+ −

040365, 04-0365 - Norton/AMC Clutch Pressure Plate - 3 Spring

CODE: clutch128B

Norton/AMC Clutch Pressure Plate - 3 Spring - Singles and Lightweights

£35.95 (£43.14 inc VAT)

OEM: 040365, 04-0365

Norton/AMC Clutch Pressure Plate - 3 Spring - Singles & Lightweights AJS, Matchless, Norton clutch pressure plate to hold three clutch springs....

Quantity:

+ −

CODE: clutch1925-B23

Triumph T20 Tiger Cub Billet Alloy Clutch Pressure Plate - Later Models From 1964 Onwards

£35.95 (£43.14 inc VAT)

OEM: 57-1925, T1925

Triumph T20 Tiger Cub Billet Alloy Clutch Pressure Plate - Later Models From 1964 Onwards Clutch pressure plate CNC manufactured in lightweight billet...

Quantity:

+ −

CODE: hub3930-B23

Triumph Clutch Hub Sleeve - Unit 350/500cc Models From 1959 Onwards

£34.50 (£41.40 inc VAT)

OEM: 57-3930, T3930, 57-1751, 57-1386, T1386, T1751

Triumph Clutch Hub Sleeve - Unit 350/500cc Models From 1959 Onwards This is the clutch sleeve that fits on the gearbox shaft, and holds the clutch hub....

Quantity:

+ −

CODE: clutch356-B23

Triumph/BSA 4 Spring Billet Alloy Clutch Pressure Plate - Threaded Adjuster Type

£32.95 (£39.54 inc VAT)

OEM: 57-1466, 57-1466A, T1466

Triumph/BSA 4 Spring Billet Alloy Clutch Pressure Plate - Threaded Adjuster Type Suitable for many pre unit Triumph models - 3T, 5T, T100, TR5, 6T, T110,...

Quantity:

+ −

CODE: clutch355-B23

Triumph/BSA 4 Spring Billet Alloy Clutch Pressure Plate With Thrust Button

£32.95 (£39.54 inc VAT)

OEM: 42-3173, 42-3173A, 57-0986, T986

Triumph/BSA 4 Spring Billet Alloy Clutch Pressure Plate With Thrust Button Suitable for many pre unit Triumph models - 3T, 5T, T100, TR5, 6T, T110, TR6...

Quantity:

+ −

CODE: clutch8310-B18

BSA Primary Chain Tensioner Blade - A50 and A65 Models

£26.95 (£32.34 inc VAT)

OEM: 70-8310, 68-0244

BSA Primary Chain Tensioner Blade - A50 and A65 Models Primary chain tensioner blade suitable for BSA unit twins. For Triplex chains - see related...

Quantity:

+ −

CODE: clutch0986H-B23

Triumph/BSA 4 Spring Steel Clutch Pressure Plate - Thrust Button Type

£25.95 (£31.14 inc VAT)

OEM: 57-0986, 42-3173, T986

Triumph/BSA 4 Spring Steel Clutch Pressure Plate - Thrust Button Type As used on many pre unit Triumph models - 3T, 5T, T100, TR5, 6T, T110, TR6 and...

Quantity:

+ −

CODE: clutch3911-B18

BSA Clutch Inner Bearing Race - 6 Spring Clutch - A Group Swinging Arm + B/C/M Group Models

£22.95 (£27.54 inc VAT)

OEM: 65-3911

BSA Clutch Inner Bearing Race - 6 Spring Clutch - A Group Swinging Arm + B/C/M Group Models Clutch inner bearing twin track race with two grooves. OD:...

Quantity:

+ −

CODE: clutch1466H-B23

Triumph/BSA 4 Spring Clutch Pressure Plate With Threaded Adjuster Pin and Nut

£20.95 (£25.14 inc VAT)

OEM: 57-1466, T1466, 68-3226, 57-1256, T1256, 40-3230, GS662, 02-2395

Triumph/BSA 4 Spring Clutch Pressure Plate With Threaded Adjuster Pin and Nut Supplied as a complete assembly with threaded adjuster pin and nut. Correct...

