.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Control Parts

tach1087-G15
£3.95 (£4.74 inc VAT)
OEM: 97-1087, H1087
Triumph Speedo/Tacho Mounting Bracket Bush - 500/650cc Duplex Models Circa 1963-64 Instrument bracket mounting metalastik bush. Mounts the twin gauges...
+

nut337-G15
£3.45 (£4.14 inc VAT)
OEM: 02-1593
AJS/Matchless Speedo Gearbox Lock Nut OEM: 02-1593
+

cab-slotted-std-E12
£3.45 (£4.14 inc VAT)
OEM: 18/880
Barrel Type Slotted Nipple - Outside Diameter 3/8" - Standard Suitable for use with standard pre-made cables fitted with a 3/16" pear nipple. Typically...
+

barbolt306-E12
£4.45 (£5.34 inc VAT)
OEM: 65-5334, 68-5056, 97-2656
BSA, Triumph Handlebar Mounting Bolt - 65-5334, 68-5056, 97-2656 Handlebar Clamp Bolt to fit: BSA - A/B/M Models including DBD34, A50/A65 (1963-70),...

cab2270B-E12
£3.45 (£4.14 inc VAT)
OEM: 97-2270, H2270, 97-4479, H4479
Triumph Front Cable Holder / Retainer - OIF Models - Split Type Attaches to your front mudguard, the grommet type fitting clips into a hole in the...
+

clutch3263-E12
£3.45 (£4.14 inc VAT)
OEM: 68-3263
BSA Clutch Cable Adapter / Stop - A50/A65 Models Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable abutment and...
+

wtf-cabpart007
£3.45 (£4.14 inc VAT)
Cable Joint / Clevis Bend - Yamaha Front Brake Cable to Brake Arm + Universal Use Genuine Yamaha front brake cable to brake arm clevis joint. Slot...
+

fkcab607-E12
£2.95 (£3.54 inc VAT)
OEM: 99-0241, 16/011
Cable Stop Large slotted cable stop, standard Doherty and Amal, for twistgrip Fits into the Twistgrip to retain the end of the throttle cable. Diameters:...
+

fkcabtie03b-4+1/2"-E12
£2.95 (£3.54 inc VAT)
Pack of 10 Black Rubber Cable Ties - 3" or 4+1/2" Ten quality black rubber authentic style cable ties Available in a choice of sizes - please select...
 

fkcabtie03g-E12
£2.95 (£3.54 inc VAT)
Cable Ties Grey 4" Rubber - 10 Ties
+

fktach4-G15
£2.95 (£3.54 inc VAT)
OEM: 60-2596
Speedometer/Tachometer Mounting Rubber. Suit smaller clocks, BSA and Triumph. ID: 2+1/2", OD: 3", Depth 2+1/2" (all approx.) Rubber binnacle for BSA/Triumph...
+

tie604-E12
£2.95 (£3.54 inc VAT)
OEM: 82-9918
8" Long Alloy Cable Ties Triumph - Universal - Pack of 5 Triumph O.E.M. style Alloy Cable Ties Approximately 5" Long OEM: 82-9918
+

clutch046-B23
£2.95 (£3.54 inc VAT)
OEM: 57-0495, T495
Clutch Lever Rubber - Triumph - 57-0495, T495 Triumph Pre-Unit Clutch lever rubber boot. OEM: 57-0495, T495
+

speedo309-G15
£2.95 (£3.54 inc VAT)
OEM: 02-1798
AJS, Matchless Speedo Mounting Rubber - 02-1798 AJS, Matchless speedometer mounting grommet. OEM: 02-1798
+

adj1006-E12
£2.95 (£3.54 inc VAT)
OEM: AM18/1006
Doherty Type Cable Adjuster - 207 / 208PA Series Levers Groove cut through side to allow fitting after cable made up. Total length: 1+19/32" (40.5mm)...
+

adj1005-E12
£2.95 (£3.54 inc VAT)
OEM: AM18/1005
Doherty Type Cable Adjuster Nut - 207 / 208PA Series Levers Groove cut through side to allow fitting after making up cable. OD: 1+19/32" (19.3mm) Depth:...
+

