Engine & Transmission

CODE: pist-JP-ES2

Norton Piston - ES2, Model 18, 500T - Circa 1956-63 - JP

£169.95 (£203.94 inc VAT)

OEM: NM23175, A2-161, A2-164, 19776

Norton Piston - ES2, Model 18, 500T - Circa 1956-63 - JP Supplied as 1 piston, complete with rings, gudgeon pin and circlips. Flat head with valve...

Select Options

CODE: stud2972-B19

Triumph Inlet Manifold Stud - Pre Unit 500cc Models Circa 1952-59 - Long Type

£1.95 (£2.34 inc VAT)

OEM: 70-2972, E2972

Triumph Inlet Manifold Stud - Pre Unit 500cc Models Circa 1952-59 - Long Type Long inlet manifold to cylinder head stud. Correct fitment on pre unit T100...

Quantity:

+ −

CODE: stud2920-B19

Triumph Inlet Manifold Stud - Pre Unit 6T and T110 Models - Circa 1950-62

£1.95 (£2.34 inc VAT)

OEM: 70-2920, E2920

Triumph Inlet Manifold Stud - Pre Unit 6T and T110 Models - Circa 1950-62 Inlet manifold to cylinder head stud. Correct fitment on pre unit 6T models...

Quantity:

+ −

CODE: gbox0057M-B4

Triumph Gear Change Outer Spindle Bush - Pre Unit and Unit Models Circa 1939-75

£10.95 (£13.14 inc VAT)

OEM: 57-4700, T4700, 57-0057, T57

Triumph Gear Change Outer Spindle Bush - Pre Unit and Unit Models Circa 1939-75 New old stock gearchange spindle bush with a chamfered lip. Correct...

Quantity:

+ −

CODE: glev3095-B8

BSA Short Gear Change Lever - C15 Trials and Scrambles Models Circa 1961-64

£42.95 (£51.54 inc VAT)

OEM: 40-3095

BSA Short Gear Change Lever - C15 Trials and Scrambles Models Circa 1961-64 Short gear shift lever with flat serrated foot pedal - correct fitment on C15T...

Quantity:

+ −

CODE: pinion3168-B4

BSA Kickstart Ratchet Pinion - A, B and C Group Models Circa 1951-55

£29.95 (£35.94 inc VAT)

OEM: 67-3168

BSA Kickstart Ratchet Pinion - A, B and C Group Models Circa 1951-55 17T kickstarter pinion as used on A7, A10 models circa 1951-53 + C10, C11 and C11G...

Quantity:

+ −

CODE: pinion3376-B4

BSA Kickstart Ratchet Pinion - A, B and C Group Models Circa 1954-62

£45.95 (£55.14 inc VAT)

OEM: 67-3376

BSA Kickstart Ratchet Pinion - A, B and C Group Models Circa 1954-62 17T kickstarter pinion as used on all A7, A10, C10L and C12 models circa 1954-62....

Quantity:

+ −

CODE: enginestud-6498-B14

Triumph Bottom Engine Mounting Stud - Unit 650cc Models Circa 1963-70

£5.95 (£7.14 inc VAT)

OEM: 82-6498, F6498

Triumph Bottom Engine Mounting Stud - Unit 650cc Models Circa 1963-70 Engine to frame lowwer mounting stud as used on T120 and TR6 models up to 1970....

Quantity:

+ −

06-2583, 40-0148, 68-0289, 40-148, 68-289 - O Ring Nitrile Seal - ID: 1/2", OD: 5/8", Width: 1/16" - Various Applications

CODE: seal0289

O Ring Nitrile Seal - ID: 5/16", OD: 7/16", Width: 1/16" - Various Applications

£0.45 (£0.54 inc VAT)

OEM: 06-2583, 40-0148, 68-0289, 40-148, 68-289

O Ring Nitrile Seal - ID: 1/2", OD: 5/8", Width: 1/16" - Various Applications Various uses on BSA and Norton models including: Oil pump feed gear -...

Quantity:

+ −

CODE: bearing0012-F4

BSA Bantam Gearbox Pinion Sleeve Bearing - All 3 and 4 Speed Models

£2.95 (£3.54 inc VAT)

OEM: 90-0012, 90-12

BSA Bantam Gearbox Pinion Sleeve Bearing - All 3 and 4 Speed Models All Bantam D1, D3, D5, D7, D10, D14 and B175 models. Locates in the left hand /...

