.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Electrical

fklit159-A4
£2.45 (£2.94 inc VAT)
OEM: 862217
Headlight Headlamp Wiring Rubber Grommet Approx 1+3/4" diameter, will fit the headlight holes of approx 1+5/8" OEM 862217
+

fkmag001-A17
£2.45 (£2.94 inc VAT)
OEM: 455190
Genuine Lucas Brushes - 455190 Earth Brushes and springs for Lucas K2F Twin cylinder Magnetos. Made in England. Sold Singly - Price is for ONE brush OEM:...
+

fkmag003-A17
£2.45 (£2.94 inc VAT)
OEM: 451260, 404435
Genuine Lucas Pick-up brushes - 451260 For Lucas K2F Magnetos. Complete with springs. Can also be used for distributor caps Sold Singly - Price for ONE...
+

fkwiring445
£2.45 (£2.94 inc VAT)
Double Insulated Connector Sleeve For Bullet ends. Supplied in pack of 5
+

clutch4253-B18
£2.45 (£2.94 inc VAT)
OEM: 68-3218, 60-4253, S66-1, 21-0066
BSA / Triumph Clutch Hub To Mainshaft / Alternator Rotor Woodruff Key Clutch hub to gearbox mainshaft key, prevents the clutch hub turning on the shaft....
+

wire257
£2.45 (£2.94 inc VAT)
Polyethylene spiral binding, ideal for electrical harnesses and wiring looms. Protects cables against chafing OD: 12mm Minimum ID: 10mm Maximum ID:...
+

wire214
£2.45 (£2.94 inc VAT)
Black PVC sleeving for use on electrical harnesses Protects cables against chafing ID: 14mm Price is per METRE of sleeve.
+

bulb410-A14
£2.45 (£2.94 inc VAT)
OEM: P45T, P45T41, 410, R2
Bulb Headlight 12v 45/40w P45T - P45T41 - 410, R2 12 Volt, double filament head lamp bulb, also known as P45T41, ECE R2,  G12.5 DUPLO, Lucas 410.
+

nut2182-B13
£2.45 (£2.94 inc VAT)
OEM: 70-3735
Alternator Rotor Nut - Triumph T120, T140, TR7, T160 - 1971-82 To secure the alternator rotor on the shaft. Thread: 7/16" UNF - 20 TPI Longer type with...
+

lens0004-A12
£2.45 (£2.94 inc VAT)
OEM: CEV 332 333, 999 0004
Harris Matchless Indicator Lens - Round Flat Type - CEV 332 333 As fitted to Harris Matchless and some Royal Enfield Models Stamped with SAE Approval Code...
+

dyn3119-A17
£2.45 (£2.94 inc VAT)
OEM: 70-3119, E3119
Triumph Tab Washer - Pre Unit 500/650cc Alternator Models - 1950-62 Crank drive side rotor tab washer to fit early pre-unit Triumph alternator models....
+

nut0569-A17
£2.45 (£2.94 inc VAT)
OEM: 200569, LU200569
Dynamo To Magneto Nut - 200569 Dynamo to magneto nut as used on many E3 and M Series magnetos. Overall length: 9/16" (14.5mm) OEM: 200569, LU200569
+

sw224R-A4
£2.45 (£2.94 inc VAT)
OEM: 82-5983, F5983, 68-9167
Lucas 88SA Ignition/Lighting Switch Retaining Bracket Retaining clip used on rotary type 88SA switch assemblies, fits over the switch body, secured with...
+

wire258-15mm
£2.45 (£2.94 inc VAT)
Polyethylene Cable / Wire Spiral Binding - Expandable Electric Sleeve - 15mm or 8mm OD Ideal for electrical harnesses and wiring looms. The spiral wrap...
 

