Engine & Transmission

CODE: clutch4903-B23

Triumph Complete Clutch Assembly - T140 and TR7 Models Circa 1973-83

£354.95 (£425.94 inc VAT)

OEM: 57-4903, T4903, 57-7056, T7056

Triumph Complete Clutch Assembly - T140 and TR7 Models Circa 1973-83 Complete clutch assembly - 58 tooth triplex chain clutch sprocket/basket - 6 plate, 3...

Quantity:

+ −

CODE: clutch1933

Triumph Compete 5 Plate Clutch Assembly - 3TA Models Circa 1964-66

£354.95 (£425.94 inc VAT)

OEM: 57-1933, T1933

Triumph Compete 5 Plate Clutch Assembly - 3TA Models Circa 1964-66 Correct fitment on later 3TA models from 1964-66. Supplied as a complete assembly...

Quantity:

+ −

CODE: clutch1928

Triumph Compete Clutch Assembly - 650cc Unit Models Circa 1963-72

£354.95 (£425.94 inc VAT)

OEM: 57-1928, T1928

Triumph Compete Clutch Assembly - 650cc Unit Models Circa 1963-72 Complete three spring / six plate 58 tooth duplex chain clutch assembly. Suitable for...

Quantity:

+ −

CODE: clutch1935

Triumph Compete 3 Spring Clutch Assembly - Unit 350/500cc Models Circa 1964-74

£354.95 (£425.94 inc VAT)

OEM: 57-1935, T1935

Triumph Compete 3 Spring Clutch Assembly - Unit 350/500cc Models Circa 1964-74 Complete three spring / six plate 58 tooth duplex chain clutch assembly....

Quantity:

+ −

CODE: clutch4435-B23

Triumph / BSA Complete Clutch Centre / Shock Absorber Assembly - Unit Twins - Three Spring Clutch

£119.95 (£143.94 inc VAT)

OEM: 57-4435, T4435

Triumph / BSA Complete Clutch Centre / Shock Absorber Assembly - Unit Twins - Three Spring Clutch Correct fitment on later T120, all T140 and TR7 models....

Quantity:

+ −

CODE: clutch4435-early-B23

Triumph / BSA Early Type Complete Clutch Centre / Shock Absorber Assembly - 350/500/650cc Unit Twins

£119.95 (£143.94 inc VAT)

OEM: 57-1719, 68-3275

Triumph / BSA Early Type Complete Clutch Centre / Shock Absorber Assembly - 350/500/650cc Unit Twins Early type clutch centre with countersunk screws...

Quantity:

+ −

CODE: clutch2773-B25

BSA Triplex 3 Spring Clutch Chainwheel - 58T - A50/A65 Models Circa 1966-72

£115.95 (£139.14 inc VAT)

OEM: 68-2773, 68-3272, 57-2773

BSA Triplex 3 Spring Clutch Chainwheel - 58T - A50/A65 Models Circa 1966-72 Correct fitment on BSA unit 500/650cc models. Triplex primary chain...

Quantity:

+ −

CODE: clutch9906-B23

Triumph Clutch Hub Complete - 4 Spring

£114.95 (£137.94 inc VAT)

Clutch hub complete Shock Assembly Triumph clutch hub centre complete, for unit and pre-unit Triumph This is the complete centre unit, including the...

Quantity:

+ −

CODE: clutch3919-B25

BSA Clutch Chainwheel - 43T, 6 Spring 2 Plate Type - C10/C11 from 1946-53

£114.95 (£137.94 inc VAT)

OEM: 65-3919

BSA Clutch Chainwheel - 43T, 6 Spring 2 Plate Type - C10/C11 from 1946-53 Suitable for BSA Rigid & Spring C10/C11 models from 1946-53 - 3 & 4...

Quantity:

+ −

CODE: clutch3223-B25

BSA/Triumph Clutch Chainwheel - 6 Spring - A10 etc - 42-3223

£109.95 (£131.94 inc VAT)

OEM: 42-3223, 66-3908

BSA/Triumph Clutch Chainwheel - 6 Spring - A10 etc - 42-3223 Includes the friction pieces inset into the base each side. Simply beautiful! Chain Type:...

Quantity:

+ −

57-3709, T3709, 19-7803 - Triumph/BSA Triples Clutch Friction Plate - Surflex

CODE: clplt268-B24

Triumph/BSA Triples Clutch Friction Plate - Surflex - T150, T160, X75, A75

£104.95 (£125.94 inc VAT)

OEM: 57-3709, T3709, 19-7803

Triumph/BSA Triples Clutch Friction Plate - Surflex - T150, T160, X75, A75 Fits all Triumph T150 & T160 Trident, Triumph X75 Hurricane + BSA A75...

Quantity:

+ −

043443, 04-3443 - Norton AMC Clutch Spider

CODE: clutch136

Norton AMC Clutch Spider - OEM: 04-3443

£89.95 (£107.94 inc VAT)

OEM: 04-3443

Norton AMC Clutch Spider Fits Norton, AJS, Matchless Depth of spline 19.16 mm Depth of thread 26.5 mm Outer registers - spline side, 1st 5.36 mm, 2nd...