Quantity:

+ −

CODE: tappet1493-B13

BSA Inlet / Exhaust Cam Follower Tappet - B Group Circa 1946-60 + M Group Circa 1937-63

£24.95 (£29.94 inc VAT)

OEM: 66-1493

BSA Inlet / Exhaust Cam Follower Tappet - B Group Circa 1946-60 + M Group Circa 1937-63 Exhaust and inlet tappet on B31, B32, B33, B34 models from 1946...

Quantity:

+ −

CODE: pist198

Harris Pistons for Triumph T21/T90 350cc

£124.95 (£149.94 inc VAT)

OEM: CP198, C.P.198, CP 198, E4670, 70-4670

Pair of Harris Pistons for Triumph T21/T90 350cc (1957-66) Supplied as 2 Pistons, complete with rings, gudgeon pin and circlips. Bore Size : 58.25mm...

Select Options

CODE: vcup7203-B13

Triumph Valve Spring Bottom Collar / Cup - T140, TR7 and TSX Models - Circa 1979 Onwards

£4.45 (£5.34 inc VAT)

OEM: 71-7203, E17203

Triumph Valve Spring Bottom Collar / Cup - T140, TR7 and TSX Models - Circa 1979 Onwards Valve spring retaining collar, sits under the valve spring...

Quantity:

+ −

CODE: clip0954x2-B13

BSA Triumph Piston Gudgeon Pin Circlips - G Shaped With Tangs

£1.95 (£2.34 inc VAT)

OEM: 66-0954, 66-954, 71-3185, 71-3700, 71-2970

BSA Triumph Piston Gudgeon Pin Circlips - G Shaped With Tangs 2 x piston wrist pin circlips suitable for a wide range of BSA models including: A10, C12,...

Quantity:

+ −

CODE: wtf-chain-UB520-118

520 Unibear Gold Standard Heavy Duty Motorcycle Chain - 118 Links

£20.95 (£25.14 inc VAT)

520 Unibear Gold Standard Heavy Duty Motorcycle Chain - 118 Links Good quality heavy duty standard 520 chain - ideal for motocross and off road riding....

Quantity:

+ −

CODE: screw0689-A4

Triumph Nacelle Fitting / Handlebar Switch to Lever Clamp Screw - 4BA x 1/4"

£0.75 (£0.90 inc VAT)

OEM: 97-0689, H689

Triumph Nacelle Fitting / Handlebar Switch to Lever Clamp Screw - 4BA x 1/4" Domed head slotted screw as used on pre unit and unit models to attach the...

Quantity:

+ −

CODE: clutch0423-B23

Triumph Clutch Spring Bolt - Pre Unit Models With 4 Friction Plate Clutch + 3TA Models

£2.45 (£2.94 inc VAT)

OEM: 57-0423, T423

Triumph Clutch Spring Bolt - Pre Unit Models With 4 Friction Plate Clutch + 3TA Models Short type clutch spring screwed pin. Correct fitment on 5T, TR5...

Quantity:

+ −

CODE: clutch3282-B4

BSA/Triumph Clutch Operating / Release Rack - Unit Singles Circa 1965 Onwards

£19.95 (£23.94 inc VAT)

OEM: 40-3282, 57-2699, T2699

BSA/Triumph Clutch Operating / Release Rack - Unit Singles Circa 1965 Onwards Locates in the outer timing cover - activates the clutch operating arm and...

Quantity:

+ −

CODE: oilseal0749-met

BSA Bantam Crankshaft Drive Side / Timing Side Oil Seal - All Models D1, D3, D5, D7, D10, D14 and B175

£2.45 (£2.94 inc VAT)

OEM: 90-0749, 90-749

BSA Bantam Crankshaft Drive Side / Timing Side Oil Seal - All Models D1, D3, D5, D7, D10, D14 and B175 Crankshaft drive side and timing side oil seal on...

