.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Carburation/Fuel

tap098-F3
£35.95 (£43.14 inc VAT)
1/4" x 7/16" Push-on Pull-off Chrome Fuel Tap with Filter, Nut & Spigot A high quality chrome plated two position 'PUSH-ON, PULL-OFF' slide type...
+

amal-332/017
£2.45 (£2.94 inc VAT)
OEM: 332/017
Genuine Amal Pilot Air Adjusting Screw - Monobloc Carburettors - 332/017 Air mixture adjustment screw for all monobloc carbs including 375. 376, 389 etc....
+

cap032m-F2
£52.95 (£63.54 inc VAT)
OEM: 29-7892, 29-7898, 82-0267, F267, 83-3875
2+1/2" Locking Fuel Tank Filler Cap - Chrome Plated with 2 Keys Lockable push turn type 2 1/2" petrol tank cap, supplied with 2 keys. Standard bayonet...
+

off-aflt9100
£5.95 (£7.14 inc VAT)
Air Filter Foam Sheet - Double Layer - 10mm Thick - Universal Use Double layer bonded medium coarse foam sheet that can be cut to size as required. The...
+

rub855-E7
£9.95 (£11.94 inc VAT)
OEM: 82-1605, 82-1606
Knee Grip Rubbers Triumph Pre-Unit and T20 Models Pair of black knee grips suitable for T20 and many other pre unit Triumph models. OEM: 82-1605,...

filt637-F8
£42.95 (£51.54 inc VAT)
OEM: 42-4582
BSA A7, BSA A10 (1954-58) swinging arm Air Filter Assembly complete with element. Air Inlet 4cm diameter. Powder coated in gloss black. OEM: 42-4582
+

fkpipe012
£0.80 (£0.96 inc VAT)
3/16inch (5mm) id, 2mm thick, CLEAR. Fuel Line 3/16" (5mm) CLEAR Plain fuel line, sold per 12" (30cm) OD: 5/16" (8.5mm) 2mm thick, clear plain PVC
+

amal76-276
£3.99 (£4.79 inc VAT)
Amal 76 & 276 Carburettor Gasket Set Gaskets and washers for either an Amal 76 or Amal 276 carburettor
+

o-clip-13mm-F3
£0.40 (£0.48 inc VAT)
Fuel Pipe O Clips - Double Ear - 11-13mm Fuel Pipe Clip 11-13mm Suit pipe of 1/4" Bore
+

badge744p
£45.95 (£55.14 inc VAT)
OEM: 82-9700, 82-9701
Pair of Die cast Chrome plated tank badges for Triumph UK and USA spec Triumph Bonneville T120/TR6 tanks (1967-70) and USA spec T140 models. Die Cast And...
+

tank8049-E9
£5.45 (£6.54 inc VAT)
OEM: 42-8051, 42-8049
BSA Fuel Tank Support Foam Pad - A50, A65, Unit Singles + A and B Group Models From 1954 Onwards Correct fitment on the following models + universal use...
+

bell905-F9
£5.95 (£7.14 inc VAT)
OEM: 6/038
Bellmouth - Short alloy bellmouth to service Amal 276 carburettors. Thread diameter: 1+1/4" OEM: 276, 6/038 Available as genuine Amal or pattern part -...

cap039-F2
£31.95 (£38.34 inc VAT)
OEM: 01-3748, 01-1003, 3667
Fuel Tank Cap AJS, Matchless expanding finger type. (1931-48) Chromed. OEM:  01-3748, 01-1003, 3667
+

cap034-F2
£32.95 (£39.54 inc VAT)
Fuel Tank Cap 2+1/2" 2+1/2" Alloy Monza flip-up type Polished Alloy. Base has threads for screwing onto tank.
+

inlet3940
£55.95 (£67.14 inc VAT)
OEM: 70-3940, E3940, 70-3847, E3847
Triumph Inlet Manifold - Delta Head Pre Unit and Early Unit T120 Models - Circa 1959-63 Left or right hand side inlet manifold for pre unit and early...
+

tank8107
£204.95 (£245.94 inc VAT)
OEM: 42-8107
BSA Fuel / Petrol Tank - 4 Gallon - DB32, DB34 and A10 Rocket Gold Star Models Circa 1956-62 Chrome plated tank with round badge indents, breather hole...
+