Quantity:

+ −

Clutch hub centre for Norton, AMC, AJS, Matchless 040366, 04-0366

CODE: clutch002-B23

Clutch Hub Centre - Norton, AMC, AJS, Matchless

£87.95 (£105.54 inc VAT)

OEM: 04-0366

Clutch hub centre for Norton, AMC, AJS, Matchless OEM: 040366, 04-0366

Quantity:

+ −

CODE: clplt-set-M20-B24

BSA Clutch Plate Set - M Group Single Spring Clutch Models

£69.95 (£83.94 inc VAT)

OEM: 15-2419, 15-4307, 66-3812

BSA Clutch Plate Set - M Group Single Spring Clutch Models Full set of 8 clutch friction rings + 4 driving steel plates + 3 driven steel plates....

Quantity:

+ −

CODE: clutch3235-B23

BSA 4 Spring Clutch Hub Centre - A and B Group Models Circa 1960-63

£57.95 (£69.54 inc VAT)

OEM: 42-3235

BSA 4 Spring Clutch Hub Centre - A and B Group Models Circa 1960-63 For use with a 4 spring non cush drive clutch, standard fit on later A7 and A10...

Quantity:

+ −

060770, 06-0770 - Norton Commando Clutch Diaphragm Spring Plate

CODE: clutch0770-B23

Norton Commando Clutch Diaphragm Spring Plate - 060770

£55.95 (£67.14 inc VAT)

OEM: 060770, 06-0770

Norton Commando Clutch Diaphragm Spring Plate - 060770 Clutch diaphragm pressure plate as used on all Norton Commando models. OD: 6+5/16" (160mm) ID:...

Quantity:

+ −

CODE: clutch468-B20

Triumph Clutch Chainwheel - 5TA, T100, T110, 6T, T120, TR6 From 1960-74

£52.95 (£63.54 inc VAT)

OEM: 57-1570

Triumph Clutch Chainwheel - 5TA, T100, T110, 6T, T120, TR6 From 1960-74 Number of Teeth: 58T Chain Type: Duplex OEM: 57-1570, T1570

Quantity:

+ −

CODE: clutch469-B20

Triumph T140, TR7 (1973-80) Clutch Chainwheel

£49.95 (£59.94 inc VAT)

OEM: 57-4640

Triumph T140, TR7 (1973-80) Clutch Chainwheel 58 Teeth Triplex OEM: 57-4640, T4640

Quantity:

+ −

CODE: hub3170A-B23

BSA 4 Spring Clutch Hub Adaptor - Large Taper - A and B Group Models Circa 1954-63

£49.95 (£59.94 inc VAT)

OEM: 42-3170A

BSA 4 Spring Clutch Hub Adaptor - Large Taper - A and B Group Models Circa 1954-63 Clutch sleeve that fits on the gearbox shaft, and holds the clutch...

Quantity:

+ −

CODE: clutch001-B25

BSA/Triumph Clutch Chainwheel - All Unit Singles - B25, B40, B44, B50, C15 and TR25W

£91.95 (£110.34 inc VAT)

OEM: 57-4198, 40-3203, 47-3214

BSA/Triumph Clutch Chainwheel - All Unit Singles - B25, B40, B44, B50, C15 and TR25W Clutch chainwheel for BSA unit singles circa 1959-70 + Triumph TR25W....

Select Options

OEM: 57-1549, 42-3266, 57-0985, T985, T1549

CODE: clutch475t-B20

Triumph Pre-Unit 500/650cc Clutch Chainwheel

£43.95 (£52.74 inc VAT)

OEM: 57-1549, 42-3266

Triumph Pre-Unit 500/650cc Clutch Chainwheel Number of Teeth: 43T Chain Type: Single OEM: 57-1549, 42-3266, 57-0985, T985, T1549

Quantity:

+ −

CODE: clutch475b-B20

BSA Clutch Chainwheel A and B Models

£43.95 (£52.74 inc VAT)

OEM: 57-1549, 42-3266

BSA A and B Models with Swing-Arm Clutch Chainwheel (4 Spring) Number of Teeth: 43T Chain Type: Single OEM: 57-1549, 42-3266

Quantity:

+ −

57-1539, T1539 - Triumph Clutch Operating Lever - Pre Unit 500/650cc Models Circa 1959-62

CODE: clutch1539-B23

Triumph Clutch Operating Lever - Pre Unit 650cc Models Circa 1959-62

£42.95 (£51.54 inc VAT)

OEM: 57-1539, T1539

Triumph Clutch Operating Lever - Pre Unit 500/650cc Models Circa 1959-62 Horizontal type clutch operating arm - cable to gearbox. Correct fitment on later...

Quantity:

+ −

CODE: hub3170-B23

BSA 4 Spring Clutch Hub Adaptor - Standard Taper - A and B Group Models Circa 1954-63

£39.95 (£47.94 inc VAT)

OEM: 42-3170

BSA 4 Spring Clutch Hub Adaptor - Standard Taper - A and B Group Models Circa 1954-63 Clutch sleeve that fits on the gearbox shaft, and holds the clutch...

