.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Charging System

screw081H-B18
£0.45 (£0.54 inc VAT)
OEM: 70-8177, 57-4672
Contersunk Screw - Rotor Cover - 70-8177 To screw the rotor cover on the primary chaincase OEM: 70-8177, 57-4672
+

dyn4224-A17
£0.45 (£0.54 inc VAT)
OEM: 35-4224, 10345-54
Dynamo Driving Sprocket Lockwasher - BSA A7/A10 Models Circa 1947-63 + Ariel Huntmaster Flat washer - fits between the large dynamo sprocket and the...
+

wiring470-A17
£0.95 (£1.14 inc VAT)
OEM: 71-1345
Outer Alternator Wiring Grommet - Triumph and BSA Models Wiring grommet that goes around the alternator wire coming from the primary chaincase. These...
+

screw205-B18
£0.95 (£1.14 inc VAT)
OEM: 82-4129, F4129
Contersunk Screw - Rotor Cover or Tank Badge - 82-4129 To screw the rotor cover on the primary chaincase. Can also be used for Tank Badges, but my need to be...
+

washer3975-B13
£0.95 (£1.14 inc VAT)
OEM: 70-3975, 70-8224, 29-2054, E3975, E8224
Triumph/BSA Alternator Rotor Lockwasher - Singles and Twins Fits many BSA and Triumph models, singles, twins and triples - T120, T140, TR7, B25, B50, T100...
+

dyn0729-A17
£0.95 (£1.14 inc VAT)
OEM: 67-0729, 67-729, 10349-54
Dynamo Driven Sprocket Lock Washer - BSA A7/A10 Models Circa 1947-63 + Ariel Huntmaster Tab washer - secures the small dynamo driven sprocket under the...
+

nut8763-B13
£0.95 (£1.14 inc VAT)
OEM: 70-8763, E8763
Triumph Alternator Rotor Nut - T150 Trident Models Circa 1968-74 - Long Type Longer type sleeve nut used to secure the alternator rotor on the shaft....
+

washer3852-B13
£0.95 (£1.14 inc VAT)
OEM: 70-3852, E3852
Triumph Alternator Rotor Tab Washer - Unit 350/500cc Models Circa 1959-63 Crankshaft rotor lockwasher - correct fitment on 3TA, 5TA, T90 and T100 models...
+

amm-seal-01-A4
£1.25 (£1.50 inc VAT)
Ammeter O Ring Seal 1+3/4 inch For use with 1+3/4" (45mm) Ammeters Fits under the bezel to cushion the ammeter and provide a good seal that prevent...
+

wiring471-A17
£1.45 (£1.74 inc VAT)
OEM: 70-4144, 68-0209, E4144
Inner Alternator Wiring Grommet - Triumph and BSA Models Fits Triumph Unit construction models and BSA twins and singles. Wiring grommet that goes...
+

dyn404-A17
£1.45 (£1.74 inc VAT)
OEM: 463334, LU463334
Tab washer, to fit the drive end of all Lucas dynamos. OEM: 463334, LU463334
+

wiring0705-F12
£1.45 (£1.74 inc VAT)
OEM: 40-0705, 40-705, 70-8148, E8148
BSA Alternator or Contact Breaker Leads Wiring Grommet - A50, A65, B25, B50 + Bantam Models Double sided rubber grommet to secure alternator wiring, as...
+

nut1915-B13
£1.45 (£1.74 inc VAT)
OEM: 21-1915, S1915
Triumph Alternator Rotor Nut - T90, T100 and TR5T Models From 1969 Onwards To secure the alternator rotor on the shaft - correct fitment on 350/500cc...
+

washer300-B18
£1.95 (£2.34 inc VAT)
OEM: 68-0325, 68-325, 70-8043, 40-0455
BSA Alternator Rotor Lockwasher - A50, A65 Models + BSA/Triumph Unit Singles All BSA A50 and A65 models from 1962-1972 + all BSA unit singles - C15, B40,...
+

dyn8614-A17
£1.95 (£2.34 inc VAT)
OEM: 188614, LU188614
Lucas Generator Dynamo Oil Seal - E3 / E3H / E3L - 188614 Bearing oil seal to fit many E3 dynamos such as 20003,  20009, 20035, 20011, 20037. OD: 1+1/4"...
+

pin2443-A17
£1.95 (£2.34 inc VAT)
OEM: 57-2443, T2443
Triumph Ignition Timing Pointer - Unit 650cc TR6, T120 Models - Circa 1968-72 For use on 650cc models with removable alternator inspection cover....
+

