.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Clutch

clutch0861-B23
£0.65 (£0.78 inc VAT)
OEM: 68-0861, 68-861
BSA Primary Chain Tensioner Screw Oil Seal Washer - A50 and A65 Models Circa 1965-72 Oil seal washer with rubber insert, locates over the adjuster screw -...
+

clutch2368-B23
£0.75 (£0.90 inc VAT)
OEM: 60-2368, D2368
3/8" Ball Bearing - Single Ball - Universal Use 3/8" (10mm approx) diameter Suitable for use with Triumph Unit Twins fitted with a 3 ball Clutch...
+

fkclutch109-B23
£0.95 (£1.14 inc VAT)
OEM: 57-1046, T1046, 42-3191
Triumph / BSA Clutch Locking Tab Washer - 350/500/650cc Twins Circa 1953-1967 BSA A50, A65, B31, B33 + Triumph 3TA, 3TA, 5T, TR5, T100, T110, 6T, TR6,...
+

screw1040-B23
£0.95 (£1.14 inc VAT)
OEM: T1040, 57-1040
Triumph Clutch centre - Countersunk Screw - 57-1040 Screws for the clutch hub centre front plate OEM: T1040, 57-1040
+

clutch1937-B23
£0.95 (£1.14 inc VAT)
OEM: 57-1937, T1937
Triumph Clutch Actuating Arm / Spoke Nut  - 350/500/650cc Unit Models OD: 1/4"" (6.4mm) OEM: 57-1937, T1937
+

clutch3221-B23
£0.95 (£1.14 inc VAT)
OEM: 40-3221 57-2732, T2732
Triumph/BSA Clutch Tab Lockwasher - Unit Singles - C15, B Group + TR25W C15, B25, B40, B44, B50 and Triumph TR25W models. OEM:  40-3221 57-2732, T2732
+

bolt2157-B23
£0.95 (£1.14 inc VAT)
OEM: 21-2157, S2157
Triumph Clutch Centre Bolt - 650/750cc Unit Twins from 1971-82 Secures the clutch inner and outer plates to the clutch centre - correct fitment on later...
+

wash7244-B23
£0.95 (£1.14 inc VAT)
OEM: 71-7244, E17244
Triumph Electric Start Sprag Clutch Bearing Outer Retainer Ring - T140, TSS and TSX Models Sprag clutch bearing outer support ring as used on 750cc...
+

wash7245-B23
£0.95 (£1.14 inc VAT)
OEM: 71-7245, E17245
Triumph Electric Start Sprag Clutch Bearing Inner Spacer Ring - T140, TSS and TSX Models Sprag clutch bearing inner support ring as used on 750cc models...
+

clutch061-B23
£0.99 (£1.19 inc VAT)
OEM: 06-8072
Norton Commando, Clutch Distance Circlip - 06-8072 OEM: 06-8072, 068072
+

clutch3236-B23
£1.25 (£1.50 inc VAT)
OEM: 57-0524, 42-3236
Clutch Mainshaft Locking Tab Washer - Pre Unit Triumph / BSA A7 and A10 BSA A7/A10 models from 1959-63 with a 4 spring Triumph type non cush drive...
+

clutch216H-B23
£1.25 (£1.50 inc VAT)
OEM: 57-4189, 40-3230
BSA B25, B44, B50 and C15 - Clutch centre adjuster screw. BSF threads. OEM: 57-4189, 40-3230
+

clutch1132-B23
£1.45 (£1.74 inc VAT)
OEM: 57-1132, T1132
Triumph Large Clutch Cush Drive Rubber - T20 Tiger Cub Models From 1954 Onwards Large clutch shock absorber drive rubber as used on all T15 Terrier and...
+

clutch193-B23
£1.45 (£1.74 inc VAT)
OEM: 57-1473, T1473, 57-1043, T1043
Small Clutch cush rubber (4 spring models). Fits 5T, 6T, Tiger 110, T100 and T120 Bonneville. Price is for ONE (1) rubber, you will need 4 for the clutch...
+

