.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Control Parts

cable26807
£18.95 (£22.74 inc VAT)
OEM: 26807
Front Brake Cable AJS 18CS Southerner, Matchless G80CS Marksman - 1960-64 Pear nipple and adjuster + loose barrel nipple. Inner Cable: 39" (99cm) approx...
+

speedcablesmith1-F14
£19.95 (£23.94 inc VAT)
Speedo Cable - Smiths Speedometer - old fitting type Rear Wheel Length: 54" To fit speedo head thread of 11/16" (18mm) diameter. Available as 54" long
+

cable7517
£19.95 (£23.94 inc VAT)
OEM: 017517
AJS/Matchless Front Brake Cable 1946-47 - 017517 Suitable for following: AJS and Matchless Single and Twin cylinder from 1946-1947, also WD models Pear...
+

cable8680
£19.95 (£23.94 inc VAT)
OEM: 65-8680
BSA Clutch Cable - B and M Group 4 Speed with Adjuster on Gearbox - Circa 1949-63 Correct fitment on BSA B31, B33 models from 1949-60 and M20, M21 models...

cable1085
£19.95 (£23.94 inc VAT)
OEM: T1085, C717
Ariel Clutch Cable - Ariel Leader Models from 1960-65 Outer length: 47" (120cm) Inner length: 50" (128mm) Genuine Doherty - Made in England OEM:...
+

cable8518
£19.95 (£23.94 inc VAT)
OEM: 68-8518
Front Brake Cable BSA A50, A65 8" F/W Hub - 1965-66 - Genuine Doherty Outer Cable: 37+1/2" (95cm) approx Inner Cable: 46" (117cm) approx Clevis/shackle...
+

cable0934
£19.95 (£23.94 inc VAT)
OEM: 60-0934, 60-934
Front Brake Cable BSA B40 Rough Rider Model Barrel nipple and adjuster + ball nipple and adjuster. Outer Cable: 36" (91.5cm) approx Inner Cable: 42"...
+

cable0482
£19.95 (£23.94 inc VAT)
OEM: 060482, 06-0482
Rear Brake Cable Norton Commando 750/850cc Models - 1968-74 Pear nipple + pear nipple with shackle end. Outer Cable: 13+3/16" (33.5cm) approx Inner...
+

cable0307x
£19.95 (£23.94 inc VAT)
OEM: 60-0307X, D307X
Triumph Clutch Cable - Pre-Unit 500/650cc Models Circa 1955-57 - UK Bars 1954 TR5 + 5T, 6T, TR5, T100, T110, TR6 models from 1955-57 with standard UK...
+

cable8795
£19.95 (£23.94 inc VAT)
OEM: 65-8795
Exhaust Lifter Cable - BSA Standard OHV Models - Circa 1948-59 Correct fitment on BSA B31, B33 and M33 models + B32 and B34 swinging arm models only....
+

cable0011
£19.95 (£23.94 inc VAT)
OEM: 62-0011
Harris Triumph Magura Clutch Cable - T140 US Spec Models From 1985 Onwards Correct fitment on the later Harris T140 models with higher US handlebars....
+

lev3583-E14
£19.95 (£23.94 inc VAT)
OEM: 60-3583, D3583, 06-2250, 06-2553
Triumph Alloy Brake Lever - Standard Pivot With Ball End - T120, TR6 and T150 Models Circa 1971-72 Polished alloy brake lever blade with standard pivot -...
+

cabbox003SS-E12
£19.95 (£23.94 inc VAT)
OEM: 244/104, 99-0341, 01-9824, 60-0685, D685, 68-8561
Junction Box - Twin Cable Control - Stainless Steel With Brass Internal Slider Amal choke/throttle cable splitter used on various models including BSA,...
+

cable2083b
£19.95 (£23.94 inc VAT)
OEM: 60-2083
BSA B44, B25, B40, B50, C15 Clutch Cable - 60-2083 Suitable for following: BSA - B44, B25Ss, B25T, B40, C15, B50SS, B50MX, B50T Made in England Outer...
+

cable2083t
£19.95 (£23.94 inc VAT)
OEM: 60-2083
Triumph TR25W, T25 Clutch Cable - 60-2083 Suitable for following: Triumph TR25W, T25SS, T25T Made in England Outer length: 49" Inner length: 53" OEM: 60-2083
+

cable8732
£20.95 (£25.14 inc VAT)
OEM: 42-8732
Front Brake Cable BSA A10 - 42-8732 To fit BSA A10 1958 650cc with 8 inch front brake Outer Cable: 33" approx Inner Cable: 40" approx Made in England...
+