Quantity:

+ −

CODE: bear3717

Triumph Inner Clutch Thrust Bearing - T150 and T160 Trident Models

£18.95 (£22.74 inc VAT)

OEM: 57-3717, T3717, 76168

Triumph Inner Clutch Thrust Bearing - T150 and T160 Trident Models Clutch pull rod thrust bearing as used on all 750cc triples from 1968 onwards....

Quantity:

+ −

CODE: clutch3787-B18

BSA Clutch Centre Nut - A, B and M Models Fitted with a 6 Spring Clutch

£16.95 (£20.34 inc VAT)

OEM: 66-3787

BSA Clutch Centre Nut - A, B and M Models Fitted with a 6 Spring Clutch Correct fitment for the following: A Group Swinging Arm models B Group - All...

Quantity:

+ −

CODE: clutch2715-B23

Triumph/BSA Clutch Spider - Unit Singles - C15, B Group + TR25W

£16.95 (£20.34 inc VAT)

OEM: 57-2715, T2715, 41-3209

Triumph/BSA Clutch Spider - Unit Singles - C15, B Group + TR25W C15, B25, B40, B44, B50 and Triumph TR25W models. OEM: 57-2715, T2715, 41-3209

Quantity:

+ −

CODE: clutch3222-B23

Triumph/BSA Clutch Pressure Plate - 4 Spring - TR25W, C15, B40 + Early C25/B25 Models

£16.95 (£20.34 inc VAT)

OEM: 40-3222, 57-2728, T2728

Triumph/BSA Clutch Pressure Plate - 4 Spring - TR25W, C15, B40 + Early C25/B25 Models Steel clutch pressure plate for use with a 1/4" 26 TPI BSF push rod...

Quantity:

+ −

CODE: clutch7033-B18

Triumph Clutch Operating Lever / Lifter Assembly - 650/750cc Unit Twins Circa 1968-85

£16.95 (£20.34 inc VAT)

OEM: 57-7033, 57-3629, 57-4587, 58-0001

Triumph Clutch Operating Lever / Lifter Assembly - 650/750cc Unit Twins Circa 1968-85 Complete ready to fit clutch lever assembly, includes: clutch lever,...

Quantity:

+ −

CODE: gear3257-B23

BSA A50/A65 Clutch Cable Connector Assembly - Circa 1962-72

£15.95 (£19.14 inc VAT)

OEM: 68-3257

BSA A50/A65 Clutch Cable Connector Assembly - Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable abutment to connect...

Quantity:

+ −

CODE: clutch3872-B23

BSA Clutch Back Plate - 6 Spring A, B, C and M Group Models - Circa 1946-62

£15.95 (£19.14 inc VAT)

OEM: 65-3872

BSA Clutch Back Plate - 6 Spring A, B, C and M Group Models - Circa 1946-62 Correct fitment on all BSA models fitted with a six spring clutch - A7, A10,...

Quantity:

+ −

57-4590, 57-2156, 68-3305 - Triumph Clutch Pressure Plate - 3 Spring

CODE: clutch4590-B23

Triumph/BSA Steel Clutch Pressure Plate - 3 Spring - 3/8" Threaded Adjuster

£14.95 (£17.94 inc VAT)

OEM: 57-4590, T4590, 57-2156, T2156, 68-3305

Triumph/BSA Steel Clutch Pressure Plate - 3 Spring - 3/8" Threaded Adjuster Correct fitment on 500/650/750cc twins from 1966 onwards including T100, T120,...

Quantity:

+ −

CODE: clutch3910-B18

BSA Clutch Inner Bearing Race Balls & Cages - All Models Fitted with a 6 Spring Clutch

£12.95 (£15.54 inc VAT)

OEM: 65-3910

BSA Clutch Inner Bearing Race Balls & Cages - All Models Fitted with a 6 Spring Clutch Clutch bearing set of inner bearing race with ball bearings...

Quantity:

+ −

CODE: clutch6283-B18

Triumph Primary Chain Tensioner Blade - 350/500cc Unit Twins Circa 1961-74

£12.95 (£15.54 inc VAT)

OEM: 70-6283, E6283

Triumph Primary Chain Tensioner Blade - 350/500cc Unit Twins Circa 1961-74 Primary chain tensioner blade suitable for 3TA, T90, 5TA and T100 models. For...

