.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Clutch

clutch4903-B23
£354.95 (£425.94 inc VAT)
OEM: 57-4903, T4903, 57-7056, T7056
Triumph Complete Clutch Assembly - T140 and TR7 Models Circa 1973-83 Complete clutch assembly - 58 tooth triplex chain clutch sprocket/basket - 6 plate, 3...
+

clutch1933
£354.95 (£425.94 inc VAT)
OEM: 57-1933, T1933
Triumph Compete 5 Plate Clutch Assembly - 3TA Models Circa 1964-66 Correct fitment on later 3TA models from 1964-66. Supplied as a complete assembly...
+

clutch1928
£354.95 (£425.94 inc VAT)
OEM: 57-1928, T1928
Triumph Compete Clutch Assembly - 650cc Unit Models Circa 1963-72 Complete three spring / six plate 58 tooth duplex chain clutch assembly. Suitable for...
+

clutch1935
£354.95 (£425.94 inc VAT)
OEM: 57-1935, T1935
Triumph Compete 3 Spring Clutch Assembly - Unit 350/500cc Models Circa 1964-74 Complete three spring / six plate 58 tooth duplex chain clutch assembly....
+

clutch4435-B23
£119.95 (£143.94 inc VAT)
OEM: 57-4435, T4435
Triumph / BSA Complete Clutch Centre / Shock Absorber Assembly - Unit Twins - Three Spring Clutch Correct fitment on later T120, all T140 and TR7 models....
+

clutch4435-early-B23
£119.95 (£143.94 inc VAT)
OEM: 57-1719, 68-3275
Triumph / BSA Early Type Complete Clutch Centre / Shock Absorber Assembly - 350/500/650cc Unit Twins Early type clutch centre with countersunk screws...
+

clutch2773-B25
£115.95 (£139.14 inc VAT)
OEM: 68-2773, 68-3272, 57-2773
BSA Triplex 3 Spring Clutch Chainwheel - 58T - A50/A65 Models Circa 1966-72 Correct fitment on BSA unit 500/650cc models. Triplex primary chain...
+

clutch9906-B23
£114.95 (£137.94 inc VAT)
Clutch hub complete Shock Assembly Triumph clutch hub centre complete, for unit and pre-unit Triumph This is the complete centre unit, including the...
+

clutch3919-B25
£114.95 (£137.94 inc VAT)
OEM: 65-3919
BSA Clutch Chainwheel - 43T, 6 Spring 2 Plate Type - C10/C11 from 1946-53 Suitable for BSA Rigid & Spring C10/C11 models from 1946-53 - 3 & 4...
+

clutch3223-B25
£109.95 (£131.94 inc VAT)
OEM: 42-3223, 66-3908
BSA/Triumph Clutch Chainwheel - 6 Spring - A10 etc - 42-3223 Includes the friction pieces inset into the base each side. Simply beautiful! Chain Type:...
+

clplt268-B24
£104.95 (£125.94 inc VAT)
OEM: 57-3709, T3709, 19-7803
Triumph/BSA Triples Clutch Friction Plate - Surflex - T150, T160, X75, A75 Fits all Triumph T150 & T160 Trident,  Triumph X75 Hurricane +  BSA A75...
+

clutch136
£89.95 (£107.94 inc VAT)
OEM: 04-3443
Norton AMC Clutch Spider Fits Norton, AJS, Matchless Depth of spline 19.16 mm Depth of thread 26.5 mm Outer registers - spline side, 1st 5.36 mm, 2nd...
+

clutch002-B23
£87.95 (£105.54 inc VAT)
OEM: 04-0366
Clutch hub centre for Norton, AMC, AJS, Matchless OEM: 040366, 04-0366
+

clplt-set-M20-B24
£69.95 (£83.94 inc VAT)
OEM: 15-2419, 15-4307, 66-3812
BSA Clutch Plate Set - M Group Single Spring Clutch Models Full set of 8 clutch friction rings + 4 driving steel plates + 3 driven steel plates....
+

clutch3235-B23
£57.95 (£69.54 inc VAT)
OEM: 42-3235
BSA 4 Spring Clutch Hub Centre - A and B Group Models Circa 1960-63 For use with a 4 spring non cush drive clutch, standard fit on later A7 and A10...
+

clutch0770-B23
£55.95 (£67.14 inc VAT)
OEM: 060770, 06-0770
Norton Commando Clutch Diaphragm Spring Plate - 060770 Clutch diaphragm pressure plate as used on all Norton Commando models. OD: 6+5/16" (160mm) ID:...
+

clutch468-B20
£52.95 (£63.54 inc VAT)
OEM: 57-1570
Triumph Clutch Chainwheel - 5TA, T100, T110, 6T, T120, TR6 From 1960-74 Number of Teeth: 58T Chain Type: Duplex OEM: 57-1570, T1570
+

clutch469-B20
£49.95 (£59.94 inc VAT)
OEM: 57-4640
Triumph T140, TR7 (1973-80) Clutch Chainwheel 58 Teeth Triplex OEM: 57-4640, T4640
+

hub3170A-B23
£49.95 (£59.94 inc VAT)
OEM: 42-3170A
BSA 4 Spring Clutch Hub Adaptor - Large Taper - A and B Group Models Circa 1954-63 Clutch sleeve that fits on the gearbox shaft, and holds the clutch...
+

clutch001-B25
£91.95 (£110.34 inc VAT)
OEM: 57-4198, 40-3203, 47-3214
BSA/Triumph Clutch Chainwheel - All Unit Singles - B25, B40, B44, B50, C15 and TR25W Clutch chainwheel for BSA unit singles circa 1959-70 + Triumph TR25W....

clutch475t-B20
£43.95 (£52.74 inc VAT)
OEM: 57-1549, 42-3266
Triumph Pre-Unit 500/650cc Clutch Chainwheel Number of Teeth: 43T Chain Type: Single OEM: 57-1549, 42-3266, 57-0985, T985, T1549
+

clutch475b-B20
£43.95 (£52.74 inc VAT)
OEM: 57-1549, 42-3266
BSA A and B Models with Swing-Arm Clutch Chainwheel (4 Spring) Number of Teeth: 43T Chain Type: Single OEM: 57-1549, 42-3266
+

clutch1539-B23
£42.95 (£51.54 inc VAT)
OEM: 57-1539, T1539
Triumph Clutch Operating Lever - Pre Unit 500/650cc Models Circa 1959-62 Horizontal type clutch operating arm - cable to gearbox. Correct fitment on later...
+

hub3170-B23
£39.95 (£47.94 inc VAT)
OEM: 42-3170
BSA 4 Spring Clutch Hub Adaptor - Standard Taper - A and B Group Models Circa 1954-63 Clutch sleeve that fits on the gearbox shaft, and holds the clutch...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.