.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Electrical

screw081H-B18
£0.45 (£0.54 inc VAT)
OEM: 70-8177, 57-4672
Contersunk Screw - Rotor Cover - 70-8177 To screw the rotor cover on the primary chaincase OEM: 70-8177, 57-4672
+

dyn4224-A17
£0.45 (£0.54 inc VAT)
OEM: 35-4224, 10345-54
Dynamo Driving Sprocket Lockwasher - BSA A7/A10 Models Circa 1947-63 + Ariel Huntmaster Flat washer - fits between the large dynamo sprocket and the...
+

nut4503-A4
£0.45 (£0.54 inc VAT)
OEM: 60-4503, D4503
Triumph Console / Instrument Panel Captive Spire Nut - 750cc Twins and Triples - Circa 1975-85 U type spring nut to secure the switch panel to the switch...
+

bulb206-5-A13
£0.50 (£0.60 inc VAT)
OEM: BA15D, LLB206, R5W, SBC
Bulb 6v 5w Ba15d - SBC, LLB 206 6v clear bulb, single filament bayonet type with double contact. 15mm diameter base. Also known as: BA15D, R5W, SBC
+

wire001
£0.50 (£0.60 inc VAT)
Single core PVC auto cable to BS6862. Electric Wire Electric cable suitable for 6volt or 12 volt motorcycles 14/0.30mm, 1.00mm², 8.75 amp (1mm square...

bulb382-A14-1
£0.60 (£0.72 inc VAT)
OEM: BA15S, SCC, 343, 382
Bulb 12v 21w (15cp) BA15S - SCC  - 343, 382 12v Bulb, 21w single filament, 15mm diameter base, single contact. Typical use - Indicator light.
+

bulb221-A14
£0.60 (£0.72 inc VAT)
OEM: LLB213, 7527, 221
Bulb 12v 18w BA15S - SCC  - LLB213, 7527, 221 12 volt bulb, 18 watt single filament, 15mm diameter base, single centre contact. Typical use - stop light.
+

bulb211-A14
£0.60 (£0.72 inc VAT)
OEM: BA15S, 211, LLB211, 7533
Bulb 12v 15w (15cp) BA15S - SCC  - 26mm - 211 12 volt bulb, 15 watt single filament, 15mm diameter base, single contact. Also known as LLB211, 7533...
+

wiring911
£0.65 (£0.78 inc VAT)
Distributor Cap HT Insulator Fits over the Spark plug and Ignition Coil wire, and then over the distributor cap, to prevent water ingress.
+

screw1371-A4
£0.65 (£0.78 inc VAT)
OEM: 101371, LU101371
Screw For 88SA / 63SA Light Switch Knob For use with 88SA or 63SA light switch knobs - 54330934, 54331482 Length UH: 5/16" (7.6mm) OEM: 101371, LU101371
+

wiring-term001
£0.65 (£0.78 inc VAT)
Ignition Coil/Distributor Straight Brass Terminal - Crimp On Push Fit Type Brass push in terminal for distributor coil - straight crimp on type....
+

wiring-term002
£0.65 (£0.78 inc VAT)
Ignition Coil/Distributor 90° Brass Terminal - Crimp On Push Fit Type Brass push in terminal for distributor coil - right angled crimp on type. Suitable...
+

wiring-term005
£0.65 (£0.78 inc VAT)
Ignition Coil/Distributor Straight Brass Terminal - Flat Contact Clip On Type Brass push on terminal for distributor coil - flat contact type. Clip on...
+

6vbulb7501-A13
£0.75 (£0.90 inc VAT)
Bulb 6v 21w Ba15s - 7501, 317 Single Contact Bayonet. Also Known as BA15S T4 A7501 Lucas 317
+

6vbulb293-A13
£0.75 (£0.90 inc VAT)
Bulb 6v 4w Ba9s - 3892, 293 6v Bulb, 4w Single Filament, 9mm diameter base, single contact. Also known as BA9S T2.75 200H T4W, Lucas 293, 3892
+

6vbulb282-A13
£0.75 (£0.90 inc VAT)
OEM: 3799, LLB282, Lucas 282
Bulb 6v 1.2w BA7S MCC - Single Contact, Single Filament - 282, 3799 6 volt 1.2 watt single filament, 7mm diameter base, single contact. Typical used in...
+

12vbulb233-A14
£0.75 (£0.90 inc VAT)
Bulb 12v 4w MCC Ba9s - 233 12v Bulb, 4w Single Filament, 9mm diameter base, single contact. Also known as Lucas 233
+