dyn424-A17
£2.45 (£2.94 inc VAT)
Dynamo Field Coil Countersunk Screw Price is for one screw
+

clutch4253-B18
£2.45 (£2.94 inc VAT)
OEM: 68-3218, 60-4253, S66-1, 21-0066
BSA / Triumph Clutch Hub To Mainshaft / Alternator Rotor Woodruff Key Clutch hub to gearbox mainshaft key, prevents the clutch hub turning on the shaft....
+

nut2182-B13
£2.45 (£2.94 inc VAT)
OEM: 70-3735
Alternator Rotor Nut - Triumph T120, T140, TR7, T160 - 1971-82 To secure the alternator rotor on the shaft. Thread: 7/16" UNF - 20 TPI Longer type with...
+

dyn3119-A17
£2.45 (£2.94 inc VAT)
OEM: 70-3119, E3119
Triumph Tab Washer - Pre Unit 500/650cc Alternator Models - 1950-62 Crank drive side rotor tab washer to fit early pre-unit Triumph alternator models....
+

dyn055-A17
£2.75 (£3.30 inc VAT)
OEM: 200829
Lucas Dynamo Terminal Rubber Cover OEM: 200829
+

mag433-A17
£2.75 (£3.30 inc VAT)
OEM: LU463114, 463114
Replica Lucas Mag/Dyno Clutch Star Spring Washer Dynamo clutch star friction spring as used in many Lucas magdynos including MO1, MO1L, MN, MS etc. ID:...
+

nut3735-B13
£2.95 (£3.54 inc VAT)
OEM: 70-3735
Alternator Rotor Nut - Triumph - 70-3735 To secure the alternator rotor on the shaft. Triumph 350cc and 500cc OEM: 70-3735
+

wiring8155-A17
£3.45 (£4.14 inc VAT)
OEM: 70-8155, 41-0715, 41-715
Alternator/Contact Breaker Rubber Cable Grommet - BSA B25, B44, B50 + Triumph TR25 Models Located on the top of the inner timming cover. Length 1+3/16...
+

dyn1473-A17
£3.45 (£4.14 inc VAT)
OEM: 19-1473, 10352-54
Dynamo Driven Sprocket Castle Nut - BSA A7/A10 Models Circa 1947-63 + Ariel Huntmaster Slotted castle nut - secures the small dynamo driven sprocket....
+

wiring5872-A17
£3.75 (£4.50 inc VAT)
OEM: 70-5872, E5872
Triumph Alternator Lead Sleeve Nut / Cable Guide  - Unit 350/500/650cc Models - Circa 1965-68 Alternator lead cable guide with a BSF thread, correct...
+

bear189307
£3.95 (£4.74 inc VAT)
OEM: 189307, 189237
LUCAS E3L, E3LM, E3N, E3HM, Dynamo Generator Bearing - Drive End To fit Lucas Dynamos E3L, E3LM, E3N, E3HM OEM: 189307, 189237
+

bear189210-F4
£3.95 (£4.74 inc VAT)
OEM: 189210
LUCAS E3L, E3LM, E3N, E3HM, Dynamo Generator Bearing 189210 - Commutator End To fit Lucas Dynamos E3L, E3LM, E3N, E3HM OEM: 189210
+

dyn-bolt460-A17
£3.95 (£4.74 inc VAT)
OEM: 200227
Dynamo Through Fixing Bolt - Short Type For Lucas E3H and E3N Type Generators One bolt and nut - correct fitment on the shorter E3H and E3N type...
+

spacer4573-B13
£3.95 (£4.74 inc VAT)
OEM: 70-4573, E4573
Triumph Alternator Rotor Distance Piece / Spacer - 650cc Unit Twins Circa 1963-72 Locates between the rotor and engine sprocket. Correct fitment on T120,...
+

dyn405-split-A17
£4.75 (£5.70 inc VAT)
OEM: 188818, LU188818
Lucas Dynamo Bullet Connectors - Brass Bullet or Split Type - Pack of 6 Bullet connectors for the dynamo and voltage control box. 2 required for the...
 

