.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Control Parts

fkcab10-E12
£0.40 (£0.48 inc VAT)
Cable End Ferrule No.0 Suitable for outer casing ends. Priced singly.
+

fkcab11-E12
£0.40 (£0.48 inc VAT)
Cable End Ferrule No.1 Suitable for outer casing ends. Priced singly.
+

fkcab13-E12
£0.40 (£0.48 inc VAT)
Cable End Ferrule No.3 Suitable for outer casing ends. Priced singly.
+

fkcab14-E12
£0.40 (£0.48 inc VAT)
Cable End Ferrule No.4 Suitable for outer casing ends. Priced singly.
+

clip3659-E12
£0.45 (£0.54 inc VAT)
OEM: 60-3659, D3659
Triumph Clutch Cable to Side Panel Spring Clip - T150 Models From 1973 Onwards Locates on the top edge of the left hand / drive side panel to position...
+

fkcab12-E12
£0.50 (£0.60 inc VAT)
Cable End Ferrule No.2 Suitable for outer casing ends. Priced singly.
+

fkcab29-E12
£0.50 (£0.60 inc VAT)
Tube type cable nipple Length: 1/8"(3mm), Diameter: 1/8"(3mm) Sold each - Suit Carburettor Air and Throttle slide cable ends.
+

cab-pear470-E12
£0.55 (£0.66 inc VAT)
Pear type cable nipple (short) No.2 Suit No.2 wire. Length: 3/16"(5mm), Head: 1/4"(6mm), Neck: 1/8"(3.5mm) Sold Singly. - Suit various controls.
+

fkcab17-E12
£0.60 (£0.72 inc VAT)
Ball type cable nipple Diameter: 3/16"(4.5mm) Sold Singly. - Suit some exhaust lifter levers.
+

fkcab26-E12
£0.60 (£0.72 inc VAT)
Pear type cable nipple No.2 Suit no.2 wire. Length: 5/16"(8mm), Head: 7/32"(5.5mm), Neck: 1/8"(3.5mm) Sold Singly. - Suit various controls.
+

cab-pear480-E12
£0.60 (£0.72 inc VAT)
Pear type cable nipple, to fit cable No.2 or No.3 Suit No.2 or No.3 wire. Length: 3/8"(9mm), Head: 1/4"(6mm), Neck: 1/8"(3.5mm) Sold Singly. - Suit...
+

cab-pear475-E12
£0.65 (£0.78 inc VAT)
Pear Type Cable Nipple - No.3 Suitable for  No.3 cable wire. Length: 11mm Head: 5.6mm Neck: 3.75mm ID: 2.5mm Sold Singly.
+

nut3955-B14
£0.65 (£0.78 inc VAT)
OEM: 82-3955, F3955
3/8" CEI Self-Locking Nyloc Nut 3/8" CEI self-locking nyloc nut. deep type - 26TPI OEM: 82-3955, F3955
+

ferr-A3-E12
£0.65 (£0.78 inc VAT)
Splicing / Swaging Ferrule - 3.5mm Wire To be swaged onto wire or used to make a loop or eyelet. Length: 3/8" (10mm) ID: 5/16" (7.6mm) x 1/8" (3.6mm)...
+

ferr-A1.5-E12
£0.65 (£0.78 inc VAT)
Splicing / Swaging Ferrule - 1.5mm Wire To be swaged onto wire or used to make a loop or eyelet. Length: 1/4" (6mm) ID: 1/8" (3.6mm) x 1/16" (1.9mm)...
+

ferr-A1-E12
£0.65 (£0.78 inc VAT)
Splicing / Swaging Ferrule - 1mm Wire To be swaged onto wire or used to make a loop or eyelet. Length: 3/16" (5mm) ID: 3/32" (2.3mm) x 1/16" (1.3mm)...
+

ferr-A2-E12
£0.65 (£0.78 inc VAT)
2mm Aluminium Splicing / Swaging Ferrule - Suitable for Wire up to 2.5mm Diameter Cable crimp / splicing ferrule which can be swaged onto wire or used to...
+

fkcab25-E12
£0.70 (£0.84 inc VAT)
Pear type cable nipple No.1 Suit no.1 wire. Length: 5/16"(8mm), Head: 7/32"(5.5mm), Neck: 1/8"(3.5mm) Sold Singly. - Suit various controls.
+

fkcab88
£0.70 (£0.84 inc VAT)
Inner Cable Wire No.0 12 strand cable. Diameter .050" (1.27mm) Price per Foot (12").
+

fkcab89
£0.70 (£0.84 inc VAT)
Inner Cable Wire No.1 19 strand cable. Diameter .062" (1.57mm) Price per Foot (12").
+

fkcab90
£0.70 (£0.84 inc VAT)
Inner Cable Wire No.2 19 strand cable. Diameter .075" (1.91mm) Price per Foot (12").
+

fkcab91
£0.70 (£0.84 inc VAT)
Inner Cable Wire No.3 19 strand cable. Diameter .085" (2.16mm) Price per Foot (12").
+

fkcab94
£0.70 (£0.84 inc VAT)
Outer Cable Casing No.0 Outside Diameter .160" (4.1mm) Price per Foot (12").
+

fkcab27-E12
£0.75 (£0.90 inc VAT)
Pear type cable nipple No.3 Suit no.3 wire. Length: 3/8"(9mm), Head: 1/4"(7mm), Neck: 5/32"(4mm) Sold Singly. - Suit Clutch cable at gearbox end.
+