Quantity:

+ −

CODE: clutch309-B23

Burman Clutch Hub - Panther Heavyweight Singles - 5 Plate With Studs

£38.95 (£46.74 inc VAT)

OEM: 3355-96, M726

Burman Clutch Hub - Panther Heavyweight Singles - 5 Plate With Studs ID: 4+1/16" (103.1mm) Basket depth: 1+1/16" (26.9mm) Centre ID: 1+3/16" (30.5mm)...

Quantity:

+ −

CODE: clutchhub-310-B23

Burman, AJS, Matchless Clutch Hub - G37-3

£38.95 (£46.74 inc VAT)

OEM: G37-3

Clutch hub for the AJS, Matchless Heavyweight singles, 350cc, 500cc Burman 5 plate clutch hub Burman, AJS, Matchless Clutch Centre 5 plate for AMC...

Quantity:

+ −

CODE: clutch3355-36-B23

Burman Clutch Centre - Ariel 350cc Singles Circa 1936-47 - 2 Friction Plates

£38.95 (£46.74 inc VAT)

OEM: 3355-36

Burman Clutch Centre - Ariel 350cc Singles Circa 1936-47 - 2 Friction Plates Clutch hub / centre with no boss suitable for early civilian NG and NH...

Quantity:

+ −

CODE: clutch345H-B23

Clutch Hub Centre - Triumph TRW 500, 5T, 3TA - 4 Plate Shock Absorber Type

£37.95 (£45.54 inc VAT)

OEM: 57-1037

Clutch Hub Centre - Triumph TRW 500, 5T, 3TA - 4 Plate Shock Absorber Type OEM: 57-1037

Quantity:

+ −

CODE: hub3929-B23

Triumph/BSA Clutch Hub Sleeve - 650/750cc Unit Twins From 1963 Onwards

£37.95 (£45.54 inc VAT)

OEM: 57-3929, 68-3277, 57-1734, T1734, T418, 57-0418

Triumph/BSA Clutch Hub Sleeve - 650/750cc Unit Twins From 1963 Onwards This is the clutch sleeve that fits on the gearbox shaft, and holds the clutch...

Quantity:

+ −

CODE: clutch1041-B23

Triumph 4 Paddle Clutch Spider - Pre Unit Models From 1953 Onwards + Unit 350/500cc Twins Circa 1958-63

£36.95 (£44.34 inc VAT)

OEM: 57-1041, T1041

Triumph 4 Paddle Clutch Spider - Pre Unit Models From 1953 Onwards + Unit 350/500cc Twins Circa 1958-63 Clutch shock absorber spider suitable for models...

Quantity:

+ −

CODE: clutch357-B23

Triumph/BSA Billet Alloy Clutch Pressure Plate - 3 Spring - 3/8" Threaded Adjuster

£35.95 (£43.14 inc VAT)

OEM: 57-2156, T2156, 57-4590, T4590, 68-3305

Triumph/BSA Billet Alloy Clutch Pressure Plate - 3 Spring - 3/8" Threaded Adjuster Correct fitment on 500/650/750cc twins from 1966 onwards including...

Quantity:

+ −

040365, 04-0365 - Norton/AMC Clutch Pressure Plate - 3 Spring

CODE: clutch128B

Norton/AMC Clutch Pressure Plate - 3 Spring - Singles and Lightweights

£35.95 (£43.14 inc VAT)

OEM: 040365, 04-0365

Norton/AMC Clutch Pressure Plate - 3 Spring - Singles & Lightweights AJS, Matchless, Norton clutch pressure plate to hold three clutch springs....

Quantity:

+ −

CODE: clutch1925-B23

Triumph T20 Tiger Cub Billet Alloy Clutch Pressure Plate - Later Models From 1964 Onwards

£35.95 (£43.14 inc VAT)

OEM: 57-1925, T1925

Triumph T20 Tiger Cub Billet Alloy Clutch Pressure Plate - Later Models From 1964 Onwards Clutch pressure plate CNC manufactured in lightweight billet...

Quantity:

+ −

CODE: hub3930-B23

Triumph Clutch Hub Sleeve - Unit 350/500cc Models From 1959 Onwards

£34.50 (£41.40 inc VAT)

OEM: 57-3930, T3930, 57-1751, 57-1386, T1386, T1751

Triumph Clutch Hub Sleeve - Unit 350/500cc Models From 1959 Onwards This is the clutch sleeve that fits on the gearbox shaft, and holds the clutch hub....

Quantity:

+ −

CODE: clutch356-B23

Triumph/BSA 4 Spring Billet Alloy Clutch Pressure Plate - Threaded Adjuster Type

£32.95 (£39.54 inc VAT)

OEM: 57-1466, 57-1466A, T1466

Triumph/BSA 4 Spring Billet Alloy Clutch Pressure Plate - Threaded Adjuster Type Suitable for many pre unit Triumph models - 3T, 5T, T100, TR5, 6T, T110,...

Quantity:

+ −

CODE: clutch355-B23

Triumph/BSA 4 Spring Billet Alloy Clutch Pressure Plate With Thrust Button

£32.95 (£39.54 inc VAT)

OEM: 42-3173, 42-3173A, 57-0986, T986

Triumph/BSA 4 Spring Billet Alloy Clutch Pressure Plate With Thrust Button Suitable for many pre unit Triumph models - 3T, 5T, T100, TR5, 6T, T110, TR6...

