.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Control Parts

fkcab10-E12
£0.40 (£0.48 inc VAT)
Cable End Ferrule No.0 Suitable for outer casing ends. Priced singly.
+

fkcab11-E12
£0.40 (£0.48 inc VAT)
Cable End Ferrule No.1 Suitable for outer casing ends. Priced singly.
+

fkcab13-E12
£0.40 (£0.48 inc VAT)
Cable End Ferrule No.3 Suitable for outer casing ends. Priced singly.
+

fkcab14-E12
£0.40 (£0.48 inc VAT)
Cable End Ferrule No.4 Suitable for outer casing ends. Priced singly.
+

clip3659-E12
£0.45 (£0.54 inc VAT)
OEM: 60-3659, D3659
Triumph Clutch Cable to Side Panel Spring Clip - T150 Models From 1973 Onwards Locates on the top edge of the left hand / drive side panel to position...
+

fkcab12-E12
£0.50 (£0.60 inc VAT)
Cable End Ferrule No.2 Suitable for outer casing ends. Priced singly.
+

fkcab29-E12
£0.50 (£0.60 inc VAT)
Tube type cable nipple Length: 1/8"(3mm), Diameter: 1/8"(3mm) Sold each - Suit Carburettor Air and Throttle slide cable ends.
+

cab-pear470-E12
£0.55 (£0.66 inc VAT)
Pear type cable nipple (short) No.2 Suit No.2 wire. Length: 3/16"(5mm), Head: 1/4"(6mm), Neck: 1/8"(3.5mm) Sold Singly. - Suit various controls.
+

fkcab17-E12
£0.60 (£0.72 inc VAT)
Ball type cable nipple Diameter: 3/16"(4.5mm) Sold Singly. - Suit some exhaust lifter levers.
+

fkcab26-E12
£0.60 (£0.72 inc VAT)
Pear type cable nipple No.2 Suit no.2 wire. Length: 5/16"(8mm), Head: 7/32"(5.5mm), Neck: 1/8"(3.5mm) Sold Singly. - Suit various controls.
+

cab-pear480-E12
£0.60 (£0.72 inc VAT)
Pear type cable nipple, to fit cable No.2 or No.3 Suit No.2 or No.3 wire. Length: 3/8"(9mm), Head: 1/4"(6mm), Neck: 1/8"(3.5mm) Sold Singly. - Suit...
+

cab-pear475-E12
£0.65 (£0.78 inc VAT)
Pear Type Cable Nipple - No.3 Suitable for  No.3 cable wire. Length: 11mm Head: 5.6mm Neck: 3.75mm ID: 2.5mm Sold Singly.
+

nut3955-B14
£0.65 (£0.78 inc VAT)
OEM: 82-3955, F3955
3/8" CEI Self-Locking Nyloc Nut 3/8" CEI self-locking nyloc nut. deep type - 26TPI OEM: 82-3955, F3955
+

ferr-A3-E12
£0.65 (£0.78 inc VAT)
Splicing / Swaging Ferrule - 3.5mm Wire To be swaged onto wire or used to make a loop or eyelet. Length: 3/8" (10mm) ID: 5/16" (7.6mm) x 1/8" (3.6mm)...
+

ferr-A1.5-E12
£0.65 (£0.78 inc VAT)
Splicing / Swaging Ferrule - 1.5mm Wire To be swaged onto wire or used to make a loop or eyelet. Length: 1/4" (6mm) ID: 1/8" (3.6mm) x 1/16" (1.9mm)...
+

ferr-A1-E12
£0.65 (£0.78 inc VAT)
Splicing / Swaging Ferrule - 1mm Wire To be swaged onto wire or used to make a loop or eyelet. Length: 3/16" (5mm) ID: 3/32" (2.3mm) x 1/16" (1.3mm)...
+

ferr-A2-E12
£0.65 (£0.78 inc VAT)
2mm Aluminium Splicing / Swaging Ferrule - Suitable for Wire up to 2.5mm Diameter Cable crimp / splicing ferrule which can be swaged onto wire or used to...
+

