.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Carburation/Fuel

fkclip212-F3
£0.99 (£1.19 inc VAT)
Fuel pipe clip 1 inch Fuel Pipe Clip 1" (17-25mm) Suit pipe of 5/8" Bore
+

fkfuel01-F3
£1.00 (£1.20 inc VAT)
Fuel Filter - Nylon Petrol filter, to fit inline, between the petrol tank and the carburettor. Cheap and simple fuel filter. Simply replace them once a year...
+

rubb784-E9
£1.00 (£1.20 inc VAT)
Rubber Fuel tank mounting washers for classic Triumph and BSA 500cc and 650cc models (1964-70). OEM: 82-0967
+

rubb717-E9
£1.00 (£1.20 inc VAT)
Fuel Tank Mounting Rubber for classic Triumph Pre Oil in Frame (OIF) models. OEM: 82-5228, 82-1813
+

amal376/092
£1.05 (£1.26 inc VAT)
OEM: 376/092
Amal Carb Fuel Banjo Bolt Fibre Washer - 375, 376, 389 Monobloc Carburettors Fits 375, 376 and 389 Monobloc Carburettors. OEM: 376/092
+

fkpipe015
£1.10 (£1.32 inc VAT)
Fuel Pipe, Oil Pipe 3/8inch (10mm) Bore, Black rubber petrol hose - Reinforced. Sold per 12". (30cm) OD: 5/8" (16mm) Price is per foot length.
+

rubb812-E9
£1.25 (£1.50 inc VAT)
Fuel Tank Mounting Rubber/Bush - for classic Triumph motorcycles. OEM: 82-9351
+

rubb442H-E9
£1.25 (£1.50 inc VAT)
OEM: 82-5229, 82-4108, 68-8334, 82-3815
Front tank rubber for 500/650 (1964-74) and Triples (1969 on). OEM: 82-5229, 82-4108, 68-8334, 82-3815
+

fkcap060H-F2
£1.25 (£1.50 inc VAT)
OEM: 82-4048, F4048
Fuel Tank Cap 2+1/2" Cork Washer Note: The tank caps as referred to as 2+1/2" caps, the washers are smaller at 2+3/8" OD, to enable fitting inside the...
+

tappart49-91-F3
£1.25 (£1.50 inc VAT)
OEM: A49-91
Fuel Tap Plunger Retaining Screw Overall Length: 5/16" (8mm) UH: 1/4" (6.6mm) - part threaded OEM: A49-91 Please note: Current stock is brass with a...
+

amal151
£1.25 (£1.50 inc VAT)
OEM: 622/151, 6/151, 15-0203, 99-1153
Amal Float Bowl Drain Plug Washer - 600/900 Carburettors OD: 25/32" (19.5mm) ID: 9/15" (13.9mm) OEM:  622/151, 6/151, 15-0203, 99-1153
+

amal-622/086
£1.25 (£1.50 inc VAT)
OEM: 622/086, 99-0521, 19-3093
Genuine Amal Float Bowl and Top Cap Screw and Washer - Concentric Carburettors - 622/086 Secures the mixing bowl float chamber and top caps on MK1...
+

gask199-UK
£1.25 (£1.50 inc VAT)
OEM: 71-3573, NA43A, E4919, 70-4919
Triumph 30mm Carburettor To Manifold Flange Gasket - 650/750cc Models - UK Made Will fit most of the Amal carb flanges, sometimes combined with an...
+

fkpipe088
£1.35 (£1.62 inc VAT)
Fuel Pipe, 6mm Bore, 10mm Diameter - Black Rubber /  Neoprene petrol hose ID: 6mm OD: 10mm Price is per foot length - 12" (30cm) - please add quantity...
+

amal372
£1.45 (£1.74 inc VAT)
OEM: 622/067, 6/067
Amal Needle Clip for 600 and 900 Amal concentric carburettors. OEM: 622/067, 6/067
+

rubb434-E9
£1.45 (£1.74 inc VAT)
Rear Fuel Tank rubber for classic Triumph 500cc and 650cc (1964-69) and classic Triumph Triples (1969-on). OEM: 82-5336
+

amal-adj102
£1.45 (£1.74 inc VAT)
OEM: 5/077, 9/077, 99-7097, 99-0224, 06-7972
Amal Carburettor Cable Adjuster Lock Nut For 600, 900, 276, 376, 389 series Amal carburettors Locks the screw in the top cap to adjust the cable. OEM:...
+

crush-wash351-F3
£1.45 (£1.74 inc VAT)
OEM: 70-7351, E7351
Crush Copper/Rubber Washers for Fuel Tap 1/4" Sealing washer for 1/4" petrol tap - Price for ONE washer. Rubber seal encased in copper, when fitted to fuel...
+

fkpipe090
£1.45 (£1.74 inc VAT)
Fuel Pipe, 8mm Bore, 12mm Diameter - Black Rubber /  Neoprene petrol hose ID: 8mm OD: 12mm Price is per foot length - 12" (30cm) - please add quantity...
+

nut0702-B14
£1.45 (£1.74 inc VAT)
OEM: 14-0702
Triumph Alternator / Carb Manifold Mounting Nut - Unit Twins - 1969 Onwards For mounting the alternator stator on the primary chaincase on 500/650/750cc...
+

amal4/046
£1.45 (£1.74 inc VAT)
OEM: 4/046
Amal Air Valve Return Spring - Pre Monobloc + Monobloc Carburettor Choke spring for use on both pre monobloc and monobloc carbs. Suitable for all 276/289...
+

stud1876-B19
£1.45 (£1.74 inc VAT)
OEM: 21-1876, S1876
Triumph Inlet Manifold to Head Stud - 650/750cc Unit Twins - 1969-82 Correct fitment on T120, TR6, and TR7 models. Overall length: 2" (50.3mm) OD: 1/4"...
+

gask5660
£1.45 (£1.74 inc VAT)
OEM: 70-5660, E5660
Triumph Inlet Manifold Gasket - Unit 650/750cc Single Carb Models - 1967 Onwards Manifold to head joint washer - correct fitment on TR6 models from...
+

gask1418
£1.45 (£1.74 inc VAT)
OEM: 65-1418
BSA 1+5/32" Monobloc Carburettor Flange Joint Washer - Single Carb Models Flange washer suitable for various BSA models fitted with a single monobloc...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.