.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Carburation/Fuel

amal376/073
£5.45 (£6.54 inc VAT)
OEM: 376/073
Amal Monobloc Main Jet Holder For 375, 376 and 389 Carburettors Suitable for  375, 376, 389 and 689 series carbs. OEM: 376/073
+

tappart023-F3
£2.95 (£3.54 inc VAT)
Fuel Tap Gas Nut and Spigot - 7/16" Thread Fuel line to tap spigot and nut with 7/16" BSP thread. Suitable for fuel pipe with a 1/4" internal diameter -...
+

amal376/075
£6.95 (£8.34 inc VAT)
OEM: 376/075
Amal Monobloc Main Jet Cover Nut For 375, 376 and 389 Carburettors Suitable for  375, 376, 389 and 689 series carbs. OEM: 376/075
+

Amal276ER-1DB
£402.95 (£483.54 inc VAT)
OEM: 276ER/1DB
Amal 276ER/1DB Pre-Monobloc 1+1/16inch Carburettor - BSA A10 650cc Twin, and other models Suitable for BSA A10 650cc Twin circa 1950-1953 1+1/16" Bore 170...
+

Amal276EU-1DB
£402.95 (£483.54 inc VAT)
OEM: 276EU/1DB
Amal 276EU/1DB Pre-Monobloc 15/16inch Carburettor - BSA A7 500cc Twin, and other models Suitable for BSA A7 500cc Twin circa 1951-1953 15/16" Bore 140...
+

tap119
£10.45 (£12.54 inc VAT)
18mm Fuel Tap With Float Bowl - On-Off-Reserve - RH Outlet Honda type fuel tap with right hand 6mm right hand spigot outlet. Metric 1.0mm pitch thread....
+

Amal276CY-1A
£402.95 (£483.54 inc VAT)
OEM: 276CY/1A
Amal 276CY/1A Pre-Monobloc 15/16inch Carburettor - BSA A7, 500cc, and other models Suitable for BSA A7, 500cc 15/16" Bore 140 Main Jet 107 Needle Jet 3...
+

off-aflt9100
£5.95 (£7.14 inc VAT)
Air Filter Foam Sheet - Double Layer - 10mm Thick - Universal Use Double layer bonded medium coarse foam sheet that can be cut to size as required. The...
+

wash3814-E9
£0.95 (£1.14 inc VAT)
OEM: 82-3814, F3814
Triumph Fuel Tank Mounting Cupped Washer - Pre Unit and Unit Models Circa 1963-82 Rubber washer support cup as used to mount the fuel tank on many pre...
+

amal-rkc/603
£43.95 (£52.74 inc VAT)
OEM: RKC/603
Amal T Bar Fast Idle Throttle Stop Screw - Pre Monobloc Carburettors Easy starter T bar throttle stop screw as used on some Norton and Velocette models....
+

tap729-F3
£7.95 (£9.54 inc VAT)
OEM: 60-7267
1/4" x 1/4" BAP Type Fuel Tap with Filter - RESERVE OEM: 60-7267 BAP type fuel tap as used on Triumph T140 and Norton Commando models, will also...
+

fktank060m-E7
£7.95 (£9.54 inc VAT)
AJS mounting plates - Knee pads heavyweight - Pair
+

bell905-F9
£5.95 (£7.14 inc VAT)
OEM: 6/038
Bellmouth - Short alloy bellmouth to service Amal 276 carburettors. Thread diameter: 1+1/4" OEM: 276, 6/038 Available as genuine Amal or pattern part -...

hose7835-F8
£7.95 (£9.54 inc VAT)
OEM: 40-7835
BSA Air Filter Connector Hose - C15 and B40 Models Circa 1959-64 Carburettor to air filter rubber hose connector. To fit B40 standard models (not SS90...
+

fktappart105-F3
£0.95 (£1.14 inc VAT)
Motorcycle Fuel Tap Cork Diameter: 9/16" Length: 1/4" For slide type Motorcycle fuel taps Price is for ONE cork Normally you would require 2 corks per tap.
+

hose4585-F8
£6.95 (£8.34 inc VAT)
OEM: 42-4585
BSA Air Filter Intake Hose - A7 and A10 Swinging Arm Models Circa 1954-58 Carburettor to air filter rubber hose connector. Length: 7/8" (21.5mm) Filter...
+

hose4216-F8
£6.95 (£8.34 inc VAT)
OEM: 70-4216, E4216
Triumph Air Filter Intake Hose - T100A Models With Amal 376 Carburettor Circa 1961-63 Carburettor to air filter rubber hose connector. Length: 1+15/16"...
+

