.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Control Parts

tacho-81-F14
£61.95 (£74.34 inc VAT)
OEM: RSM3003/06
Tachometer Head, Grey Face (1967-70), With Bulb & Socket Holder. Drive ratio 3-1 As fitted to BSA A50/A65's etc Original Smiths number: RSM3003/06
+

fklev018-E14
£10.95 (£13.14 inc VAT)
OEM: 208PA
Brake Lever 7/8" Ball End. Replica Doherty 208PA brake lever to fit 7/8" handlebar. 1+1/16" pivot centres (pivot to cable nipple centres) Cable adjuster...
+

fklev020-E14
£15.95 (£19.14 inc VAT)
OEM: 60-2074
Triumph Type Clutch Lever 7/8" with Mirror Mounting Hole. Mirror Hole diameter: 5/16" (8mm) - plain hole, no thread. Replica Triumph clutch lever, most...
+

cable614
£14.95 (£17.94 inc VAT)
OEM: 60-3557, 60-3075
Front Brake Cable Triumph/BSA - B25, B50, A65, Rocket 3, T120, TR6, T25 - with Brake Switch Front Brake Cable BSA B25SS Gold star (1971), B50SS Gold star...
+

fkgrip047-E17
£5.95 (£7.14 inc VAT)
Rubber Handlebar Grips 1" - Pair Amal Replica Type Length = 5inch ID = 1+1/8" for throttle and 1" for other side The rubbers will measure 7/8" and 1"...
+

cable669b
£8.95 (£10.74 inc VAT)
OEM: 40-8615, 42-8775
BSA Clutch Cable Suitable for following: BSA - C25 Barracuda/B25 Starfire/Fleetstar (1968), B44 Victor/Shooting Star (1965-68). B31/B32/B33/B34 (1959 on)...
+

adj1005-E12
£2.95 (£3.54 inc VAT)
OEM: AM18/1005
Doherty Type Cable Adjuster Nut - 207 / 208PA Series Levers Groove cut through side to allow fitting after making up cable. OD: 1+19/32" (19.3mm) Depth:...
+

clipon020
£59.95 (£71.94 inc VAT)
Clip-on Handlebars - Universal Cafe Racer Type to Fit 33mm, 34mm or 35mm Diameter Fork Tubes Universal clip-on classic motorcycle handlebars, ideal for...

fkbar056
£29.95 (£35.94 inc VAT)
OEM: 97-7001
Triumph Handlebars - USA Spec T140/TR7 Models Tip to Tip: 28" Diameter: 7/8" Handles rake back 6" from centre Bar lift 8" from centre Knurled centre...
 

fkcab26-E12
£0.60 (£0.72 inc VAT)
Pear type cable nipple No.2 Suit no.2 wire. Length: 5/16"(8mm), Head: 7/32"(5.5mm), Neck: 1/8"(3.5mm) Sold Singly. - Suit various controls.
+

fklev001-E14
£9.45 (£11.34 inc VAT)
OEM: 407P
Clutch Lever 7/8" Replica Doherty 407P clutch lever 7/8" fitting. 7/8" pivot centres (pivot to cable nipple centres) Takes 3/8" nipples. OEM: 407P
+

fkcab20-E12
£0.80 (£0.96 inc VAT)
Drum type cable nipple Length: 1/8"(3mm), Diameter: 1/4"(6mm) Sold Singly. - Suit some air and magneto levers and twistgips.
+

fklev058-E14
£4.95 (£5.94 inc VAT)
OEM: 29-8812
BSA - Brake Lever Blade - Right Hand - Bantam, C15 and B40 Models Chrome lever blade to fit BSA welded lug handlebars. Requires an M6 (6mm) threaded...
+

cable046
£7.95 (£9.54 inc VAT)
Throttle Cable Universal - 376 Amal Monobloc For 376 Amal monobloc carburettors, no.313/364 twistgrips. Outer Length: 36" Inner Length: 40" 1/4" Barrel...
+

speedcablesmith1-F14
£15.95 (£19.14 inc VAT)
Speedo Cable - Smiths Speedometer - old fitting type Rear Wheel Length: 54" To fit speedo head thread of 11/16" (18mm) diameter. Available as 54" long
+

fklev011-E14
£10.95 (£13.14 inc VAT)
OEM: 18/453, 205, 18/770
Decompression / Exhaust Lifter Control Lever For 7/8" Handlebars - Ball End Exhaust valve lifter / decompression lever as used on many  British bikes -...
+

fkcab10-E12
£0.40 (£0.48 inc VAT)
Cable End Ferrule No.0 Suitable for outer casing ends. Priced singly.
+

fkbar062_CP
£27.95 (£33.54 inc VAT)
OEM: 06-1046
Norton Handlebars USA Commando, Interstate and Roadster Models USA Models Chrome or Stainless Steel Tip to Tip: 32" Diameter: 7/8" Handles rake back...
 

