.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Carburation/Fuel

stud1883-E9
£1.95 (£2.34 inc VAT)
OEM: 21-1883, S1883
Triumph Front Fuel Tank Mounting Stud - 500/650cc Models From 1968-70 Front fuel tank shouldered stud for unit models - T120, T100 etc. Size: 5/16" UNF...
+

pipe019EP
£1.95 (£2.34 inc VAT)
Ethanol Proof Fuel / Oil Pipe - 3/16" Bore - Reinforced Black Nitrile Rubber SAE J30 R6 grade hosing for ethanol enriched E5 and E10 petrol. Suitable for...
+

pipe011EP
£1.95 (£2.34 inc VAT)
Ethanol Proof Fuel / Oil Pipe - 1/4" Bore - Reinforced Black Nitrile Rubber SAE J30 R6 grade hosing for ethanol enriched E5 and E10 petrol. Suitable for...
+

pipe011C-BD
£1.95 (£2.34 inc VAT)
Braided Fuel / Oil Pipe - 1/4" Bore - Black Nitrile Rubber - Ethanol Proof Suitable for oil, leaded and unleaded fuels. Suitable for pressurized...
+

tank0260-E9
£1.95 (£2.34 inc VAT)
OEM: 83-0260, 42-8012, 42-8017
Fuel Tank Centre Bolt Mounting Rubber - Triumph OIF + BSA A and B Group + A50 and A65 Models Correct fitment on Triumph and BSA models with a raised...
+

rubb134-E9
£1.95 (£2.34 inc VAT)
OEM: 06-7799, 22082, NM22082
Norton Fuel Tank Bolt Rubber Washer - Various Twins Circa 1959-68 Petrol tank bolt rubber washer as used on Norton 250/350/400cc Twins from 1959-65 plus...
+

amal622/071
£1.95 (£2.34 inc VAT)
OEM: 622/071, 6/071, 19-3116
Amal Float Spindle - MK1 600/900 Series Concentric Carburettors Float axle / pivot pin as fitted to all 600 and 900 concentric carbs. Length: 1+3/8"...
+

tank8032-E9
£1.95 (£2.34 inc VAT)
OEM: 65-8032
BSA Fuel Tank Rear Mounting Rubber Pad - B, C and M Group Models Circa 1945-62 + Universal Use Upper petrol tank support bolt rubber pad - correct fitment...
+

rubb407-E9
£1.95 (£2.34 inc VAT)
OEM: 83-4934, F14934
Triumph Fuel Tank Centre Mounting Rubber - 750cc Twins From 1973 Onwards Correct fitment on OIF 750cc models - T140, TR7, TSX, TSS and Harris Bonneville...
+

adap2968-26-thin
£1.95 (£2.34 inc VAT)
OEM: 70-2968, E2968
Amal Carburettor Manifold Insulating Block - 26mm - Thin Type Rigid phenolic carburettor insulating spacer  as used on Triumph models plus other marques...
+

amal14/021V
£1.95 (£2.34 inc VAT)
OEM: 14/021V
Amal Pre-Monobloc Top Feed Float Chamber Cover / Cap Locking Screw - Reduced Head Suitable for top feed float chambers as used on 76, 276 and 289...
+

amal398
£1.99 (£2.39 inc VAT)
OEM: 622/131, 6/131
Amal Throttle Slide Spring - 600/900 Concentric Throttle Slide Spring for Concentric carbs OEM: 622/131, 6/131
+

Amal622/129
£1.99 (£2.39 inc VAT)
OEM: 622/129, 6/129, 99-1038
Amal Carb Choke air Valve Spring Choke/Air valve return spring for 6 and 9 Series carburettors. Triumph number is 99-1038. OEM: 622/129, 6/129, 99-1038
+

tankrub-764
£1.99
OEM: 22764, NM22764
Norton Fuel Tank Rear Mounting Rubber Ring - 22764 Used to secure the petrol tank to the frame. Used on the Norton Dominator 88, 99. May fit other...
+

amal-4/137A
£2.05 (£2.46 inc VAT)
OEM: 4/137A
Genuine Amal Choke Blanking Plug - Monobloc and Concentric Carburettors - 4/137A Screws into the mixing chamber top when a choke is not used. Fits all...
+

amal-ferrule-132A
£2.15 (£2.58 inc VAT)
OEM: 6/132
Amal Carburettor Top Hat Cable Ferrule Fits on the top cover, to suit some cables without ferrule ends and without the adjuster screw. For 6 and 9 Series...
+

fkclip016-F3
£2.25 (£2.70 inc VAT)
Fuel Pipe Clip - Worm Drive 11 - 19mm
+

rub058-B-E9
£2.25 (£2.70 inc VAT)
OEM: 42-8052
BSA Motorcycles A & B Group, Fuel Tank anti-roll Rubber. Sold in singles. OEM: 42-8052
+