term0352
£2.25 (£2.70 inc VAT)
7.9mm Ring Terminal for 7.10mm Diameter Cable - Non Insulated Hole diameter: 5/16" (7.9mm) ID before crimping: 9/32" (7.5mm) Overall length: 1+3/8"...
+

fkel1-A23
£1.99 (£2.39 inc VAT)
Fuse Holder Piggy Back. Comes with one 15A fuse. Takes 25mm Fuses
+

fkel8-A23
£1.99 (£2.39 inc VAT)
Fuse Holder Black Plastic. Comes with 1 x 15a, 25mm fuse. The terminals can be moved to fit 25mm or 30mm fuses.
+

fklit016-A4
£1.99 (£2.39 inc VAT)
Headlamp rim fixing clip & screw.
+

fseh002-A23
£1.99 (£2.39 inc VAT)
OEM: 54190387, 54938986, CAB837
Lucas Type Fuse Holder Black Bakelite Supplied with 1 x 20 amp fuse. Uses 30mm glass fuses. As fitted to Triumph, BSA and Norton motorcycles. OEM:...
+

ceramic-fuses-A23
£1.99 (£2.39 inc VAT)
25mm Continential Ceramic Fuses - pack of 5 Also known as Bosch fuses 5 x Fuses. (example photo shows 10) Available in 5A, 8A, 16A, 25A

6vbulb7130-A8
£1.95 (£2.34 inc VAT)
OEM: LLB295, 7130
Headlamp Bulb 6v 15w P26s - LLB295, 7130 6 Volt, Single filament bulb. Base shoulder diameter 26mm, Base outer diameter 31mm, 3 locating lugs.
+

fkwiring446
£1.95 (£2.34 inc VAT)
6.3mm Female Spade Terminal Connector, Crimp type. Supplied in pack of 10
+

fkwiring449
£1.95 (£2.34 inc VAT)
Clear Insulator Sleeve For 9.5mm Spade Terminal. Supplied in pack of 5
+

fkbb48-A13
£1.95 (£2.34 inc VAT)
OEM: 1157
Bulb 6v 21/3w BAY15d - Small Globe with Offset Pins 6v bulb, 21/3w double filament with 15mm diameter base and double contact. Offset pins Typical use:...
+

washer300-B18
£1.95 (£2.34 inc VAT)
OEM: 68-0325, 68-325, 70-8043, 40-0455
BSA Alternator Rotor Lockwasher - A50, A65 Models + BSA/Triumph Unit Singles All BSA A50 and A65 models from 1962-1972 + all BSA unit singles - C15, B40,...
+

term133
£1.95 (£2.34 inc VAT)
6.30mm Push-On Piggy-Back Terminal For 0.5mm - 1.5mm Cable (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term115
£1.95 (£2.34 inc VAT)
6.30mm Push-On Piggy-Back Terminal For 1.5mm - 2.5mm Cable (for 1.5-2.5mm square cable) Supplied in pack of 10
+

screw133551-pair-A4
£1.95 (£2.34 inc VAT)
OEM: 133551
Rear Lamp Lens Mounting Screws - LU564, 573839 Pair of screws for Lucas L564, LU564, 573839 tail light lens. Length UH: 1+11/16" (43mm). Price is for...
+

dyn8614-A17
£1.95 (£2.34 inc VAT)
OEM: 188614, LU188614
Lucas Generator Dynamo Oil Seal - E3 / E3H / E3L - 188614 Bearing oil seal to fit many E3 dynamos such as 20003,  20009, 20035, 20011, 20037. OD: 1+1/4"...
+

pin2443-A17
£1.95 (£2.34 inc VAT)
OEM: 57-2443, T2443
Triumph Ignition Timing Pointer - Unit 650cc TR6, T120 Models - Circa 1968-72 For use on 650cc models with removable alternator inspection cover....
+

sw380459-A4
£1.95 (£2.34 inc VAT)
OEM: 380459
Rubber Pad for Lucas 31563 Type Horn/Dip Switch Replacement rubber pad as used on Lucas handlebar clamp mounted switches. Lucas type 31563, 19-0706...
+

fkmag059-A17
£1.95 (£2.34 inc VAT)
OEM: 498131, LU498131
Lucas Magneto Auto Advance Unit Cover Clip 'C' washer that sits under the auto advance extraction bolt. ATD - automatic timing device OEM: 498131,...
+

ign7123-A4
£1.95 (£2.34 inc VAT)
OEM: 97-7123, H7123
Rubber Ignition Key Cap - Tumbler Type Barrel Ignition Switch - Later 750cc Twins Fits over the key, for use on Lucas tumbler type ignition - 54531899....
+

wire003
£1.95 (£2.34 inc VAT)
Single core PVC auto cable to BS6862. Electric Wire Electric cable suitable for 6volt or 12 volt motorcycles 65/0.30mm, 4.50mm², 35 amp (4.5mm square...