hose3483-F8
£10.95 (£13.14 inc VAT)
OEM: 60-3483
Triumph/BSA Air Filter Intake Hose - TR5MX Avenger and B50MX Victor Motocross Models Carburettor to air filter rubber hose connector. Filter end - OD:...
+

filt5262-F8
£149.95 (£179.94 inc VAT)
OEM: 70-5262, E5262
Triumph Dual Air Filter Assembly - T120 Unit Models Circa 1963-66 Complete assembly including gloss black body, filter element and clip. As fitted to...
+

hose2624-F8
£7.95 (£9.54 inc VAT)
OEM: 83-2624
BSA A65 Right Hand Air Filter Intake Hose - 1971 Onwards Carburettor to air filter rubber hose connector. Carburettor end - OD: 2+3/16" (55mm), ID: 2"...
+

hose2623-F8
£7.95 (£9.54 inc VAT)
OEM: 83-2623
BSA A65 Left Hand Air Filter Intake Hose - 1971 Onwards Carburettor to air filter rubber hose connector. Carburettor end - OD: 2+3/16" (55mm), ID: 2"...
+

fkrub537-E7
£9.95 (£11.94 inc VAT)
OEM: 40-8029, 40-8030
Knee Grip Rubbers BSA C15, B40, A10, A65 Pair Of Black knee grips for C15/B40/A10/A65 (1960-68) OEM: 40-8029, 40-8030
+

Amal276AT-1BE
£441.95 (£530.34 inc VAT)
OEM: Amal 276AT/1BE
Amal 276AT/1BE Pre-Monobloc 1inch Carburettor - Norton 16H 500cc, Big 4 600cc Single, and other models Suitable for Norton 16H 500cc 1946 - 1954, Norton...
+

Amal289Q-1C
£402.95 (£483.54 inc VAT)
OEM: Amal 289Q/1C
Amal 289Q/1C Pre-Monobloc 1+1/8inch Carburettor - Panther 100 600cc and other models Suitable for Panther 100 600cc 1951 - 1953 1+1/8" Bore 220 Main Jet...
+

Amal276AU-1BE
£442.95 (£531.54 inc VAT)
OEM: Amal 276AU/1BE
Amal 276AU/1BE Pre-Monobloc 1+1/16inch Carburettor - Norton 18, ES2 500cc and other models Suitable for Norton 18, ES2, Trials, 500cc 1946 - 1954 1+1/16"...
+

amal376/099
£9.95 (£11.94 inc VAT)
OEM: 376/099
Amal Monobloc 376 Series Mixing Chamber Top - To Fit Two Ferrules Both cable feeds are not threaded. OEM: 376/099
+

amal389/064
£21.25 (£25.50 inc VAT)
OEM: 389/064
Amal Monobloc 389 Series Mixing Chamber Top - To Fit Two Adjusters Choke feed and Slide feed both have tapped thread for standard adjusters. OEM:...
+

filter375-F7
£25.95 (£31.14 inc VAT)
Air Filter - Conical Type for 375/289 Carburettors - Screw On Spin-on conical air filter with billet adaptor, chrome end caps, stainless steel mesh and...
+

filter389-F7
£19.95 (£23.94 inc VAT)
Air Filter - Conical Type for 389 Carburettors - Screw On Spin-on conical air filter with billet adaptor, chrome end caps, stainless steel mesh and...
+

Bonnie-mainjet-pair
£9.55 (£11.46 inc VAT)
Triumph Hinckley Bonneville Main Jet - Pair - 120/130/140 Pair of jets to fit the Hinckley Bonnie, for use when you need to jet up the carbs after fitting...

Amal276-Sloper
£402.95 (£483.54 inc VAT)
OEM: Amal 276
Amal 276 Pre-Monobloc 1+1/16inch Carburettor - BSA Sloper Model 7 and BSA Sloper Model 8, BSA W32, and other models Suitable for BSA Sloper 7 and 8...
+

amal30/318
£50.95 (£61.14 inc VAT)
OEM: 30/318
Amal Plunger Operated Choke Mixing Chamber Top - Type 6, 76 and 276 Pre Monobloc Carburetter top with push rod operated air valve assembly. Genuine...
+

rubb134-E9
£1.95 (£2.34 inc VAT)
OEM: 06-7799, 22082, NM22082
Norton Fuel Tank Bolt Rubber Washer - Various Twins Circa 1959-68 Petrol tank bolt rubber washer as used on Norton 250/350/400cc Twins from 1959-65 plus...
+

tank0260-E9
£1.95 (£2.34 inc VAT)
OEM: 83-0260, 42-8012, 42-8017
Fuel Tank Centre Bolt Mounting Rubber - Triumph OIF + BSA A and B Group + A50 and A65 Models Correct fitment on Triumph and BSA models with a raised...
+

