.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Cable Parts

cab-nip709-E12
£1.25 (£1.50 inc VAT)
Barrel type solderless cable nipple - 11/32 inch (9mm) Barrel type solderless cable nipple Barrel Length excluding bolt: 5/8" (16mm), Diameter: 11/32"...
+

cab-nip613
£1.25 (£1.50 inc VAT)
Barrel Type Solderless Cable Nipple - 3/8" Outside Diameter OD: 3/8" (8.8mm) Length excluding threaded screw: 7/16" (11mm) Overall length: 9/16"  (14.3mm)...
+

cab-nip706-E12
£0.75 (£0.90 inc VAT)
Barrel type solderless cable nipple - 1/4 inch (6mm) Barrel type solderless cable nipple Barrel Length excluding screw: 5/16" (8mm), Diameter: 1/4" (6mm)...
+

cab-nip708
£1.95 (£2.34 inc VAT)
Barrel type Solderless Cable Nipple - 5/16" (8mm) Barrel Length: 3/8" (10mm), OD: 5/16" (8mm) Cable hole: 2.5mm Feed the cable through the hole and...
+

cab-nip101-E12
£0.95 (£1.14 inc VAT)
Split / Slotted Barrel Nipple - 5/16" (8mm) Outside Diameter Suitable for some clutch and brake levers - for use with cables with a pear nipple end...
+

cab-nip700-E12
£1.95 (£2.34 inc VAT)
Pear type solderless cable nipple - 1/4" (7mm) Pear type solderless cable nipple, feed cable through and tighten screw to lock cable in place. Length:...
+

cab-pear480-E12
£0.60 (£0.72 inc VAT)
Pear type cable nipple, to fit cable No.2 or No.3 Suit No.2 or No.3 wire. Length: 3/8"(9mm), Head: 1/4"(6mm), Neck: 1/8"(3.5mm) Sold Singly. - Suit...
+

cab-pear470-E12
£0.55 (£0.66 inc VAT)
Pear type cable nipple (short) No.2 Suit No.2 wire. Length: 3/16"(5mm), Head: 1/4"(6mm), Neck: 1/8"(3.5mm) Sold Singly. - Suit various controls.
+

cab-pear475-E12
£0.65 (£0.78 inc VAT)
Pear Type Cable Nipple - No.3 Suitable for  No.3 cable wire. Length: 11mm Head: 5.6mm Neck: 3.75mm ID: 2.5mm Sold Singly.
+

clevis490-E12
£3.95 (£4.74 inc VAT)
Clevis Bend - Quick Release - 1/4" to suit 1/4" (6mm) Clevis Pin with 11/16" (15mm) shaft length Suitable for cable end with a pear nipple, to allow...
+

clutch046-B23
£2.95 (£3.54 inc VAT)
OEM: 57-0495, T495
Clutch Lever Rubber - Triumph - 57-0495, T495 Triumph Pre-Unit Clutch lever rubber boot. OEM: 57-0495, T495
+

fkcab633-E12
£1.99 (£2.39 inc VAT)
Cable Adjuster - Universal - 5/16" 5/16" Cable Adjuster with lock nut. Total length - 1+5/8" (41mm) Thread diameter - 5/16" (8mm)
+

fkcabtie03JB-E12
£5.95 (£7.14 inc VAT)
OEM: 60-0978
Pack of 5 Black Rubber John Bull Style Cable Ties - 4+1/4" Five quality black rubber authentic style cable ties Premium quality and extra strong Made...
+

amal-adj102
£1.45 (£1.74 inc VAT)
OEM: 5/077, 9/077, 99-7097, 99-0224, 06-7972
Amal Carburettor Cable Adjuster Lock Nut For 600, 900, 276, 376, 389 series Amal carburettors Locks the screw in the top cap to adjust the cable. OEM:...
+

adj1006-E12
£2.95 (£3.54 inc VAT)
OEM: AM18/1006
Doherty Type Cable Adjuster - 207 / 208PA Series Levers Groove cut through side to allow fitting after cable made up. Total length: 1+19/32" (40.5mm)...
+

adj1005-E12
£2.95 (£3.54 inc VAT)
OEM: AM18/1005
Doherty Type Cable Adjuster Nut - 207 / 208PA Series Levers Groove cut through side to allow fitting after making up cable. OD: 1+19/32" (19.3mm) Depth:...
+