clutch192-B23
£1.45 (£1.74 inc VAT)
OEM: 57-1472
Large Clutch cush rubber (4 spring models). Fits 5T, 6T, Tiger 110, T100 and T120 Bonneville. Price is for ONE (1) rubber, you will need 4 for the clutch...
+

clutch1712-B23
£1.45 (£1.74 inc VAT)
OEM: 57-1712, T1712
Triumph 3 Ball Mechanism Clutch Cone Spring - 650/750 Unit Twins Thrust Return Cone Spring - Triumph T120, T140 from 1972-78 with 3 Ball Clutch Lever Arm...
+

clutch170-B23
£1.45 (£1.74 inc VAT)
OEM: 41-3212, 57-2723, 41-3211
BSA Unit Singles Clutch Cush Rubber - B25, B40, B44, B50, C15 Clutch cush rubber as used on 4 plate clutches on BSA unit singles circa 1959-70 + Triumph...
+

clutch0422-B23
£1.45 (£1.74 inc VAT)
OEM: 57-0422, T422
Triumph 4 Spring Clutch Pressure Plate Thrust Button - Pre Unit 350/500/650cc Models Circa 1946-62 Clutch push rod cup for all pre unit models with a 4...
+

clutch0453-B23
£1.45 (£1.74 inc VAT)
OEM: 57-0453, T453, 60-4261
Triumph Clutch Operating Arm Adjusting Pin Lock Nut - Pre Unit 350/500/650cc Models Lock nut for use with the clutch pushrod adjuster screw as fitted to...
+

trun5977-B18
£1.45 (£1.74 inc VAT)
OEM: 70-5977, E5977
Triumph Primary Chain Tensioner Blade Trunnion - 500/650cc Models Circa 1966-73 + T150 Models Correct fitment on T90 and T100 models circa 1966-67 + T120...
+

clutch1318-B23
£1.45 (£1.74 inc VAT)
OEM: 57-1318, T1318
Triumph Small Clutch Rebound Rubber - T20 Tiger Cub Models From 1954 Onwards Small clutch shock absorber rebound rubber as used on all T15 Terrier and T20...
+

clutch313H-B23
£1.75 (£2.10 inc VAT)
OEM: 57-1722, 68-3281
Large Clutch Cush Drive Rubber. BSA A50/A65, Triumph T100/T120/T140. 3 Spring Clutch. Please note: These rubbers are a very tight fit in the cush drive, they...
+

clutch312H-B23
£1.75 (£2.10 inc VAT)
OEM: 57-1723, T1723 68-3282, 57-1185, T1185
Small Clutch Cush Drive Rubber. BSA A50/A65, Triumph T100/T120/T140 3 and 4 Spring Clutch. Please note: These rubbers are a very tight fit in the cush...
+

clutch374-B23
£1.75 (£2.10 inc VAT)
OEM: 06-0754
Norton Commando Clutch Bearing Outer Circlip - 06-0754 OEM: 06-0754
+

trun4148-B18
£1.75 (£2.10 inc VAT)
OEM: 70-4148, E4148
Triumph Primary Chain Tensioner Blade Trunnion - 350/500cc Models Circa 1960-74 Correct fitment on 3TA, 5TA and T100 models circa 1960-65 + 1968 onwards...
+

clutch043c-B23
£1.75 (£2.10 inc VAT)
OEM: 57-1646, 68-3264
Clutch Cable Adjuster Sleeve /Rubber Boot For Triumph 650cc and 750cc models OEM: 57-1646, 68-3264, T1646
+

spr971H-B24
£1.95 (£2.34 inc VAT)
OEM: 57-4644
Triumph Clutch Spring, for Triumph T140, TR7 (1973-85) Clutch spring for 3 and 4 spring clutches. Length: 1+3/4" (45mm) Diameter: 21/32" (17mm) Price is...
+

spr012-B24
£1.95 (£2.34 inc VAT)
OEM: 90-1367
BSA Bantam Clutch Spring (all models) Price is for One Spring Length: 1+3/16" (30mm) Diameter: 1/2" (13mm) OEM: 90-1367
+

