.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Control Parts

fkgrip011-E17
£5.95 (£7.14 inc VAT)
OEM: 46075-017,46061-012
Classic Kawasaki Handlebar Grips Pair of Black Replacement Classic Kawasaki OEM style Handlebar Grips. Closed End. Fits numerous models from the 1960's and...
+

fkbarhon026
£31.95 (£38.34 inc VAT)
OEM: 53100-377-000
Handlebars - Honda CB400F Models from 1975-76 + Universal Use These handlebars are dimpled for internal wiring Chrome plated OEM: 53100-377-000...
+

speedcablesmith1-F14
£15.95 (£19.14 inc VAT)
Speedo Cable - Smiths Speedometer - old fitting type Rear Wheel Length: 54" To fit speedo head thread of 11/16" (18mm) diameter. Available as 54" long
+

fkbar123
£27.95 (£33.54 inc VAT)
OEM: 97-4252
BSA Handlebars - USA Spec A75 Rocket 3  Circa 1969-71 Diameter: 7/8" OEM: 97-4252 Please note this item may attract a higher rate of shipping,...
+

fklev057-E14
£4.95 (£5.94 inc VAT)
OEM: 29-8832
BSA - Clutch Lever Blade - Left Hand - Bantam, C15 and B40 Models Chrome lever blade to fit BSA welded lug handlebars. Requires an M6 (6mm) threaded...
+

fklev058-E14
£4.95 (£5.94 inc VAT)
OEM: 29-8812
BSA - Brake Lever Blade - Right Hand - Bantam, C15 and B40 Models Chrome lever blade to fit BSA welded lug handlebars. Requires an M6 (6mm) threaded...
+

fkbar008
£31.95 (£38.34 inc VAT)
Handle Bars Cafe Racer - Clubman Type Drop bars Chrome Universal 1" Handlebar,Senior Ace, Deep. Width 27.5" Centre 6.5" Pullback 4.5" Rise 4.75"...
+

fkbar181
£29.95 (£35.94 inc VAT)
OEM: 97-1872
Triumph Handlebars - UK Spec T90 / T100 Models Pre 1967 - 97-1872 Chrome plated. Handlebar Diameter : 7/8" Has 2 small holes on one side 7" in...
+

cable614
£14.95 (£17.94 inc VAT)
OEM: 60-3557, 60-3075
Front Brake Cable Triumph/BSA - B25, B50, A65, Rocket 3, T120, TR6, T25 - with Brake Switch Front Brake Cable BSA B25SS Gold star (1971), B50SS Gold star...
+

cable413
£6.95 (£8.34 inc VAT)
OEM: 60-4128
Triumph Air Choke Cable for Triumph - T140V Bonneville (1973-81) Outer Length: 6" Inner Length: 9.5" Tube type nipple Mid adjuster in cable OEM: 60-4128
+

knob899-G15
£5.95 (£7.14 inc VAT)
OEM: 99-0176
Smith's Magnetic Speedometer Reset Knob Replica Smiths Trip reset knob to suit 3" magnetic gauges installed on most British motorcycles after 1964...
+

cab-slotted-std-E12
£3.45 (£4.14 inc VAT)
OEM: 18/880
Barrel Type Slotted Nipple - Outside Diameter 3/8" - Standard Suitable for use with standard pre-made cables fitted with a 3/16" pear nipple. Typically...
+

cable547
£14.45 (£17.34 inc VAT)
OEM: 06-2491
Norton - Commando/Roadster/SS/Fastback (1971-74). Supplied with in-line brake switch. Outer Cable: 37" approx Inner Cable: 44" approx OEM: 062491, 06-2491
+

rubber907-E12
£1.95 (£2.34 inc VAT)
OEM: 97-0669, H669
Handlebar Rubber Grommet - Triumph Nacelle Type As fitted on Triumph 3TA/5TA models etc Sold each (1) OEM: 97-0669, H669
+

tacho-80-F14
£61.95 (£74.34 inc VAT)
OEM: RSM3003/14
Tachometer Head, Black Face (1971-72), With Bulb & Socket Holder. Drive ratio 3-1. As fitted to BSA A50/A65's etc Original Smiths number: RSM3003/14
+

speedo-76-MPH_F14
£69.95 (£83.94 inc VAT)
OEM: 60-2394
Speedometer Head , Black Face (1970-78) With Bulb & Socket Holder Drive Ratio 1.25-1/ 15-12. MPH OEM: 60-2394
 