12vbulb281-A14-1
£0.75 (£0.90 inc VAT)
Bulb 12v 1.2w MCC BA7S - 281 12v bulb, 1.2w single filament - 7mm diameter base, single contact. Also known as Lucas 281 OEM: 99-0537
+

bulb205-A13
£0.75 (£0.90 inc VAT)
Bulb 6v 5w Ba15s - 205 6v Bulb, 5w Single Filament, 15mm diameter base, single contact. Also Known as Lucas 205
+

wire002
£0.75 (£0.90 inc VAT)
Single core PVC auto cable to BS6862. Electric Wire Electric cable suitable for 6volt or 12 volt motorcycles 28/0.30mm, 2.00mm², 17.5 amp (2mm square...

fk6vbulb287-A13
£0.75 (£0.90 inc VAT)
Bulb 6v 2w Ba9s - 287 6v Bulb, 2w Single Filament, 9mm diameter base, single contact. Also known as BA9S T2.75 200H T4W, Lucas 287
+

bulb207-A14-1
£0.75 (£0.90 inc VAT)
OEM: 207, R5W
Bulb 12v 5w Ba15s - 207 R5W 12v clear bulb, 5w single filament, 15mm diameter base, single contact.
+

screw9947-pair-A4
£0.75 (£0.90 inc VAT)
OEM: 99-9947, 99-7013
Triumph/Norton Rear Lamp Mounting Screws - Triumph 750cc, Norton Commando Pair of screws and washers for Lucas LU917 tail light lens. Triumph TR7, T140,...
+

wiring5015
£0.75 (£0.90 inc VAT)
OEM: 185015, LU185015, CYB301
Split Brass Washer For HT Lead / Distributor Cap - 185015 Diameter: 3/8" (9.92mm) Thickness: 1/32" (0.54mm) OEM:  185015, LU185015, CYB301
+

bulb244-A13
£0.75 (£0.90 inc VAT)
OEM: LLB244, 244
Bulb 6v 10w Ba15s - SCC, LLB 244 6v clear bulb, single filament bayonet type with single contact. 15mm diameter base. Also Known as  LLB244, Lucas 244
+

seal1210
£0.75 (£0.90 inc VAT)
OEM: 99-1210, 06-8043, 60-4408
Panel / Headlight Warning Light Rubber Sealing Washer - Triumph, BSA and Norton Models Square profile rubber sealing washer for all models with panel or...
+

oring5988-A4
£0.75 (£0.90 inc VAT)
OEM: 82-5988, F5988, 68-9166
Lucas 88SA Ignition or Lighting Switch Retaining Rubber Band O-Ring Used on rotary type 88SA switch assemblies - secures the harness socket to the...
+

screw0689-A4
£0.75 (£0.90 inc VAT)
OEM: 97-0689, H689
Triumph Nacelle Fitting / Handlebar Switch to Lever Clamp Screw - 4BA x 1/4" Domed head slotted screw as used on pre unit and unit models to attach the...
+

12vbulb245-A14
£0.85 (£1.02 inc VAT)
Bulb 12v 10w SCC Ba15s - 245 12v Bulb, 10w Single Filament, 15mm diameter base, single contact. Also known as Lucas 245
+

fkbb08-A14
£0.95 (£1.14 inc VAT)
Bulb 12v 21/5w SBC BAY15d - 380 12v Bulb, 21/5w Double Filament, 15mm diameter base, double contact. Typical use - Stop/Tail light. Also known as Lucas 380
+

fkbb12-A13
£0.95 (£1.14 inc VAT)
Genuine Lucas Bulb 6v 21/5w BAY15D - 1013 6v Bulb, 21W/5W Double Filament, 15mm diameter base, double contact, offset pins Typical use: Stop/Tail light...
+

fkmag112-A17
£0.95 (£1.14 inc VAT)
OEM: 06-8032, 068032
Magneto Advance/Retard Spring - 06-8032, 068032 Springs used for the Advance and Retard mechanism in the Magneto Price for ONE Spring OEM: 06-8032, 068032
+

wiring470-A17
£0.95 (£1.14 inc VAT)
OEM: 71-1345
Outer Alternator Wiring Grommet - Triumph and BSA Models Wiring grommet that goes around the alternator wire coming from the primary chaincase. These...
+

reflect-stick-A7
£0.95 (£1.14 inc VAT)
Rear Number Plate Reflector Stick-on type Simply peel off the backing and stick on the number plate
+