cable0896
£20.95 (£25.14 inc VAT)
OEM: 60-0896, 60-896
Front Brake Cable BSA Bantam B175 Bushman - 1968-69 Outer Cable: 36+1/4" (92cm) approx Inner Cable: 42" (107cm) approx Clevis/shackle end with adjuster...
+

off-cab-BRI1100
£20.95 (£25.14 inc VAT)
Universal Clutch/Brake Cable Kit - Inner and Outer Cable + 1/4" BSF Cable Adjuster, Nipples and Ferrules Inner wire and outer conduit plus a range of...
+

cable8500
£20.95 (£25.14 inc VAT)
OEM: 68-8500
BSA A50 / A65 Clutch Cable - 1962-63 Models Correct fitment on early models which were not fitted with a clutch connector assembly, cable abutment and...
+

fkbar187
£21.95 (£26.34 inc VAT)
OEM: 90-4992
Handle Bars BSA Bantam D7, D10, D14 Tip to Tip: 22" Diameter: 7/8" Bar lift 2" from centre OEM: 90-4992 Please note this item may attract a higher rate...
+

cable8501
£21.95 (£26.34 inc VAT)
OEM: 66-8501, 66-8580
Exhaust Lifter Cable - BSA M Series - Side Valve WD Models Decompressor / exhaust lifter cable Inner Length: 32+1/2" (82cm) Outer Length: 37" (94cm)...
+

cable8569
£21.95 (£26.34 inc VAT)
OEM: 66-8569, 66-8570
BSA Clutch Cable - M20 WD Models - 1940 Onwards Outer Cable: 52" (132cm) Inner Cable: 57+1/2" (146cm) OEM:  66-8569, 66-8570 This is a Genuine...
+

cable8749
£21.95 (£26.34 inc VAT)
OEM: 018749, 01-8749
Magneto Cable - AJS / Matchless - Standard Touring Twins From 1953 Onwards Ignition control cable for all standard touring AJS and Matchless twins from...
+

cable0307
£21.95 (£26.34 inc VAT)
OEM: 60-0307, D307
Triumph Clutch Cable - Pre-Unit 500/650cc Models Circa 1955-57 - UK Bars 1954 TR5 + 5T, 6T, TR5, T100, T110, TR6 models from 1955-57 with standard UK...
+

cable6242
£22.95 (£27.54 inc VAT)
OEM: 02-6242, T774
AMC - AJS/Matchless Clutch Cable - 14S, 14CSR, G2S, G2CSR - 1960-66 Suitable for following lightweight models: AJS 14S, 14CSR and Matchless G2S, G2CSR...
+

cable2034
£22.95 (£27.54 inc VAT)
OEM: 60-2034, D2034
Front Brake Cable BSA B25, B44/Triumph TR25W - 1969-70 Outer Cable: 35" (89cm) approx Inner Cable: 41" (104cm) approx Genuine Doherty Cable - Made in...
+

cable3592
£22.95 (£27.54 inc VAT)
OEM: D12/268, NM23592, 023592, 02-3592
Extra Long Front Brake Cable Norton/AMC Standard Touring Models - 1956-64 - D12/268 Plus 6" (15cm) length over standard size. Barrel nipple + pear nipple...
+

cable3499
£22.95 (£27.54 inc VAT)
OEM: 60-3499
BSA Throttle Cable - B50MX Victor 500cc Models Circa 1971-73 Correct fitment on B50 moto cross models with braced handlebars and Amal concentric carb....
+

lev294-E19
£23.95 (£28.74 inc VAT)
OEM: 100
Genuine Doherty Air Choke or Magneto Lever RH - 7/8" Bars - 100 Type - Short Lever Chrome plated - right hand fit - flat end type. OEM:  12/556,...
+

lev293-E19
£23.95 (£28.74 inc VAT)
OEM: 100
Genuine Doherty Air/Magneto Lever LH - 7/8" Bars - 100 Type - Short Lever Air/Magneto Lever to fit 7/8" handlebars - LH fit OEM: 100 This is a Genuine...
+

cable0664
£23.95 (£28.74 inc VAT)
OEM: 60-0664, D664
Front Brake Cable Triumph 650cc Unit TLS & UK Bars - 1968 Models Barrel nipple + shackle end. Outer Cable: 43" (109cm) approx Inner Cable: 51"...
+

cable-pan196
£23.95 (£28.74 inc VAT)
Magneto Cable - Royal Enfield, Panther - Standard Touring Models - 1955-62 Outer Cable: 44" (112cm) Inner Cable: 47+3/4" (121cm) Lever nipple: 1/4"...
+