Quantity:

+ −

CODE: clutch4312-B18

BSA Clutch Spring Retaining Nut - M20, M21 and M33 Single Spring Clutch Models

£10.95 (£13.14 inc VAT)

OEM: 15-4312

BSA Clutch Spring Retaining Nut - M20, M21 and M33 Single Spring Clutch Models Locates over the mainshaft nut to secure the central clutch spring. Correct...

Quantity:

+ −

CODE: clutch3643-B23

Triumph/BSA Clutch Shaft Needle Roller Bearing - T150, T160 and A75 Models

£9.95 (£11.94 inc VAT)

OEM: 57-3643, T3643

Triumph/BSA Clutch Shaft Needle Roller Bearing - T150, T160 and A75 Models Clutch shaft / hub needle race bearing as used on all 750cc triples from 1968...

Quantity:

+ −

CODE: fkclutch218-B23

Tension Blade - Triumph - OEM: 70-5085

£8.95 (£10.74 inc VAT)

OEM: 70-5085

TENSION BLADE - Triumph Triumph T140 primary chain tensioner blade. For Triplex Chain Chain Slipper, tensioner. OEM: 70-5085

Quantity:

+ −

CODE: clutch6061-B18

Triumph 500/650cc Duplex Chain Tensioner Blade - 70-6061

£8.95 (£10.74 inc VAT)

OEM: 70-6061, E4149, 70-4149, E6061

Triumph 650cc Duplex Chain Tensioner Blade - 70-6061 Also suitable for 350/500cc models Triumph Twins, primary chain tensioner blade. For duplex chains....

Quantity:

+ −

CODE: clutch1552S-B23

Triumph Clutch Operating / Push Rod - Pre Unit Models With 5 Plate Clutch Circa 1950-62

£8.95 (£10.74 inc VAT)

OEM: 57-1552, 57-0455B, T1552, T455B

Triumph Clutch Operating / Push Rod - Pre Unit Models With 5 Plate Clutch Circa 1950-62 Hardened steel clutch operating rod - correct fitment on pre unit...

Options

CODE: clutch3274

BSA 12" Clutch Push Rod - 4 Spring Clutch - A10 Super Rocket and RGS Models + Conversions

£8.95 (£10.74 inc VAT)

OEM: 42-3274

BSA 12" Clutch Push Rod - 4 Spring Clutch - A10 Super Rocket and RGS Models + Conversions Hardened steel clutch operating rod - correct fitment on A10 SR...

Quantity:

+ −

57-0455, 57-1551, T455, T1551 - Triumph 12" Clutch Push Rod - Pre Unit Models With 4 Plate Clutch - Circa 1946-58

CODE: clutch0455

Triumph 12" Clutch Push Rod - 500cc Pre Unit Models With 4 Plate Clutch - Circa 1946-58

£8.95 (£10.74 inc VAT)

OEM: 57-0455, 57-1551, T455, T1551

Triumph 12" Clutch Push Rod - Pre Unit Models With 4 Plate Clutch - Circa 1946-58 Hardened steel clutch operating rod - correct fitment on pre unit 5T,...

Quantity:

+ −

CODE: clutch3234-B23

BSA / Triumph Clutch Centre Retaining Nut Distance Piece - Unit Singles Circa 1959-73

£8.95 (£10.74 inc VAT)

OEM: 40-3234, 57-2731, T2731

BSA / Triumph Clutch Centre Retaining Nut Distance Piece - Unit Singles Circa 1959-73 Clutch spacer washer - locates behind the mainshaft nut and lock...

Quantity:

+ −

CODE: clutch139-B23

Clutch Cush Rubbers Norton and AMC Models - set of 6

£7.95 (£9.54 inc VAT)

OEM: 04-0386, 04-0387

Norton/AMC clutch cush drive rubber set Set of 6 cush drive rubbers rubbers - three large and three small. OEM: 04-0386, 04-0387 Made in England

Quantity:

+ −

CODE: clutch104-B23

BSA Bantam Clutch Thrust Bearing - 90-1717

£7.95 (£9.54 inc VAT)

OEM: 90-1717

BSA Bantam Clutch Thrust Bearing - 90-1717 Needle bearing used in the clutch OEM: 90-1717

Quantity:

+ −

CODE: clutch3259-E12

BSA Clutch Cable Abutment - A50/A65 Models Circa 1962-72

£7.95 (£9.54 inc VAT)

OEM: 68-3259

BSA Clutch Cable Abutment - A50/A65 Models Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable connector assembly to...

