.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Control Parts

cabkit
£7.95 (£9.54 inc VAT)
Emergency Cable Repair Kit - Inner Wire + Various Nipples Emergency cable repair kit for temporary fixing throttle or clutch cables. 1.6M 1.5mm cable....
+

clutch043c-B23
£1.75 (£2.10 inc VAT)
OEM: 57-1646, 68-3264
Clutch Cable Adjuster Sleeve /Rubber Boot For Triumph 650cc and 750cc models OEM: 57-1646, 68-3264, T1646
+

amal-adj001
£1.95 (£2.34 inc VAT)
OEM: 4/035, 9/035, 99-1024, 99-7096
Amal Carburettor Cable Adjuster For 600, 900, 276, 376, 389 series Amal carburettors Screws into the top cap to adjust the cable. OEM: 4/035, 9/035,...
+

fklev098-E12
£3.95 (£4.74 inc VAT)
Cable Adjuster Set Slide Type Groove cut through side to allow fitting after cable made up. Total length - 1+3/8" (35mm) Thread diameter - 3/8" (10mm)
+

fktwist124-E7
£15.95 (£19.14 inc VAT)
Standard Universal Twist Grip With Amal Type Grips - 7/8" Bars Suitable for a throttle cable with a 1/4" barrel type nipple. Throttle assembly/twistgrip...
+

cable-CBK042-E8
£6.95 (£8.34 inc VAT)
Universal Clutch/Brake Cable. 57" outer case length. Comes with 3/8" Barrel Nipple fitted, loose Pear Nipple ready for soldering, and spare ferrule....
+

fktach071-G15
£6.95 (£8.34 inc VAT)
OEM: 60-2600, D2600
Speedometer/Tachometer Mounting Rubber / Binnacle - Large Rubber binnacle for Triumph TR6/T120/T140, OIF T160 and late BSA models including A65 OIF,...

clevis14-1116-E12
£1.95 (£2.34 inc VAT)
Clevis Pin 1/4" x 11/16" 1/4" (6mm) diameter, 11/16" (15mm) shaft length Suitable for cable end clevis. To secure the cable end to a lever
+

off-lev2930
£24.95 (£29.94 inc VAT)
OEM: 534/951, 534/952
Pair of Replica Amal Alloy Clutch and Brake Levers - Complete Assembly - 7/8" Bars Clutch and brake lever to fit 22mm (7/8") handlebars. Cast alloy...
+

fkgrip042-E17
£6.45 (£7.74 inc VAT)
Rubber Handlebar Grips 7/8" - Pair Amal Replica Type Length = 5" ID = 1" for throttle and 7/8" for other side
+

fktch209-CP_G15
£10.95 (£13.14 inc VAT)
OEM: 97-4026
Speedometer / Tachometer Mounting Bracket Suit Triumph/BSA. Small hole: 1+3/16", Large hole: 3+3/4" This bracket requires the large mounting rubber....
 

beston-grip041-E17
£5.95 (£7.14 inc VAT)
OEM: 97-2124 ,97-2125, 06-1879, 19-7221, 19-7222
Rubber Handlebar Grips - Pair Beston Cushion Type Replica 7/8" Beston type handlebar grips. As fitted to Norton Commando, BSA...
+

fklamp119-A23
£9.95 (£11.94 inc VAT)
Smiths Speedo/Tacho Bulb Holder Replacement bulb holder to fit in rear of Chronometric speedometer and tachometer. Takes a bulb of 9mm diameter base....
+

amal-adj102
£1.45 (£1.74 inc VAT)
OEM: 5/077, 9/077, 99-7097, 99-0224, 06-7972
Amal Carburettor Cable Adjuster Lock Nut For 600, 900, 276, 376, 389 series Amal carburettors Locks the screw in the top cap to adjust the cable. OEM:...
+

cable299
£9.95 (£11.94 inc VAT)
OEM: 65-8714, A2/256
Magneto Cable - AJS, Ariel, BSA, Matchless, Norton Spring behind the magneto end barrel nipple + 1/4" drum nipple at the lever end. To Fit: BSA -...
 