fkcab25-E12
£0.70 (£0.84 inc VAT)
Pear type cable nipple No.1 Suit no.1 wire. Length: 5/16"(8mm), Head: 7/32"(5.5mm), Neck: 1/8"(3.5mm) Sold Singly. - Suit various controls.
+

fkcab88
£0.70 (£0.84 inc VAT)
Inner Cable Wire No.0 12 strand cable. Diameter .050" (1.27mm) Price per Foot (12").
+

fkcab89
£0.70 (£0.84 inc VAT)
Inner Cable Wire No.1 19 strand cable. Diameter .062" (1.57mm) Price per Foot (12").
+

fkcab90
£0.70 (£0.84 inc VAT)
Inner Cable Wire No.2 19 strand cable. Diameter .075" (1.91mm) Price per Foot (12").
+

fkcab91
£0.70 (£0.84 inc VAT)
Inner Cable Wire No.3 19 strand cable. Diameter .085" (2.16mm) Price per Foot (12").
+

fkcab94
£0.70 (£0.84 inc VAT)
Outer Cable Casing No.0 Outside Diameter .160" (4.1mm) Price per Foot (12").
+

fkcab27-E12
£0.75 (£0.90 inc VAT)
Pear type cable nipple No.3 Suit no.3 wire. Length: 3/8"(9mm), Head: 1/4"(7mm), Neck: 5/32"(4mm) Sold Singly. - Suit Clutch cable at gearbox end.
+

fkcab30-E12
£0.75 (£0.90 inc VAT)
Barrel type cable nipple Length: 1/2"(13mm), Diameter: 3/8"(9mm) Sold Singly. - Suit some clutch and brake levers. Fits Cable size No.3, and a very tight No.4
+

fkcab95
£0.75 (£0.90 inc VAT)
Outer Cable Casing No.1 Outside Diameter .190" (4.8mm) Price per Foot (12").
+

hbolt1580-E12
£0.75 (£0.90 inc VAT)
OEM: 97-1580, H1580
Triumph/BSA Handlebar P Clamp Rubber Buffer Washer - 500/650/750cc Models Rubber buffer washer for use with handlebar eyebolt 97-1523 or 97-2291. Two...
+

cab-nip706-E12
£0.75 (£0.90 inc VAT)
Barrel type solderless cable nipple - 1/4 inch (6mm) Barrel type solderless cable nipple Barrel Length excluding screw: 5/16" (8mm), Diameter: 1/4" (6mm)...
+

cab8245-E12
£0.75 (£0.90 inc VAT)
OEM: 82-8245, F8245
Triumph Starlock Washer for Front Cable Holder / Retainer - OIF Models 5/16" starlock washer used to fix cable retainer that clips into a hole in the...
+

nut1903-B14
£0.75 (£0.90 inc VAT)
OEM: 14-1903
3/8" UNF Self-Locking Nyloc Nut 3/8" UNF self-locking Nyloc nut. 24TPI OEM: 14-1903
+

cab446-E12
£0.75 (£0.90 inc VAT)
Brass Barrel Type Cable Nipple - 1/4" Long x 1/4" Diameter - Suitable For Standard Twistgrips Length: 1/4" (6.4mm) Diameter: 1/4" (6mm) Sold individually.
+

screw2191-E12
£0.75 (£0.90 inc VAT)
OEM: 21-2191, S2191
Triumph Front Brake Lever Pivot Screw - 750cc Twins and Triples Circa 1973-82 Brake lever to front brake master cylinder mounting body pivot screw....
+

screw0689-A4
£0.75 (£0.90 inc VAT)
OEM: 97-0689, H689
Triumph Nacelle Fitting / Handlebar Switch to Lever Clamp Screw - 4BA x 1/4" Domed head slotted screw as used on pre unit and unit models to attach the...
+

