.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Carburation/Fuel

fkamal449
£191.95 (£230.34 inc VAT)
OEM: 928/300
Amal Mk1 Carburettor 900 RH 28mm Right hand, 28mm bore, 4 stroke. Carburettor Range (600/900): 900 Main Jet: 180 Throttle Slide No.: 3 Pilot Jet: Bush...

fktap086M-F3
£33.95 (£40.74 inc VAT)
3/8" x 7/16" Pull-on Push-off Type Brass Fuel Tap with 90 Degree Exit Good quality brass petrol tap with filter - made in England Two Position Pull-on,...
+

fktappart105-F3
£0.95 (£1.14 inc VAT)
Motorcycle Fuel Tap Cork Diameter: 9/16" Length: 1/4" For slide type Motorcycle fuel taps Price is for ONE cork Normally you would require 2 corks per tap.
+

amalneedjet-conc
£7.15 (£8.58 inc VAT)
OEM: 622/122
Amal Carburetter Needle Jet For CONCENTRIC Carbs All genuine AMAL jets are calibrated to a flow rate. The number e.g. 100 indicates that it will flow...

amal-ferrule-132A
£1.99 (£2.39 inc VAT)
OEM: 6/132
Amal Carburettor Top Hat Cable Ferrule Fits on the top cover, to suit some cables without ferrule ends and without the adjuster screw. For 6 and 9 Series...
+

amal0120-CP
£13.45 (£16.14 inc VAT)
OEM: 67-0120, 67-0527
Carburettor Drip Tray - BSA A7, A10 + Ariel and Norton Models Mounting holes are 2" (51mm) centre to centre. Bore = 1+3/6" (30mm) approx. Mounts between...
 

fkclip016-F3
£2.25 (£2.70 inc VAT)
Fuel Pipe Clip - Worm Drive 11 - 19mm
+

tappart104P-F3
£4.95 (£5.94 inc VAT)
OEM: R27A/CP
Replacement Fuel Tap Plunger - Turn to Lock - Push Off Fuel tap plunger for use on plunger type petrol taps. Simple turn to lock and push off...
 

tank332
£299.95 (£359.94 inc VAT)
OEM: 06-2701
Norton Commando Roadster Fuel Tank. Steel Gas Tank Supplied in raw steel. As fitted to Norton Commando/Commando Roadster 750,850cc models from 1970-1977....
+

fkamal375
£3.45 (£4.14 inc VAT)
OEM: 376/078, 376/092, 14/175, 116/162, 376/074, NA43
Amal 375 Carburettor Gasket Set Gaskets for overhaul of the 375 Monobloc Carb. OEM: 376/078, 376/092, 14/175, 116/162, 376/074, NA43
+

fktap067M-F3
£34.95 (£41.94 inc VAT)
OEM: 90-8120, 90-8027
1/8" BSA Bantam D7, D10, D14 - Fuel Tap with Filter OEM: 90-8120, 90-8027 Two Position Pull-on, Push-off Slide Type Lever Tap Outlet Spigot Diameter:...
+

t/rub173-E9
£2.95 (£3.54 inc VAT)
OEM: 40-8107, 68-8170
BSA Fuel Tank Centre Grommet - Deep Type Fuel tank plug fitted to many BSA models with a central mounting fuel tank. Embossed with the BSA logo. OEM:...
+

fkclip010-F3
£2.45 (£2.94 inc VAT)
Fuel Pipe Clip - Worm Drive 7 - 11mm
+

pipe011C-BD
£1.95 (£2.34 inc VAT)
Braided Fuel / Oil Pipe - 1/4" Bore - Black Nitrile Rubber - Ethanol Proof Suitable for oil, leaded and unleaded fuels. Suitable for pressurized...
+

flamal600mk1.5
£3.95 (£4.74 inc VAT)
Amal 600/900 Mark 1.5 Carburettor Gasket Set
+

amal338
£3.95 (£4.74 inc VAT)
OEM: 376/410, 3/410
Double, push-on, 55 degree, push-on, 5/16'' tubing. For 6 and 9 Series carburettors, and 376/389 Monobloc carbs OEM: 376/410, 3/410
+

