.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Electrical

screw081H-B18
£0.45 (£0.54 inc VAT)
OEM: 70-8177, 57-4672
Contersunk Screw - Rotor Cover - 70-8177 To screw the rotor cover on the primary chaincase OEM: 70-8177, 57-4672
+

dyn4224-A17
£0.45 (£0.54 inc VAT)
OEM: 35-4224, 10345-54
Dynamo Driving Sprocket Lockwasher - BSA A7/A10 Models Circa 1947-63 + Ariel Huntmaster Flat washer - fits between the large dynamo sprocket and the...
+

nut4503-A4
£0.45 (£0.54 inc VAT)
OEM: 60-4503, D4503
Triumph Console / Instrument Panel Captive Spire Nut - 750cc Twins and Triples - Circa 1975-85 U type spring nut to secure the switch panel to the switch...
+

bulb206-5-A13
£0.50 (£0.60 inc VAT)
OEM: BA15D, LLB206, R5W, SBC
Bulb 6v 5w Ba15d - SBC, LLB 206 6v clear bulb, single filament bayonet type with double contact. 15mm diameter base. Also known as: BA15D, R5W, SBC
+

wire001
£0.50 (£0.60 inc VAT)
Single core PVC auto cable to BS6862. Electric Wire Electric cable suitable for 6volt or 12 volt motorcycles 14/0.30mm, 1.00mm², 8.75 amp (1mm square...

bulb382-A14-1
£0.60 (£0.72 inc VAT)
OEM: BA15S, SCC, 343, 382
Bulb 12v 21w (15cp) BA15S - SCC  - 343, 382 12v Bulb, 21w single filament, 15mm diameter base, single contact. Typical use - Indicator light.
+

bulb221-A14
£0.60 (£0.72 inc VAT)
OEM: LLB213, 7527, 221
Bulb 12v 18w BA15S - SCC  - LLB213, 7527, 221 12 volt bulb, 18 watt single filament, 15mm diameter base, single centre contact. Typical use - stop light.
+

bulb211-A14
£0.60 (£0.72 inc VAT)
OEM: BA15S, 211, LLB211, 7533
Bulb 12v 15w (15cp) BA15S - SCC  - 26mm - 211 12 volt bulb, 15 watt single filament, 15mm diameter base, single contact. Also known as LLB211, 7533...
+

wiring911
£0.65 (£0.78 inc VAT)
Distributor Cap HT Insulator Fits over the Spark plug and Ignition Coil wire, and then over the distributor cap, to prevent water ingress.
+

screw1371-A4
£0.65 (£0.78 inc VAT)
OEM: 101371, LU101371
Screw For 88SA / 63SA Light Switch Knob For use with 88SA or 63SA light switch knobs - 54330934, 54331482 Length UH: 5/16" (7.6mm) OEM: 101371, LU101371
+

wiring-term001
£0.65 (£0.78 inc VAT)
Ignition Coil/Distributor Straight Brass Terminal - Crimp On Push Fit Type Brass push in terminal for distributor coil - straight crimp on type....
+

wiring-term002
£0.65 (£0.78 inc VAT)
Ignition Coil/Distributor 90° Brass Terminal - Crimp On Push Fit Type Brass push in terminal for distributor coil - right angled crimp on type. Suitable...
+

wiring-term005
£0.65 (£0.78 inc VAT)
Ignition Coil/Distributor Straight Brass Terminal - Flat Contact Clip On Type Brass push on terminal for distributor coil - flat contact type. Clip on...
+

6vbulb7501-A13
£0.75 (£0.90 inc VAT)
Bulb 6v 21w Ba15s - 7501, 317 Single Contact Bayonet. Also Known as BA15S T4 A7501 Lucas 317
+

6vbulb293-A13
£0.75 (£0.90 inc VAT)
Bulb 6v 4w Ba9s - 3892, 293 6v Bulb, 4w Single Filament, 9mm diameter base, single contact. Also known as BA9S T2.75 200H T4W, Lucas 293, 3892
+

6vbulb282-A13
£0.75 (£0.90 inc VAT)
OEM: 3799, LLB282, Lucas 282
Bulb 6v 1.2w BA7S MCC - Single Contact, Single Filament - 282, 3799 6 volt 1.2 watt single filament, 7mm diameter base, single contact. Typical used in...
+