fkcab18-E12
£0.80 (£0.96 inc VAT)
Ball type cable nipple Diameter: 1/4"(6mm) Sold Singly. - Suit some exhaust lifter levers.
+

fkcab19-E12
£0.80 (£0.96 inc VAT)
Barrel type cable nipple Length: 3/16"(5mm), Diameter: 3/16"(5mm) Sold Singly. - Suit some Twistgips.
+

fkcab20-E12
£0.80 (£0.96 inc VAT)
Drum type cable nipple Length: 1/8"(3mm), Diameter: 1/4"(6mm) Sold Singly. - Suit some air and magneto levers and twistgips.
+

fkcab92
£0.80 (£0.96 inc VAT)
Inner Cable Wire No.4 19 strand cable. Diameter .104" (2.64mm) Price per Foot (12").
+

fkcab93
£0.80 (£0.96 inc VAT)
Inner Cable Wire No.5 19 strand cable. Diameter .125" (3.18mm) Price per Foot (12").
+

fkcab96
£0.80 (£0.96 inc VAT)
Outer Cable Casing No.2 Outside Diameter .210" (5.3mm) Price per Foot (12").
+

fkcab97
£0.80 (£0.96 inc VAT)
Outer Cable Casing No.3 Outside Diameter .225" (5.7mm) Price per Foot (12").
+

fkcab98
£0.80 (£0.96 inc VAT)
Outer Cable Casing No.4 Outside Diameter .250" (6.4mm) Price per Foot (12").
+

fkcab21-E12
£0.85 (£1.02 inc VAT)
Barrel type cable nipple Length: 3/8"(9mm), Diameter: 1/4"(6mm) Sold Singly. - Suit some clutch and brake levers.
+

cab0973-E12
£0.85 (£1.02 inc VAT)
Universal Rubber Cable / Hose Guide - 20mm x 12mm Useful frame protector that can be attached to cables as required. Suitable for fitting onto most...
+

fkcab24-E12
£0.95 (£1.14 inc VAT)
Drum type cable nipple Length: 1/4"(6.5mm), Diameter: 9/32" "(7.15mm) Sold Singly. Suit some twist grips.
+

fkcab28-E12
£0.95 (£1.14 inc VAT)
Pear type cable nipple No.3 Suit no.3 wire. Length: 19/32"(15mm), Head: 7/32"(5.5mm), Neck: 1/8"(3.5mm) Sold Singly. - Suit slotted roller lever end.
+

cab-nip101-E12
£0.95 (£1.14 inc VAT)
Split / Slotted Barrel Nipple - 5/16" (8mm) Outside Diameter Suitable for some clutch and brake levers - for use with cables with a pear nipple end...
+

hwash1335-E12
£0.95 (£1.14 inc VAT)
OEM: 82-1335, F1335
Triumph/BSA Handlebar P Clamp Top Distance Washer - 500/650/750cc Models Top bolt washer for use with handlebar eyebolt 97-1523 or 97-2291. Chrome...
+

hwash1581-E12
£0.95 (£1.14 inc VAT)
OEM: 97-1581, H1581
Triumph/BSA Handlebar P Clamp Lower Distance Piece - 500/650/750cc Models Distance piece for use with handlebar eyebolt 97-1523 or 97-2291. Chrome...
+

screw1188-E12
£0.95 (£1.14 inc VAT)
OEM: 99-1188, 54115246
Triumph/BSA Handlebar Switch Screw - OIF Models With Lucas Switch Gear - Circa 1971-74 Fillister head screw used to secure the handlebar switch halves on...
+

cab-nip-bn89L-E12
£0.95 (£1.14 inc VAT)
Brass Barrel Cable Nipple - Length 9mm x 8mm (5/16") Diameter Suitable for some clutch and brake levers, for use with cables with a pear nipple end...
+

cab-nip-bn1015L-E12
£0.95 (£1.14 inc VAT)
Zinc Plated Barrel Cable Nipple - Length 15mm x 10mm (3/8") Diameter Suitable for some clutch and brake levers, for use with cables with a pear nipple...
+