amal-RKC/613
£2.95 (£3.54 inc VAT)
OEM: RKC/613, 4/035, 9/035, 5/077, 9/077
Genuine Amal Cable Adjuster and Lock Nut - RKC/613 For 600, 900, 276, 376, 389 series Amal carburettors. Screws into the top cap to adjust the cable....
+

off-cab-BRI1100
£20.95 (£25.14 inc VAT)
Universal Clutch/Brake Cable Kit - Inner and Outer Cable + 1/4" BSF Cable Adjuster, Nipples and Ferrules Inner wire and outer conduit plus a range of...
+

tach1929-G15
£2.95 (£3.54 inc VAT)
OEM: 97-1929, H1929
Triumph Speedo/Tacho Mounting Bracket Bush - 350/500/650cc Unit Models From 1964-70 Instrument bracket mounting metalastik bush. Mounts the twin gauges...
+

fklev009-E14
£15.95 (£19.14 inc VAT)
OEM: 18/454, 18/864, 42-8611, 66-8513, 105
Decompression / Exhaust Lifter Control Lever For 7/8" Handlebars - Flat End Exhaust valve lifter / decompression lever as used on many  British bikes -...
+

fkbar184a_CP
£24.95 (£29.94 inc VAT)
OEM: 65-4960
Handle Bars AJS, Matchless - Std Touring Diameter: 7/8" OEM: 65-4960, 02-1257 Please note this item may attract a higher rate of shipping, please see...
 

speedo-75-F14
£69.95 (£83.94 inc VAT)
OEM: 99-0159
Speedometer Grey Face Replica 15:12/1.25:1 Drive Ratio 1966-70 (unit twins with drive from wheel) Complete with bulb and socket holder. Suit some...

fkbar014-SS
£42.95 (£51.54 inc VAT)
OEM: 97-1870
Triumph Handlebars - USA Spec T120/TR6 Models Circa 1966-70  Chrome or Stainless Steel Tip to Tip: 33" Diameter: 7/8" Handles rake back 6" from centre...
 

fklev005-E14
£15.95 (£19.14 inc VAT)
OEM: 12/556, 12/161, 12/608, 66-8896, 60-3567, 60-3991, 60-4521, 60-3246
Air/Choke or Magneto Lever - Right Hand For 7/8" Handlebars - Ball End Right handed chrome plated air/choke lever as used on many British bikes - BSA,...
+

cable650
£8.95 (£10.74 inc VAT)
OEM: 67-8681
BSA Clutch Cable Suitable for following: BSA - A7 Standard, A10 (1948-58) A7 Twins (1958-59), A10 Standard (1955-58) B31,B32,B33,B44 (1949-58) Outer...
+

fkbar184b_CP
£24.95 (£29.94 inc VAT)
OEM: 65-4960
BSA Handlebars - A7, A10, A65 Standard Type Bars Tip to Tip: 29" Diameter: 7/8" Handles rake back 3" from centre Bar lift 2" from centre OEM:...
 

rubber907-E12
£1.95 (£2.34 inc VAT)
OEM: 97-0669, H669
Handlebar Rubber Grommet - Triumph Nacelle Type As fitted on Triumph 3TA/5TA models etc Sold each (1) OEM: 97-0669, H669
+

fkcab23-E12
£1.45 (£1.74 inc VAT)
Barrel type cable nipple Length: 3/8"(9mm), Diameter: 3/8"(9mm) Sold Singly. - Suit some clutch and brake levers.
+

cable281
£7.95 (£9.54 inc VAT)
OEM: 60-0823, 60-0683, 60-1818, 60-0500
Triumph Throttle Cable T120 Bonneville To suit Triumph - T100T Daytona (1967) long, T120 Bonneville (1964-68) long, T120R Bonneville/T120V (1968-73) long,...
+

fkcab29-E12
£0.50 (£0.60 inc VAT)
Tube type cable nipple Length: 1/8"(3mm), Diameter: 1/8"(3mm) Sold each - Suit Carburettor Air and Throttle slide cable ends.
+

fkgrip030-E17
£8.45 (£10.14 inc VAT)
Rubber Handlebar Grips - Amal Cushion Type As used on Triumph T120 1966 and other models For handlebar diameter 7/8" Supplied as a pair, one at 7/8" and...
+

speedo-64-MPH_F14
£69.95 (£83.94 inc VAT)
OEM: 60-7222
Speedometer Veglia Type - T140/TR7 Replacement magnetic Speedometer head Veglia type. Diameter : Aprox 3-1/4" Chrome bezel Suit Triumph T140/TR7 1978 on...
 