cable3696
£16.95 (£20.34 inc VAT)
OEM: 02-3696, 023696, 67-8592
Air Cable BSA, AJS, Matchless - 02-3696, 67-8592 Suit various BSA, AJS and Matchless 1960-64 Motorcycles Fit Amal 376 Carburettor models. Outer Cable: 31"...
+

fkbar186_CP
£27.95 (£33.54 inc VAT)
OEM: NM72460, 06-7803, HB1/C
Norton Handlebars - Dominator, Atlas - Flat Type Dominator 99, Atlas 650 models Tip to Tip: 28" Diameter: 7/8" Bar lift 2+3/4" from centre Available...
 

cable674
£8.95 (£10.74 inc VAT)
OEM: 40-8612
BSA Clutch Cable Suitable for following: BSA - C15 Standard (1964-67) modified gearbox, B40 Standard (1965-66) modified gearbox. Outer length: 60" Inner...
+

hbolt2221-E12
£1.25 (£1.50 inc VAT)
OEM: 97-2221, H2221
Triumph/BSA Handlebar P Clamp Lower Cupped Washer - 500/650/750cc Models Lower cupped washer for use with handlebar eyebolt 97-1523 or 97-2291. Two...
+

cable143
£7.95 (£9.54 inc VAT)
Triumph Throttle Cable TR6S, TR6C, TR6R, TR7RV To suit Triumph - TR6S (1968), TR6C Trophy/TR6R Tiger (1971-73), TR7RV Tiger (1973-77). Outer Length: 40"...
+

fkcable105
£6.95 (£8.34 inc VAT)
Air Cable Universal - Amal Concentric 622/624/626 For Amal Concentric 622/624/626 carburettors. Outer Length: 34" Inner Length: 39" 1/4" Drum type nipple...
+

cable051
£7.95 (£9.54 inc VAT)
Throttle Cable Universal - Amal Concentric 622/624/626 For Amal concentric carburettors 622/624/626, no.313/364 twistgrips. Outer Length: 36" Inner...
+

fkbar048
£27.95 (£33.54 inc VAT)
OEM: 97-4538
Triumph Handlebars -  UK Spec T140/TR7 Models Tip to Tip: 26" Diameter: 7/8" Handles rake back 2" from centre Bar lift 3 to 6" from centre Knurled...
+

clutch046-B23
£2.95 (£3.54 inc VAT)
OEM: 57-0495, T495
Clutch Lever Rubber - Triumph - 57-0495, T495 Triumph Pre-Unit Clutch lever rubber boot. OEM: 57-0495, T495
+

knob899-G15
£5.95 (£7.14 inc VAT)
OEM: 99-0176
Smith's Magnetic Speedometer Reset Knob Replica Smiths Trip reset knob to suit 3" magnetic gauges installed on most British motorcycles after 1964...
+

cable155
£7.95 (£9.54 inc VAT)
OEM: 60-1819
Triumph Throttle Cable T120R, T120TT, T140V To suit Triumph - T120R/T120TT (1968 on), T140V Bonneville USA (1973-76) dual twist grip. Outer Length: 43"...
+

cable757
£8.95 (£10.74 inc VAT)
OEM: 60-0366
Triumph Clutch Cable Suitable for following: Triumph - 3TA/5TA/T100A (1957-62) pear nipple. Outer length: 46" Inner length: 50" Nipples: 1/4" and 3/16"...
+

cab-slotted-std-E12
£3.45 (£4.14 inc VAT)
OEM: 18/880
Barrel Type Slotted Nipple - Outside Diameter 3/8" - Standard Suitable for use with standard pre-made cables fitted with a 3/16" pear nipple. Typically...
+

cable763
£8.95 (£10.74 inc VAT)
OEM: 60-3925
Triumph Clutch Cable Suitable for following: Triumph - TR7/T140 all models USA (1973 on). Outer length: 51+1/8" Inner length: 55+3/4" Nipples: 3/8"x5/8"...
+