amal331
£4.95 (£5.94 inc VAT)
OEM: 376/139, 3/139
Double, push-on, 150 degree, push-on, 5/16'' tubing. For 6 and 9 Series carburettors, and 376/389 Monobloc carbs OEM: 376/139, 3/139

rubb057-E9
£1.95 (£2.34 inc VAT)
OEM: 01-4995
Fuel Tank Mounting Rubber AJS/Matchless (Thick). 5/8" Thick and with a 3/8" hole. OEM: 01-4995
+

fkamal452
£191.95 (£230.34 inc VAT)
OEM: 932/301
Amal Mk1 Carburettor 900 LH 32mm Left hand, 32mm bore, 4 stroke. Carburettor Range (600/900): 900 Main Jet: 220 Throttle Slide No.: 3 Pilot Jet: Bush...

fktap082-F3
£32.95 (£39.54 inc VAT)
1/8" x 7/16" Round Lever Brass Fuel Tap with Filter Good quality brass petrol tap - made in England Two position lever Tap Outlet Thread Diameter:...
+

amal-4/137A
£2.05 (£2.46 inc VAT)
OEM: 4/137A
Genuine Amal Choke Blanking Plug - Monobloc and Concentric Carburettors - 4/137A Screws into the mixing chamber top when a choke is not used. Fits all...
+

amal372
£1.45 (£1.74 inc VAT)
OEM: 622/067, 6/067
Amal Needle Clip for 600 and 900 Amal concentric carburettors. OEM: 622/067, 6/067
+

rubb843-E9
£2.45 (£2.94 inc VAT)
OEM: 83-3068, F13068
Triumph/BSA OIF Models - Fuel Tank Centre Rubber Grommet / Plug - Circa 1971 Correct fitment on Triumph and BSA oil in frame models - T120, TR6, B50, A65....
+

rubb442H-E9
£1.25 (£1.50 inc VAT)
OEM: 82-5229, 82-4108, 68-8334, 82-3815
Front tank rubber for 500/650 (1964-74) and Triples (1969 on). OEM: 82-5229, 82-4108, 68-8334, 82-3815
+

screw658-E9
£2.45 (£2.94 inc VAT)
OEM: 82-2936
Triumph Tank Rack Screws - Chrome Plated or Stainless Steel Mounting screw for tank rack. Price for ONE screw or a pack of 4. Available as chrome...

fkamal504
£241.95 (£290.34 inc VAT)
OEM: 389/3732
Amal 389 Monobloc Carburettor 1+5/32" Comes with: 3 Cutaway Slide 330 Main Jet 106 Needle Jet 25 Pilot Jet If this specification is not correct for your...
+

adap232
£6.95 (£8.34 inc VAT)
OEM: 01-0676
Bakelite manifold spacer. 5/8" Thick and 1" Bore, stud holes 2" apart To fit AJS and Matchless models, and other motorcycles with amal carburettors 5/8"...
+

cap033-F2
£26.95 (£32.34 inc VAT)
Fuel Tank Cap 2" 2" Alloy Monza flip-up type Polished Alloy. Base has threads for screwing onto tank. Thread size: 50mm x 1.5
+

900-long-gauze-F9
£39.50 (£47.40 inc VAT)
Long Bellmouth for Amal 900 Concentric Mk1 Carburettor - with Gauze Bellmouth, Air Ram, Velocity stack - for 900 series Amal Mark 1 carburettors. Screw on...
+

rubb906-E9
£3.95 (£4.74 inc VAT)
OEM: 83-4932
Fuel Tank mounting rubber for BSA A65 Oil in frame (1971-73) and all Oil in frame Triumph Twins T120/T140 etc (1971-85). OEM: 83-4932, 83-3021, F13021, F14932
+

bell928/076-F9
£22.95 (£27.54 inc VAT)
OEM: 928/076
Alloy Bellmouth for Amal 900 Concentric Carburettor Alloy velocity stack for optimum air flow, for use with MK1 Amal carbs. Supplied with three grub...

tap080-F3
£32.95 (£39.54 inc VAT)
1/4" x 1/4" Round Lever Brass Fuel Tap without Filter Good quality brass petrol tap - made in England Two position lever Lever has slight taper Tap...
+

amal622/124
£9.45 (£11.34 inc VAT)
OEM: 622/124, 99-1036, 19-3137
Amal 600/900 Series Carburettor 4 Stroke Throttle Needle With 2 'V' Grooves Throttle needle with two inscribed rings and 3 adjusting slots as used on 4...
 