spr198-T-B24
£1.95 (£2.34 inc VAT)
OEM: 57-2727, 40-3231
Triumph Clutch Spring, for Triumph TR25, T20 Tiger Cub Price is for One Spring Length: 1+7/8" (48mm) Diameter: 1/2" (13mm) OEM: 57-2727, 40-3231, T1145,...
+

spr032-B24
£1.95 (£2.34 inc VAT)
OEM: 57-0999, T999, 42-3273, 68-3236
Triumph Clutch Spring, for Triumph 3TA, 5TA, T100 etc Correct fitment on models with a four spring clutch with 5 driving (friction) plates and 6 driven...
+

spr034-B24
£1.95 (£2.34 inc VAT)
OEM: 57-1560
Triumph Clutch Spring, for Triumph 350cc, 500cc (Late 3 Spring models) Price is for One Spring Length: 2" (50mm) Diameter: 5/8" (16mm) OEM: 57-1560
+

spr033-B-B24
£1.95 (£2.34 inc VAT)
OEM: 57-1830, 68-3321, 57-1769, 68-3288
BSA Clutch Spring, for BSA A50, A65 Price is for One Spring Length: 1+3/4" (45mm) Diameter: 5/8" (16mm) OEM: 57-1830, 68-3321, 57-1769, 68-3288
+

clutch553-B23
£1.95 (£2.34 inc VAT)
OEM: 57-2719, E9777
ROLLERS - Triumph/BSA/Villiers - 57-2719, 42-3206 Clutch Rollers for BSA and Triumph Unit singles. Also fits Villiers 9E,10E and 250cc A series...
+

spring3247-B24
£1.95 (£2.34 inc VAT)
OEM: 67-3247
BSA Clutch Spring - A7, A10 Plunger & Rigid Frame Models - 6 Spring Clutch BSA clutch spring for six spring clutches as fitted to BSA A Group plunger...
+

trun5087-B18
£1.95 (£2.34 inc VAT)
OEM: 70-5087, E5087
Triumph Primary Chain Tensioner Blade Trunnion - 750cc Twins From 1973 Onwards Correct fitment on T140 and TR7 models circa 1973-85. Length: 1+3/8"...
+

spr1742-B24
£1.95 (£2.34 inc VAT)
OEM: 57-1742, T1742
Triumph Clutch Spring - Heavy Duty Type For T20 Tiger Cub Models From 1964 Onwards Correct fitment on T20, T20SS, T20SH and T20SM models from 1964...
+

spr0429-B24
£1.95 (£2.34 inc VAT)
OEM: 57-0429, T429
Triumph Clutch Spring - 9 Plate / 4 Spring - 350/500cc Pre Unit + 3TA and 5TA Models Correct fitment on models with a four spring clutch with 4 driving...
+

spr198-B-B24
£1.95 (£2.34 inc VAT)
OEM: 57-2727, 40-3231
BSA Clutch Spring, for BSA Unit singles C15, B40, B25, B44, B50 Price is for One Spring Length: 1+7/8" (48mm) Diameter: 1/2" (13mm) OEM: 57-2727,...
+

spr033-T-B24
£1.95 (£2.34 inc VAT)
OEM: 57-1830, 68-3321, 57-1769, T1830, T1769
Triumph Clutch Spring, for Triumph T120 (3 spring models) with 6 plate clutch, Triumph 500cc (1963-73), 650cc (1963-74), 750cc (1973-83) Price is for One...
+

clutch3940-set-B23
£1.95 (£2.34 inc VAT)
OEM: 57-3940, T3940
Triumph/BSA Clutch Retaining Plate Tab Washer Set - T150, T160 and A75 Models Circa 1969-75 Set of 6 2BA bolts to secure the clutch spider retaining plate...
+

spr3469-B24
£1.95 (£2.34 inc VAT)
OEM: 29-3469
BSA Clutch Spring - C10L, C11G and C12 Models - 3 Spring / 4 Plate Clutch Correct fitment on C10L, C11G and C12 models from 1954 onwards - three spring...
+