k2f-005-A15
£0.95 (£1.14 inc VAT)
OEM: 459005
Magneto Bearing Insulator Washer Large Used on K2F Magnetos, and others ID: 1+1/8" (29mm) OEM: 451379, 459005
+

k2f-932-A21
£0.95 (£1.14 inc VAT)
OEM: 463932
Magneto Bearing Insulator Washer Small Used on K2F Magnetos, and others ID: 1" (26mm) OEM: 463932
+

screw205-B18
£0.95 (£1.14 inc VAT)
OEM: 82-4129, F4129
Contersunk Screw - Rotor Cover or Tank Badge - 82-4129 To screw the rotor cover on the primary chaincase. Can also be used for Tank Badges, but my need to be...
+

washer3975-B13
£0.95 (£1.14 inc VAT)
OEM: 70-3975, 70-8224, 29-2054, E3975, E8224
Triumph/BSA Alternator Rotor Lockwasher - Singles and Twins Fits many BSA and Triumph models, singles, twins and triples - T120, T140, TR7, B25, B50, T100...
+

12vbulb435-A14-1
£0.95 (£1.14 inc VAT)
OEM: BAY9S, 435
Bulb 12v 23w BAY9S - 435 12v bulb, 23w single filament, 9mm diameter base, single contact. Also known as  64138,  LLB435 Used mainly for mini...
+

12vbulb270-A14-1
£0.95 (£1.14 inc VAT)
OEM: S8.5D, 270
Bulb 12v 18w S8.5D Festoon - 270 12 volt, 18 watt 15 x 44mm festoon bulb - clear glass. Also known as  6475 , LLB270. Used mainly for car number...
+

12vbulb267-A14-1
£0.95 (£1.14 inc VAT)
OEM: S8.5D, 267
Bulb 12v 15w S8.5D Festoon - 267 12 volt, 15 watt 15 x 44mm festoon bulb - clear glass. Also known as  S6414 , LLB267. Used mainly for car number...
+

12vbulb239-A14
£0.95 (£1.14 inc VAT)
OEM: S8.5D, 239
Bulb 12v 5w S8.5D Festoon - 239 12 volt, 5 watt 11 x 38mm festoon bulb - clear glass. Also known as  17125 , LLB239. Used mainly for rear number...
+

12vbulb272-A14-1
£0.95 (£1.14 inc VAT)
OEM: S8.5D, 272
Bulb 12v 10w S8.5D Festoon - 272 12 volt, 10 watt 11 x 38mm festoon bulb - clear glass. Also known as  1204/6430 , LLB272. Used mainly for car...
+

12vbulb258-A14
£0.95 (£1.14 inc VAT)
OEM: S8.5D, 258
Bulb 12v 6w S8.5D Festoon - 258 12 volt, 6 watt 11 x 42mm festoon bulb - clear glass. Also known as  LLB258. Used mainly for car number plates and...
+

wiring-term003
£0.95 (£1.14 inc VAT)
Distributor Cap 90° HT Insulator Rubber Boot Fits over the spark plug and ignition coil wire, and then over the distributor cap to prevent water ingress....
+

sw-part106-A4
£0.95 (£1.14 inc VAT)
OEM: S3857, S3858
Wipac Ducon / Tricon Switch Grub Screw Replacement grub screw with the correct thread and dimensions for use in genuine Wipac and replica Ducon and Tricon...
+

dyn0729-A17
£0.95 (£1.14 inc VAT)
OEM: 67-0729, 67-729, 10349-54
Dynamo Driven Sprocket Lock Washer - BSA A7/A10 Models Circa 1947-63 + Ariel Huntmaster Tab washer - secures the small dynamo driven sprocket under the...
+

mag-nut170104-A17
£0.95 (£1.14 inc VAT)
OEM: 170104, LU170104
Magneto Shaft Pinion Securing Nut - 3/8" BSF Plain nut to secure the sprocket on mag/dynos including K2F models. Thread: 3/8" BSF 20TPI Depth: 5/16"...
+

nut8763-B13
£0.95 (£1.14 inc VAT)
OEM: 70-8763, E8763
Triumph Alternator Rotor Nut - T150 Trident Models Circa 1968-74 - Long Type Longer type sleeve nut used to secure the alternator rotor on the shaft....
+

grom5466-A15
£0.95 (£1.14 inc VAT)
OEM: 82-5466, F5466
Triumph Coil Mounting Rubber Grommet - Unit 350/500/650cc Twins Circa 1963-69 Rubber grommet - locates between the two spacers over the the coil mounting...
+

washer3852-B13
£0.95 (£1.14 inc VAT)
OEM: 70-3852, E3852
Triumph Alternator Rotor Tab Washer - Unit 350/500cc Models Circa 1959-63 Crankshaft rotor lockwasher - correct fitment on 3TA, 5TA, T90 and T100 models...
+