Quantity:

+ −

G40-7, 3360-36, 3360-85, C24AS - Clutch Friction Plates - Burman, Ariel, Panther, Vincent - Surflex

CODE: clplt337S-B24

Clutch Friction Plates - Burman, Ariel, Panther, Vincent - Standard or Surflex

£31.95 (£38.34 inc VAT)

OEM: G40-7, 3360-36, 3360-85, C24AS

Clutch Friction Plates - Burman, Ariel, Panther, Vincent - Standard or Surflex Inside Diameter: 115mm Outside Diameter: 174mm Stub Length: 7.4mm...

Options

063741, 06-3741 - Norton Commando Sintered Bronze Clutch Plate

CODE: clplt344-B24

Norton Commando Sintered Bronze Clutch Plate - 750/850cc Models - Surflex

£31.95 (£38.34 inc VAT)

OEM: 063741, 06-3741

Norton Commando Sintered Bronze Clutch Plate - 750/850cc Models - Surflex To fit 750/850cc later models - high torque type Inside Diameter excluding...

Quantity:

+ −

CODE: clutch8310-B18

BSA Primary Chain Tensioner Blade - A50 and A65 Models

£26.95 (£32.34 inc VAT)

OEM: 70-8310, 68-0244

BSA Primary Chain Tensioner Blade - A50 and A65 Models Primary chain tensioner blade suitable for BSA unit twins. For Triplex chains - see related...

Quantity:

+ −

CODE: clutch0986H-B23

Triumph/BSA 4 Spring Steel Clutch Pressure Plate - Thrust Button Type

£25.95 (£31.14 inc VAT)

OEM: 57-0986, 42-3173, T986

Triumph/BSA 4 Spring Steel Clutch Pressure Plate - Thrust Button Type As used on many pre unit Triumph models - 3T, 5T, T100, TR5, 6T, T110, TR6 and...

Quantity:

+ −

CODE: clutch3911-B18

BSA Clutch Inner Bearing Race - 6 Spring Clutch - A Group Swinging Arm + B/C/M Group Models

£22.95 (£27.54 inc VAT)

OEM: 65-3911

BSA Clutch Inner Bearing Race - 6 Spring Clutch - A Group Swinging Arm + B/C/M Group Models Clutch inner bearing twin track race with two grooves. OD:...

Quantity:

+ −

CODE: clutch1466H-B23

Triumph/BSA 4 Spring Clutch Pressure Plate With Threaded Adjuster Pin and Nut

£20.95 (£25.14 inc VAT)

OEM: 57-1466, T1466, 68-3226, 57-1256, T1256, 40-3230, GS662, 02-2395

Triumph/BSA 4 Spring Clutch Pressure Plate With Threaded Adjuster Pin and Nut Supplied as a complete assembly with threaded adjuster pin and nut. Correct...

Quantity:

+ −

CODE: clplt0296-B24

BSA Steel Clutch Driven Plate - Pre War Single Spring Models Circa 1914-37

£19.95 (£23.94 inc VAT)

OEM: 15-0296, 15-296

BSA Steel Clutch Driven Plate - Pre War Single Spring Models Circa 1914-37 Dished single spring clutch driven plate - 6 inner stubs. Suitable for many...

Quantity:

+ −

CODE: clplt326-B24

Norton Singles and Twins (-1959) - Clutch Friction Plates - Surflex - OEM: 02-3930

£18.95 (£22.74 inc VAT)

OEM: 02-3930

Norton Singles and Twins (-1959) - Clutch Steel Plates Inside Diameter: 96mm Outside Diameter: 150mm, including stubs: 154mm These are 5mm thick OEM:...

Quantity:

+ −

CODE: bear3717

Triumph Inner Clutch Thrust Bearing - T150 and T160 Trident Models

£18.95 (£22.74 inc VAT)

OEM: 57-3717, T3717, 76168

Triumph Inner Clutch Thrust Bearing - T150 and T160 Trident Models Clutch pull rod thrust bearing as used on all 750cc triples from 1968 onwards....

Quantity:

+ −

CODE: clplt331-B24

Norton Singles and Twins - Single Sided Clutch Friction Plates - Surflex - OEM: 04-3193

£16.95 (£20.34 inc VAT)

OEM: 04-3193

Norton Singles and Twins - Clutch Friction Plates Single sided internal spline 500, 600, 650, 750 singles & twins, internal spline. Inside Diameter:...

Quantity:

+ −

CODE: clutch3787-B18

BSA Clutch Centre Nut - A, B and M Models Fitted with a 6 Spring Clutch

£16.95 (£20.34 inc VAT)

OEM: 66-3787

BSA Clutch Centre Nut - A, B and M Models Fitted with a 6 Spring Clutch Correct fitment for the following: A Group Swinging Arm models B Group - All...

