.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Electrical

nut8763-B13
£0.95 (£1.14 inc VAT)
OEM: 70-8763, E8763
Triumph Alternator Rotor Nut - T150 Trident Models Circa 1968-74 - Long Type Longer type sleeve nut used to secure the alternator rotor on the shaft....
+

grom5466-A15
£0.95 (£1.14 inc VAT)
OEM: 82-5466, F5466
Triumph Coil Mounting Rubber Grommet - Unit 350/500/650cc Twins Circa 1963-69 Rubber grommet - locates between the two spacers over the the coil mounting...
+

washer3852-B13
£0.95 (£1.14 inc VAT)
OEM: 70-3852, E3852
Triumph Alternator Rotor Tab Washer - Unit 350/500cc Models Circa 1959-63 Crankshaft rotor lockwasher - correct fitment on 3TA, 5TA, T90 and T100 models...
+

mag464-A17
£0.95 (£1.14 inc VAT)
OEM: 458658
Lucas K2F Magneto HT Lead to Pick-Up Cover Rubber Boot Used on most K2F magnetos - locates over the HT leads to protect the acorn nuts on the pick-ups....
+

12vbulb-284-A14-1
£0.99 (£1.19 inc VAT)
OEM: 284, 2723
12v 2.3W Small Wedge Fitting Bulb Panel indicator bulbs, push fit, wedge type. Approx 18mm x 5mm, capless, 2mm push fit. OEM: 284, 2723
+

rubb779-A4
£1.25 (£1.50 inc VAT)
OEM: 97-2209, 70-7554, 71-2209
Triumph Headlight Mounting Grommet Various models from 1973 onwards. OEM: 97-2209, 70-7554, 71-2209
+

gask766
£1.25 (£1.50 inc VAT)
Magneto Triangle Gasket Suit most 3 bolt fixing Magnetos, such as AJS, Matchless, and other K2f magnetos OEM: 67-1258
+

12vbulb504-A14-1
£1.25 (£1.50 inc VAT)
OEM: 504, 2821
12v 3W Wedge Fitting Bulb Panel indicator bulbs, 2mm push fit, capless wedge type. W2.1x9d Overall length: 24mm Diameter: 9.5mm OEM: 504, 2821
+

amm-seal-01-A4
£1.25 (£1.50 inc VAT)
Ammeter O Ring Seal 1+3/4 inch For use with 1+3/4" (45mm) Ammeters Fits under the bezel to cushion the ammeter and provide a good seal that prevent...
+

sw/cover2086-A4
£1.25 (£1.50 inc VAT)
OEM: 60-2086, D2086
Front Brake Cable Stop Switch Cover - Triumph/BSA/Norton Models Circa 1968-74 Rubber sleeve used to cover the In-line front brake cable switch as used on...
+

wiring375
£1.35 (£1.62 inc VAT)
Red Battery Terminal Insulator Cover Red rubber battery terminal cover, to protect against short circuit. Approx size: Wire hole 8mm, Terminal hole 17mm
+

wiring370
£1.35 (£1.62 inc VAT)
Black Battery Terminal Insulator Cover Black rubber battery terminal cover, to protect against short circuit. Terminal rubber boot Approx size: Wire hole...
+

fkwiring447
£1.45 (£1.74 inc VAT)
Clear Insulator Sleeve For 6.3mm Spade Terminal. Supplied in pack of 10
+

wiring471-A17
£1.45 (£1.74 inc VAT)
OEM: 70-4144, 68-0209, E4144
Inner Alternator Wiring Grommet - Triumph and BSA Models Fits Triumph Unit construction models and BSA twins and singles. Wiring grommet that goes...
+

term102
£1.45 (£1.74 inc VAT)
5.30mm Ring Terminal For .5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term113
£1.45 (£1.74 inc VAT)
6.30mm Blade Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term126
£1.45 (£1.74 inc VAT)
6.30mm Blade Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term106
£1.45 (£1.74 inc VAT)
5.30mm Ring Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term117
£1.45 (£1.74 inc VAT)
6.30mm Push-On Spade Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term109
£1.45 (£1.74 inc VAT)
6.30mm Push-On Spade Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term122
£1.45 (£1.74 inc VAT)
6.40mm Ring Terminal For 3.0mm - 6.00mm Cable. (for 3.0-6.0mm square cable) Supplied in pack of 10
+

term127
£1.45 (£1.74 inc VAT)
6.30mm Insulated Push-On Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

dyn404-A17
£1.45 (£1.74 inc VAT)
OEM: 463334, LU463334
Tab washer, to fit the drive end of all Lucas dynamos. OEM: 463334, LU463334
+