Options

CODE: gk1433

BSA Cylinder Base Gasket - A65 / A50R Models From 1970 Onwards

£2.95 (£3.54 inc VAT)

OEM: 71-1433, 71-1036

BSA Cylinder Base Gasket - A65 / A50R Models From 1970 Onwards Cylinder barrel base gasket - correct fitment on later models with 3/8" studs. A65 models...

Quantity:

+ −

CODE: pmp202-hep

Triumph Plunger Type Oil Pump - Unit Twins From 1959 Onwards - Hepolite

£104.95 (£125.94 inc VAT)

OEM: 70-6928, 71-7317, 70-9421, 70-3878, E6928, E17317, E9421, E3878

Triumph Plunger Type Oil Pump - Unit Twins From 1959 Onwards - Hepolite Premium quality new production Hepolite oil pump suitable for all 350cc, 500cc,...

Quantity:

+ −

CODE: wash3963

Triumph 1/4" Rocker Box Set Screw Washer - 750cc Twins From 1973 Onwards

£0.25 (£0.30 inc VAT)

OEM: 60-3963, D3963

Triumph 1/4" Rocker Box Set Screw Washer - 750cc Twins From 1973 Onwards Plain washer used with the set screws to secure the rocker box covers on T140,...

Quantity:

+ −

CODE: nut2053-B13

BSA/Triumph Alternator Rotor Nut - Shouldered - C12, C15, B25, B40, B44, B50 and TR25W Models

£5.95 (£7.14 inc VAT)

OEM: 29-2053, 70-8146

BSA/Triumph Alternator Rotor Nut - Shouldered - C12, C15, B25, B40, B44, B50 and TR25W Models Flanged nut used to secure the alternator rotor on the...

Quantity:

+ −

CODE: kick0271-B4

BSA/Triumph Kickstart Ratchet Nut - Unit Singles Circa 1965 Onwards

£2.95 (£3.54 inc VAT)

OEM: 76-0271, 57-2686, T2686

BSA/Triumph Kickstart Ratchet Nut - Unit Singles Circa 1965 Onwards Mainshaft nut - correct fitment on B40, B44, B25, B50 and TR25W models. Thread:...

Quantity:

+ −

67-3257 - BSA Clutch Centre and Mainshaft Nut - A7 / A10 Plunger Frame Models Circa 1949-57

CODE: clutch3257-B23

BSA Clutch Centre and Mainshaft Nut - 6 Spring A7 / A10 Plunger Frame Models Circa 1949-57

£3.95 (£4.74 inc VAT)

OEM: 67-3257

BSA Clutch Centre and Mainshaft Nut - A7 / A10 Plunger Frame Models Circa 1949-57 Clutch centre locknut with chamfered edges on both sides. Correct...

Quantity:

+ −

CODE: bolt-set0074-B14

Triumph Engine Mounting Stud / Bolt Set - Unit 650cc Models from 1963-67

£72.95 (£87.54 inc VAT)

OEM: 00-0074, 82-5469, 82-6498, 82-5532, 82-3805, 82-3069

Triumph Engine Mounting Stud / Bolt Set - Unit 650cc Models from 1963-67 Engine to frame mounting bolts, studs, spacers and fixings. Suitable for 6T, TR6...

Quantity:

+ −

CODE: stud2825-B19

Triumph Engine Plate to Frame Tie Stud - Unit 350/500cc Models Circa 1959-67

£2.45 (£2.94 inc VAT)

OEM: 82-2825, F2825

Triumph Engine Plate to Frame Tie Stud - Unit 350/500cc Models Circa 1959-67 Upper front engine plate to frame mounting stud. Correct fitment on 3TA,...

Quantity:

+ −

CODE: bolt3937-B19

Triumph Engine Plates to Crankcase Domed Bolt - Unit 350/500cc Models Circa 1959-63

£2.45 (£2.94 inc VAT)

OEM: 70-3937, E3937

Triumph Engine Plates to Crankcase Domed Bolt - Unit 350/500cc Models Circa 1959-63 Front engine plate to crankcase domed head bolt - three required per...

Quantity:

+ −

CODE: kick4343-B4

BSA/Triumph Kickstart Ratchet Nut Lockwasher - Unit Singles From 1971 Onwards

£0.95 (£1.14 inc VAT)

OEM: 57-4343, T4343

BSA/Triumph Kickstart Ratchet Nut Lockwasher - Unit Singles From 1971 Onwards Mainshaft tab lock washer - correct fitment on B25, B50 and later TR25W...