Quantity:

+ −

CODE: clutch2715-B23

Triumph/BSA Clutch Spider - Unit Singles - C15, B Group + TR25W

£16.95 (£20.34 inc VAT)

OEM: 57-2715, T2715, 41-3209

Triumph/BSA Clutch Spider - Unit Singles - C15, B Group + TR25W C15, B25, B40, B44, B50 and Triumph TR25W models. OEM: 57-2715, T2715, 41-3209

Quantity:

+ −

CODE: clutch3222-B23

Triumph/BSA Clutch Pressure Plate - 4 Spring - TR25W, C15, B40 + Early C25/B25 Models

£16.95 (£20.34 inc VAT)

OEM: 40-3222, 57-2728, T2728

Triumph/BSA Clutch Pressure Plate - 4 Spring - TR25W, C15, B40 + Early C25/B25 Models Steel clutch pressure plate for use with a 1/4" 26 TPI BSF push rod...

Quantity:

+ −

CODE: clutch7033-B18

Triumph Clutch Operating Lever / Lifter Assembly - 650/750cc Unit Twins Circa 1968-85

£16.95 (£20.34 inc VAT)

OEM: 57-7033, 57-3629, 57-4587, 58-0001

Triumph Clutch Operating Lever / Lifter Assembly - 650/750cc Unit Twins Circa 1968-85 Complete ready to fit clutch lever assembly, includes: clutch lever,...

Quantity:

+ −

CODE: clplt322-B24

BSA A7, A10 Swing Arm Models, B Models - Clutch Friction Plates - Surflex

£15.95 (£19.14 inc VAT)

OEM: 42-3119, 65-3857

BSA A7, A10 Swing Arm Models, and B models - Surflex Clutch Friction Plates Surflex 18-M-13 Inside Diameter: 106mm Outside Diameter: 153mm Stub Length:...

Quantity:

+ −

CODE: gear3257-B23

BSA A50/A65 Clutch Cable Connector Assembly - Circa 1962-72

£15.95 (£19.14 inc VAT)

OEM: 68-3257

BSA A50/A65 Clutch Cable Connector Assembly - Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable abutment to connect...

Quantity:

+ −

CODE: clutch3872-B23

BSA Clutch Back Plate - 6 Spring A, B, C and M Group Models - Circa 1946-62

£15.95 (£19.14 inc VAT)

OEM: 65-3872

BSA Clutch Back Plate - 6 Spring A, B, C and M Group Models - Circa 1946-62 Correct fitment on all BSA models fitted with a six spring clutch - A7, A10,...

Quantity:

+ −

CODE: clplt328t-B24

Triumph 350/500/650/750 Clutch Friction Plates - Surflex

£15.95 (£19.14 inc VAT)

OEM: 57-1362, 68-3267, T414, 57-0414

Triumph 350/500/650/750 Clutch Friction Plates - Surflex Surflex Plate Inside Diameter: 106mm Outside Diameter: 155mm Stub Length: 6mm OEM: 57-1362, 68-3267,...

Quantity:

+ −

CODE: clplt328b-B24

BSA A50, A65 Clutch Friction Plates - Surflex

£15.95 (£19.14 inc VAT)

OEM: 57-1362, 68-3267, 42-3262, 42-3192

BSA A50, A65 Clutch Friction Plates - Surflex Also some BSA A10, B31, B32, B33, B34, A7 models with 4 spring clutch Surflex Plate Inside Diameter: 106mm...

Quantity:

+ −

CODE: clplt327S-B24

Triumph T20 Tiger Cub Clutch Friction/Driving Plate - 1959 Onwards

£14.95 (£17.94 inc VAT)

OEM: T1503, 57-1503

Triumph T20 Tiger Cub Clutch Friction/Driving Plate - 1959 Onwards Clutch driving plate complete with linings as used on l ater T20 Tiger Cub models...

Options

CODE: clplt339-B24

Norton 350, 500, 650 singles - Clutch Friction Plates - Surflex

£14.95 (£17.94 inc VAT)

Norton 350, 500, 650 singles - Clutch Friction Plates. Surflex Plate Inside Diameter: 90mm(between stubs) Outside Diameter: 148mm These are 4.7mm thick,...

Quantity:

+ −

57-4590, 57-2156, 68-3305 - Triumph Clutch Pressure Plate - 3 Spring

CODE: clutch4590-B23

Triumph/BSA Steel Clutch Pressure Plate - 3 Spring - 3/8" Threaded Adjuster

£14.95 (£17.94 inc VAT)

OEM: 57-4590, T4590, 57-2156, T2156, 68-3305

Triumph/BSA Steel Clutch Pressure Plate - 3 Spring - 3/8" Threaded Adjuster Correct fitment on 500/650/750cc twins from 1966 onwards including T100, T120,...

Quantity:

+ −

CODE: clplt321-B24

BSA A7, A10 Plunger Models - Clutch Friction Plates - Surflex

£13.95 (£16.74 inc VAT)

OEM: 67-3242, 29-3476

BSA A7, A10, B31, B33, C10L, C11G, C12 Plunger Models Surflex Clutch Friction Plates Surflex - 18-M-12 Inside Diameter: 92mm Outside Diameter: 144mm...