lev041-E12
£2.95 (£3.54 inc VAT)
Control Lever Clip - For 1" Handlebars To fit Handlebar Diameter: 1" (25.4mm) Chrome plated
+

tach1929-G15
£2.95 (£3.54 inc VAT)
OEM: 97-1929, H1929
Triumph Speedo/Tacho Mounting Bracket Bush - 350/500/650cc Unit Models From 1964-70 Instrument bracket mounting metalastik bush. Mounts the twin gauges...
+

amal-RKC/613
£2.95 (£3.54 inc VAT)
OEM: RKC/613, 4/035, 9/035, 5/077, 9/077
Genuine Amal Cable Adjuster and Lock Nut - RKC/613 For 600, 900, 276, 376, 389 series Amal carburettors. Screws into the top cap to adjust the cable....
+

c/cable3475-B18
£2.95 (£3.54 inc VAT)
OEM: 70-3475, E3475
Clutch Cable / Outer Gearbox Cover Grommet - Triumph Unit 350/500cc Models Circa 1958-63 Rubber grommet locates on the top of the outer gearbox casing to...
+

tach1086-G15
£2.95 (£3.54 inc VAT)
OEM: 97-1086, H1086
Triumph Tacho Mounting Bracket Bolt - Late Pre Unit + Unit 350/500/650cc Twins Circa 1960-66 Instrument bracket mounting bolt. Mounts the twin gauges...
+

cab-slotted-lge-E12
£2.95 (£3.54 inc VAT)
OEM: 18/880
Barrel Type Slotted Nipple - Outside Diameter 3/8" - Large Bore Larger internal bore size than our standard slotted nipple. Well suited to custom made...
+

nut427-G15
£2.45 (£2.94 inc VAT)
OEM: 97-1701, H1701
Triumph T100/TR6 etc Instrument Mount Sleeve Nut. Sold single, Price for one. OEM: 97-1701, H1701
+

cab8506-E12
£2.45 (£2.94 inc VAT)
OEM: 90-8506
Cable Stop / Ferrule - Brake & Clutch Cable - Bantam Type for Welded Lug Bars Slotted cable ferrule to stop the cables pulling through the handlebar...
+

clip4112H-E12
£2.45 (£2.94 inc VAT)
OEM: 97-4112, H4112
Handlebar Cable Clip - Universal Fit for 7/8" Bars Correct fitment for late Triumph, BSA & Norton Models, but universal fit for all 7/8" bars. Note:...
+

off-lev-0110.02-E12
£2.45 (£2.94 inc VAT)
OEM: 0110.02.073
Cable Adjuster - Domino Decompression Lever + Universal Fit - M5 Thread Steel cable adjuster with lockring nut - M5 thread. Universal fit, suitable for...
+

screw8813-E12
£2.45 (£2.94 inc VAT)
OEM: 29-8813, 18/087, 02-0510, 60-0964, D964
Handlebar Lever Fulcrum Pivot Screw + BSA Brake Rod Linkage and Front Brake Cable to Arm Clutch and brake lever pivot screw as used with lugged handlebars...
+

wtf-cabpart008
£2.45 (£2.94 inc VAT)
Clevis Pin - Yamaha Front Brake Cable to Brake Arm + Universal Use Genuine Yamaha front brake cable to brake arm clevis pin. Attaches the cable to...
+

fkcab631-E12
£2.25 (£2.70 inc VAT)
Cable Adjuster 1+1/8" x 1/4" CEI Thread Will fit Cable ferrules No.2
+

fkcab632-E12
£2.25 (£2.70 inc VAT)
Cable Adjuster 1+1/2" x 1/4" CEI Thread Will fit Cable ferrules No.3
+

cab9325-E12
£2.25 (£2.70 inc VAT)
OEM: 76-9325, 97-2659, H2659
BSA/Triumph Cable Guide Grommet - Top Yoke - A50, A65, B25, B44, C25 + T250, TR25W - Circa 1967-70 Locates within the bracket that attaches to the top...
+

fkcab633-E12
£1.99 (£2.39 inc VAT)
Cable Adjuster - Universal - 5/16" 5/16" Cable Adjuster with lock nut. Total length - 1+5/8" (41mm) Thread diameter - 5/16" (8mm)
+

