.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Cable Parts

cabbox003SS-E12
£19.95 (£23.94 inc VAT)
OEM: 244/104, 99-0341, 01-9824, 60-0685, D685, 68-8561
Junction Box - Twin Cable Control - Stainless Steel With Brass Internal Slider Amal choke/throttle cable splitter used on various models including BSA,...
+

fkcabbox03-E12
£8.95 (£10.74 inc VAT)
OEM: 244/104, 99-0341, 01-9824, 60-0685, D685
Junction Box - Twin Cable Control - Black Nylon Suitable for: Single cable entry from twistgrip or air lever and two cable outlets for twin carburettors....
+

cabkit
£7.95 (£9.54 inc VAT)
Emergency Cable Repair Kit - Inner Wire + Various Nipples Emergency cable repair kit for temporary fixing throttle or clutch cables. 1.6M 1.5mm cable....
+

fkcableties-E12
£5.99 (£7.19 inc VAT)
Mixed Cable Ties - 100 pieces 180mm & 120mm in black and white Zip Clip, zipclips.
+

fkcab634-E12
£5.95 (£7.14 inc VAT)
Cable Middle Adjuster 1+1/2" - 2" Suit throttle and air cables
+

fkcabbox04-E12
£5.95 (£7.14 inc VAT)
Cable Junction Box - Black Nylon. Suitable for: Single cable entry from twistgrip or air lever and three cable outlets for three carburettors.
+

fkcabtie03JB-E12
£5.95 (£7.14 inc VAT)
OEM: 60-0978
Pack of 5 Black Rubber John Bull Style Cable Ties - 4+1/4" Five quality black rubber authentic style cable ties Premium quality and extra strong Made...
+

cab2270A-E12
£5.95 (£7.14 inc VAT)
OEM: 97-2270, H2270, 97-4479, H2270
Triumph/BSA Enclosed Front Cable Holder / Retainer - OIF Models Attaches to your front mudguard, the grommet type fitting clips into a hole in the...
+

cab2270-E12
£5.95 (£7.14 inc VAT)
OEM: 97-2270, H2270, 97-4479, H4479
Triumph Enclosed Front Cable Holder / Retainer - OIF Models - White Attaches to your front mudguard, the grommet type fitting clips into a hole in the...
+

adj1708-E12
£4.95 (£5.94 inc VAT)
OEM: 18-1708, 18-1709, 18-838, 18-839, 99-1031, 60-3585, 60-3586
Cable Adjuster and Lockring Nut - Slide In Type - Triumph, BSA and AMC Groove cut through side to allow fitting after cable made up. Total length:...
+

cab3682-E12
£4.45 (£5.34 inc VAT)
OEM: 97-3682, H3682
Triumph/BSA Front Brake Cable Guide Bracket - Unit Singles and Twins + T150 Models Circa 1968-73 Locates over the timing side fork leg pinch bolt -...
+

cab5137
£4.45 (£5.34 inc VAT)
OEM: 68-5137, 97-2658, H2658
BSA/Triumph Cable Guide Bracket - Top Yoke - A50, A65, B25, B44, C25 + T250, TR25W - Circa 1967-70 Locates between the top yoke and fork top nuts to...
+

cab1640-E12
£4.45 (£5.34 inc VAT)
OEM: 37-1640, W1640
Triumph Front Brake Cable / Fulcrum Pin Abutment - 500/650cc Unit Models Circa 1965-67 9/16" deep slotted brake cable abutment - locates on the brake...
+

cab3997-E12
£4.25 (£5.10 inc VAT)
OEM: 37-3997, W3997, 37-3867, W3867
Triumph/BSA Brake Cable Stop Abutment - Front 8" Conical Hub - Non-Slotted Type Brake cable abutment bush as fitted to unit Triumph and BSA models with a...
+

fklev098-E12
£3.95 (£4.74 inc VAT)
Cable Adjuster Set Slide Type Groove cut through side to allow fitting after cable made up. Total length - 1+3/8" (35mm) Thread diameter - 3/8" (10mm)
+