cab2270B-E12
£3.45 (£4.14 inc VAT)
OEM: 97-2270, H2270, 97-4479, H4479
Triumph Front Cable Holder / Retainer - OIF Models - Split Type Attaches to your front mudguard, the grommet type fitting clips into a hole in the...
+

fktwist217r-E8
£13.95 (£16.74 inc VAT)
OEM: 60-7014, 66-8540, 16/364
Amal 364 Type Single Pull Twist Grip - 7/8" Bars Throttle assembly/twistgrip suitable for single pull cable. With throttle screw and friction adjuster....
+

fklev003-E14
£15.95 (£19.14 inc VAT)
OEM: 12/556, 12/161, 12/608, 66-8896, 60-3567, 60-3991, 60-4521, 60-3246
Air/Choke or Magneto Lever - Right Hand For 7/8" Handlebars - Flat End Right handed chrome plated air/choke lever as used on many British bikes - BSA,...
+

clevis490-E12
£3.95 (£4.74 inc VAT)
Clevis Bend - Quick Release - 1/4" to suit 1/4" (6mm) Clevis Pin with 11/16" (15mm) shaft length Suitable for cable end with a pear nipple, to allow...
+

off-grip002
£9.85 (£11.82 inc VAT)
Renthal Trials Handlebar Grips - Medium Compound Full Diamond - Mid Grey Premium quality grips available in a range of compounds to suit the riders...
+

fkcab607-E12
£2.95 (£3.54 inc VAT)
OEM: 99-0241, 16/011
Cable Stop Large slotted cable stop, standard Doherty and Amal, for twistgrip Fits into the Twistgrip to retain the end of the throttle cable. Diameters:...
+

smithrep080-G15
£49.95 (£59.94 inc VAT)
Smiths Chronometric Speedometer Replica - Zero to 80 MPH Dial 2:1 Drive Dimensions: Main Body Width: 80mm Bezel Width: 88mm Depth: 88mm (from top...
+

doherty-grip039-E17
£7.45 (£8.94 inc VAT)
OEM: 60-7470, 60-7471
Rubber Handlebar Grips - Pair Doherty type grips. Made in Europe. As fitted to Triumph T140/TR7 etc Length = 4+3/4" ID = 1" for throttle and 7/8" for...
+

cable445
£8.95 (£10.74 inc VAT)
OEM: 67-8610
Front Brake Cable To suit BSA - B31, B32, B33, B34, M20, M21, M33 (1949-55) with 8'' brake, BSA A10 Standard (1955-57) with 8'' brake Outer Cable: 34"...
+

fkcab13-E12
£0.40 (£0.48 inc VAT)
Cable End Ferrule No.3 Suitable for outer casing ends. Priced singly.
+

fkcab11-E12
£0.40 (£0.48 inc VAT)
Cable End Ferrule No.1 Suitable for outer casing ends. Priced singly.
+

cab8245-E12
£0.75 (£0.90 inc VAT)
OEM: 82-8245, F8245
Triumph Starlock Washer for Front Cable Holder / Retainer - OIF Models 5/16" starlock washer used to fix cable retainer that clips into a hole in the...
+

fktwist219-E8
£13.95 (£16.74 inc VAT)
Standard Universal Twist Grip - Single Pull - 7/8" Bars Throttle assembly/twistgrip with metal tube suitable for 7/8" (22mm) handlebars. Metal tube...
+

lev023-E14
£31.95 (£38.34 inc VAT)
Pair of 7/8" Plain Blade Levers Without Cable Adjusters. (1-1/16" pivot centres) Premium quality chrome plate & fixing screws. For 7/8" (22mm)...
+

cable760
£8.95 (£10.74 inc VAT)
OEM: 60-1993, 60-3079, 60-0667
Triumph Clutch Cable Suitable for following: Triumph - TR6S/S/T120 (1968) with adjuster, TR6/T120 (1969 on), TR6C/TR6R/T120R/T120V (1971-73). Outer...
+

fkcab18-E12
£0.80 (£0.96 inc VAT)
Ball type cable nipple Diameter: 1/4"(6mm) Sold Singly. - Suit some exhaust lifter levers.
+

fkcable041
£6.95 (£8.34 inc VAT)
Air Cable Universal - 376 Amal Monobloc For Amal 376 Monobloc carburettors. Outer Length: 33" Inner Length: 38" 1/4" Drum type nipple
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.