cable096
£7.95 (£9.54 inc VAT)
OEM: 68-8540
BSA Throttle Cable - BSA A50 Royal Star (1965-66) To suit BSA A50 Royal Star (1965-66) Outer Length: 35" Inner Length: 38" 3/16 x 1/8" Drum type nipple...
+

cable133
£6.95 (£8.34 inc VAT)
OEM: 60-0815
BSA Air/Choke Control Cable - A65T Thunderbolt (1968-72). Outer Length: 37" Inner Length: 41" 3/16" x 1/8" drum nipple OEM: 60-0815
+

cable379
£5.95 (£7.14 inc VAT)
OEM: 60-0684
Triumph Air/Choke Control Cable - Triumph - T120 Bonneville/T120R/T120V/T120TT (1968-73) short. Outer Length: 18" Inner Length: 22" Adjuster in cable...
+

cable780
£6.95 (£8.34 inc VAT)
OEM: 66-8910
BSA Air/Choke Control Cable - M20/M21 Side Valve models (1949-55) Outer Length: 33" Inner Length: 38" 3/16" x 1/8" drum nipple OEM: 66-8910
+

cable144
£6.95 (£8.34 inc VAT)
OEM: 60-0747
Triumph Air/Choke Control Cable - TR6S/S (1968), TR6C Trophy & TR6R Tiger (1971-73) Outer Length: 39" Inner Length: 44" Adjuster in cable OEM: 60-0747
+

cable073
£6.95 (£8.34 inc VAT)
OEM: 60-1824, 60-3270
Triumph Air/Choke Control Cable - T90/T100S/S (1968+), Triumph T100C Trophy (1968-71) Outer Length: 40" Inner Length: 45" 3/16" x 1/8" Drum nipple OEM:...
+

cable077
£7.95 (£9.54 inc VAT)
OEM: 60-0383
Triumph Throttle Cable 3TA/5TA/T100A Angled sleeve (1957-63). Outer length: 34" Inner length: 39" Adjuster in cable Angled sleeve at twistgip end 3/16" x...
+

cable378
£6.95 (£8.34 inc VAT)
OEM: 60-0745
Triumph Air/Choke Control Cable - T100R/T100T (1968+) short, T100R Daytona (1968-73) short. Outer Length: 11" Inner Length: 13.5" Adjuster in cable OEM:...
+

bar1484
£31.95 (£38.34 inc VAT)
OEM: 97-1484
Handle Bars Triumph TR6, T120 Unit, Low bar 1963-70 Chrome plated Handlebar Diameter : 7/8" Knurled centre fixing areas British made and true to the...
+

cable396
£6.95 (£8.34 inc VAT)
OEM: 60-4194
Triumph Choke/Air Cable TR7 (UK and USA Specification (1973-79), TR7T Tiger Trail (1982). Outer length: 12" Inner length: 16" Adjuster in cable 3/16" x 1/8"...
+

cable157
£7.95 (£9.54 inc VAT)
OEM: 60-1806
Triumph Throttle Cable 5T/6T/T110/TR6S (1968 on), TR7RV Tiger USA (1973-77). Outer length: 46" Inner length: 49" Adjuster in cable 3/16" x 1/8" barrel...
+

cable005
£6.95 (£8.34 inc VAT)
OEM: 90-8633
BSA Choke/Air Cable -D14/4 Bantam (1967-68). Outer length: 26" Inner length: 31" OEM: 90-8633
+

cable3575
£17.95 (£21.54 inc VAT)
OEM: 043575, 04-3575
AJS Model 14CSR, Matchless G2CSR Front Brake Cable - 043575 Suitable for following: AJS Model 14CSR Matchless G2CSR Single cylinder Pear nipple at lever...
+

clevis14-1116-E12
£1.95 (£2.34 inc VAT)
Clevis Pin 1/4" x 11/16" 1/4" (6mm) diameter, 11/16" (15mm) shaft length Suitable for cable end clevis. To secure the cable end to a lever
+

bezel667-G15
£33.95 (£40.74 inc VAT)
Smiths Chronometric Speedo/Tacho Plain Chrome Bezel Kit Plain type, as fitted to BSA/Norton's etc. Replacement plain bezel for Smiths chronometric...
+

bezel668-G15
£29.95 (£35.94 inc VAT)
Smiths Chronometric Speedo/Tacho Lipped Chrome Bezel Kit As fitted to Pre-Unit Triumphs etc Replacement bezel with lipped top for Smiths chronometric...
+