Quantity:

+ −

CODE: clutch3646-B23

Triumph/BSA Clutch Needle Roller Thrust Washer - T150, T160 and A75 Models

£7.95 (£9.54 inc VAT)

OEM: 57-3646, T3646

Triumph/BSA Clutch Needle Roller Thrust Washer - T150, T160 and A75 Models Clutch thrust race as used on all 750cc triples from 1968 onwards. Locates...

Quantity:

+ −

CODE: clutch2215-B23

Triumph Outer Clutch Thrust Washer - T150 and T160 Trident Models

£7.45 (£8.94 inc VAT)

OEM: 57-2215, T2215

Triumph Outer Clutch Thrust Washer - T150 and T160 Trident Models Clutch shaft outer thrust washer as used on 750cc triples. Locates within the outer...

Quantity:

+ −

OEM: 57-7035, T7035, 57-4589, T4589, 57-1711, 57-3761, T1711, T3761

CODE: clutch7035-B18

Triumph Clutch Operating Actuator Thrust Plate - 650/750 Unit Twins

£6.95 (£8.34 inc VAT)

OEM: 57-7035, T7035, 57-4589, T4589, 57-1711, 57-3761, T1711, T3761

Triumph Clutch Operating Actuator Thrust Plate - 650/750 Unit Twins Suits Triumph T120, T140 from 1972-78 with 3 Ball Clutch Lever Arm OD: 1+13/16" (46mm)...

Quantity:

+ −

40-3210, 57-2721 - BSA Unit Singles Clutch Centre Front Retaining Plate

CODE: clutch628-B23

BSA Unit Singles Clutch Centre Front Retaining Plate - B25, B40, B44, B50, C15

£6.95 (£8.34 inc VAT)

OEM: 40-3210, 57-2721

BSA Unit Singles Clutch Centre Front Retaining Plate - B25, B40, B44, B50, C15 Clutch outer retaining plate as used on 4 plate clutches on BSA unit...

Quantity:

+ −

57-1045, T1045, 42-3190, 68-3025, 68-3169 - Triumph / BSA Clutch Mainshaft Cupped Washer - 350/500/650cc Twins

CODE: wash1045-B23

Triumph / BSA Clutch Mainshaft Cupped Washer - 350/500/650cc Twins Circa 1953-1967

£6.95 (£8.34 inc VAT)

OEM: 57-1045, T1045, 42-3190, 68-3025, 68-3169

Triumph / BSA Clutch Mainshaft Cupped Washer - 350/500/650cc Twins Circa 1953-1967 Clutch to mainshaft washer for models with a 3 or 4 spring clutch. BSA...

Quantity:

+ −

CODE: clutch0375-B23

BSA Primary Chain Tensioner Blade Pivot Pin - A50 and A65 Models Circa 1965-72

£6.95 (£8.34 inc VAT)

OEM: 68-0375, 68-375

BSA Primary Chain Tensioner Blade Pivot Pin - A50 and A65 Models Circa 1965-72 Primary chain tensioner blade pivot pin - correct fitment on A50 and A65...

Quantity:

+ −

57-1574, T1574 - Triumph Clutch Operating / Push Rod - T100A and T100SS Models Circa 1960-63

CODE: clutch1574-B23

Triumph Clutch Operating / Push Rod - 5TA, T100A and T100SS Models Circa 1960-63

£6.95 (£8.34 inc VAT)

OEM: 57-1574, T1574

Triumph Clutch Operating / Push Rod - T100A and T100SS Models Circa 1960-63 Hardened steel clutch operating rod as used on 500cc models fitted with 6...

Quantity:

+ −

CODE: pin5088-B18

Triumph Primary Chain Tensioner Abutment - 750cc Twins From 1973 Onwards

£6.95 (£8.34 inc VAT)

OEM: 70-5088, E5088

Triumph Primary Chain Tensioner Abutment - 750cc Twins From 1973 Onwards Chain tensioner tie rod pivot pin - locates in the crankcase. Correct fitment on...