12vbulb233-A14
£0.75 (£0.90 inc VAT)
Bulb 12v 4w MCC Ba9s - 233 12v Bulb, 4w Single Filament, 9mm diameter base, single contact. Also known as Lucas 233
+

12vbulb281-A14-1
£0.75 (£0.90 inc VAT)
Bulb 12v 1.2w MCC BA7S - 281 12v bulb, 1.2w single filament - 7mm diameter base, single contact. Also known as Lucas 281 OEM: 99-0537
+

bulb205-A13
£0.75 (£0.90 inc VAT)
Bulb 6v 5w Ba15s - 205 6v Bulb, 5w Single Filament, 15mm diameter base, single contact. Also Known as Lucas 205
+

wire002
£0.75 (£0.90 inc VAT)
Single core PVC auto cable to BS6862. Electric Wire Electric cable suitable for 6volt or 12 volt motorcycles 28/0.30mm, 2.00mm², 17.5 amp (2mm square...

fk6vbulb287-A13
£0.75 (£0.90 inc VAT)
Bulb 6v 2w Ba9s - 287 6v Bulb, 2w Single Filament, 9mm diameter base, single contact. Also known as BA9S T2.75 200H T4W, Lucas 287
+

bulb207-A14-1
£0.75 (£0.90 inc VAT)
OEM: 207, R5W
Bulb 12v 5w Ba15s - 207 R5W 12v clear bulb, 5w single filament, 15mm diameter base, single contact.
+

screw9947-pair-A4
£0.75 (£0.90 inc VAT)
OEM: 99-9947, 99-7013
Triumph/Norton Rear Lamp Mounting Screws - Triumph 750cc, Norton Commando Pair of screws and washers for Lucas LU917 tail light lens. Triumph TR7, T140,...
+

wiring5015
£0.75 (£0.90 inc VAT)
OEM: 185015, LU185015, CYB301
Split Brass Washer For HT Lead / Distributor Cap - 185015 Diameter: 3/8" (9.92mm) Thickness: 1/32" (0.54mm) OEM:  185015, LU185015, CYB301
+

bulb244-A13
£0.75 (£0.90 inc VAT)
OEM: LLB244, 244
Bulb 6v 10w Ba15s - SCC, LLB 244 6v clear bulb, single filament bayonet type with single contact. 15mm diameter base. Also Known as  LLB244, Lucas 244
+

seal1210
£0.75 (£0.90 inc VAT)
OEM: 99-1210, 06-8043, 60-4408
Panel / Headlight Warning Light Rubber Sealing Washer - Triumph, BSA and Norton Models Square profile rubber sealing washer for all models with panel or...
+

oring5988-A4
£0.75 (£0.90 inc VAT)
OEM: 82-5988, F5988, 68-9166
Lucas 88SA Ignition or Lighting Switch Retaining Rubber Band O-Ring Used on rotary type 88SA switch assemblies - secures the harness socket to the...
+

screw0689-A4
£0.75 (£0.90 inc VAT)
OEM: 97-0689, H689
Triumph Nacelle Fitting / Handlebar Switch to Lever Clamp Screw - 4BA x 1/4" Domed head slotted screw as used on pre unit and unit models to attach the...
+

12vbulb245-A14
£0.85 (£1.02 inc VAT)
Bulb 12v 10w SCC Ba15s - 245 12v Bulb, 10w Single Filament, 15mm diameter base, single contact. Also known as Lucas 245
+

fkbb08-A14
£0.95 (£1.14 inc VAT)
Bulb 12v 21/5w SBC BAY15d - 380 12v Bulb, 21/5w Double Filament, 15mm diameter base, double contact. Typical use - Stop/Tail light. Also known as Lucas 380
+

fkbb12-A13
£0.95 (£1.14 inc VAT)
Genuine Lucas Bulb 6v 21/5w BAY15D - 1013 6v Bulb, 21W/5W Double Filament, 15mm diameter base, double contact, offset pins Typical use: Stop/Tail light...
+

fkmag112-A17
£0.95 (£1.14 inc VAT)
OEM: 06-8032, 068032
Magneto Advance/Retard Spring - 06-8032, 068032 Springs used for the Advance and Retard mechanism in the Magneto Price for ONE Spring OEM: 06-8032, 068032
+