bulb274-A13
£1.95 (£2.34 inc VAT)
Bulb 6v 21/3w BA15d - Small Globe with Parallel Pins - American Fitting 6v bulb, 21/3w double filament with 15mm diameter base and double contact....
+

spacer2211-A4
£1.95 (£2.34 inc VAT)
OEM: 83-2211 F12211
BSA / Triumph Headlamp Bracket Wire Stay Top Fixing Spacer - OIF Models Circa 1971-73 Headlamp wire bracket top fixing spacer, locates between the rubber...
+

screw2192-A4
£1.95 (£2.34 inc VAT)
OEM: 21-2192, S2192
Triumph Short Switch Assembly to Brake Lever Housing Screw - 750cc Twins and Triples Circa 1973-78 Fillister head screw used to secure the right hand half...
+

screw2194-A4
£1.95 (£2.34 inc VAT)
OEM: 21-2194, S2194
Triumph Long Switch Assembly to Brake Lever Housing Screw - 750cc Twins and Triples Circa 1973-78 Fillister head screw used to secure the right hand half...
+

BB-LED95
£1.95 (£2.34 inc VAT)
Lucas 6v LED Instrument / Warning Lamp Bulb - BA7S Fitting 6 volt LED   bulb - standard single contact 7mm base. Suitable as for use in headlamp...
+

BB-LED96
£1.95 (£2.34 inc VAT)
Lucas 12v LED Instrument / Warning Lamp Bulb - BA7S Fitting 12 volt LED   bulb - standard single contact 7mm base. Suitable as for use in headlamp...
+

12vbulb501-A14-1
£1.75 (£2.10 inc VAT)
Bulb 12v 5w T10 Push-fit Wedge - 501
+

fkhtcab
£1.75 (£2.10 inc VAT)
Spark Plug H.T. Cable HT lead, plug leads, ignition leads Available in Black or Red Price per Metre 19/.30mm Copper Black PVC Ignition Cable - HT lead,...

fkkey53-A4
£1.75 (£2.10 inc VAT)
OEM: 318341, PRS8
Ignition Key - Spade Type - 318341, PRS8 For the Lucas PRS8 Switch Spare key Made from Stainless Steel Made in England OEM: 318341, PRS8
+

fkkey56-A4
£1.75 (£2.10 inc VAT)
OEM: 54336176, 88SA
Ignition Key - Spade Type - 54336176, 88SA For the Lucas 88SA Switch Spare key Made from Stainless Steel Made in England OEM: 54336176, 88SA
+

fkmag146-A17
£1.75 (£2.10 inc VAT)
Magneto advance cable grommet Fits over the cable, onto the magneto, for the advance/retard, to protect the magneto from oil and dust. OEM: LU454475, 454475
+

wire207
£1.75 (£2.10 inc VAT)
Black PVC sleeving for use on electrical harnesses Protects cables against chafing ID: 7mm Price is per METRE of sleeve.
+

pin0769-A17
£1.75 (£2.10 inc VAT)
OEM: 99-0769, 54419220, LI54419220
Contact Breaker Eccentric Adjusting Pin - Various Models - 54419220 Brass offset points adjusting pin to fit many Lucas points assemblies. Overall...
+

6vbulb3w-capless-A13
£1.75 (£2.10 inc VAT)
Bulb 6v 3w T10 Push-fit Wedge - Capless
+

clutch043h-B23
£1.75 (£2.10 inc VAT)
Cable Rubber Boot These Rubber boots are actually for clutch cables, We have found that they will fit on most ignition coil connectors, providing the...
+

fkcap020-A23
£1.65 (£1.98 inc VAT)
Spark Plug Caps - Rubber - Non Resistor Non resistor. Plain rubber spark plug cap. HT lead screws into the end and secured by clip. Recommended for...
+

fkwiring531
£1.65 (£1.98 inc VAT)
6.3mm Flag Connector, Insulator. Supplied in pack of 10
+

term112
£1.65 (£1.98 inc VAT)
8.40mm Ring Terminal For 3.0mm - 6.00mm Cable. 8.4mm hole. (for 3.0-6.0mm square cable) Electric wire connectors Supplied in pack of 5
+

term141
£1.55 (£1.86 inc VAT)
6.30mm Insulated Push-On Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term121T
£1.55 (£1.86 inc VAT)
6.40mm Ring Terminal For 1.5mm - 2.5mm Cable Supplied in pack of 10 (for 1.5-2.5mm square cable)
+