clutch3822-B18
£1.95 (£2.34 inc VAT)
OEM: 65-3822
BSA Clutch Centre / Mainshaft Nut Locking Washer - 6 Spring Clutch A, B, M and C Group Models Mainshaft nut locking washer as used on six spring A7,...
+

spring152-B24
£1.99 (£2.39 inc VAT)
OEM: 66-3800
BSA Clutch Spring - 6 Spring version - 66-3800 BSA Clutch spring for Six spring clutches as fitted to BSA A, B and M Group models including :- A7, A10...
+

spr064-B24
£2.45 (£2.94 inc VAT)
OEM: 04-0358, 04-0385
Norton AMC Clutch Spring, for Norton AMC Models Price is for One Spring Length: 1+13/16" (46mm) Diameter: 11/16" (17mm) OEM: 04-0358, 04-0385
+

clutch4253-B18
£2.45 (£2.94 inc VAT)
OEM: 68-3218, 60-4253, S66-1, 21-0066
BSA / Triumph Clutch Hub To Mainshaft / Alternator Rotor Woodruff Key Clutch hub to gearbox mainshaft key, prevents the clutch hub turning on the shaft....
+

fkclutch116-B23
£2.45 (£2.94 inc VAT)
OEM: 57-0423A, 57-4754, 42-3189, T4754, T423A
Triumph/BSA Clutch Spring Bolt - Pre Unit and Unit Twins - 3 or 4 Spring Clutch Clutch spring bolt to fit many Triumph 350/500/650/750cc twins + later...
+

clutch0423-B23
£2.45 (£2.94 inc VAT)
OEM: 57-0423, T423
Triumph Clutch Spring Bolt - Pre Unit Models With 4 Friction Plate Clutch + 3TA Models Short type clutch spring screwed pin. Correct fitment on 5T, TR5...
+

fkclutch134-B23
£2.95 (£3.54 inc VAT)
OEM: 04-0389
CLUTCH SPRING NUT - AMC, Norton Norton, AMC clutch spring adjuster nut for models using pre-Commando AMC clutches 3 nuts usually required per clutch...
+

clutch189-B23
£2.95 (£3.54 inc VAT)
OEM: 57-0394, T394, 42-3206
ROLLERS - Triumph/BSA/Norton/AMC Clutch centre rollers for Triumph and BSA (late A10-A50/A65 Models) 1/4" x 6mm Price per pack of 10 rollers OEM:...
+

clutch046-B23
£2.95 (£3.54 inc VAT)
OEM: 57-0495, T495
Clutch Lever Rubber - Triumph - 57-0495, T495 Triumph Pre-Unit Clutch lever rubber boot. OEM: 57-0495, T495
+

clutch2062-B23
£2.95 (£3.54 inc VAT)
OEM: 57-2062
Clutch Cable Abutment - Short Slotted Ferrule Type - Triumph Unit Twins Pre 1968 Overall Length: 9/16" (14.5mm) Diameter: 7/16" (11mm) OEM: 57-2062, T2062
+

clutch2063H-B23
£2.95 (£3.54 inc VAT)
OEM: 57-2063
Clutch Cable Abutment - Long Slotted Ferrule Type - Triumph Unit Twins 1963-70 Overall Length: 7/8" (22mm) Diameter: 7/16" (11mm) OEM: 57-2063
+

clutch3249-B23
£2.95 (£3.54 inc VAT)
OEM: 67-3249
BSA Clutch Spring Nut - A7, A10 Models - Plunger & Rigid + C Group with 3 Spring Clutch Correct fitment for all A Group models from 1960-62 fitted...
+

clutch11-7-11-B23
£2.95 (£3.54 inc VAT)
OEM: 11-7-11
Burman Clutch Centre Retaining Nut - Various Models B52 Clutch Clutch centre mainshaft retaining nut. OD: 1+3/16" (30mm) ID: 5/8" 20 TPI Made in...
+

clutch650-B23
£2.95 (£3.54 inc VAT)
OEM: 26-0650, 26-650
Clutch Rollers - BSA - 26-0650 - pack 10 Clutch centre rollers for BSA, duplex chain type BSA A7 and A10 early models with the 6-spring clutch and...
+