amal-adj001
£1.95 (£2.34 inc VAT)
OEM: 4/035, 9/035, 99-1024, 99-7096
Amal Carburettor Cable Adjuster For 600, 900, 276, 376, 389 series Amal carburettors Screws into the top cap to adjust the cable. OEM: 4/035, 9/035,...
+

fkcab00-E12
£1.95 (£2.34 inc VAT)
Pear type solderless cable nipple Length: 1/2"(13mm), Head: 9/32"(7mm), Neck: 5/32"(4mm) Sold Singly.
+

fkcab01-E12
£1.95 (£2.34 inc VAT)
Barrel type solderless cable nipple Length: 3/8"(9.5mm), Diameter: 1/4"(6mm) Sold singly.
+

fkcab02-E12
£1.95 (£2.34 inc VAT)
Barrel type solderless cable nipple Length: 7/16"(11mm), Diameter: 11/32"(9mm) Sold Singly.
+

rubber907-E12
£1.95 (£2.34 inc VAT)
OEM: 97-0669, H669
Handlebar Rubber Grommet - Triumph Nacelle Type As fitted on Triumph 3TA/5TA models etc Sold each (1) OEM: 97-0669, H669
+

clevis14-1116-E12
£1.95 (£2.34 inc VAT)
Clevis Pin 1/4" x 11/16" 1/4" (6mm) diameter, 11/16" (15mm) shaft length Suitable for cable end clevis. To secure the cable end to a lever
+

cab-nip708
£1.95 (£2.34 inc VAT)
Barrel type Solderless Cable Nipple - 5/16" (8mm) Barrel Length: 3/8" (10mm), OD: 5/16" (8mm) Cable hole: 2.5mm Feed the cable through the hole and...
+

cab-nip700-E12
£1.95 (£2.34 inc VAT)
Pear type solderless cable nipple - 1/4" (7mm) Pear type solderless cable nipple, feed cable through and tighten screw to lock cable in place. Length:...
+

hbolt1340-E12
£1.95 (£2.34 inc VAT)
OEM: 97-1340, H1340
Triumph Handlebar P Clamp Bolt -  BSF Thread - 500/650cc Models Circa 1963-69 Top bolt for use with handlebar P clamp 97-1523. Domed head - chrome...
+

cab366-E12
£1.95 (£2.34 inc VAT)
OEM: 366/2
Cable Stop - Small Amal Type - 366/2 Small slotted cable stop, standard Amal type, fits into the twistgrip to retain the end of the throttle cable....
+

tie132-T13
£1.95 (£2.34 inc VAT)
20" Long Black Plastic Cable Ties - Universal - Pack of 12 Self-locking mechanism for easy fit and adjustment. Zip Clip, zipclips. Length: 20" (51cm)...
+

clutch043c-B23
£1.75 (£2.10 inc VAT)
OEM: 57-1646, 68-3264
Clutch Cable Adjuster Sleeve /Rubber Boot For Triumph 650cc and 750cc models OEM: 57-1646, 68-3264, T1646
+

fkcab23-E12
£1.45 (£1.74 inc VAT)
Barrel type cable nipple Length: 3/8"(9mm), Diameter: 3/8"(9mm) Sold Singly. - Suit some clutch and brake levers.
+

hbolt1425-E12
£1.45 (£1.74 inc VAT)
OEM: 97-1425
Handle Bar Clamp Sleeve - BSA, Triumph Clamp spacer for use with 'P' clamp 97-2291 4 Required per set Sold each (1) OEM: 97-1425
+

amal-adj102
£1.45 (£1.74 inc VAT)
OEM: 5/077, 9/077, 99-7097, 99-0224, 06-7972
Amal Carburettor Cable Adjuster Lock Nut For 600, 900, 276, 376, 389 series Amal carburettors Locks the screw in the top cap to adjust the cable. OEM:...
+

tie128-T5
£1.45 (£1.74 inc VAT)
12" Long Black Plastic Cable Ties - Universal - Pack of 40 Self-locking mechanism for easy fit and adjustment. Zip Clip, zipclips. Length: 12" (30.5cm)...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.