fkcab30-E12
£0.75 (£0.90 inc VAT)
Barrel type cable nipple Length: 1/2"(13mm), Diameter: 3/8"(9mm) Sold Singly. - Suit some clutch and brake levers. Fits Cable size No.3, and a very tight No.4
+

fkcab95
£0.75 (£0.90 inc VAT)
Outer Cable Casing No.1 Outside Diameter .190" (4.8mm) Price per Foot (12").
+

hbolt1580-E12
£0.75 (£0.90 inc VAT)
OEM: 97-1580, H1580
Triumph/BSA Handlebar P Clamp Rubber Buffer Washer - 500/650/750cc Models Rubber buffer washer for use with handlebar eyebolt 97-1523 or 97-2291. Two...
+

cab-nip706-E12
£0.75 (£0.90 inc VAT)
Barrel type solderless cable nipple - 1/4 inch (6mm) Barrel type solderless cable nipple Barrel Length excluding screw: 5/16" (8mm), Diameter: 1/4" (6mm)...
+

cab8245-E12
£0.75 (£0.90 inc VAT)
OEM: 82-8245, F8245
Triumph Starlock Washer for Front Cable Holder / Retainer - OIF Models 5/16" starlock washer used to fix cable retainer that clips into a hole in the...
+

nut1903-B14
£0.75 (£0.90 inc VAT)
OEM: 14-1903
3/8" UNF Self-Locking Nyloc Nut 3/8" UNF self-locking Nyloc nut. 24TPI OEM: 14-1903
+

cab446-E12
£0.75 (£0.90 inc VAT)
Brass Barrel Type Cable Nipple - 1/4" Long x 1/4" Diameter - Suitable For Standard Twistgrips Length: 1/4" (6.4mm) Diameter: 1/4" (6mm) Sold individually.
+

screw2191-E12
£0.75 (£0.90 inc VAT)
OEM: 21-2191, S2191
Triumph Front Brake Lever Pivot Screw - 750cc Twins and Triples Circa 1973-82 Brake lever to front brake master cylinder mounting body pivot screw....
+

screw0689-A4
£0.75 (£0.90 inc VAT)
OEM: 97-0689, H689
Triumph Nacelle Fitting / Handlebar Switch to Lever Clamp Screw - 4BA x 1/4" Domed head slotted screw as used on pre unit and unit models to attach the...
+

fkcab18-E12
£0.80 (£0.96 inc VAT)
Ball type cable nipple Diameter: 1/4"(6mm) Sold Singly. - Suit some exhaust lifter levers.
+

fkcab19-E12
£0.80 (£0.96 inc VAT)
Barrel type cable nipple Length: 3/16"(5mm), Diameter: 3/16"(5mm) Sold Singly. - Suit some Twistgips.
+

fkcab20-E12
£0.80 (£0.96 inc VAT)
Drum type cable nipple Length: 1/8"(3mm), Diameter: 1/4"(6mm) Sold Singly. - Suit some air and magneto levers and twistgips.
+

fkcab92
£0.80 (£0.96 inc VAT)
Inner Cable Wire No.4 19 strand cable. Diameter .104" (2.64mm) Price per Foot (12").
+

fkcab93
£0.80 (£0.96 inc VAT)
Inner Cable Wire No.5 19 strand cable. Diameter .125" (3.18mm) Price per Foot (12").
+

fkcab96
£0.80 (£0.96 inc VAT)
Outer Cable Casing No.2 Outside Diameter .210" (5.3mm) Price per Foot (12").
+

fkcab97
£0.80 (£0.96 inc VAT)
Outer Cable Casing No.3 Outside Diameter .225" (5.7mm) Price per Foot (12").
+

fkcab98
£0.80 (£0.96 inc VAT)
Outer Cable Casing No.4 Outside Diameter .250" (6.4mm) Price per Foot (12").
+

fkcab21-E12
£0.85 (£1.02 inc VAT)
Barrel type cable nipple Length: 3/8"(9mm), Diameter: 1/4"(6mm) Sold Singly. - Suit some clutch and brake levers.
+

cab0973-E12
£0.85 (£1.02 inc VAT)
Universal Rubber Cable / Hose Guide - 20mm x 12mm Useful frame protector that can be attached to cables as required. Suitable for fitting onto most...
+

fkcab24-E12
£0.95 (£1.14 inc VAT)
Drum type cable nipple Length: 1/4"(6.5mm), Diameter: 9/32" "(7.15mm) Sold Singly. Suit some twist grips.
+

fkcab28-E12
£0.95 (£1.14 inc VAT)
Pear type cable nipple No.3 Suit no.3 wire. Length: 19/32"(15mm), Head: 7/32"(5.5mm), Neck: 1/8"(3.5mm) Sold Singly. - Suit slotted roller lever end.
+

cab-nip101-E12
£0.95 (£1.14 inc VAT)
Split / Slotted Barrel Nipple - 5/16" (8mm) Outside Diameter Suitable for some clutch and brake levers - for use with cables with a pear nipple end...
+

hwash1335-E12
£0.95 (£1.14 inc VAT)
OEM: 82-1335, F1335
Triumph/BSA Handlebar P Clamp Top Distance Washer - 500/650/750cc Models Top bolt washer for use with handlebar eyebolt 97-1523 or 97-2291. Chrome...
+

hwash1581-E12
£0.95 (£1.14 inc VAT)
OEM: 97-1581, H1581
Triumph/BSA Handlebar P Clamp Lower Distance Piece - 500/650/750cc Models Distance piece for use with handlebar eyebolt 97-1523 or 97-2291. Chrome...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.