Quantity:

+ −

CODE: clutch3813-B18

BSA Clutch Sleeve Cork Ring - M20 & M21 Single Spring Clutch

£6.45 (£7.74 inc VAT)

OEM: 66-3813

BSA Clutch Sleeve Cork Ring - M20 & M21 Single Spring Clutch Fits behind the clutch on the shaft - M20/M21 single spring clutch models. OD: 1+1/4"...

Quantity:

+ −

CODE: fkclutch268-B23-UK

Triumph/BSA Clutch Thrust Washer - Bronze Faced - Later Unit 500/650cc Models

£5.95 (£7.14 inc VAT)

OEM: 57-3931, T3931, 68-3278

Triumph/BSA Clutch Thrust Washer - Bronze Faced - Later Unit 500/650cc Models Fits Triumph T100, TR6 and T120 models from 1970 onwards + BSA 3 spring...

Options

CODE: clutch1735-B23

Clutch Thrust Washer - Triumph/BSA - Early Type with Locating Tabs

£5.45 (£6.54 inc VAT)

OEM: 57-1735

Clutch Thrust Washer - Triumph/BSA - Early Type with Locating Tabs Fits Triumph 500/650cc unit Twins up to 1969. Also fits BSA 500/650 twins with 3...

Quantity:

+ −

CODE: nut0421-B23

Triumph Clutch Hub Mainshaft Nut - Pre Unit 350/500/650cc Models from 1937-52

£5.45 (£6.54 inc VAT)

OEM: 57-0421, T421

Triumph Clutch Hub Mainshaft Nut - Pre Unit 350/500/650cc Models from 1937-52 Clutch centre nut for securing the clutch hub to the gearbox shaft. OD:...

Quantity:

+ −

CODE: clutch3413-31-B18

Burman Clutch Spring Adjuster Nut - Various Models with B52 Clutch

£5.45 (£6.54 inc VAT)

OEM: 3413-31, 11-2-2, BUR23-X-3

Burman Clutch Spring Adjuster Nut - Various Models with B52 Clutch Correct fitment for many models fitted with a B52 Burman clutch. OD: 3/8" (9.3mm)...

Quantity:

+ −

CODE: clutch1140-B23

Triumph Clutch Operating / Push Rod - T20 Tiger Cub Models From 1954 Onwards

£5.45 (£6.54 inc VAT)

OEM: 57-1140, T1140

Triumph Clutch Operating / Push Rod - T20 Tiger Cub Models From 1954 Onwards Hardened steel clutch operating rod - correct fitment on all T15 Terrier and...

Quantity:

+ −

CODE: clutch558-B23

Clutch Push Rod - BSA A7, A10, B31, B33

£4.95 (£5.94 inc VAT)

OEM: 42-3108

BSA A & B Group swinging arm clutch push rods. BSA A7, A10, B31, B33 4 Spring Clutch models 1958- Length: 11+1/2" (292mm) OD:1/4" (6.4mm) OEM: 42-3108

Quantity:

+ −

CODE: clutch037-B23

Clutch Push Rod - Triumph T120, T140

£4.95 (£5.94 inc VAT)

OEM: 57-1736

Triumph T120, T140 Clutch Push Rod Length: 11+13/16" OD: 7/32" 0.219" OEM: 57-1736

Quantity:

+ −

CODE: clutch565-B23

Tension Blade Adjuster Nut - Triumph - OEM: 70-9703

£4.95 (£5.94 inc VAT)

OEM: 70-9703, E9703, E4153, 70-4153

TENSION BLADE ADJUSTER NUT- Triumph Triumph T100, T120 Primary Tensioner adjuster sleeve nut. OEM: 70-9703, E9703, E4153, 70-4153

Quantity:

+ −

CODE: clutch1970-B23

Clutch Push Rod - Triumph 5TA, T100 - 57-1970

£4.95 (£5.94 inc VAT)

OEM: 57-1970, T1970

Clutch Push Rod - Triumph 5TA, T100 - 57-1970 Suit some 500cc Triumph models Length: 243mm approx C-Range OEM: 57-1970, T1970

Quantity:

+ −

CODE: clutch1644-B23

Triumph Clutch Cable Abutment - Earlier Unit Twins from 1963-67

£4.95 (£5.94 inc VAT)

OEM: 57-1644, T1644

Triumph Clutch Cable Abutment - Earlier Unit Twins from 1963-67 Early BSF type with hollow body and no internal threads. Correct fitment on 6T, T120 and...