clutch3459-B18
£2.95 (£3.54 inc VAT)
OEM: 063459, 06-3459
Norton Commando Clutch Centre Tab Lockwasher - 063459 Clutch centre tab lockwasher as used on all Norton Commando models. Overall length: 1+7/8" (48mm)...
+

clutch3951-B24
£2.95 (£3.54 inc VAT)
OEM: 57-3951, 57-4121
BSA/Triumph Clutch Spring Cup - 4 Spring - Unit Singles Circa 1969-73 - Long Type Clutch spring cup for BSA singles - B50 and later C25/B25 + TR5W models...
+

clutch1554-B23
£2.95 (£3.54 inc VAT)
OEM: 57-1554, T1554
Triumph Clutch Operating Arm Screwed Peg - Pre Unit 500/650cc Models Circa 1958-62 Screwed peg that holds the clutch operating lever to the arm as fitted...
+

c/cable3475-B18
£2.95 (£3.54 inc VAT)
OEM: 70-3475, E3475
Clutch Cable / Outer Gearbox Cover Grommet - Triumph Unit 350/500cc Models Circa 1958-63 Rubber grommet locates on the top of the outer gearbox casing to...
+

clutch0376-B23
£2.95 (£3.54 inc VAT)
OEM: 68-0376, 68-376
BSA Primary Chain Tensioner Blade Spacer - A50 and A65 Models Circa 1965-72 Primary chain tensioner blade spacer - correct fitment on A50 and A65 models...
+

clutch0377-B23
£2.95 (£3.54 inc VAT)
OEM: 68-0377, 68-377
BSA Primary Chain Tensioner Adjuster Screw Cap Nut - BSA A50 and A65 Models Circa 1964-72 Threaded cap nut - locates on the bottom of the primary...
+

clutch1669-B24
£2.95 (£3.54 inc VAT)
OEM: 57-1669, T1669
Triumph T20 Inner Clutch Spring Cup - Tiger Cub Models Circa 1962-67 Inner clutch spring cup - locates within the clutch centre - as used on all T20 Tiger...
+

clutch0356-B23
£2.95 (£3.54 inc VAT)
OEM: 04-0356, 040356, A2/402
Clutch Spring Stud Nut - Norton + AJS/Matchless AMC Models Clutch stud to centre stepped nut as used on Norton and AJS/Matchless models fitted with an...
+

clutch1645-B23
£2.95 (£3.54 inc VAT)
OEM: 57-1645, T1645
Triumph Clutch Cable Abutment Adaptor / Ferrule - Unit Twins Circa 1961-71 + T150 Models Short type slotted ferrule for use with a standard clutch cable...
+

clutch117S-B23
£3.45 (£4.14 inc VAT)
OEM: 57-2526, T2526, 42-3199, T427, 57-0427
Triumph / BSA Clutch Spring Nut - Pre Unit and Unit Twins - Steel Clutch spring adjuster nut as used on both pre unit and unit models. Triumph:...
+

nut1047-B23
£3.45 (£4.14 inc VAT)
OEM: 57-1047, T1047, 68-3030, 68-3300
Triumph / BSA Clutch Hub Mainshaft Nut - Circa 1953-67 Clutch centre nut for securing the clutch hub to the gearbox shaft. BSA A50, A65 + Triumph T90,...
+

clutch557-B23
£3.45 (£4.14 inc VAT)
OEM: 41-3215, 57-2748, 57-1146, 40-3219
BSA/Triumph Clutch Spring Nut - Unit Singles - C15, B25, B40, TR25W, T20 Fits BSA Unit singles, clutch spring nut. Fits BSA C15/B25/B40/B50 Also fits...
+

clutch3203-B24
£3.45 (£4.14 inc VAT)
OEM: 42-3203, 57-1934, 57-0425, T425
BSA/Triumph Clutch Spring Cup - Pre Unit and Early Unit Twins - Short Type Correct fitment on many Triumph 350/500/650cc twins circa 1938-62. Also correct...
+