fuel-spigot-716-F3
£3.45 (£4.14 inc VAT)
Fuel Tap Pipe Spigot for 7/16" Thread - Brass Fuel pipe spigot for 7/16" gas thread nut, or 7/16" BSP Suit 1/4" fuel pipe.
+

tanksc/nut8317-E9
£0.45 (£0.54 inc VAT)
OEM: 65-8317, 42-8034
BSA Tank Badge Mounting Screw and Nut - Various Singles and Twins Countersunk screw and nut used to secure fuel/oil tank badges on various models...
+

t/kit0087-E9
£15.95 £13.95 (£16.74 inc VAT)
OEM: 82-1808, 82-3814, 82-3815, 82-0966, 82-0967, 82-1813
Triumph Complete Fuel Tank Mounting Kit - Pre-Unit 500/650cc from 1950 Onwards Suitable for Triumph Pre Unit 500/650cc models from 1950-59 such as 5T,...
+

rubb198H-E9
£2.50 (£3.00 inc VAT)
Concave anti-roll tank rubber for the classic Triumph T140 Oil In Frame (OIF) Models. OEM: 83-4931
+

cap025-F2
£8.95 (£10.74 inc VAT)
OEM: 83-3875, 82-3220, 29-7898, 15941, 01-3325
Fuel Tank Cap 2+1/2" Domed - Chrome Chrome plated and vented OEM: 83-3875, 82-3220, 29-7898, 15941, 01-3325 Replacement gasket available
+

tank3967
£30.95 (£37.14 inc VAT)
OEM: 82-3967, F3967
Triumph Fuel Tank Styling Strip - Pre Unit 500/650cc Models Circa 1955-59 Correct fitment on pre unit 5T, TR5, T100, 6T, T110, TR6 and T120 models with a...
+

badge744-E9
£42.95 (£51.54 inc VAT)
OEM: 82-9700, 82-9701
Pair of Die cast Chrome plated tank badges for Triumph T100/T120/T140/T150/TR6/TR7 models. (1967-70). Ready To Fit with mounting bolts. Right and Left...
+

tanksc816-E9
£0.95 (£1.14 inc VAT)
OEM: 83-1339
Tank Badge Screw - Triumph Triumph Tank Badge Screw for T100, T120, T140, T150 models. Chrome plated. Also fits side panel / name plate Long type...

filt618-F8
£62.95 (£75.54 inc VAT)
Air Filter - BSA A75 and Triumph T150, T160 BSA A75 and Triumph T150, T160 3 cylinder models (1969 on) To fit Triumph Trident Air Filter Assembly...
+

amal525
£32.95 (£39.54 inc VAT)
OEM: RKC/525, 4/230, 14/304P, 14/024
Amal Pre Monobloc Float Chamber Kit - Bottom Feed Contains: Needle Clip, Float and Float Chamber Needle OEM: RKC/525, 4/230, 14/304P, 14/024 All...
+

rubb087-E9
£3.95 (£4.74 inc VAT)
OEM: 68-8018
Rear fuel tank mounting rubber for classic BSA A50 and A65 Pre oil in frame (OIF) models. (1962-70). OEM: 68-8018
+

bell339-F9
£62.95 (£75.54 inc VAT)
OEM: 30/339
Amal Pre-Monobloc Zinc Alloy Intake Assembly Bellmouth / Air Strainer - 274, 275 and 276 Originally introduced in 1940 for the then new 276 series...
+

600-2-kit
£41.95 (£50.34 inc VAT)
OEM: RKC/555
Amal 600 Concentric Repair Kit - 2 Stroke Complete repair kit for the Concentric Carb. Includes: StayUp float, needle valve, gaskets, fuel filter, needle...

amal376/095
£2.95 (£3.54 inc VAT)
OEM: 376/095, 99-0440
Amal Monobloc Pilot Jet Cover Nut - OEM: 376/095, 99-0440
+

filt625-F7
£16.95 (£20.34 inc VAT)
OEM: 06-0673
Air Filter Element - Norton Commando 1969-74 Replacement Element Approx 8" x 3" OEM: 06-0673
+

amal516
£2.99 (£3.59 inc VAT)
OEM: 376/079
Amal Carburettor Monobloc Float Chamber Cover Screw Set For 376/389 Monobloc carbs The 3 screws that hold the side cover on the float chamber, for...
+

amal928-060
£27.95 (£33.54 inc VAT)
OEM: 928/0603, 928/06035, 928/0604
Amal 900 Mk1 Concentric Carburettor Throttle Slide/Valve Throttle Slide/Valve No. 3 or No. 3.5 Cutaway Zinc Please select size OEM: 928/0603,...