Quantity:

+ −

CODE: clplt323-B24

BSA Bantam Clutch friction plate (Surflex)

£12.95 (£15.54 inc VAT)

OEM: 90-1318

BSA Bantam Clutch friction plate (Surflex) Made in Italy by Surflex 33mm across splines 97mm diameter OEM: 90-1318

Quantity:

+ −

CODE: clutch3910-B18

BSA Clutch Inner Bearing Race Balls & Cages - All Models Fitted with a 6 Spring Clutch

£12.95 (£15.54 inc VAT)

OEM: 65-3910

BSA Clutch Inner Bearing Race Balls & Cages - All Models Fitted with a 6 Spring Clutch Clutch bearing set of inner bearing race with ball bearings...

Quantity:

+ −

CODE: clutch6283-B18

Triumph Primary Chain Tensioner Blade - 350/500cc Unit Twins Circa 1961-74

£12.95 (£15.54 inc VAT)

OEM: 70-6283, E6283

Triumph Primary Chain Tensioner Blade - 350/500cc Unit Twins Circa 1961-74 Primary chain tensioner blade suitable for 3TA, T90, 5TA and T100 models. For...

Quantity:

+ −

CODE: clplt336-B24

Clutch Steel Plates - BSA A7, A10 Swing Arm Models + B Models

£11.95 (£14.34 inc VAT)

OEM: 29-3832, 65-3824

Clutch Steel Plates - BSA A7, A10 Swing Arm Models + B Models Surflex 18-M-14 Inside Diameter: 88mm (between stubs) Outside Diameter: 147mm Stub...

Quantity:

+ −

CODE: clplt325-B24

Villiers Clutch Friction Plates - Surflex

£10.95 (£13.14 inc VAT)

OEM: E8349/2

Villiers 9E, 10E and 32A Clutch Friction Plates - Surflex. Single cylinder models Surflex Plate Inside Diameter: 67mm Outside Diameter: 114mm Stub...

Quantity:

+ −

CODE: clutch4312-B18

BSA Clutch Spring Retaining Nut - M20, M21 and M33 Single Spring Clutch Models

£10.95 (£13.14 inc VAT)

OEM: 15-4312

BSA Clutch Spring Retaining Nut - M20, M21 and M33 Single Spring Clutch Models Locates over the mainshaft nut to secure the central clutch spring. Correct...

Quantity:

+ −

15-2419 - BSA M20, M21 - Clutch Friction Plates

CODE: clplt490-B24

BSA M20, M21 - Clutch Friction Plates - Surflex - OEM: 15-2419

£9.95 (£11.94 inc VAT)

OEM: 15-2419

BSA M20, M21 - Clutch Friction Plates Fits BSA Empire Star and M20 models (-1947) with single spring clutch Inside Diameter: 90.5mm Outside Diameter:...

Quantity:

+ −

CODE: clutch3643-B23

Triumph/BSA Clutch Shaft Needle Roller Bearing - T150, T160 and A75 Models

£9.95 (£11.94 inc VAT)

OEM: 57-3643, T3643

Triumph/BSA Clutch Shaft Needle Roller Bearing - T150, T160 and A75 Models Clutch shaft / hub needle race bearing as used on all 750cc triples from 1968...

Quantity:

+ −

CODE: clplt322p-B24

BSA Single & Twin Cylinder Swing Arm Models, A and B models - Non Surflex Clutch Friction Plates

£9.45 (£11.34 inc VAT)

OEM: 42-3119, 65-3857

BSA Single & Twin Cylinder Swing Arm Models, A and B models - Non Surflex Clutch Friction Plates Inside Diameter: 106mm Outside Diameter: 153mm Stub...

Quantity:

+ −

CODE: clplt330P-B24

Burman Clutch Friction Plates - AJS / Matchless Singles and Twins Circa 1951-56

£9.45 (£11.34 inc VAT)

OEM: G-40-6, G-40-12

Burman Clutch Friction Plates - AJS / Matchless Singles and Twins Circa 1951-56 Clutch driving / friction plate with inserts - four or five required...

Quantity:

+ −

CODE: fkclutch218-B23

Tension Blade - Triumph - OEM: 70-5085

£8.95 (£10.74 inc VAT)

OEM: 70-5085

TENSION BLADE - Triumph Triumph T140 primary chain tensioner blade. For Triplex Chain Chain Slipper, tensioner. OEM: 70-5085

Quantity:

+ −

CODE: clutch6061-B18

Triumph 500/650cc Duplex Chain Tensioner Blade - 70-6061

£8.95 (£10.74 inc VAT)

OEM: 70-6061, E4149, 70-4149, E6061

Triumph 650cc Duplex Chain Tensioner Blade - 70-6061 Also suitable for 350/500cc models Triumph Twins, primary chain tensioner blade. For duplex chains....

Quantity:

+ −

CODE: clutch1552S-B23

Triumph Clutch Operating / Push Rod - Pre Unit Models With 5 Plate Clutch Circa 1950-62

£8.95 (£10.74 inc VAT)

OEM: 57-1552, 57-0455B, T1552, T455B

Triumph Clutch Operating / Push Rod - Pre Unit Models With 5 Plate Clutch Circa 1950-62 Hardened steel clutch operating rod - correct fitment on pre unit...