clevis490-E12
£3.95 (£4.74 inc VAT)
Clevis Bend - Quick Release - 1/4" to suit 1/4" (6mm) Clevis Pin with 11/16" (15mm) shaft length Suitable for cable end with a pear nipple, to allow...
+

cabtie-030-E12
£3.95 (£4.74 inc VAT)
Black Purse Lock Cable Ties - Pack of 10 - To Fit 7.3mm to 8.8mm Purse lock twist ties to position cables or keep cable bundles secure with one twist....
+

cab-slotted-std-E12
£3.45 (£4.14 inc VAT)
OEM: 18/880
Barrel Type Slotted Nipple - Outside Diameter 3/8" - Standard Suitable for use with standard pre-made cables fitted with a 3/16" pear nipple. Typically...
+

cab2270B-E12
£3.45 (£4.14 inc VAT)
OEM: 97-2270, H2270, 97-4479, H4479
Triumph Front Cable Holder / Retainer - OIF Models - Split Type Attaches to your front mudguard, the grommet type fitting clips into a hole in the...
+

clutch3263-E12
£3.45 (£4.14 inc VAT)
OEM: 68-3263
BSA Clutch Cable Adapter / Stop - A50/A65 Models Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable abutment and...
+

wtf-cabpart007
£3.45 (£4.14 inc VAT)
Cable Joint / Clevis Bend - Yamaha Front Brake Cable to Brake Arm + Universal Use Genuine Yamaha front brake cable to brake arm clevis joint. Slot...
+

fkcab607-E12
£2.95 (£3.54 inc VAT)
OEM: 99-0241, 16/011
Cable Stop Large slotted cable stop, standard Doherty and Amal, for twistgrip Fits into the Twistgrip to retain the end of the throttle cable. Diameters:...
+

fkcabtie03b-4+1/2"-E12
£2.95 (£3.54 inc VAT)
Pack of 10 Black Rubber Cable Ties - 3" or 4+1/2" Ten quality black rubber authentic style cable ties Available in a choice of sizes - please select...
 

fkcabtie03g-E12
£2.95 (£3.54 inc VAT)
Cable Ties Grey 4" Rubber - 10 Ties
+

tie604-E12
£2.95 (£3.54 inc VAT)
OEM: 82-9918
8" Long Alloy Cable Ties Triumph - Universal - Pack of 5 Triumph O.E.M. style Alloy Cable Ties Approximately 5" Long OEM: 82-9918
+

clutch046-B23
£2.95 (£3.54 inc VAT)
OEM: 57-0495, T495
Clutch Lever Rubber - Triumph - 57-0495, T495 Triumph Pre-Unit Clutch lever rubber boot. OEM: 57-0495, T495
+

adj1006-E12
£2.95 (£3.54 inc VAT)
OEM: AM18/1006
Doherty Type Cable Adjuster - 207 / 208PA Series Levers Groove cut through side to allow fitting after cable made up. Total length: 1+19/32" (40.5mm)...
+

adj1005-E12
£2.95 (£3.54 inc VAT)
OEM: AM18/1005
Doherty Type Cable Adjuster Nut - 207 / 208PA Series Levers Groove cut through side to allow fitting after making up cable. OD: 1+19/32" (19.3mm) Depth:...
+

amal-RKC/613
£2.95 (£3.54 inc VAT)
OEM: RKC/613, 4/035, 9/035, 5/077, 9/077
Genuine Amal Cable Adjuster and Lock Nut - RKC/613 For 600, 900, 276, 376, 389 series Amal carburettors. Screws into the top cap to adjust the cable....
+

c/cable3475-B18
£2.95 (£3.54 inc VAT)
OEM: 70-3475, E3475
Clutch Cable / Outer Gearbox Cover Grommet - Triumph Unit 350/500cc Models Circa 1958-63 Rubber grommet locates on the top of the outer gearbox casing to...
+

cab-slotted-lge-E12
£2.95 (£3.54 inc VAT)
OEM: 18/880
Barrel Type Slotted Nipple - Outside Diameter 3/8" - Large Bore Larger internal bore size than our standard slotted nipple. Well suited to custom made...
+