bezel670-G15
£29.95 (£35.94 inc VAT)
Smiths Chrono Speedometer Chrome Bezel Crimp-on Replacement for Bezel for Smiths magnetic Speedometers and Tachometers. Internal Bezel diameter approx:...
+

bezel669-G15
£29.95 (£35.94 inc VAT)
Smiths Chrono Speedometer Chrome Bezel Screw-on Replacement threaded Bezel kit for Smiths Chronometric Speedometers and Tachometers. Screw on chromed...
+

cable107
£7.95 (£9.54 inc VAT)
OEM: 68-8703
BSA Air Cable for A50R Royal Star (1965-67) and for 376 Amal Monobloc carburettors Outer Length: Inner Length: OEM: 68-8703
+

cable664
£8.95 (£10.74 inc VAT)
OEM: 68-8611, 68-8590
BSA Clutch Cable BSA -A50 Standard/A65 (1965), A50C Cyclone (1964-65), A50R Royal Star/A50W (1965-68), A65 Standard/A65H Hornet (1965-66), A65R Rocket...
+

cable312
£7.95 (£9.54 inc VAT)
OEM: 143312
Throttle Cable Royal Enfield India Throttle Cable 06/99 onwards, 350cc & 500cc. Outer Length: 38" Inner Length: 42+1/4" 3/16" Barrel nipple OEM: 143312
+

barclamp305-E12
£18.95 (£22.74 inc VAT)
OEM: 97-2655, 65-5333
BSA Pair of Handlebar Mounting Clamps - A, B, C and M Group + Bantam Models BSA Bantam D1/D3 (Top clamp only), Bantam D5/D7/D10/D14, C10/C11/C12/C15/B25,...

barbolt306-E12
£4.45 (£5.34 inc VAT)
OEM: 65-5334, 68-5056, 97-2656
BSA, Triumph Handlebar Mounting Bolt - 65-5334, 68-5056, 97-2656 Handlebar Clamp Bolt to fit: BSA - A/B/M Models including DBD34, A50/A65 (1963-70),...

cab-nip709-E12
£1.25 (£1.50 inc VAT)
Barrel type solderless cable nipple - 11/32 inch (9mm) Barrel type solderless cable nipple Barrel Length excluding bolt: 5/8" (16mm), Diameter: 11/32"...
+

cab-nip613
£1.25 (£1.50 inc VAT)
Barrel Type Solderless Cable Nipple - 3/8" Outside Diameter OD: 3/8" (8.8mm) Length excluding threaded screw: 7/16" (11mm) Overall length: 9/16"  (14.3mm)...
+

cab-nip706-E12
£0.75 (£0.90 inc VAT)
Barrel type solderless cable nipple - 1/4 inch (6mm) Barrel type solderless cable nipple Barrel Length excluding screw: 5/16" (8mm), Diameter: 1/4" (6mm)...
+

cab-nip708
£1.95 (£2.34 inc VAT)
Barrel type Solderless Cable Nipple - 5/16" (8mm) Barrel Length: 3/8" (10mm), OD: 5/16" (8mm) Cable hole: 2.5mm Feed the cable through the hole and...
+

cab-nip101-E12
£0.95 (£1.14 inc VAT)
Split / Slotted Barrel Nipple - 5/16" (8mm) Outside Diameter Suitable for some clutch and brake levers - for use with cables with a pear nipple end...
+

cab-nip700-E12
£1.95 (£2.34 inc VAT)
Pear type solderless cable nipple - 1/4" (7mm) Pear type solderless cable nipple, feed cable through and tighten screw to lock cable in place. Length:...
+

slinky-cable464
£13.95 (£16.74 inc VAT)
Universal Clutch/Brake Cable 53" Long - Slinky Glide 53" (135cm) outer case length - 63" (160cm) inner cable length - Cable size: 2mm Supplied with: #...
+

cab-pear480-E12
£0.60 (£0.72 inc VAT)
Pear type cable nipple, to fit cable No.2 or No.3 Suit No.2 or No.3 wire. Length: 3/8"(9mm), Head: 1/4"(6mm), Neck: 1/8"(3.5mm) Sold Singly. - Suit...
+

cab-pear470-E12
£0.55 (£0.66 inc VAT)
Pear type cable nipple (short) No.2 Suit No.2 wire. Length: 3/16"(5mm), Head: 1/4"(6mm), Neck: 1/8"(3.5mm) Sold Singly. - Suit various controls.
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.