fkwiring447
£1.45 (£1.74 inc VAT)
Clear Insulator Sleeve For 6.3mm Spade Terminal. Supplied in pack of 10
+

wiring471-A17
£1.45 (£1.74 inc VAT)
OEM: 70-4144, 68-0209, E4144
Inner Alternator Wiring Grommet - Triumph and BSA Models Fits Triumph Unit construction models and BSA twins and singles. Wiring grommet that goes...
+

term102
£1.45 (£1.74 inc VAT)
5.30mm Ring Terminal For .5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term113
£1.45 (£1.74 inc VAT)
6.30mm Blade Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term126
£1.45 (£1.74 inc VAT)
6.30mm Blade Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term106
£1.45 (£1.74 inc VAT)
5.30mm Ring Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term117
£1.45 (£1.74 inc VAT)
6.30mm Push-On Spade Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term109
£1.45 (£1.74 inc VAT)
6.30mm Push-On Spade Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term122
£1.45 (£1.74 inc VAT)
6.40mm Ring Terminal For 3.0mm - 6.00mm Cable. (for 3.0-6.0mm square cable) Supplied in pack of 10
+

term127
£1.45 (£1.74 inc VAT)
6.30mm Insulated Push-On Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

dyn404-A17
£1.45 (£1.74 inc VAT)
OEM: 463334, LU463334
Tab washer, to fit the drive end of all Lucas dynamos. OEM: 463334, LU463334
+

term136
£1.45 (£1.74 inc VAT)
4.00mm Insulated Nipple Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term132
£1.45 (£1.74 inc VAT)
5.00mm Insulated Nipple Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term108
£1.45 (£1.74 inc VAT)
5.30mm Insulated Fork Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term135
£1.45 (£1.74 inc VAT)
4.00mm Insulated Receptacle Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term131
£1.45 (£1.74 inc VAT)
5.00mm Insulated Receptacle Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term104
£1.45 (£1.74 inc VAT)
5.30mm Insulated Fork Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

bulb987-A14-1
£1.45 (£1.74 inc VAT)
OEM: MES/E10, LLB987
Bulb 12v 2.2w MES/E10 - Lucas No. LLB987 12v clear bulb, 2.2w single filament screw in type, 11mm diameter base, single contact.
+

grom4707-A17
£1.45 (£1.74 inc VAT)
OEM: 70-4707, E4707
Triumph/BSA Contact Breaker Points Lead Wire Grommet - Various Models Points wire sealing grommet as used on BSA and Triumph twins from 1963 onwards....
+

wiring-term004
£1.45 (£1.74 inc VAT)
Bosch Type Distributor Terminal - Straight Stainless Steel - Crimp On Push Fit Type Stainless steel HT terminal to suit Bosch distributor caps with 4mm...
+

boot9011-F12
£1.45 (£1.74 inc VAT)
OEM: 54949011, 458658, 421554, 19-0865, 99-0643
Lucas Type Coil / HT Lead Cover Rubber Boot Rubber grommet / shroud as used on standard Lucas 6v and 12v coils. Grooved internal edge to ensure secure...
+

wiring0705-F12
£1.45 (£1.74 inc VAT)
OEM: 40-0705, 40-705, 70-8148, E8148
BSA Alternator or Contact Breaker Leads Wiring Grommet - A50, A65, B25, B50 + Bantam Models Double sided rubber grommet to secure alternator wiring, as...
+

sw-part5413-A4
£1.45 (£1.74 inc VAT)
OEM: 82-5413, F5413
Triumph Brake Light Switch Lever D Washer - 650cc Models 1964-70 + 350/500cc From 1968 Onwards Brake rod to stop light switch lever D washer - correct...
+

term125
£1.45 (£1.74 inc VAT)
10.50mm Ring Terminal For 3.0mm - 6.00mm Cable. 10.5mm hole. (for 3.0-6.0mm square cable) Electric wire connectors Supplied in pack of 5
+