fkfilt623-F7
£6.95 (£8.34 inc VAT)
Tapered Air Filter - Universal Conical 48mm With Chrome end cap, includes Jubilee clip. Fits Amal 389/900 carburettors Also suitable for: Honda:...
+

pipe3335
£3.95 (£4.74 inc VAT)
Petrol Fuel Pipe 90 degrees - 82-3335 5/16" diameter pipe 90 degree bend Nickel plated steel pipe, or nickel plated Brass, depending on stock available.
+

badge745-E9
£19.95 (£23.94 inc VAT)
OEM: 83-5361, 60-7210
Pair of Triumph Metal tank badges, logo 6". Chrome plated. Fits Triumph T140/T160 (1978 on) OEM: 83-5361, 60-7210
+

fuelfilt-001B-F3
£2.95 (£3.54 inc VAT)
8mm Inline Fuel Filter - Clear Polycarbonate with Micro Mesh - 21mm Diameter A small neat fuel filter with 8mm inlet and outlet. Clear polycarbonate...
+

rubb123-E9
£3.95 (£4.74 inc VAT)
OEM: 01-4997
AJS Matchless Petrol/Fuel Tank Mounting Bolt - 1949 to 1961 1"  long, 1/4" diameter Sold singly OEM: 01-4997
+

tap116
£10.45 (£12.54 inc VAT)
16mm Fuel Tap, On-Off-Reserve. Metric 1.0mm thread Right hand outlet Lever for on, off and reserve setting
+

tap094-F3
£39.95 (£47.94 inc VAT)
1/4" Pull-on Push-off Brass Fuel Tap with Ribbed Shank Good quality brass petrol tap with filter - made in England Two Position 'PULL-0N, PUSH-OFF'...
+

clip100-F3
£1.75 (£2.10 inc VAT)
OEM: 83-1615
Breather Hose Clip 'D' Shape (1971-) - 83-1615 As fitted on T120/TR6/T140 Oil in frame models. Bolt hole = 5mm OEM: 83-1615, F11615
+

tank3321-E9
£2.95 (£3.54 inc VAT)
OEM: 83-3321, F13321, 68-8013
Triumph/BSA Rubber Mounting O Ring For Fuel Tank Beading Holder Fuel tank mounting rubber O ring as used on Triumph 650cc OIF models. Also used on BSA...
+

fkamal444
£171.95 (£206.34 inc VAT)
OEM: 624/301
Amal Mk1 Carburettor 600 LH 24mm Left hand, 24mm bore, 4 stroke. Carburettor Range (600/900): 600 Main Jet: 140 Throttle Slide No.: 3 Pilot Jet: Bush...

fkfilt611-F8
£31.95 (£38.34 inc VAT)
OEM: 83-1609
Air Filter - Offset Type for 376/600 Carbs Includes filter element. Chrome outer, offset hole 1+3/4". Approx 125mm outside diameter. Thickness: 1+3/4"...
+

badge7910-E9
£28.95 (£34.74 inc VAT)
OEM: 29-7910, 67-8017
BSA Brass Fuel Tank Badge - Early Rigid & Plunger Models from 1947 Onwards Correct for early C10, C11, B31, B32, B33, B34, A7 from 1947-52 and M20,...
+

badge489-E9
£57.95 (£69.54 inc VAT)
OEM: 82-6887, 82-6888, F6887, F6888
Triumph Fuel Tank Badge - Eyebrow Type - 350/500/650cc Models Circa 1966-68 - Pair Correct fitment on 3TA, 5TA, T90 and T100 models from 1966-68, but may...
+

hose304-F8
£9.95 (£11.94 inc VAT)
OEM: 82-8325
Air hose for Bantam D7/D10 OEM: 82-8325
+

rubb301-E9
£1.95 (£2.34 inc VAT)
OEM: 82-9093, 83-1461, 40-8046, 06-7729, NM19093
Anti-roll rubber for the classic Triumph T140. Also fits BSA and Norton motorcycle models. Also used as seat rubbers. OEM: 82-9093, 83-1461, 40-8046,...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.