cab366-E12
£1.95 (£2.34 inc VAT)
OEM: 366/2
Cable Stop - Small Amal Type - 366/2 Small slotted cable stop, standard Amal type, fits into the twistgrip to retain the end of the throttle cable....
+

cab8506-E12
£2.45 (£2.94 inc VAT)
OEM: 90-8506
Cable Stop / Ferrule - Brake & Clutch Cable - Bantam Type for Welded Lug Bars Slotted cable ferrule to stop the cables pulling through the handlebar...
+

cab2270A-E12
£5.95 (£7.14 inc VAT)
OEM: 97-2270, H2270, 97-4479, H2270
Triumph/BSA Enclosed Front Cable Holder / Retainer - OIF Models Attaches to your front mudguard, the grommet type fitting clips into a hole in the...
+

cab2270-E12
£5.95 (£7.14 inc VAT)
OEM: 97-2270, H2270, 97-4479, H4479
Triumph Enclosed Front Cable Holder / Retainer - OIF Models - White Attaches to your front mudguard, the grommet type fitting clips into a hole in the...
+

cab2270B-E12
£3.45 (£4.14 inc VAT)
OEM: 97-2270, H2270, 97-4479, H4479
Triumph Front Cable Holder / Retainer - OIF Models - Split Type Attaches to your front mudguard, the grommet type fitting clips into a hole in the...
+

cab8245-E12
£0.75 (£0.90 inc VAT)
OEM: 82-8245, F8245
Triumph Starlock Washer for Front Cable Holder / Retainer - OIF Models 5/16" starlock washer used to fix cable retainer that clips into a hole in the...
+

tie132-T13
£1.95 (£2.34 inc VAT)
20" Long Black Plastic Cable Ties - Universal - Pack of 12 Self-locking mechanism for easy fit and adjustment. Zip Clip, zipclips. Length: 20" (51cm)...
+

tie128-T5
£1.45 (£1.74 inc VAT)
12" Long Black Plastic Cable Ties - Universal - Pack of 40 Self-locking mechanism for easy fit and adjustment. Zip Clip, zipclips. Length: 12" (30.5cm)...
+

adj1708-E12
£4.95 (£5.94 inc VAT)
OEM: 18-1708, 18-1709, 18-838, 18-839, 99-1031, 60-3585, 60-3586
Cable Adjuster and Lockring Nut - Slide In Type - Triumph, BSA and AMC Groove cut through side to allow fitting after cable made up. Total length:...
+

cabtie-030-E12
£3.95 (£4.74 inc VAT)
Black Purse Lock Cable Ties - Pack of 10 - To Fit 7.3mm to 8.8mm Purse lock twist ties to position cables or keep cable bundles secure with one twist....
+

amal-RKC/613
£2.95 (£3.54 inc VAT)
OEM: RKC/613, 4/035, 9/035, 5/077, 9/077
Genuine Amal Cable Adjuster and Lock Nut - RKC/613 For 600, 900, 276, 376, 389 series Amal carburettors. Screws into the top cap to adjust the cable....
+

cab0973-E12
£0.85 (£1.02 inc VAT)
Universal Rubber Cable / Hose Guide - 20mm x 12mm Useful frame protector that can be attached to cables as required. Suitable for fitting onto most...
+

ferr-A3-E12
£0.65 (£0.78 inc VAT)
Splicing / Swaging Ferrule - 3.5mm Wire To be swaged onto wire or used to make a loop or eyelet. Length: 3/8" (10mm) ID: 5/16" (7.6mm) x 1/8" (3.6mm)...
+

ferr-A1.5-E12
£0.65 (£0.78 inc VAT)
Splicing / Swaging Ferrule - 1.5mm Wire To be swaged onto wire or used to make a loop or eyelet. Length: 1/4" (6mm) ID: 1/8" (3.6mm) x 1/16" (1.9mm)...
+

ferr-A1-E12
£0.65 (£0.78 inc VAT)
Splicing / Swaging Ferrule - 1mm Wire To be swaged onto wire or used to make a loop or eyelet. Length: 3/16" (5mm) ID: 3/32" (2.3mm) x 1/16" (1.3mm)...
+

cab3997-E12
£4.25 (£5.10 inc VAT)
OEM: 37-3997, W3997, 37-3867, W3867
Triumph/BSA Brake Cable Stop Abutment - Front 8" Conical Hub - Non-Slotted Type Brake cable abutment bush as fitted to unit Triumph and BSA models with a...
+