wiring470-A17
£0.95 (£1.14 inc VAT)
OEM: 71-1345
Outer Alternator Wiring Grommet - Triumph and BSA Models Wiring grommet that goes around the alternator wire coming from the primary chaincase. These...
+

reflect-stick-A7
£0.95 (£1.14 inc VAT)
Rear Number Plate Reflector Stick-on type Simply peel off the backing and stick on the number plate
+

k2f-005-A15
£0.95 (£1.14 inc VAT)
OEM: 459005
Magneto Bearing Insulator Washer Large Used on K2F Magnetos, and others ID: 1+1/8" (29mm) OEM: 451379, 459005
+

k2f-932-A21
£0.95 (£1.14 inc VAT)
OEM: 463932
Magneto Bearing Insulator Washer Small Used on K2F Magnetos, and others ID: 1" (26mm) OEM: 463932
+

screw205-B18
£0.95 (£1.14 inc VAT)
OEM: 82-4129, F4129
Contersunk Screw - Rotor Cover or Tank Badge - 82-4129 To screw the rotor cover on the primary chaincase. Can also be used for Tank Badges, but my need to be...
+

washer3975-B13
£0.95 (£1.14 inc VAT)
OEM: 70-3975, 70-8224, 29-2054, E3975, E8224
Triumph/BSA Alternator Rotor Lockwasher - Singles and Twins Fits many BSA and Triumph models, singles, twins and triples - T120, T140, TR7, B25, B50, T100...
+

12vbulb435-A14-1
£0.95 (£1.14 inc VAT)
OEM: BAY9S, 435
Bulb 12v 23w BAY9S - 435 12v bulb, 23w single filament, 9mm diameter base, single contact. Also known as  64138,  LLB435 Used mainly for mini...
+

12vbulb270-A14-1
£0.95 (£1.14 inc VAT)
OEM: S8.5D, 270
Bulb 12v 18w S8.5D Festoon - 270 12 volt, 18 watt 15 x 44mm festoon bulb - clear glass. Also known as  6475 , LLB270. Used mainly for car number...
+

12vbulb267-A14-1
£0.95 (£1.14 inc VAT)
OEM: S8.5D, 267
Bulb 12v 15w S8.5D Festoon - 267 12 volt, 15 watt 15 x 44mm festoon bulb - clear glass. Also known as  S6414 , LLB267. Used mainly for car number...
+

12vbulb239-A14
£0.95 (£1.14 inc VAT)
OEM: S8.5D, 239
Bulb 12v 5w S8.5D Festoon - 239 12 volt, 5 watt 11 x 38mm festoon bulb - clear glass. Also known as  17125 , LLB239. Used mainly for rear number...
+

12vbulb272-A14-1
£0.95 (£1.14 inc VAT)
OEM: S8.5D, 272
Bulb 12v 10w S8.5D Festoon - 272 12 volt, 10 watt 11 x 38mm festoon bulb - clear glass. Also known as  1204/6430 , LLB272. Used mainly for car...
+

12vbulb258-A14
£0.95 (£1.14 inc VAT)
OEM: S8.5D, 258
Bulb 12v 6w S8.5D Festoon - 258 12 volt, 6 watt 11 x 42mm festoon bulb - clear glass. Also known as  LLB258. Used mainly for car number plates and...
+

wiring-term003
£0.95 (£1.14 inc VAT)
Distributor Cap 90° HT Insulator Rubber Boot Fits over the spark plug and ignition coil wire, and then over the distributor cap to prevent water ingress....
+

sw-part106-A4
£0.95 (£1.14 inc VAT)
OEM: S3857, S3858
Wipac Ducon / Tricon Switch Grub Screw Replacement grub screw with the correct thread and dimensions for use in genuine Wipac and replica Ducon and Tricon...
+

dyn0729-A17
£0.95 (£1.14 inc VAT)
OEM: 67-0729, 67-729, 10349-54
Dynamo Driven Sprocket Lock Washer - BSA A7/A10 Models Circa 1947-63 + Ariel Huntmaster Tab washer - secures the small dynamo driven sprocket under the...
+

mag-nut170104-A17
£0.95 (£1.14 inc VAT)
OEM: 170104, LU170104
Magneto Shaft Pinion Securing Nut - 3/8" BSF Plain nut to secure the sprocket on mag/dynos including K2F models. Thread: 3/8" BSF 20TPI Depth: 5/16"...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.