Amal276EY-1AT
£441.95 (£530.34 inc VAT)
OEM: Amal 276EY/1AT
Amal 276EY/1AT Pre-Monobloc 15/16inch Carburettor - Velocette MAC 350cc, and other models Suitable for Velocette MAC 350cc 1951 - 1955 15/16" Bore 130...
+

Amal76AK-1AT
£421.95 (£506.34 inc VAT)
OEM: Amal 76AK/1AT
Amal 76AK/1AT Pre-Monobloc 1inch Carburettor - Norton Dominator 7 500cc, and other models Suitable for Norton Dominator 7 500cc 1949 - 1956 1" Bore 170...
+

hose3985-F8
£6.95 (£8.34 inc VAT)
OEM: 70-3985, E3985
Triumph Air Filter Intake Hose - 3TA, 5TA Models With Amal 375 Carburettor Circa 1959-63 Carburettor to air filter rubber hose connector. Filter end -...
+

hose4596-F8
£8.95 (£10.74 inc VAT)
OEM: 67-4596
BSA Air Filter Intake Hose - A7 Plunger Models Circa 1949-53 Carburettor to air filter rubber hose connector. Carburettor end - OD: 1+7/8" (47mm), ID:...
+

Amal289C-1A
£402.95 (£483.54 inc VAT)
OEM: 289C/1A
Amal 289C/1A Pre-Monobloc 1+1/8inch Carburettor - Panther 100 600cc, and other models Suitable for Panther 100 600cc 1946 - 1950 1+1/8" Bore 220 Main Jet...
+

Amal276GG-1DB
£402.95 (£483.54 inc VAT)
OEM: 276GG/1DB
Amal 276GG/1DB Pre-Monobloc 1+1/16inch Carburettor - BSA A10 Gold Flash 650cc, and other models Suitable for BSA A10 Gold Flash 650cc 1954 - 1958 1+1/16"...
+

Amal276GE-2EK
£402.95 (£483.54 inc VAT)
OEM: 276GE/2EK
Amal 276GE/2EK Pre-Monobloc 1inch Carburettor - Triumph Tiger 100, 500cc, and other models Suitable for Triumph Tiger 100, 500cc circa 1954 1" Bore 150...
+

Amal276AV-1ED
£402.95 (£483.54 inc VAT)
OEM: 276AV/1ED
Amal 276AV/1ED Pre-Monobloc 1+1/16inch Carburettor -Matchless G3 350cc, and other models Suitable for Matchless G3, G3L, G3LS, G3C, G3CS 350cc circa 1954...
+

Amal276FD-1DB
£402.95 (£483.54 inc VAT)
OEM: 276FD/1DB
Amal 276FD/1DB Pre-Monobloc 1inch Carburettor - BSA A7 500cc Twin, and other models Suitable for BSA A7 500cc Twin 1951 - 1953 1" Bore 160 Main Jet 107...
+

Amal276FV-1DJ
£441.95 (£530.34 inc VAT)
OEM: 276FV/1DJ
Amal 276FV/1DJ Pre-Monobloc 1inch Carburettor - Norton Big 4 600cc, and other models Suitable for Norton Big 4 600cc 1953 - 1954 1" Bore 170 Main Jet 106...
+

amal-ally-620-LH
£191.95 (£230.34 inc VAT)
OEM: 620/301
Amal Mk1 Carburettor 600 LH - Premier - Aluminium Will suit Triumph Tiger Cub if jetted correctly. Left hand, 20mm bore, 4 stroke. Carburettor Range...
+

amal-ally-620-RH
£191.95 (£230.34 inc VAT)
OEM: 620/300
Amal Mk1 Carburettor 600 RH - Premier - Aluminium Will suit Triumph Tiger Cub if jetted correctly. Right hand, 20mm bore, 4 stroke. Carburettor Range...
+

fuelfilt-001B-F3
£2.95 (£3.54 inc VAT)
8mm Inline Fuel Filter - Clear Polycarbonate with Micro Mesh - 21mm Diameter A small neat fuel filter with 8mm inlet and outlet. Clear polycarbonate...
+

fkamalconcpilotjet
£3.95 (£4.74 inc VAT)
OEM: 124/026
Amal Concentric Pilot Jet OEM: 124/026 All genuine AMAL jets are calibrated to a flow rate. The number e.g. 100 indicates that it will flow 100cc`s of fuel...

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.