Options

CODE: clutch3274

BSA 12" Clutch Push Rod - 4 Spring Clutch - A10 Super Rocket and RGS Models + Conversions

£8.95 (£10.74 inc VAT)

OEM: 42-3274

BSA 12" Clutch Push Rod - 4 Spring Clutch - A10 Super Rocket and RGS Models + Conversions Hardened steel clutch operating rod - correct fitment on A10 SR...

Quantity:

+ −

57-0455, 57-1551, T455, T1551 - Triumph 12" Clutch Push Rod - Pre Unit Models With 4 Plate Clutch - Circa 1946-58

CODE: clutch0455

Triumph 12" Clutch Push Rod - 500cc Pre Unit Models With 4 Plate Clutch - Circa 1946-58

£8.95 (£10.74 inc VAT)

OEM: 57-0455, 57-1551, T455, T1551

Triumph 12" Clutch Push Rod - Pre Unit Models With 4 Plate Clutch - Circa 1946-58 Hardened steel clutch operating rod - correct fitment on pre unit 5T,...

Quantity:

+ −

CODE: clplt272t-B24

Triumph 350/500/650/750 Clutch Friction Plates

£8.95 (£10.74 inc VAT)

OEM: 57-1362, 68-3267, T1362, T414, 57-0414, 57-4763, T4763

Triumph 350/500/650/750 Clutch Friction Plates (3 & 4 Spring Clutch) Inside Diameter: 106mm Outside Diameter: 155mm Stub Length: 6mm OEM: 57-1362,...

Quantity:

+ −

CODE: clplt272b-B24

BSA A50, A65, A7, A10 Clutch Friction Plates

£8.95 (£10.74 inc VAT)

OEM: 57-1362, 68-3267, 42-3262

BSA A50, A65 Clutch Friction Plates (4 Spring Clutch) Also some BSA A7/A10 models with 4 spring clutch Inside Diameter: 106mm Outside Diameter: 155mm Stub...

Quantity:

+ −

CODE: clutch3234-B23

BSA / Triumph Clutch Centre Retaining Nut Distance Piece - Unit Singles Circa 1959-73

£8.95 (£10.74 inc VAT)

OEM: 40-3234, 57-2731, T2731

BSA / Triumph Clutch Centre Retaining Nut Distance Piece - Unit Singles Circa 1959-73 Clutch spacer washer - locates behind the mainshaft nut and lock...

Quantity:

+ −

CODE: clplt333-B24

Steel Clutch Plates - Burman, Ariel, Panther, Vincent - Surflex

£8.45 (£10.14 inc VAT)

OEM: 3370-36

Steel Clutch Plates - Burman, Ariel, Panther, Vincent - Surflex Inside Diameter: 109mm(between stubs) Outside Diameter: 170mm Stub Length: 6mm Made by...

Quantity:

+ −

CODE: clplt335-B24

BSA, AJS, Matchless, Ariel, Panther, Vincent - Clutch Steel Plates - OEM: 67-3240

£6.45 (£7.74 inc VAT)

OEM: 67-3240, G-39-4

BSA, AJS, Matchless, Ariel, Panther, Vincent - Clutch Steel Plates Plain steel clutch plate - available as 0.03" (0.82mm), 0.08" (2mm) and 0.09" (2.41mm)...

Select Options

CODE: clplt329-B24

BSA, Ariel, Panther, Vincent Clutch Steel Plates - Surflex - OEM: 67-3241

£7.95 (£9.54 inc VAT)

OEM: 67-3241

BSA, Ariel, Panther, Vincent Clutch Steel Plates - Surflex Fits Ariel Colt 200cc BSA C10L, C11G, C12 models (1954-58) A7, A10 Plunger models (1950-57)...

Quantity:

+ −

CODE: clplt332-B24

Norton Singles and Twins (-1959) - Clutch Steel Plates - Surflex -OEM: 02-3931

£7.95 (£9.54 inc VAT)

OEM: 02-3931

Norton Singles and Twins (-1959) - Clutch Steel Plates. Surflex Plate Inside Diameter: 90mm (between stubs) Outside Diameter: 148mm Stub Length: 7.2mm...

Quantity:

+ −

04-3442, 04-3192 - Norton Single & Twins (1959 onwards) - Clutch Friction Plates

CODE: clplt338P-B24

Norton (1959-) - Clutch Friction Plates - OEM: 04-3442

£7.95 (£9.54 inc VAT)

OEM: 04-3442, 04-3192

Norton Single & Twins (1959 onwards) - Clutch Friction Plates Inside Diameter: 90mm (between stubs) Outside Diameter: 148mm Stub Length: 9.8mm...

Options

CODE: clplt341-B24

Norton 1960 on, Late AMC - Clutch Steel Plates - Surflex

£7.95 (£9.54 inc VAT)

Norton 1960 on, Late AMC - Clutch Friction Plates. Surflex Plate Inside Diameter: 90mm(between stubs) Outside Diameter: 148mm Stub Length: 9.8mm Made in...