12vbulb-284-A14-1
£0.99 (£1.19 inc VAT)
OEM: 284, 2723
12v 2.3W Small Wedge Fitting Bulb Panel indicator bulbs, push fit, wedge type. Approx 18mm x 5mm, capless, 2mm push fit. OEM: 284, 2723
+

rubb779-A4
£1.25 (£1.50 inc VAT)
OEM: 97-2209, 70-7554, 71-2209
Triumph Headlight Mounting Grommet Various models from 1973 onwards. OEM: 97-2209, 70-7554, 71-2209
+

gask766
£1.25 (£1.50 inc VAT)
Magneto Triangle Gasket Suit most 3 bolt fixing Magnetos, such as AJS, Matchless, and other K2f magnetos OEM: 67-1258
+

12vbulb504-A14-1
£1.25 (£1.50 inc VAT)
OEM: 504, 2821
12v 3W Wedge Fitting Bulb Panel indicator bulbs, 2mm push fit, capless wedge type. W2.1x9d Overall length: 24mm Diameter: 9.5mm OEM: 504, 2821
+

amm-seal-01-A4
£1.25 (£1.50 inc VAT)
Ammeter O Ring Seal 1+3/4 inch For use with 1+3/4" (45mm) Ammeters Fits under the bezel to cushion the ammeter and provide a good seal that prevent...
+

sw/cover2086-A4
£1.25 (£1.50 inc VAT)
OEM: 60-2086, D2086
Front Brake Cable Stop Switch Cover - Triumph/BSA/Norton Models Circa 1968-74 Rubber sleeve used to cover the In-line front brake cable switch as used on...
+

wiring375
£1.35 (£1.62 inc VAT)
Red Battery Terminal Insulator Cover Red rubber battery terminal cover, to protect against short circuit. Approx size: Wire hole 8mm, Terminal hole 17mm
+

wiring370
£1.35 (£1.62 inc VAT)
Black Battery Terminal Insulator Cover Black rubber battery terminal cover, to protect against short circuit. Terminal rubber boot Approx size: Wire hole...
+

fkwiring447
£1.45 (£1.74 inc VAT)
Clear Insulator Sleeve For 6.3mm Spade Terminal. Supplied in pack of 10
+

wiring471-A17
£1.45 (£1.74 inc VAT)
OEM: 70-4144, 68-0209, E4144
Inner Alternator Wiring Grommet - Triumph and BSA Models Fits Triumph Unit construction models and BSA twins and singles. Wiring grommet that goes...
+

term102
£1.45 (£1.74 inc VAT)
5.30mm Ring Terminal For .5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term113
£1.45 (£1.74 inc VAT)
6.30mm Blade Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term126
£1.45 (£1.74 inc VAT)
6.30mm Blade Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term106
£1.45 (£1.74 inc VAT)
5.30mm Ring Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term117
£1.45 (£1.74 inc VAT)
6.30mm Push-On Spade Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term109
£1.45 (£1.74 inc VAT)
6.30mm Push-On Spade Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term122
£1.45 (£1.74 inc VAT)
6.40mm Ring Terminal For 3.0mm - 6.00mm Cable. (for 3.0-6.0mm square cable) Supplied in pack of 10
+

term127
£1.45 (£1.74 inc VAT)
6.30mm Insulated Push-On Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

dyn404-A17
£1.45 (£1.74 inc VAT)
OEM: 463334, LU463334
Tab washer, to fit the drive end of all Lucas dynamos. OEM: 463334, LU463334
+

term136
£1.45 (£1.74 inc VAT)
4.00mm Insulated Nipple Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term132
£1.45 (£1.74 inc VAT)
5.00mm Insulated Nipple Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term108
£1.45 (£1.74 inc VAT)
5.30mm Insulated Fork Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term135
£1.45 (£1.74 inc VAT)
4.00mm Insulated Receptacle Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term131
£1.45 (£1.74 inc VAT)
5.00mm Insulated Receptacle Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term104
£1.45 (£1.74 inc VAT)
5.30mm Insulated Fork Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

bulb987-A14-1
£1.45 (£1.74 inc VAT)
OEM: MES/E10, LLB987
Bulb 12v 2.2w MES/E10 - Lucas No. LLB987 12v clear bulb, 2.2w single filament screw in type, 11mm diameter base, single contact.
+