Quantity:

+ −

CODE: clutch3267-B23

BSA Clutch Mainshaft Centre Nut - A7 and A10 Models With 4 Spring Clutch

£4.95 (£5.94 inc VAT)

OEM: 42-3267

BSA Clutch Mainshaft Centre Nut - A7 and A10 Models With 4 Spring Clutch Correct fitment on A7 and A10 models from 1959-63 fitted with a 4 spring...

Quantity:

+ −

CODE: nut0586-B23

Triumph Clutch Centre Lock Nut - 350/500/650/750cc Unit Twins from 1968-83

£4.95 (£5.94 inc VAT)

OEM: 21-0586, S586

Triumph Clutch Centre Lock Nut - 350/500/650/750cc Unit Twins from 1968-83 9/16" UNF Thread x 18TPI - Self Locking OEM: 21-0586, S586

Quantity:

+ −

CODE: clutch1945-B23

Triumph Clutch Actuating Arm / Spoke -350/500cc Unit Models

£4.95 (£5.94 inc VAT)

OEM: 57-1945, T1945, 57-1640, T1640

Triumph Clutch Actuating Arm / Spoke -350/500cc Unit Models Overall length from threaded end to bend: 3+3/16" (81mm) OEM: 57-1945, T1945, 57-1640, T1640

Quantity:

+ −

CODE: clutch3781-B24

BSA Clutch Spring Cup - All BSA Models Fitted with a 6 Spring Clutch

£4.95 (£5.94 inc VAT)

OEM: 66-3781

BSA Clutch Spring Cup - All BSA Models Fitted with a 6 Spring Clutch Correct fitment for all A, B M and C models fitted with a 6 Spring Clutch. OD:...

Quantity:

+ −

060751, 06-0751 - Norton Commando Clutch Diaphragm Spring Circlip

CODE: clutch0751

Norton Commando Clutch Diaphragm Spring Circlip - 060751

£4.95 (£5.94 inc VAT)

OEM: 060751, 06-0751

Norton Commando Clutch Diaphragm Spring Circlip - 060751 Large double spring retaining circlip used on all Norton Commando models. OD: 6+1/2" (165mm) ID:...

Quantity:

+ −

CODE: clutch1714-B23

Triumph Clutch Actuating Arm / Spoke - Short Type for 650cc Unit Models Circa 1963-67

£4.95 (£5.94 inc VAT)

OEM: 57-1714, T1714

Triumph Clutch Actuating Arm / Spoke - Short Type for 650cc Unit Models Circa 1963-67 Overall length : 1+11/16" (43mm) OD: 0.11" (2.7mm) OEM: 57-1714,...

Quantity:

+ −

57-3941, T3941 - riumph/BSA Clutch Retaining Plate Tab Washer Set - T150, T160 and A75 Models Circa 1969-75

CODE: clutch3941-set-B18

Triumph/BSA Clutch Retaining Plate Tab Washer Set - T150, T160 and A75 Models Circa 1969-75

£4.95 (£5.94 inc VAT)

OEM: 57-3941, T3941

Triumph/BSA Clutch Retaining Plate Tab Washer Set - T150, T160 and A75 Models Circa 1969-75 Set of 3 clutch shock absorber retaining plate tab washers as...

Quantity:

+ −

CODE: clutch117B-B23

Triumph / BSA Clutch Spring Nut - Pre Unit and Unit Twins - Brass

£4.75 (£5.70 inc VAT)

OEM: 57-2526, T2526, 42-3199, T427, 57-0427

Triumph / BSA Clutch Spring Nut - Pre Unit and Unit Twins - Brass Clutch spring adjuster nut as used on both pre unit and unit models. Triumph:...