cab-nip-bn813L-E12
£0.95 (£1.14 inc VAT)
Zinc Plated Barrel Cable Nipple - Length 13mm x 8mm (5/16") Diameter Suitable for some clutch and brake levers, for use with cables with a pear nipple...
+

cab-nip-bn1010L-E12
£0.95 (£1.14 inc VAT)
Zinc Plated Barrel Cable Nipple - Length 10mm x 10mm (3/8") Diameter Suitable for some clutch and brake levers, for use with cables with a pear nipple...
+

fkcab22-E12
£1.00 (£1.20 inc VAT)
Barrel type cable nipple Length: 3/8"(9mm), Diameter: 5/16" Sold each - Suit some clutch and brake levers.
+

hbolt1529-E12
£1.10 (£1.32 inc VAT)
OEM: 97-1529, H1529
Triumph/BSA Handlebar P Clamp Hemispherical Washer  - 500/650/750cc Models Hemispherical domed washer for use with handlebar eyebolt 97-1523 or...
+

hbolt2221-E12
£1.25 (£1.50 inc VAT)
OEM: 97-2221, H2221
Triumph/BSA Handlebar P Clamp Lower Cupped Washer - 500/650/750cc Models Lower cupped washer for use with handlebar eyebolt 97-1523 or 97-2291. Two...
+

cab-nip709-E12
£1.25 (£1.50 inc VAT)
Barrel type solderless cable nipple - 11/32 inch (9mm) Barrel type solderless cable nipple Barrel Length excluding bolt: 5/8" (16mm), Diameter: 11/32"...
+

cab-nip613
£1.25 (£1.50 inc VAT)
Barrel Type Solderless Cable Nipple - 3/8" Outside Diameter OD: 3/8" (8.8mm) Length excluding threaded screw: 7/16" (11mm) Overall length: 9/16"  (14.3mm)...
+

hbolt0589-E12
£1.25 (£1.50 inc VAT)
OEM: 21-0589, S589
Triumph Handlebar P Clamp Bolt -  UNF Thread - 500/650/750cc Models - 1968 Onwards Top bolt for use with handlebar P clamp 97-2291. Domed head - Plated....
+

hwash1708-E12
£1.25 (£1.50 inc VAT)
OEM: 97-1708, H1708
Triumph Handlebar P Clamp Top Cupped Washer - 500/650/750cc Models Top bolt cupped washer for use with handlebar eyebolt 97-1523 or 97-2291. Chrome...
+

fkcab23-E12
£1.45 (£1.74 inc VAT)
Barrel type cable nipple Length: 3/8"(9mm), Diameter: 3/8"(9mm) Sold Singly. - Suit some clutch and brake levers.
+

hbolt1425-E12
£1.45 (£1.74 inc VAT)
OEM: 97-1425
Handle Bar Clamp Sleeve - BSA, Triumph Clamp spacer for use with 'P' clamp 97-2291 4 Required per set Sold each (1) OEM: 97-1425
+

amal-adj102
£1.45 (£1.74 inc VAT)
OEM: 5/077, 9/077, 99-7097, 99-0224, 06-7972
Amal Carburettor Cable Adjuster Lock Nut For 600, 900, 276, 376, 389 series Amal carburettors Locks the screw in the top cap to adjust the cable. OEM:...
+

tie128-T5
£1.45 (£1.74 inc VAT)
12" Long Black Plastic Cable Ties - Universal - Pack of 40 Self-locking mechanism for easy fit and adjustment. Zip Clip, zipclips. Length: 12" (30.5cm)...
+

cab5090-E12
£1.45 (£1.74 inc VAT)
OEM: 40-5090, 97-2654, H2654
BSA/Triumph Wire Cable Guide - A50, A65, B25, B44, C25 + T250, TR25W - Circa 1967-70 Locates on the back of the lower fork pinch bolt to retain the...
+