fkpipe019
£0.95 (£1.14 inc VAT)
Fuel Pipe 3/16inch (5mm) Bore, Black rubber petrol hose - Reinforced. Sold per 12". (30cm) OD: 7/16" (11.5mm) Price is per foot length.
+

adap26-28-30-32
£16.95 (£20.34 inc VAT)
Amal Carburettor Manifold Flange Spacer - 5mm Thick - stud holes 2" apart To fit amal carburettors. Phenolic Spacer 3/16" (5mm) thick Various hole sizes...

bell-376/066
£19.95 (£23.94 inc VAT)
OEM: 376/066
Amal Bellmouth / Air Intake Tube - 376 Monobloc and 600 MKI Concentric Carbs Threaded air intake tube suitable for Amal 376 monobloc and 600 series MKI...
+

badge257-E9
£37.95 (£45.54 inc VAT)
OEM: 65-8228
BSA Gold Star 4" Tank Badges - Pair - Red and Gold For a few quid, you can make sure the bike looks great! This is one of the shiny bits that people...
+

inlet639-pair
£26.95 (£32.34 inc VAT)
Webco Style Single to Twin Carb Conversion Inlet Manifolds - Triumph Pre Unit and Unit 650cc Models Convert from single to twin carb using this pair of...
+

375kit
£53.95 (£64.74 inc VAT)
Amal 375 Series Monobloc Carburettor Repair Kit Genuine Amal Carburettor Repair Kit to Overhaul your 375 Monobloc Carb This kit has everything you need...

rubb434-E9
£1.45 (£1.74 inc VAT)
Rear Fuel Tank rubber for classic Triumph 500cc and 650cc (1964-69) and classic Triumph Triples (1969-on). OEM: 82-5336
+

tanksc814-E9
£0.95 (£1.14 inc VAT)
OEM: 82-7888
Tank Badge Screw - Triumph Triumph Tank Badge Screw for T100, T120, T140, T150 models. Chrome plated. Short type : 8mm Price is for ONE screw For...

fuel-clip-band-906
£0.30 (£0.36 inc VAT)
Fuel Pipe Spring Band Clamp - 6mm, 8mm, 10mm, 12mm and 14mm Squeeze the ends to fit onto the fuel line, constant tension is applied to secure the pipe....
 

inlinetap09-F3
£12.45 (£14.94 inc VAT)
Fuel Tap In-Line, On/Off Fits in line with fuel pipe, simple on/off lever Suit 6mm or 1/4" pipe.
+

tank4772
£199.95 (£239.94 inc VAT)
OEM: 83-4772
Triumph Fuel Tank - TR7, T140 Models - 2.8 Imperial Gallon Teardrop style tank - 3.6 US gallon, 2.8 imperial gallon. Suitable for T140 Bonneville and TR7...
+

fkrub542m-E7
£23.95 (£28.74 inc VAT)
OEM: 65-8205, 65-8206
BSA Knee Grip Rubbers With Mounting Plates - A, B, C Group Models up to 1957 Overall length: 8+9/32" (21cm) Overall height: 4+7/8" (12.4cm) Distance...
+

CRK298
£63.95 (£76.74 inc VAT)
OEM: 298
SU Carburettor MC2 - Repair Kit To repair SU carburettors, as fitted to Triumph 6T etc. Rebuild Kit - For MC2 Carburettors Suitable for Ariel...
+

amal-622/153-GA
£7.45 (£8.94 inc VAT)
OEM: 622/153, 622/155
Amal Metal Float Bowl Drain Plug - 600/900 Carburettors Metal Float bowl drain plug, for 6 and 9 Series carburettors Please select option: Standard...
 

cap037-F2
£29.95 (£35.94 inc VAT)
OEM: 66-8351, 01-4034 ,3577, A2/80
Fuel Tank Cap -2+1/2" Winged Nut Hinged 2+1/2" Chrome wing nut cap, hinged. Fits BSA Goldstar, Norton Models (1936-54) and AJS/Matchless competition...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.