Quantity:

+ −

CODE: bolt6620-B19

Triumph Chaincase Cover Cheese Head Screw - 650/750cc Twins Circa 1969-78

£1.95 (£2.34 inc VAT)

OEM: 14-6620

Triumph Chaincase Cover Cheese Head Screw - 650/750cc Twins Circa 1969-78 Chaincase cover posi-drive screw - correct fitment on OIF T120 + T140 and TR7...

Quantity:

+ −

CODE: bolt6606-B19

1/4" UNC - 3/4" Cheese Head Screw - Triumph Unit Singles + 750cc Twins and Triples

£1.45 (£1.74 inc VAT)

OEM: 14-6606

1/4" UNC - 3/4" Cheese Head Screw - Triumph Unit Singles + 750cc Twins and Triples Posi-drive screw used on various Triumph models - rocker box cover on...

Quantity:

+ −

CODE: bolt1086-B19

BSA M20/M21 Cylinder Head Bolt - Circa 1937-49 - Short Type

£3.45 (£4.14 inc VAT)

OEM: 35-1086

BSA M20/M21 Cylinder Head Bolt - Circa 1937-49 - Short Type High quality BZP plated high tensile bolt. Five required for models from 1940-49 onwards....

Quantity:

+ −

CODE: stud1214-B19

BSA Cylinder Barrel Fixing Stud - A10 Models Circa 1958-62

£5.45 (£6.54 inc VAT)

OEM: 67-1214

BSA Cylinder Barrel Fixing Stud - A10 Models Circa 1958-62 Cylinder base stud as used on all later A10 models from 1958 onwards. Nine required per bike....

Quantity:

+ −

CODE: stud0074-B19

BSA Cylinder Barrel Fixing Stud / Inner Crankcase Stud - A7 and A10 Models

£3.45 (£4.14 inc VAT)

OEM: 67-0074, 29-0565, 67-74, 29-565

BSA Cylinder Barrel Fixing Stud / Inner Crankcase Stud - A7 and A10 Models Cylinder base stud as used on all A7 + early A10 models circa 1949-57 Nine...

Quantity:

+ −

CODE: clip4705-B13

Triumph Primary Chain Oiler Tube Clip - Unit 650/750cc Models From 1963 Onwards

£2.45 (£2.94 inc VAT)

OEM: 70-4705, E4705

Triumph Primary Chain Oiler Tube Clip - Unit 650/750cc Models From 1963 Onwards Positions the primary chain oiler tube - locates in the inner primary...

Quantity:

+ −

CODE: cov3671-B4

Triumph Tappet Inspection Cover - T140 and TR7 Models Circa 1974-85

£12.95 (£15.54 inc VAT)

OEM: 71-3671, E13671

Triumph Tappet Inspection Cover - T140 and TR7 Models Circa 1974-85 Six hole rocker box inspection cover as used on the models listed from 1974 onwards....

Quantity:

+ −

CODE: gear4009-B4

BSA Gearchange Return Spring - A50 and A65 Models From 1970 Onwards

£2.95 (£3.54 inc VAT)

OEM: 57-4009

BSA Gearchange Return Spring - A50 and A65 Models From 1970 Onwards Larger type gear change lever return spring for use with an eccentric cup. Correct...

Quantity:

+ −

CODE: gear4027-B4

BSA Gearchange Return Spring - A50 and A65 Models Circa 1962-69

£2.95 (£3.54 inc VAT)

OEM: 57-4027, 68-3125, 68-3084

BSA Gearchange Return Spring - A50 and A65 Models Circa 1962-69 Early type gear change lever return spring - correct fitment on A50 and A65 models circa...

Quantity:

+ −

70-1555, E1555 - Triumph Crankcase Halves Top Rear Bolt - Pre Unit Models Circa 1939-62

CODE: bolt1555-B19

Triumph Crankcase Halves Top Rear Bolt - Pre Unit 500/650cc Models Circa 1939-62

£1.75 (£2.10 inc VAT)

OEM: 70-1555, E1555

Triumph Crankcase Halves Top Rear Bolt - Pre Unit Models Circa 1939-62 Top rear crankcase securing bolt as used on pre unit 5T, TR5, T100, 6T, T110, TR6...