cab8506-E12
£2.45 (£2.94 inc VAT)
OEM: 90-8506
Cable Stop / Ferrule - Brake & Clutch Cable - Bantam Type for Welded Lug Bars Slotted cable ferrule to stop the cables pulling through the handlebar...
+

wtf-cabpart008
£2.45 (£2.94 inc VAT)
Clevis Pin - Yamaha Front Brake Cable to Brake Arm + Universal Use Genuine Yamaha front brake cable to brake arm clevis pin. Attaches the cable to...
+

fkcab631-E12
£2.25 (£2.70 inc VAT)
Cable Adjuster 1+1/8" x 1/4" CEI Thread Will fit Cable ferrules No.2
+

fkcab632-E12
£2.25 (£2.70 inc VAT)
Cable Adjuster 1+1/2" x 1/4" CEI Thread Will fit Cable ferrules No.3
+

cab9325-E12
£2.25 (£2.70 inc VAT)
OEM: 76-9325, 97-2659, H2659
BSA/Triumph Cable Guide Grommet - Top Yoke - A50, A65, B25, B44, C25 + T250, TR25W - Circa 1967-70 Locates within the bracket that attaches to the top...
+

fkcab633-E12
£1.99 (£2.39 inc VAT)
Cable Adjuster - Universal - 5/16" 5/16" Cable Adjuster with lock nut. Total length - 1+5/8" (41mm) Thread diameter - 5/16" (8mm)
+

amal-adj001
£1.95 (£2.34 inc VAT)
OEM: 4/035, 9/035, 99-1024, 99-7096
Amal Carburettor Cable Adjuster For 600, 900, 276, 376, 389 series Amal carburettors Screws into the top cap to adjust the cable. OEM: 4/035, 9/035,...
+

fkcab00-E12
£1.95 (£2.34 inc VAT)
Pear type solderless cable nipple Length: 1/2"(13mm), Head: 9/32"(7mm), Neck: 5/32"(4mm) Sold Singly.
+

fkcab01-E12
£1.95 (£2.34 inc VAT)
Barrel type solderless cable nipple Length: 3/8"(9.5mm), Diameter: 1/4"(6mm) Sold singly.
+

fkcab02-E12
£1.95 (£2.34 inc VAT)
Barrel type solderless cable nipple Length: 7/16"(11mm), Diameter: 11/32"(9mm) Sold Singly.
+

clevis14-1116-E12
£1.95 (£2.34 inc VAT)
Clevis Pin 1/4" x 11/16" 1/4" (6mm) diameter, 11/16" (15mm) shaft length Suitable for cable end clevis. To secure the cable end to a lever
+

cab-nip708
£1.95 (£2.34 inc VAT)
Barrel type Solderless Cable Nipple - 5/16" (8mm) Barrel Length: 3/8" (10mm), OD: 5/16" (8mm) Cable hole: 2.5mm Feed the cable through the hole and...
+

cab-nip700-E12
£1.95 (£2.34 inc VAT)
Pear type solderless cable nipple - 1/4" (7mm) Pear type solderless cable nipple, feed cable through and tighten screw to lock cable in place. Length:...
+

cab366-E12
£1.95 (£2.34 inc VAT)
OEM: 366/2
Cable Stop - Small Amal Type - 366/2 Small slotted cable stop, standard Amal type, fits into the twistgrip to retain the end of the throttle cable....
+

tie132-T13
£1.95 (£2.34 inc VAT)
20" Long Black Plastic Cable Ties - Universal - Pack of 12 Self-locking mechanism for easy fit and adjustment. Zip Clip, zipclips. Length: 20" (51cm)...
+

clutch043c-B23
£1.75 (£2.10 inc VAT)
OEM: 57-1646, 68-3264
Clutch Cable Adjuster Sleeve /Rubber Boot For Triumph 650cc and 750cc models OEM: 57-1646, 68-3264, T1646
+

fkcab23-E12
£1.45 (£1.74 inc VAT)
Barrel type cable nipple Length: 3/8"(9mm), Diameter: 3/8"(9mm) Sold Singly. - Suit some clutch and brake levers.
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.