clutch3263-E12
£3.45 (£4.14 inc VAT)
OEM: 68-3263
BSA Clutch Cable Adapter / Stop - A50/A65 Models Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable abutment and...
+

cab3682-E12
£4.45 (£5.34 inc VAT)
OEM: 97-3682, H3682
Triumph/BSA Front Brake Cable Guide Bracket - Unit Singles and Twins + T150 Models Circa 1968-73 Locates over the timing side fork leg pinch bolt -...
+

cab5137
£4.45 (£5.34 inc VAT)
OEM: 68-5137, 97-2658, H2658
BSA/Triumph Cable Guide Bracket - Top Yoke - A50, A65, B25, B44, C25 + T250, TR25W - Circa 1967-70 Locates between the top yoke and fork top nuts to...
+

cab9325-E12
£2.25 (£2.70 inc VAT)
OEM: 76-9325, 97-2659, H2659
BSA/Triumph Cable Guide Grommet - Top Yoke - A50, A65, B25, B44, C25 + T250, TR25W - Circa 1967-70 Locates within the bracket that attaches to the top...
+

cab5090-E12
£1.45 (£1.74 inc VAT)
OEM: 40-5090, 97-2654, H2654
BSA/Triumph Wire Cable Guide - A50, A65, B25, B44, C25 + T250, TR25W - Circa 1967-70 Locates on the back of the lower fork pinch bolt to retain the...
+

c/cable3475-B18
£2.95 (£3.54 inc VAT)
OEM: 70-3475, E3475
Clutch Cable / Outer Gearbox Cover Grommet - Triumph Unit 350/500cc Models Circa 1958-63 Rubber grommet locates on the top of the outer gearbox casing to...
+

cab1640-E12
£4.45 (£5.34 inc VAT)
OEM: 37-1640, W1640
Triumph Front Brake Cable / Fulcrum Pin Abutment - 500/650cc Unit Models Circa 1965-67 9/16" deep slotted brake cable abutment - locates on the brake...
+

cab-nip-bn89L-E12
£0.95 (£1.14 inc VAT)
Brass Barrel Cable Nipple - Length 9mm x 8mm (5/16") Diameter Suitable for some clutch and brake levers, for use with cables with a pear nipple end...
+

cab-nip-bn1015L-E12
£0.95 (£1.14 inc VAT)
Zinc Plated Barrel Cable Nipple - Length 15mm x 10mm (3/8") Diameter Suitable for some clutch and brake levers, for use with cables with a pear nipple...
+

cab-nip-bn813L-E12
£0.95 (£1.14 inc VAT)
Zinc Plated Barrel Cable Nipple - Length 13mm x 8mm (5/16") Diameter Suitable for some clutch and brake levers, for use with cables with a pear nipple...
+

cab-nip-bn1010L-E12
£0.95 (£1.14 inc VAT)
Zinc Plated Barrel Cable Nipple - Length 10mm x 10mm (3/8") Diameter Suitable for some clutch and brake levers, for use with cables with a pear nipple...
+

clip3659-E12
£0.45 (£0.54 inc VAT)
OEM: 60-3659, D3659
Triumph Clutch Cable to Side Panel Spring Clip - T150 Models From 1973 Onwards Locates on the top edge of the left hand / drive side panel to position...
+

cabbox003SS-E12
£19.95 (£23.94 inc VAT)
OEM: 244/104, 99-0341, 01-9824, 60-0685, D685, 68-8561
Junction Box - Twin Cable Control - Stainless Steel With Brass Internal Slider Amal choke/throttle cable splitter used on various models including BSA,...
+

clutch043c-B23
£1.75 (£2.10 inc VAT)
OEM: 57-1646, 68-3264
Clutch Cable Adjuster Sleeve /Rubber Boot For Triumph 650cc and 750cc models OEM: 57-1646, 68-3264, T1646
+

cab446-E12
£0.75 (£0.90 inc VAT)
Brass Barrel Type Cable Nipple - 1/4" Long x 1/4" Diameter - Suitable For Standard Twistgrips Length: 1/4" (6.4mm) Diameter: 1/4" (6mm) Sold individually.
+

cab-slotted-lge-E12
£2.95 (£3.54 inc VAT)
OEM: 18/880
Barrel Type Slotted Nipple - Outside Diameter 3/8" - Large Bore Larger internal bore size than our standard slotted nipple. Well suited to custom made...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.