nut1593-A17
£4.95 (£5.94 inc VAT)
OEM: 90-1593
BSA Bantam Alternator Stator Sleeve Nut - D10, D14 and B175 Models Hexagonal front alternator mounting sleeve nut suitable for bikes running the original...
+

fkrectifier134-A8
£5.95 (£7.14 inc VAT)
Rectifier Solid State Positive and Negative Earth 6v and 12v A rectifier converts AC to DC. This rectifier is suitable for 6V AC or 12V AC and converts the...
+

nut3117-B13
£5.95 (£7.14 inc VAT)
OEM: 70-3117, E3117
Triumph Alternator Rotor Nut - Pre Unit 5T and 6T Models Circa 1953-54 Sleeve nut used to secure the alternator rotor on the shaft. Correct fitment on...
+

nut2053-B13
£5.95 (£7.14 inc VAT)
OEM: 29-2053, 70-8146
BSA/Triumph Alternator Rotor Nut - Shouldered - C12, C15, B25, B40, B44, B50 and TR25W Models Flanged nut used to secure the alternator rotor on the...
+

bush200231-A17
£6.95 (£8.34 inc VAT)
OEM: 200231
Lucas Dynamo Commutator End Bracket Bush - E3H, E3HB and E3HM Dynamos - 200231 Brass bush - locates in the commutator end bracket/frame assembly on the...
+

dyn465-A20
£7.95 (£9.54 inc VAT)
OEM: LU200354, 200354
Lucas E3H, E3HM Dynamo Commutator End Cover With Central Hole - Bakelite Replica Lucas black bakelite dynamo end cap as fitted to E3H and E3HM dynamos....
+

nut3971-B13
£7.95 (£9.54 inc VAT)
OEM: 70-3971, E3971
Alternator Rotor Nut - Triumph T20 Tiger Cub Models From 1959 Onwards To secure the alternator rotor on the shaft. Length UH: 3/4" (19mm) OD: 9/16"...
+

dyn431-A20
£10.95 (£13.14 inc VAT)
OEM: LU200902, 200902
Replica Lucas E3L Dynamo End Cap / Cover - 5 O'Clock Wire Exit - Bottom Right Dynamo commutator end cover assembly as used on later E3L dynamos. The...
+

dyn431A-A20
£10.95 (£13.14 inc VAT)
OEM: LU200918, 200918
Replica Lucas E3L Dynamo End Cap / Cover - Wire Exit 11 O'Clock - Top Left Dynamo commutator end cover assembly as used on later E3L dynamos. The cable...
+

dyn002-L-A17
£12.45 (£14.94 inc VAT)
OEM: 200737
Pair of Genuine Lucas Dynamo Brushes - Large Type - 200737 Dynamo brush set as used on various Lucas generators including  E3L, E3LM and E3N models -...
 

dyn0721-A17
£12.45 (£14.94 inc VAT)
OEM: 67-0721, 67-721, 10344-54
Dynamo Driving Sprocket - 27T - BSA A7 and A10 Models Circa 1947-63 + Ariel Huntmaster Large dynamo drive sprocket - 27 tooth. Correct fitment on all A7...
+

fkamm023-A4
£12.95 (£15.54 inc VAT)
Motorcycle Ammeter Plain White Dial 1+3/4" Universal Ammeters: White Dial with Chrome Bezel 1+3/4 inch (45mm) diameter including bezel 1+5/8 inch...
+

fkamm008-A4
£16.95 (£20.34 inc VAT)
Motorcycle Ammeter 8-0-8 White Dial 1+3/4" Universal Ammeters: White Dial with Chrome Bezel 1+3/4 inch (45mm) diameter including bezel 1+5/8 inch...
+

EW-cap-pp12
£16.95 (£20.34 inc VAT)
OEM: PP12
Electrex World 12v Power Pack Capacitor - DC Output Suitable For Lighting - PP12 Maintenance free 12v capacitor assembly to replace an existing battery....
+

cam0446-B13
£16.95 (£20.34 inc VAT)
OEM: 19-0446, 19-446, S4058
BSA Contact Breaker Points Cam - Bantam D10, D14, B175 and Bushman Models Locates in the contact breaker plate to open and close the points on the Wipac...
+

fkamm002-A4
£17.95 (£21.54 inc VAT)
Motorcycle Ammeter 8-0-8 Black Dial 1+3/4" Universal Ammeters: Black Dial with Chrome Bezel 1+3/4 inch (45mm) diameter including bezel 1+5/8 inch (41mm)...
+

dyn200290-pair-A17
£17.95 (£21.54 inc VAT)
OEM: 200290, LU200290
E3H Dynamo Brushes - Pair - 40W Early Type - 200290 Pair of dynamo brushes to fit E3H, E3AR, E3HB, E3HM generators. Small Type. Length: 17/32"...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.