6vbulb253-A13
£1.45 (£1.74 inc VAT)
OEM: S8.5D, 253, LLB253
6v Festoon Bulb - 5w S8.5D - 253 6 volt, 5 watt clear glass festoon bulb with single filament. 38mm long with 11mm diameter glass tube and 8.5mm diameter...
+

nut1915-B13
£1.45 (£1.74 inc VAT)
OEM: 21-1915, S1915
Triumph Alternator Rotor Nut - T90, T100 and TR5T Models From 1969 Onwards To secure the alternator rotor on the shaft - correct fitment on 350/500cc...
+

wiring375
£1.35 (£1.62 inc VAT)
Red Battery Terminal Insulator Cover Red rubber battery terminal cover, to protect against short circuit. Approx size: Wire hole 8mm, Terminal hole 17mm
+

wiring370
£1.35 (£1.62 inc VAT)
Black Battery Terminal Insulator Cover Black rubber battery terminal cover, to protect against short circuit. Terminal rubber boot Approx size: Wire hole...
+

rubb779-A4
£1.25 (£1.50 inc VAT)
OEM: 97-2209, 70-7554, 71-2209
Triumph Headlight Mounting Grommet Various models from 1973 onwards. OEM: 97-2209, 70-7554, 71-2209
+

gask766
£1.25 (£1.50 inc VAT)
Magneto Triangle Gasket Suit most 3 bolt fixing Magnetos, such as AJS, Matchless, and other K2f magnetos OEM: 67-1258
+

12vbulb504-A14-1
£1.25 (£1.50 inc VAT)
OEM: 504, 2821
12v 3W Wedge Fitting Bulb Panel indicator bulbs, 2mm push fit, capless wedge type. W2.1x9d Overall length: 24mm Diameter: 9.5mm OEM: 504, 2821
+

amm-seal-01-A4
£1.25 (£1.50 inc VAT)
Ammeter O Ring Seal 1+3/4 inch For use with 1+3/4" (45mm) Ammeters Fits under the bezel to cushion the ammeter and provide a good seal that prevent...
+

sw/cover2086-A4
£1.25 (£1.50 inc VAT)
OEM: 60-2086, D2086
Front Brake Cable Stop Switch Cover - Triumph/BSA/Norton Models Circa 1968-74 Rubber sleeve used to cover the In-line front brake cable switch as used on...
+

12vbulb-284-A14-1
£0.99 (£1.19 inc VAT)
OEM: 284, 2723
12v 2.3W Small Wedge Fitting Bulb Panel indicator bulbs, push fit, wedge type. Approx 18mm x 5mm, capless, 2mm push fit. OEM: 284, 2723
+

fkbb08-A14
£0.95 (£1.14 inc VAT)
Bulb 12v 21/5w SBC BAY15d - 380 12v Bulb, 21/5w Double Filament, 15mm diameter base, double contact. Typical use - Stop/Tail light. Also known as Lucas 380
+

fkbb12-A13
£0.95 (£1.14 inc VAT)
Genuine Lucas Bulb 6v 21/5w BAY15D - 1013 6v Bulb, 21W/5W Double Filament, 15mm diameter base, double contact, offset pins Typical use: Stop/Tail light...
+

fkmag112-A17
£0.95 (£1.14 inc VAT)
OEM: 06-8032, 068032
Magneto Advance/Retard Spring - 06-8032, 068032 Springs used for the Advance and Retard mechanism in the Magneto Price for ONE Spring OEM: 06-8032, 068032
+

wiring470-A17
£0.95 (£1.14 inc VAT)
OEM: 71-1345
Outer Alternator Wiring Grommet - Triumph and BSA Models Wiring grommet that goes around the alternator wire coming from the primary chaincase. These...
+

reflect-stick-A7
£0.95 (£1.14 inc VAT)
Rear Number Plate Reflector Stick-on type Simply peel off the backing and stick on the number plate
+

k2f-005-A15
£0.95 (£1.14 inc VAT)
OEM: 459005
Magneto Bearing Insulator Washer Large Used on K2F Magnetos, and others ID: 1+1/8" (29mm) OEM: 451379, 459005
+

k2f-932-A21
£0.95 (£1.14 inc VAT)
OEM: 463932
Magneto Bearing Insulator Washer Small Used on K2F Magnetos, and others ID: 1" (26mm) OEM: 463932
+

screw205-B18
£0.95 (£1.14 inc VAT)
OEM: 82-4129, F4129
Contersunk Screw - Rotor Cover or Tank Badge - 82-4129 To screw the rotor cover on the primary chaincase. Can also be used for Tank Badges, but my need to be...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.