Quantity:

+ −

CODE: clutch219-B23

Triumph/BSA Clutch Adjusting Screw - 3/8" UNF

£4.45 (£5.34 inc VAT)

OEM: 57-2159, 68-3308, T2159

Triumph/BSA Clutch Adjusting Screw - 3/8" UNF Clutch adjuster screw/pin for Triumph T120, T140 and BSA A65 models. Use with our steel or billet alloy 3...

Quantity:

+ −

57-0413, T413 - Triumph Clutch Operating Arm Adjusting Pin With Ball - Pre Unit 350/500/650cc Models

CODE: clutch0413-B23

Triumph Clutch Push Rod Adjuster Pin With Ball - Pre Unit 350/500/650cc Models

£4.45 (£5.34 inc VAT)

OEM: 57-0413, T413

Triumph Clutch Operating Arm Adjusting Pin With Ball - Pre Unit 350/500/650cc Models Clutch lever adjusting pin with captive ball bearing - correct...

Quantity:

+ −

CODE: clutch1670-B23

Triumph T20 Clutch Spring Pin - Tiger Cub Models Circa 1962-67

£4.45 (£5.34 inc VAT)

OEM: 57-1670, T1670

Triumph T20 Clutch Spring Pin - Tiger Cub Models Circa 1962-67 Clutch spring stud as used on all T20 Tiger Cub + Super Cub and Bantam Cub models from 1962...

Quantity:

+ −

CODE: fkclutch127-B23

Clutch Spring Stud - Norton, AMC

£3.99 (£4.79 inc VAT)

OEM: 04-3441, 04-0484, NM23307

CLUTCH SPRING STUD - AMC, Norton Norton, AMC Clutch spring stud for pre-Commando models using the AMC clutch. (3 studs usually required per Clutch)...

Quantity:

+ −

CODE: clutch3762-B18

Clutch Cable Abutment - Triumph (Late Models)

£3.95 (£4.74 inc VAT)

OEM: 57-3762

Triumph T120/T140 cable abutment (threaded for screw in adjuster) OEM: 57-3762, T3762

Quantity:

+ −

CODE: clutch1931H-B24

Triumph/BSA Clutch Spring Cup - 3 or 4 Spring - Pre Unit and Unit Models - 1951 Onwards

£3.95 (£4.74 inc VAT)

OEM: T1931, 57-1931, 68-3287, 42-3197, 57-0998

Triumph/BSA Clutch Spring Cup - 3 or 4 Spring - Pre Unit and Unit Models - 1951 Onwards To fit 3 spring AND 4 spring clutch plate hubs. Correct fitment...

Quantity:

+ −

CODE: clutch7034-B18

Triumph Clutch Operating Lever - 650/750 Unit Twins

£3.95 (£4.74 inc VAT)

OEM: 57-4588, 57-7034, 57-4441, T4588, T7034, T4441

Triumph Clutch Operating Lever - 650/750 Unit Twins Suits Triumph T120, T140 from 1972-78 with 3 Ball Clutch Lever Arm OEM: 57-4588, 57-7034, 57-4441,...

Quantity:

+ −

CODE: clutch14-2-8m-B23

Burman Clutch Spring Bolt/Stud - Various Models B52 Clutch

£3.95 (£4.74 inc VAT)

OEM: 14-2-8, 24-X-11

Burman Clutch Spring Bolt/Stud - Various Models B52 Clutch Correct fitment for many models fitted with a Burman clutch with 5 friction plates. OD:...

Quantity:

+ −

CODE: clutch0433-B23

BSA Clutch Woodruff Key - Adapter to Mainshaft - 6 Spring or Triumph Type 4 Spring Clutch

£3.95 (£4.74 inc VAT)

OEM: 02-0433, 2-433

BSA Clutch Woodruff Key - Adapter to Mainshaft - 6 Spring or Triumph Type 4 Spring Clutch Correct fitment on BSA A7 and A10 models circa 1954-1962 and B...

Quantity:

+ −

CODE: washer-set277-B23

Triumph T20 Tiger Cub Tab Washer Set - Clutch Centre and Rotor Lock Washers - Circa 1960 Onwards

£3.95 (£4.74 inc VAT)

OEM: 70-4058, 70-3975, 57-1347, E4058, E3975, T1347

Triumph T20 Tiger Cub Tab Washer Set - Clutch Centre and Rotor Lock Washers - Circa 1960 Onwards Mainshaft / clutch hub lockwasher + two rotor...