grom4707-A17
£1.45 (£1.74 inc VAT)
OEM: 70-4707, E4707
Triumph/BSA Contact Breaker Points Lead Wire Grommet - Various Models Points wire sealing grommet as used on BSA and Triumph twins from 1963 onwards....
+

wiring-term004
£1.45 (£1.74 inc VAT)
Bosch Type Distributor Terminal - Straight Stainless Steel - Crimp On Push Fit Type Stainless steel HT terminal to suit Bosch distributor caps with 4mm...
+

boot9011-F12
£1.45 (£1.74 inc VAT)
OEM: 54949011, 458658, 421554, 19-0865, 99-0643
Lucas Type Coil / HT Lead Cover Rubber Boot Rubber grommet / shroud as used on standard Lucas 6v and 12v coils. Grooved internal edge to ensure secure...
+

wiring0705-F12
£1.45 (£1.74 inc VAT)
OEM: 40-0705, 40-705, 70-8148, E8148
BSA Alternator or Contact Breaker Leads Wiring Grommet - A50, A65, B25, B50 + Bantam Models Double sided rubber grommet to secure alternator wiring, as...
+

sw-part5413-A4
£1.45 (£1.74 inc VAT)
OEM: 82-5413, F5413
Triumph Brake Light Switch Lever D Washer - 650cc Models 1964-70 + 350/500cc From 1968 Onwards Brake rod to stop light switch lever D washer - correct...
+

term125
£1.45 (£1.74 inc VAT)
10.50mm Ring Terminal For 3.0mm - 6.00mm Cable. 10.5mm hole. (for 3.0-6.0mm square cable) Electric wire connectors Supplied in pack of 5
+

6vbulb253-A13
£1.45 (£1.74 inc VAT)
OEM: S8.5D, 253, LLB253
6v Festoon Bulb - 5w S8.5D - 253 6 volt, 5 watt clear glass festoon bulb with single filament. 38mm long with 11mm diameter glass tube and 8.5mm diameter...
+

nut1915-B13
£1.45 (£1.74 inc VAT)
OEM: 21-1915, S1915
Triumph Alternator Rotor Nut - T90, T100 and TR5T Models From 1969 Onwards To secure the alternator rotor on the shaft - correct fitment on 350/500cc...
+

term141
£1.55 (£1.86 inc VAT)
6.30mm Insulated Push-On Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term121T
£1.55 (£1.86 inc VAT)
6.40mm Ring Terminal For 1.5mm - 2.5mm Cable Supplied in pack of 10 (for 1.5-2.5mm square cable)
+

fkcap020-A23
£1.65 (£1.98 inc VAT)
Spark Plug Caps - Rubber - Non Resistor Non resistor. Plain rubber spark plug cap. HT lead screws into the end and secured by clip. Recommended for...
+

fkwiring531
£1.65 (£1.98 inc VAT)
6.3mm Flag Connector, Insulator. Supplied in pack of 10
+

term112
£1.65 (£1.98 inc VAT)
8.40mm Ring Terminal For 3.0mm - 6.00mm Cable. 8.4mm hole. (for 3.0-6.0mm square cable) Electric wire connectors Supplied in pack of 5
+

12vbulb501-A14-1
£1.75 (£2.10 inc VAT)
Bulb 12v 5w T10 Push-fit Wedge - 501
+

fkhtcab
£1.75 (£2.10 inc VAT)
Spark Plug H.T. Cable HT lead, plug leads, ignition leads Available in Black or Red Price per Metre 19/.30mm Copper Black PVC Ignition Cable - HT lead,...

fkkey53-A4
£1.75 (£2.10 inc VAT)
OEM: 318341, PRS8
Ignition Key - Spade Type - 318341, PRS8 For the Lucas PRS8 Switch Spare key Made from Stainless Steel Made in England OEM: 318341, PRS8
+

fkkey56-A4
£1.75 (£2.10 inc VAT)
OEM: 54336176, 88SA
Ignition Key - Spade Type - 54336176, 88SA For the Lucas 88SA Switch Spare key Made from Stainless Steel Made in England OEM: 54336176, 88SA
+

fkmag146-A17
£1.75 (£2.10 inc VAT)
Magneto advance cable grommet Fits over the cable, onto the magneto, for the advance/retard, to protect the magneto from oil and dust. OEM: LU454475, 454475
+

wire207
£1.75 (£2.10 inc VAT)
Black PVC sleeving for use on electrical harnesses Protects cables against chafing ID: 7mm Price is per METRE of sleeve.
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.