hbolt0436-E12
£1.45 (£1.74 inc VAT)
OEM: 97-0436, H436
Triumph Handlebar Cap Clamping Bolt - Pre Unit 500/650cc Models Circa 1946-62 Handlebar to top lug clamp cap bolt - correct fitment on pre unit models...
+

clutch043c-B23
£1.75 (£2.10 inc VAT)
OEM: 57-1646, 68-3264
Clutch Cable Adjuster Sleeve /Rubber Boot For Triumph 650cc and 750cc models OEM: 57-1646, 68-3264, T1646
+

amal-adj001
£1.95 (£2.34 inc VAT)
OEM: 4/035, 9/035, 99-1024, 99-7096
Amal Carburettor Cable Adjuster For 600, 900, 276, 376, 389 series Amal carburettors Screws into the top cap to adjust the cable. OEM: 4/035, 9/035,...
+

fkcab00-E12
£1.95 (£2.34 inc VAT)
Pear type solderless cable nipple Length: 1/2"(13mm), Head: 9/32"(7mm), Neck: 5/32"(4mm) Sold Singly.
+

fkcab01-E12
£1.95 (£2.34 inc VAT)
Barrel type solderless cable nipple Length: 3/8"(9.5mm), Diameter: 1/4"(6mm) Sold singly.
+

fkcab02-E12
£1.95 (£2.34 inc VAT)
Barrel type solderless cable nipple Length: 7/16"(11mm), Diameter: 11/32"(9mm) Sold Singly.
+

rubber907-E12
£1.95 (£2.34 inc VAT)
OEM: 97-0669, H669
Handlebar Rubber Grommet - Triumph Nacelle Type As fitted on Triumph 3TA/5TA models etc Sold each (1) OEM: 97-0669, H669
+

clevis14-1116-E12
£1.95 (£2.34 inc VAT)
Clevis Pin 1/4" x 11/16" 1/4" (6mm) diameter, 11/16" (15mm) shaft length Suitable for cable end clevis. To secure the cable end to a lever
+

cab-nip708
£1.95 (£2.34 inc VAT)
Barrel type Solderless Cable Nipple - 5/16" (8mm) Barrel Length: 3/8" (10mm), OD: 5/16" (8mm) Cable hole: 2.5mm Feed the cable through the hole and...
+

cab-nip700-E12
£1.95 (£2.34 inc VAT)
Pear type solderless cable nipple - 1/4" (7mm) Pear type solderless cable nipple, feed cable through and tighten screw to lock cable in place. Length:...
+

hbolt1340-E12
£1.95 (£2.34 inc VAT)
OEM: 97-1340, H1340
Triumph Handlebar P Clamp Bolt -  BSF Thread - 500/650cc Models Circa 1963-69 Top bolt for use with handlebar P clamp 97-1523. Domed head - chrome...
+

cab366-E12
£1.95 (£2.34 inc VAT)
OEM: 366/2
Cable Stop - Small Amal Type - 366/2 Small slotted cable stop, standard Amal type, fits into the twistgrip to retain the end of the throttle cable....
+

tie132-T13
£1.95 (£2.34 inc VAT)
20" Long Black Plastic Cable Ties - Universal - Pack of 12 Self-locking mechanism for easy fit and adjustment. Zip Clip, zipclips. Length: 20" (51cm)...
+

fkcab633-E12
£1.99 (£2.39 inc VAT)
Cable Adjuster - Universal - 5/16" 5/16" Cable Adjuster with lock nut. Total length - 1+5/8" (41mm) Thread diameter - 5/16" (8mm)
+

fkcab631-E12
£2.25 (£2.70 inc VAT)
Cable Adjuster 1+1/8" x 1/4" CEI Thread Will fit Cable ferrules No.2
+

fkcab632-E12
£2.25 (£2.70 inc VAT)
Cable Adjuster 1+1/2" x 1/4" CEI Thread Will fit Cable ferrules No.3
+