Quantity:

+ −

67-3257 - BSA Clutch Centre and Mainshaft Nut - A7 / A10 Plunger Frame Models Circa 1949-57

CODE: clutch3257-B23

BSA Clutch Centre and Mainshaft Nut - 6 Spring A7 / A10 Plunger Frame Models Circa 1949-57

£3.95 (£4.74 inc VAT)

OEM: 67-3257

BSA Clutch Centre and Mainshaft Nut - A7 / A10 Plunger Frame Models Circa 1949-57 Clutch centre locknut with chamfered edges on both sides. Correct...

Quantity:

+ −

CODE: wash4794-B18

Triumph Clutch Mainshaft Washer - 500/650/750cc Unit Twins from 1968 onwards

£3.75 (£4.50 inc VAT)

OEM: 57-4794, 57-2279, T4794, T2279

Triumph Clutch Mainshaft Washer - 500/650/750cc Unit Twins from 1968 onwards OD: 1+3/8" (35mm) ID: 9/16" (14.5mm) Depth: 3/6" (5mm) OEM: 57-4794,...

Quantity:

+ −

CODE: clutch117S-B23

Triumph / BSA Clutch Spring Nut - Pre Unit and Unit Twins - Steel

£3.45 (£4.14 inc VAT)

OEM: 57-2526, T2526, 42-3199, T427, 57-0427

Triumph / BSA Clutch Spring Nut - Pre Unit and Unit Twins - Steel Clutch spring adjuster nut as used on both pre unit and unit models. Triumph:...

Quantity:

+ −

57-1047, T1047, 68-3030 - Triumph / BSA Clutch Hub Mainshaft Nut

CODE: nut1047-B23

Triumph / BSA Clutch Hub Mainshaft Nut - Circa 1953-67

£3.45 (£4.14 inc VAT)

OEM: 57-1047, T1047, 68-3030, 68-3300

Triumph / BSA Clutch Hub Mainshaft Nut - Circa 1953-67 Clutch centre nut for securing the clutch hub to the gearbox shaft. BSA A50, A65 + Triumph T90,...

Quantity:

+ −

41-3215, 57-2748, 57-1146, 40-3219 - BSA/Triumph Clutch Spring Nut - Unit Singles - C15, B25, B40, TR25W

CODE: clutch557-B23

BSA/Triumph Clutch Spring Nut - Unit Singles - C15, B25, B40, TR25W, T20

£3.45 (£4.14 inc VAT)

OEM: 41-3215, 57-2748, 57-1146, 40-3219

BSA/Triumph Clutch Spring Nut - Unit Singles - C15, B25, B40, TR25W, T20 Fits BSA Unit singles, clutch spring nut. Fits BSA C15/B25/B40/B50 Also fits...

Quantity:

+ −

CODE: clutch3203-B24

BSA/Triumph Clutch Spring Cup - Pre Unit and Early Unit Twins - Short Type

£3.45 (£4.14 inc VAT)

OEM: 42-3203, 57-1934, 57-0425, T425

BSA/Triumph Clutch Spring Cup - Pre Unit and Early Unit Twins - Short Type Correct fitment on many Triumph 350/500/650cc twins circa 1938-62. Also correct...

Quantity:

+ −

CODE: clutch3218-B24

BSA/Triumph Clutch Spring Cup - 4 Spring - Unit Singles Circa 1959-68 - Short Type

£3.45 (£4.14 inc VAT)

OEM: 40-3218, 57-1927, T1927

BSA/Triumph Clutch Spring Cup - 4 Spring - Unit Singles Circa 1959-68 - Short Type Clutch spring cup for BSA singles - C15, B40 + early B25 and TR5W...

Quantity:

+ −

CODE: clutch3263-E12

BSA Clutch Cable Adapter / Stop - A50/A65 Models Circa 1962-72

£3.45 (£4.14 inc VAT)

OEM: 68-3263

BSA Clutch Cable Adapter / Stop - A50/A65 Models Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable abutment and...

Quantity:

+ −

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Clutch Parts

Bestsellers Bestsellers

Account Details

Quick Links

Feked.com

Feked Online