.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Carburation/Fuel

rubb087-E9
£3.95 (£4.74 inc VAT)
OEM: 68-8018
Rear fuel tank mounting rubber for classic BSA A50 and A65 Pre oil in frame (OIF) models. (1962-70). OEM: 68-8018
+

Amal928/062
£3.95 (£4.74 inc VAT)
OEM: 928/062
Amal 928/062 Choke air Valve Amal 928/062 Choke air Valve for 900 Carburettors OEM: 928/062
+

hose782-F8
£3.95 (£4.74 inc VAT)
OEM: 83-5161, 83-2625
BSA A65T (1971-72) and Triumph TR6/TR7 (1971-79) carburettor filter hose. Connects from the carb to the air filter OEM: 83-5161, 83-2625
+

pipe3335
£3.95 (£4.74 inc VAT)
Petrol Fuel Pipe 90 degrees - 82-3335 5/16" diameter pipe 90 degree bend Nickel plated steel pipe, or nickel plated Brass, depending on stock available.
+

amal338
£3.95 (£4.74 inc VAT)
OEM: 376/410, 3/410
Double, push-on, 55 degree, push-on, 5/16'' tubing. For 6 and 9 Series carburettors, and 376/389 Monobloc carbs OEM: 376/410, 3/410
+

rubb123-E9
£3.95 (£4.74 inc VAT)
OEM: 01-4997
AJS Matchless Petrol/Fuel Tank Mounting Bolt - 1949 to 1961 1"  long, 1/4" diameter Sold singly OEM: 01-4997
+

amal-rkc/shim
£3.95 (£4.74 inc VAT)
OEM: RKC/SHIM
Amal Monobloc Float Level Shim Kit - 375, 376, 389 Carburettors Pack of 4 shims to allow the setting of the float level on Amal Monobloc carburettors....
+

amal514
£3.95 (£4.74 inc VAT)
OEM: RKC/514, 376/068, 376/069
Amal Monobloc 375, 376, 389 Carburettor Throttle Adjusting Screw Kit Throttle adjusting screw and spring - idle adjustment As fitted to Amal Monobloc...
+

nut1932
£3.95 (£4.74 inc VAT)
OEM: 21-1932, S1932
Triumph Inlet Manifold  Lock Nut - T120R, TR6R, TR6C - 1969-72 ID: 1+5/6" (33.4mm) OD: 1+1/2" (38.4mm) Zinc Plated Steel Made in England Note: Some...
+

nut4608
£3.95 (£4.74 inc VAT)
OEM: 70-4608, E4608
Triumph - Inlet Manifold Locking Nut - 650cc models from 1963-68 Made in England using the original Triumph tooling. OEM: 70-4608, E4608
+

filt1860-F-F9
£3.95 (£4.74 inc VAT)
OEM: 71-1860, E11860
Flanged Air Filter Adapter Ring 900 Series Carburettors Threaded screw on adapter ring. Screws to the back of the carburettor to fit the air filter....
+

filt289/110-F9
£3.95 (£4.74 inc VAT)
OEM: 289/110
Flanged Air Filter Adapter Ring 375, 29 and 289 Carburettors Threaded screw on adapter ring. Screws to the back of the carburettor to fit the air...
+

filt5194-F9
£3.95 (£4.74 inc VAT)
OEM: 70-5194, 29/110
Air Filter Adapter Ring 375, 29 and 289 Carburettors Threaded screw on adapter ring - non-flanged type. Screws to the back of the carburettor to fit the...
+

tank4140-E9
£3.95 (£4.74 inc VAT)
OEM: 36-4140
BSA Fuel Tank Rear Bolt Support Rubber - B and M Group Rigid and Plunger Frame Models Circa 1945-57 Upper petrol tank support bolt rubber pad - correct...
+

tank8058-E9
£3.95 (£4.74 inc VAT)
OEM: 42-8058
BSA Fuel Tank Stiffening Plate - A and B Group Swinging Arm Models Circa 1954-59 Locates below the petrol tank - c orrect fitment on swinging arm B31,...
+

amal-29/047
£3.95 (£4.74 inc VAT)
OEM: 29/047
Amal 289 Pre Monobloc Throttle Valve/Slide Spring - 29/047 Pre monobloc 29/289 series throttle valve spring. Length: 2+1/2" (63.7mm) OD: 5/16" (8.4mm)...
+

amal-622/197-406
£3.95 (£4.74 inc VAT)
OEM: 622/197, 6/197
Amal Float Needle - 376/389 Monobloc and 600/900 Concentric Genuine Amal float needle for Concentric and Monobloc carburettors. Viton tip for 6 and 9...
 

screw7178-E9
£3.95 (£4.74 inc VAT)
OEM: 24-7178
BSA Tank Knee Grip / Number Plate Mounting Screw + Gearbox Inspection Cover on Pre-Unit Models Used extensively on pre-unit and unit BSA models. Fuel...
+

amal76-276
£3.99 (£4.79 inc VAT)
Amal 76 & 276 Carburettor Gasket Set Gaskets and washers for either an Amal 76 or Amal 276 carburettor
+

amal29-289
£3.99 (£4.79 inc VAT)
Amal 29 & 289 Carburettor Gasket Set Gaskets and washers for either an Amal 29 or Amal 289 carburettor
+

fkamalmainjet
£4.45 (£5.34 inc VAT)
OEM: 376/100
Amal Monobloc and Concentric Main Jet All genuine AMAL jets are calibrated to a flow rate. The number e.g. 100 indicates that it will flow 100cc`s of fuel...

tappart119-F3
£4.45 (£5.34 inc VAT)
Fuel Tap Adaptor 1/4 "- 3/8" Converts your tap thread from 1/4"(1/2"o.d.) to 3/8" (5/8"o.d).
+

hose087-F8
£4.45 (£5.34 inc VAT)
OEM: 06-2537
Norton Commando 750,850cc (1969-74) carburettor filter hose. Connects from the carb to the air filter OEM: 06-2537
+

amal707
£4.45 (£5.34 inc VAT)
OEM: 376/419,3/419
Double Banjo, 180 degree, push-on, 1/4" tubing. For 600 and 900 Series Amal Mark 1 carburettors and Amal 376, 389 Monobloc carbs. OEM: 376/419,3/419
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.