clutch3218-B24
£3.45 (£4.14 inc VAT)
OEM: 40-3218, 57-1927, T1927
BSA/Triumph Clutch Spring Cup - 4 Spring - Unit Singles Circa 1959-68 - Short Type Clutch spring cup for BSA singles - C15, B40 + early B25 and TR5W...
+

clutch3263-E12
£3.45 (£4.14 inc VAT)
OEM: 68-3263
BSA Clutch Cable Adapter / Stop - A50/A65 Models Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable abutment and...
+

clutch0420-B23
£3.45 (£4.14 inc VAT)
OEM: 57-0420, T420
Triumph Clutch Mainshaft Spacer / Washer - Pre Unit 350/500/650cc Models from 1946-52 Clutch to mainshaft plain nut washer as used on 3T, T85, 5T, TR5,...
+

clutch3784-B18
£3.45 (£4.14 inc VAT)
OEM: 57-3784, T3784
Triumph Clutch Cable Abutment - Later Unit 500cc Models Circa 1969-74 Later UNC type with hollow body and no internal threads. Correct fitment on T100...
+

clutch1256-B23
£3.45 (£4.14 inc VAT)
OEM: 57-1256, T1256
Triumph Clutch Adjuster Pin - Unit 350/500/650cc Models Pre 1965 + T20 Tiger Cub Models Clutch pushrod adjuster screw - correct fitment on 3TA, 5TA and...
+

wash4794-B18
£3.75 (£4.50 inc VAT)
OEM: 57-4794, 57-2279, T4794, T2279
Triumph Clutch Mainshaft Washer - 500/650/750cc Unit Twins from 1968 onwards OD: 1+3/8" (35mm) ID: 9/16" (14.5mm) Depth: 3/6" (5mm) OEM: 57-4794,...
+

clplt299-B24
£3.95 (£4.74 inc VAT)
OEM: 57-2725, 40-3220
BSA C15, C25, B25, B40, B44, B50 - Clutch Steel Plates Inside Diameter: 93mm Outside Diameter: 134mm Stub Length: 5.65mm Available as standard or...

clutch3762-B18
£3.95 (£4.74 inc VAT)
OEM: 57-3762
Triumph T120/T140 cable abutment (threaded for screw in adjuster) OEM: 57-3762, T3762
+

clutch1931H-B24
£3.95 (£4.74 inc VAT)
OEM: T1931, 57-1931, 68-3287, 42-3197, 57-0998
Triumph/BSA Clutch Spring Cup - 3 or 4 Spring - Pre Unit and Unit Models - 1951 Onwards To fit 3 spring AND 4 spring clutch plate hubs. Correct fitment...
+

clutch7034-B18
£3.95 (£4.74 inc VAT)
OEM: 57-4588, 57-7034, 57-4441, T4588, T7034, T4441
Triumph Clutch Operating Lever - 650/750 Unit Twins Suits Triumph T120, T140 from 1972-78 with 3 Ball Clutch Lever Arm OEM: 57-4588, 57-7034, 57-4441,...
+

clutch14-2-8m-B23
£3.95 (£4.74 inc VAT)
OEM: 14-2-8, 24-X-11
Burman Clutch Spring Bolt/Stud - Various Models B52 Clutch Correct fitment for many models fitted with a Burman clutch with 5 friction plates. OD:...
+

clutch0433-B23
£3.95 (£4.74 inc VAT)
OEM: 02-0433, 2-433
BSA Clutch Woodruff Key - Adapter to Mainshaft - 6 Spring or Triumph Type 4 Spring Clutch Correct fitment on BSA A7 and A10 models circa 1954-1962 and B...
+

washer-set277-B23
£3.95 (£4.74 inc VAT)
OEM: 70-4058, 70-3975, 57-1347, E4058, E3975, T1347
Triumph T20 Tiger Cub Tab Washer Set - Clutch Centre and Rotor Lock Washers - Circa 1960 Onwards Mainshaft / clutch hub lockwasher + two rotor...
+

clutch3257-B23
£3.95 (£4.74 inc VAT)
OEM: 67-3257
BSA Clutch Centre and Mainshaft Nut - A7 / A10 Plunger Frame Models Circa 1949-57 Clutch centre locknut with chamfered edges on both sides. Correct...
+