cable8675
£24.95 (£29.94 inc VAT)
OEM: 65-8675, 67-8601
Front Brake Cable 7" Hub BSA A7, A10, B31, B33, M20, M21 etc Suit many A, B and M group BSA models with 7 inch brake drum. Outer Cable: 35" approx Inner...
+

barD330
£24.95 (£29.94 inc VAT)
24" Straight Bar 7/8" Handlebars - Chrome Plated Diameter: 7/8" Total length: 24" (61cm) Handlebars rake back 4" from centre Chrome plated - made in...
+

cable0308
£24.95 (£29.94 inc VAT)
OEM: 60-0308, D308
Triumph Clutch Cable - Pre-Unit 500/650cc Models Circa 1953-57 - USA Bars 5T, 6T, T100, T110, TR6 models from 1953-57 with higher USA handlebars. 3/8" x...
+

off-lev2930
£24.95 (£29.94 inc VAT)
OEM: 534/951, 534/952
Pair of Replica Amal Alloy Clutch and Brake Levers - Complete Assembly - 7/8" Bars Clutch and brake lever to fit 22mm (7/8") handlebars. Cast alloy...
+

cable4185
£24.95 (£29.94 inc VAT)
OEM: 60-4185, D4185
Triumph Front Brake Cable - T150V Trident Drum Brake Models Circa 1973-75 - Genuine Doherty Correct fitment on later conical hub drum brake T150 models....
+

fkbar184a_CP
£24.95 (£29.94 inc VAT)
OEM: 65-4960
Handle Bars AJS, Matchless - Std Touring Diameter: 7/8" OEM: 65-4960, 02-1257 Please note this item may attract a higher rate of shipping, please see...
 

fkbar184b_CP
£24.95 (£29.94 inc VAT)
OEM: 65-4960
BSA Handlebars - A7, A10, A65 Standard Type Bars Tip to Tip: 29" Diameter: 7/8" Handles rake back 3" from centre Bar lift 2" from centre OEM:...
 

lev454-E19
£25.95 (£31.14 inc VAT)
OEM: 207P
Genuine Doherty Brake Lever 1" Bars - 207P Type - Ball End Brake Lever to fit 1" handlebars - RH fit Non adjuster type Pivot distance: 1+1/16" (27mm) -...
+

twist446-E8
£25.95 (£31.14 inc VAT)
OEM: No. 61
Genuine Doherty No.61 - 1"  Twistgrip/Throttle Plastic twister Chromed plated head and stamped with the Doherty trade mark. Suitable for single...
+

p-bolt1523-E12
£25.95 (£31.14 inc VAT)
OEM: 97-1523, H1523
Triumph Handlebar P Clamp Eyebolt  - BSF/CEI Thread - Unit 500/650cc Models Circa 1963-69 Handlebar eyebolt as used on 500cc models from 1967-69 + 650cc...
+

cable0100
£25.95 (£31.14 inc VAT)
OEM: 60-0100, D100
Triumph Lucas Magneto Control Cable - Standard Touring Models Circa 1950-62 - Genuine Doherty Magneto advance / retard cable suitable for pre unit TR5,...
+

lev453-E14
£25.95 (£31.14 inc VAT)
OEM: 207P
Genuine Doherty Clutch Lever 1" Bars - 207P Type - Ball End Clutch Lever to fit 1" handlebars - RH fit. Non adjuster type Pivot distance: 1+1/16" (27mm) -...
+

cable8611
£25.95 (£31.14 inc VAT)
OEM: 68-8611, 68-8608
BSA A50 / A65 Clutch Cable - 1964-68 Models Correct fitment on models with non alloy levers. Standard length for UK spec handlebars. Lever end: 3/8" x...
+

cable784-UK
£26.95 (£32.34 inc VAT)
OEM: 42-8670
Front Brake Cable BSA A7, A10 & B31, B33 Models with 7" Ariel Alloy Hub from 1956-57 Outer Cable: 36" (91.4cm) Inner Cable: 41" (104cm) Standard or...
 

bar045_CP
£27.95 (£33.54 inc VAT)
OEM: 06-4132
Norton 7/8" Handlebars - Commando, Interstate - UK and European Models Diameter: 7/8" Total length: 28" Handlebars rake back 3+1/2" from centre In normal...
 

fkbar048
£27.95 (£33.54 inc VAT)
OEM: 97-4538
Triumph Handlebars -  UK Spec T140/TR7 Models Tip to Tip: 26" Diameter: 7/8" Handles rake back 2" from centre Bar lift 3 to 6" from centre Knurled...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.