cab9325-E12
£2.25 (£2.70 inc VAT)
OEM: 76-9325, 97-2659, H2659
BSA/Triumph Cable Guide Grommet - Top Yoke - A50, A65, B25, B44, C25 + T250, TR25W - Circa 1967-70 Locates within the bracket that attaches to the top...
+

nut427-G15
£2.45 (£2.94 inc VAT)
OEM: 97-1701, H1701
Triumph T100/TR6 etc Instrument Mount Sleeve Nut. Sold single, Price for one. OEM: 97-1701, H1701
+

cab8506-E12
£2.45 (£2.94 inc VAT)
OEM: 90-8506
Cable Stop / Ferrule - Brake & Clutch Cable - Bantam Type for Welded Lug Bars Slotted cable ferrule to stop the cables pulling through the handlebar...
+

clip4112H-E12
£2.45 (£2.94 inc VAT)
OEM: 97-4112, H4112
Handlebar Cable Clip - Universal Fit for 7/8" Bars Correct fitment for late Triumph, BSA & Norton Models, but universal fit for all 7/8" bars. Note:...
+

off-lev-0110.02-E12
£2.45 (£2.94 inc VAT)
OEM: 0110.02.073
Cable Adjuster - Domino Decompression Lever + Universal Fit - M5 Thread Steel cable adjuster with lockring nut - M5 thread. Universal fit, suitable for...
+

screw8813-E12
£2.45 (£2.94 inc VAT)
OEM: 29-8813, 18/087, 02-0510, 60-0964, D964
Handlebar Lever Fulcrum Pivot Screw + BSA Brake Rod Linkage and Front Brake Cable to Arm Clutch and brake lever pivot screw as used with lugged handlebars...
+

wtf-cabpart008
£2.45 (£2.94 inc VAT)
Clevis Pin - Yamaha Front Brake Cable to Brake Arm + Universal Use Genuine Yamaha front brake cable to brake arm clevis pin. Attaches the cable to...
+

fkcab607-E12
£2.95 (£3.54 inc VAT)
OEM: 99-0241, 16/011
Cable Stop Large slotted cable stop, standard Doherty and Amal, for twistgrip Fits into the Twistgrip to retain the end of the throttle cable. Diameters:...
+

fkcabtie03b-4+1/2"-E12
£2.95 (£3.54 inc VAT)
Pack of 10 Black Rubber Cable Ties - 3" or 4+1/2" Ten quality black rubber authentic style cable ties Available in a choice of sizes - please select...
 

fkcabtie03g-E12
£2.95 (£3.54 inc VAT)
Cable Ties Grey 4" Rubber - 10 Ties
+

fktach4-G15
£2.95 (£3.54 inc VAT)
OEM: 60-2596
Speedometer/Tachometer Mounting Rubber. Suit smaller clocks, BSA and Triumph. ID: 2+1/2", OD: 3", Depth 2+1/2" (all approx.) Rubber binnacle for BSA/Triumph...
+

tie604-E12
£2.95 (£3.54 inc VAT)
OEM: 82-9918
8" Long Alloy Cable Ties Triumph - Universal - Pack of 5 Triumph O.E.M. style Alloy Cable Ties Approximately 5" Long OEM: 82-9918
+

clutch046-B23
£2.95 (£3.54 inc VAT)
OEM: 57-0495, T495
Clutch Lever Rubber - Triumph - 57-0495, T495 Triumph Pre-Unit Clutch lever rubber boot. OEM: 57-0495, T495
+

speedo309-G15
£2.95 (£3.54 inc VAT)
OEM: 02-1798
AJS, Matchless Speedo Mounting Rubber - 02-1798 AJS, Matchless speedometer mounting grommet. OEM: 02-1798
+

adj1006-E12
£2.95 (£3.54 inc VAT)
OEM: AM18/1006
Doherty Type Cable Adjuster - 207 / 208PA Series Levers Groove cut through side to allow fitting after cable made up. Total length: 1+19/32" (40.5mm)...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.