Quantity:

+ −

CODE: circlip3494-B13

Triumph Gearbox Layshaft Circlip - 5 Speed 650/750cc Twins and Triples

£0.95 (£1.14 inc VAT)

OEM: 60-3494, D3494

Triumph Gearbox Layshaft Circlip - 5 Speed 650/750cc Twins and Triples Correct fitment on five speed T120, TR6, T140, TR7, T150, T160, TSS and TSX models....

Quantity:

+ −

CODE: clutch117B-B23

Triumph / BSA Clutch Spring Nut - Pre Unit and Unit Twins - Brass

£4.75 (£5.70 inc VAT)

OEM: 57-2526, T2526, 42-3199, T427, 57-0427

Triumph / BSA Clutch Spring Nut - Pre Unit and Unit Twins - Brass Clutch spring adjuster nut as used on both pre unit and unit models. Triumph:...

Quantity:

+ −

CODE: clutch117S-B23

Triumph / BSA Clutch Spring Nut - Pre Unit and Unit Twins - Steel

£3.45 (£4.14 inc VAT)

OEM: 57-2526, T2526, 42-3199, T427, 57-0427

Triumph / BSA Clutch Spring Nut - Pre Unit and Unit Twins - Steel Clutch spring adjuster nut as used on both pre unit and unit models. Triumph:...

Quantity:

+ −

CODE: kick4339-B4

BSA/Triumph Kickstart Ratchet - Unit Singles From 1971 Onwards

£18.95 (£22.74 inc VAT)

OEM: 57-4339, T4339

BSA/Triumph Kickstart Ratchet - Unit Singles From 1971 Onwards 17T kickstart ratchet pinion - correct fitment on B25, B50 and later TR25W models circa...

Quantity:

+ −

CODE: kick4336-B4

BSA/Triumph Kickstart Pinion - Unit Singles From 1971 Onwards

£32.95 (£39.54 inc VAT)

OEM: 57-4336, T4336

BSA/Triumph Kickstart Pinion - Unit Singles From 1971 Onwards 17T kickstart ratchet pinion - correct fitment on B25, B50 and TR25W models circa 1971...

Quantity:

+ −

CODE: spin1512-B13

Triumph Rocker Spindle - Pre Unit 500/650cc Models - 1946-62 + Unit 650cc Models

£34.95 (£41.94 inc VAT)

OEM: 70-1512, E1512

Triumph Rocker Spindle - Pre Unit 500/650cc Models - 1946-62 + Unit 650cc Models Inlet and exhaust rocker shaft - two required per bike. Correct fitment...

Quantity:

+ −

68-0144, 68-144 - BSA Rocker Box Gasket - A50 and A65 Models - Circa 1962-70

CODE: gkt-0144

BSA Rocker Box Gasket - A50 and A65 Models With 1/4" Studs - Circa 1962-70

£2.95 (£3.54 inc VAT)

OEM: 68-0144, 68-144

BSA Rocker Box Gasket - A50 and A65 Models - Circa 1962-70 Rocker box cover gasket - correct fitment on A50 and A65 models with 1/4" rocker box studs....

Quantity:

+ −

CODE: bolt6103-B19

Triumph Rocker Box Cover Screw - T140 and TR7 Models Circa 1973-78

£0.95 (£1.14 inc VAT)

OEM: 14-6103

Triumph Rocker Box Cover Screw - T140 and TR7 Models Circa 1973-78 Rocker box / tappet Inspection cover hex head set screw as used on 750cc twins circa...

Quantity:

+ −

CODE: screw2162-B19

Triumph Gearbox Outer Cover Screw - T140 and TR7 Models Circa 1973-78

£1.25 (£1.50 inc VAT)

OEM: 21-2162, S2162

Triumph Gearbox Outer Cover Screw - T140 and TR7 Models Circa 1973-78 Outer gearbox cover to crankcase long cheese head pozi drive screw. Correct fitment...

Quantity:

+ −

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

Account Details

Quick Links

Feked.com

Feked Online