Quantity:

+ −

CODE: clutch139-B23

Clutch Cush Rubbers Norton and AMC Models - set of 6

£7.95 (£9.54 inc VAT)

OEM: 04-0386, 04-0387

Norton/AMC clutch cush drive rubber set Set of 6 cush drive rubbers rubbers - three large and three small. OEM: 04-0386, 04-0387 Made in England

Quantity:

+ −

CODE: clutch104-B23

BSA Bantam Clutch Thrust Bearing - 90-1717

£7.95 (£9.54 inc VAT)

OEM: 90-1717

BSA Bantam Clutch Thrust Bearing - 90-1717 Needle bearing used in the clutch OEM: 90-1717

Quantity:

+ −

CODE: clutch3259-E12

BSA Clutch Cable Abutment - A50/A65 Models Circa 1962-72

£7.95 (£9.54 inc VAT)

OEM: 68-3259

BSA Clutch Cable Abutment - A50/A65 Models Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable connector assembly to...

Quantity:

+ −

CODE: clplt340-T-B24

Triumph 350/500/650/750 Clutch Steel Plates - Surflex

£7.95 (£9.54 inc VAT)

OEM: 57-1363

Triumph 350/500/650/750 Clutch Steel Plates - Surflex Surflex Plate Inside Diameter: 98mm (between stubs) Outside Diameter: 150mm Stub Length: 6mm OEM:...

Quantity:

+ −

CODE: clplt340-B-B24

BSA A50, A65 Clutch Steel Plates - Surflex

£7.95 (£9.54 inc VAT)

OEM: 57-1363, 42-3195

BSA A50, A65 Clutch Steel Plates - Surflex Surflex Plate Inside Diameter: 98mm (between stubs) Outside Diameter: 150mm Stub Length: 6mm OEM: 57-1363,...

Quantity:

+ −

CODE: clutch3646-B23

Triumph/BSA Clutch Needle Roller Thrust Washer - T150, T160 and A75 Models

£7.95 (£9.54 inc VAT)

OEM: 57-3646, T3646

Triumph/BSA Clutch Needle Roller Thrust Washer - T150, T160 and A75 Models Clutch thrust race as used on all 750cc triples from 1968 onwards. Locates...

Quantity:

+ −

CODE: clplt264-B24

BSA Bantam Clutch friction plate (non Surflex)

£7.45 (£8.94 inc VAT)

OEM: 90-1318

BSA Bantam Clutch friction plate (non Surflex) 33mm across splines 97mm diameter OEM: 90-1318

Quantity:

+ −

CODE: clplt1315-B24

Triumph T20 Tiger Cub Clutch Driven/Steel Plate - All Models From 1954 Onwards

£7.45 (£8.94 inc VAT)

OEM: 57-1315, T1315

Triumph T20 Tiger Cub Clutch Driven/Steel Plate - All Models From 1954 Onwards Plain steel driven plate as used on all T15 Terrier and T20 Tiger Cub...

Quantity:

+ −

CODE: clplt272At-B24

Triumph 350/500/650/750 Clutch Friction Plates - Aluminium

£7.45 (£8.94 inc VAT)

OEM: 57-1362A, 68-3267, T414, 57-0414, 57-4763, T4763

Triumph 350/500/650/750 Clutch Friction Plates - Made in Aluminium (lighter in weight) (3 & 4 Spring Clutch) Inside Diameter: 106mm Outside Diameter:...

Quantity:

+ −

CODE: clplt272Ab-B24

BSA A50, A65, A10, A7 Clutch Friction Plates - Aluminium

£7.45 (£8.94 inc VAT)

OEM: 57-1362A, 68-3267, 42-3262

BSA A50, A65 Clutch Friction Plates - Made in Aluminium (lighter in weight) Also some BSA A7/A10 models with 4 spring clutch (4 Spring Clutch) Inside...

Quantity:

+ −

CODE: clutch2215-B23

Triumph Outer Clutch Thrust Washer - T150 and T160 Trident Models

£7.45 (£8.94 inc VAT)

OEM: 57-2215, T2215

Triumph Outer Clutch Thrust Washer - T150 and T160 Trident Models Clutch shaft outer thrust washer as used on 750cc triples. Locates within the outer...

Quantity:

+ −

OEM: 57-7035, T7035, 57-4589, T4589, 57-1711, 57-3761, T1711, T3761

CODE: clutch7035-B18

Triumph Clutch Operating Actuator Thrust Plate - 650/750 Unit Twins

£6.95 (£8.34 inc VAT)

OEM: 57-7035, T7035, 57-4589, T4589, 57-1711, 57-3761, T1711, T3761

Triumph Clutch Operating Actuator Thrust Plate - 650/750 Unit Twins Suits Triumph T120, T140 from 1972-78 with 3 Ball Clutch Lever Arm OD: 1+13/16" (46mm)...

Quantity:

+ −

66-3812, 18-M-2 - BSA M Group Steel Clutch Plates - Single Spring Clutch - 1937-58

CODE: clplt3812-B24

BSA M Group Steel Clutch Driving Plate - Single Spring Clutch - 1937-58

£6.95 (£8.34 inc VAT)

OEM: 66-3812, 18-M-2

BSA M Group Steel Clutch Driving Plate - Single Spring Clutch - 1937-58 BSA M Group models - M20, M21, M21AA, M22, M23 Empire Star. Single spring clutch...

Quantity:

+ −

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Clutch

Account Details

Quick Links

Feked.com

Feked Online