term136
£1.45 (£1.74 inc VAT)
4.00mm Insulated Nipple Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term132
£1.45 (£1.74 inc VAT)
5.00mm Insulated Nipple Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term108
£1.45 (£1.74 inc VAT)
5.30mm Insulated Fork Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term135
£1.45 (£1.74 inc VAT)
4.00mm Insulated Receptacle Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term131
£1.45 (£1.74 inc VAT)
5.00mm Insulated Receptacle Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term104
£1.45 (£1.74 inc VAT)
5.30mm Insulated Fork Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

bulb987-A14-1
£1.45 (£1.74 inc VAT)
OEM: MES/E10, LLB987
Bulb 12v 2.2w MES/E10 - Lucas No. LLB987 12v clear bulb, 2.2w single filament screw in type, 11mm diameter base, single contact.
+

grom4707-A17
£1.45 (£1.74 inc VAT)
OEM: 70-4707, E4707
Triumph/BSA Contact Breaker Points Lead Wire Grommet - Various Models Points wire sealing grommet as used on BSA and Triumph twins from 1963 onwards....
+

wiring-term004
£1.45 (£1.74 inc VAT)
Bosch Type Distributor Terminal - Straight Stainless Steel - Crimp On Push Fit Type Stainless steel HT terminal to suit Bosch distributor caps with 4mm...
+

boot9011-F12
£1.45 (£1.74 inc VAT)
OEM: 54949011, 458658, 421554, 19-0865, 99-0643
Lucas Type Coil / HT Lead Cover Rubber Boot Rubber grommet / shroud as used on standard Lucas 6v and 12v coils. Grooved internal edge to ensure secure...
+

wiring0705-F12
£1.45 (£1.74 inc VAT)
OEM: 40-0705, 40-705, 70-8148, E8148
BSA Alternator or Contact Breaker Leads Wiring Grommet - A50, A65, B25, B50 + Bantam Models Double sided rubber grommet to secure alternator wiring, as...
+

sw-part5413-A4
£1.45 (£1.74 inc VAT)
OEM: 82-5413, F5413
Triumph Brake Light Switch Lever D Washer - 650cc Models 1964-70 + 350/500cc From 1968 Onwards Brake rod to stop light switch lever D washer - correct...
+

term125
£1.45 (£1.74 inc VAT)
10.50mm Ring Terminal For 3.0mm - 6.00mm Cable. 10.5mm hole. (for 3.0-6.0mm square cable) Electric wire connectors Supplied in pack of 5
+

6vbulb253-A13
£1.45 (£1.74 inc VAT)
OEM: S8.5D, 253, LLB253
6v Festoon Bulb - 5w S8.5D - 253 6 volt, 5 watt clear glass festoon bulb with single filament. 38mm long with 11mm diameter glass tube and 8.5mm diameter...
+

nut1915-B13
£1.45 (£1.74 inc VAT)
OEM: 21-1915, S1915
Triumph Alternator Rotor Nut - T90, T100 and TR5T Models From 1969 Onwards To secure the alternator rotor on the shaft - correct fitment on 350/500cc...
+

term141
£1.55 (£1.86 inc VAT)
6.30mm Insulated Push-On Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term121T
£1.55 (£1.86 inc VAT)
6.40mm Ring Terminal For 1.5mm - 2.5mm Cable Supplied in pack of 10 (for 1.5-2.5mm square cable)
+

fkcap020-A23
£1.65 (£1.98 inc VAT)
Spark Plug Caps - Rubber - Non Resistor Non resistor. Plain rubber spark plug cap. HT lead screws into the end and secured by clip. Recommended for...
+

fkwiring531
£1.65 (£1.98 inc VAT)
6.3mm Flag Connector, Insulator. Supplied in pack of 10
+

term112
£1.65 (£1.98 inc VAT)
8.40mm Ring Terminal For 3.0mm - 6.00mm Cable. 8.4mm hole. (for 3.0-6.0mm square cable) Electric wire connectors Supplied in pack of 5
+

12vbulb501-A14-1
£1.75 (£2.10 inc VAT)
Bulb 12v 5w T10 Push-fit Wedge - 501
+

fkhtcab
£1.75 (£2.10 inc VAT)
Spark Plug H.T. Cable HT lead, plug leads, ignition leads Available in Black or Red Price per Metre 19/.30mm Copper Black PVC Ignition Cable - HT lead,...

fkkey53-A4
£1.75 (£2.10 inc VAT)
OEM: 318341, PRS8
Ignition Key - Spade Type - 318341, PRS8 For the Lucas PRS8 Switch Spare key Made from Stainless Steel Made in England OEM: 318341, PRS8
+

fkkey56-A4
£1.75 (£2.10 inc VAT)
OEM: 54336176, 88SA
Ignition Key - Spade Type - 54336176, 88SA For the Lucas 88SA Switch Spare key Made from Stainless Steel Made in England OEM: 54336176, 88SA
+

fkmag146-A17
£1.75 (£2.10 inc VAT)
Magneto advance cable grommet Fits over the cable, onto the magneto, for the advance/retard, to protect the magneto from oil and dust. OEM: LU454475, 454475
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.