fklev002-E14
£9.45 (£11.34 inc VAT)
Brake Lever 7/8" Replica Doherty 407P brake lever 7/8" fitting. 7/8" pivot centres (pivot to cable nipple centres) Takes 3/8" nipples. OEM: 407P
+

fklev035-E14
£30.95 (£37.14 inc VAT)
OEM: 100/207
Brake/Air Lever 7/8" - Doherty Type Replica Doherty Type 100/207 7/8" combination Brake/Air lever, plain blade. Premium Quality lever with Brass Chrome...
+

adj1708-E12
£4.95 (£5.94 inc VAT)
OEM: 18-1708, 18-1709, 18-838, 18-839, 99-1031, 60-3585, 60-3586
Cable Adjuster and Lockring Nut - Slide In Type - Triumph, BSA and AMC Groove cut through side to allow fitting after cable made up. Total length:...
+

fkbar187
£21.95 (£26.34 inc VAT)
OEM: 90-4992
Handle Bars BSA Bantam D7, D10, D14 Tip to Tip: 22" Diameter: 7/8" Bar lift 2" from centre OEM: 90-4992 Please note this item may attract a higher rate...
+

fkbar189
£27.95 (£33.54 inc VAT)
OEM: 42-4968
Handle Bars BSA A7, A10, A65 Western Style Tip to Tip: 30" Diameter: 7/8" Handles rake back 4" from centre Bar lift 7" from centre OEM: 42-4968...
+

bulbholder679-A23
£4.45 (£5.34 inc VAT)
Speedo / Tachometer Rubber Bulb Holder and Bulb - Reproduction Smiths Type Clocks Rubber bulb holder fitted with a 12v capless wedge type bulb - two...
+

lev022-E14
£32.95 (£39.54 inc VAT)
Pair of 7/8" Ball Ended Levers Without Cable Adjusters. Premium quality chrome plate & fixing screws. Fitted as OE to Some Norton and Velocettes....
+

cable782
£7.95 (£9.54 inc VAT)
OEM: 65-8813
BSA Throttle Cable B31, B32, B33, B34, M33 To suit BSA - B31/B32/B33/B34/M33 (1957 on). Outer Length: 34" Inner Length: 37" 1/8" Barrel type nipple OEM:...
+

cable679
£8.95 (£10.74 inc VAT)
OEM: 60-2456
BSA Clutch Cable Suitable for following: BSA - A50 Royal Star (1970), A65L/A65S/A65T/A70 (1970-73). Outer length: 47" Inner length: 53" OEM: 60-2456
+

cab2270A-E12
£5.95 (£7.14 inc VAT)
OEM: 97-2270, H2270, 97-4479, H2270
Triumph/BSA Enclosed Front Cable Holder / Retainer - OIF Models Attaches to your front mudguard, the grommet type fitting clips into a hole in the...
+

cable106b
£7.95 (£9.54 inc VAT)
OEM: 60-0962, 40-8657
BSA Throttle Cable C25, B25, B44, B50 To suit BSA - C25 Barracuda (1967), B25 Starfire/Fleet Star (1967 on), B25 Starfire (1968-70), B25SS Gold Star/B25T...
+

s/cab-7-506vb
£16.45 (£19.74 inc VAT)
OEM: 19-9086, 19-9098, CLN/01
66" Magnetic Speedo Cable - BSA A50, A65 - 1966 Onwards + OIF B25, B50 Models - Venhill Armoured Suitable for various makes and models fitted with a...
 

s/cab-7-506vt
£17.45 (£20.94 inc VAT)
OEM: 60-3249, D3249, CLN/01
66" Magnetic Speedo Cable - Triumph OIF 650cc + 750cc Twins Circa 1973-78 - Venhill Armoured Suitable for various makes and models fitted with a magnetic...
 

hbolt1425-E12
£1.45 (£1.74 inc VAT)
OEM: 97-1425
Handle Bar Clamp Sleeve - BSA, Triumph Clamp spacer for use with 'P' clamp 97-2291 4 Required per set Sold each (1) OEM: 97-1425
+

cable647
£8.95 (£10.74 inc VAT)
OEM: 90-8565
BSA Clutch Cable Suitable for following: BSA - D7 Bantam Super (1958-65) Outer length: 41" Inner length: 44" OEM: 90-8565
+

twist285-E8
£29.95 (£35.94 inc VAT)
OEM: No. 71
Doherty No. 71 Twistgrip - Single Pull - 7/8" Bars Throttle assembly/twistgrip  suitable for 7/8" (22mm) handlebars. Plastic tube throttle with single...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.