fkclutch127-B23
£3.99 (£4.79 inc VAT)
OEM: 04-3441, 04-0484, NM23307
CLUTCH SPRING STUD - AMC, Norton Norton, AMC Clutch spring stud for pre-Commando models using the AMC clutch. (3 studs usually required per Clutch)...
+

clutch219-B23
£4.45 (£5.34 inc VAT)
OEM: 57-2159, 68-3308, T2159
Triumph/BSA Clutch Adjusting Screw - 3/8" UNF Clutch adjuster screw/pin for Triumph T120, T140 and BSA A65 models. Use with our steel or billet alloy 3...
+

clutch0413-B23
£4.45 (£5.34 inc VAT)
OEM: 57-0413, T413
Triumph Clutch Operating Arm Adjusting Pin With Ball - Pre Unit 350/500/650cc Models Clutch lever adjusting pin with captive ball bearing - correct...
+

clutch1670-B23
£4.45 (£5.34 inc VAT)
OEM: 57-1670, T1670
Triumph T20 Clutch Spring Pin - Tiger Cub Models Circa 1962-67 Clutch spring stud as used on all T20 Tiger Cub + Super Cub and Bantam Cub models from 1962...
+

clutch117B-B23
£4.75 (£5.70 inc VAT)
OEM: 57-2526, T2526, 42-3199, T427, 57-0427
Triumph / BSA Clutch Spring Nut - Pre Unit and Unit Twins - Brass Clutch spring adjuster nut as used on both pre unit and unit models. Triumph:...
+

clutch558-B23
£4.95 (£5.94 inc VAT)
OEM: 42-3108
BSA A & B Group swinging arm clutch push rods. BSA A7, A10, B31, B33 4 Spring Clutch models 1958- Length: 11+1/2" (292mm) OD:1/4" (6.4mm) OEM: 42-3108
+

clutch037-B23
£4.95 (£5.94 inc VAT)
OEM: 57-1736
Triumph T120, T140 Clutch Push Rod Length: 11+13/16" OD: 7/32" 0.219" OEM: 57-1736
+

clplt341p-B24
£4.95 (£5.94 inc VAT)
Norton 1960 on, Late AMC - Clutch Friction Plates. Steel Plate Inside Diameter: 90mm(between stubs) Outside Diameter: 148mm Stub Length: 9.8mm
+

clplt342-B24
£4.95 (£5.94 inc VAT)
OEM: 90-0037
BSA Bantam Clutch Steel plate (Surflex) Made in Italy by Surflex OEM: 90-0037
+

clutch565-B23
£4.95 (£5.94 inc VAT)
OEM: 70-9703, E9703, E4153, 70-4153
TENSION BLADE ADJUSTER NUT- Triumph Triumph T100, T120 Primary Tensioner adjuster sleeve nut. OEM: 70-9703, E9703, E4153, 70-4153
+

clutch1970-B23
£4.95 (£5.94 inc VAT)
OEM: 57-1970, T1970
Clutch Push Rod - Triumph 5TA, T100 - 57-1970 Suit some 500cc Triumph models Length: 243mm approx C-Range OEM: 57-1970, T1970
+

clutch1644-B23
£4.95 (£5.94 inc VAT)
OEM: 57-1644, T1644
Triumph Clutch Cable Abutment - Earlier Unit Twins from 1963-67 Early BSF type with hollow body and no internal threads. Correct fitment on 6T, T120 and...
+

clutch3267-B23
£4.95 (£5.94 inc VAT)
OEM: 42-3267
BSA Clutch Mainshaft Centre Nut -  A7 and A10 Models With 4 Spring Clutch Correct fitment on A7 and A10 models from 1959-63 fitted with a 4 spring...
+

nut0586-B23
£4.95 (£5.94 inc VAT)
OEM: 21-0586, S586
Triumph Clutch Centre Lock Nut - 350/500/650/750cc Unit Twins from 1968-83 9/16" UNF Thread x 18TPI - Self Locking OEM: 21-0586, S586
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.