adap2968-30
£2.25 (£2.70 inc VAT)
OEM: 70-2968, E2968, 70-4918, E4918
Triumph - Amal Carburettor Manifold Insulating Spacer - 1+3/16" (30mm) Rigid phenolic carburettor insulating block suitable for Triumph and other...
+

fkclip010-F3
£2.45 (£2.94 inc VAT)
Fuel Pipe Clip - Worm Drive 7 - 11mm
+

amal216
£2.45 (£2.94 inc VAT)
OEM: 376/093, 3/093, 99-0438
Nylon filter gauze for 600 and 900 Series Amal Concentric carburettors, and 376/389 Amal Monobloc carbs. OEM: 376/093, 3/093, 99-0438
+

rubb236-E9
£2.45 (£2.94 inc VAT)
OEM: 66-8091
BSA Rear Fuel Tank Mounting Rubbers M20, M21, M33 models etc. OEM: 66-8091
+

amal-332/017
£2.45 (£2.94 inc VAT)
OEM: 332/017
Genuine Amal Pilot Air Adjusting Screw - Monobloc Carburettors - 332/017 Air mixture adjustment screw for all monobloc carbs including 375. 376, 389 etc....
+

amal4/148
£2.45 (£2.94 inc VAT)
OEM: 4/148
Amal Air Screw Spring - Monobloc Air Screw Spring for 376/389 Monobloc carbs. OEM: 4/148
+

amal599
£2.45 (£2.94 inc VAT)
OEM: 2928/146
Amal Adaptor Clip - MK2 - 2900 Adaptor Clip For 2900 Amal carburettor Clamps the Rubber inlet manifold to the Carburetter and the engine manifold....
+

screw658-E9
£2.45 (£2.94 inc VAT)
OEM: 82-2936
Triumph Tank Rack Screws - Chrome Plated or Stainless Steel Mounting screw for tank rack. Price for ONE screw or a pack of 4. Available as chrome...

stub4791
£2.45 (£2.94 inc VAT)
OEM: 70-4791, E4791
Triumph - Inlet Manifold Balance Pipe Stub Connector - 650cc models from 1963-68 CEI thread. Polished stainless steel. Made in England using the...
+

rubb843-E9
£2.45 (£2.94 inc VAT)
OEM: 83-3068, F13068
Triumph/BSA OIF Models - Fuel Tank Centre Rubber Grommet / Plug - Circa 1971 Correct fitment on Triumph and BSA oil in frame models - T120, TR6, B50, A65....
+

pipe016EP
£2.45 (£2.94 inc VAT)
Ethanol Proof Fuel / Oil Pipe - 5/16" Bore - Reinforced Black Nitrile Rubber SAE J30 R6 grade hosing for ethanol enriched E5 and E10 petrol. Suitable for...
+

pipe015EP
£2.45 (£2.94 inc VAT)
Ethanol Proof Fuel / Oil Pipe - 3/8" Bore - Reinforced Black Nitrile Rubber SAE J30 R6 grade hosing for ethanol enriched E5 and E10 petrol. Suitable for...
+

amal622/074
£2.45 (£2.94 inc VAT)
OEM: 622/074
Amal Straight Spray Tube - 600/900 MK1 Carburettors Brass straight cut choke spray tube as fitted to MK1 concentric carbs. Genuine Amal OEM: 622/074
+

t/bolt0966-E9
£2.45 (£2.94 inc VAT)
OEM: 82-0966, F966
Triumph Fuel Tank Mounting Bolt - Short Type - Pre Unit 500/650cc Models Circa 1946-56 Correct fitment on 5T, 6T, TR5, T100, T110 and TR6 models circa...
+

amal-4/263
£2.45 (£2.94 inc VAT)
OEM: 4/263
Amal 276 Pre Monobloc Throttle Valve/Slide Spring - Long Type - 4/263 Pre monobloc 276 series throttle valve spring. Length: 2+11/16" (67.6mm) OD: 5/16"...
+

wash7351-F3
£2.45 (£2.94 inc VAT)
OEM: 70-7351, 70-6961, E7351, E6961
Bonded Seals Dowty Washer Suitable for 1/4" BSP Fuel Taps - ID 7/16" - UK Made Fuel tap sealing washer with bonded rubber inner section. Suitable for use...
+

fktappart108-C-F3
£2.45 (£2.94 inc VAT)
Fuel Tap Banjo - BSA Fuel Tap Single banjo with 7/16" hole and 1/4" spigot. Available as Cast or Machined - please select option. OEM: 42-8071
 

tappart605-F3
£2.45 (£2.94 inc VAT)
1/4" Brass Fuel Stop Cap - Fuel Cap 1/4 BSP Brass 1/4 BSP Threaded cap, suitable to screw on end of fuel tap, or fuel tank outlet. 1/4 BSP Thread Diameter:...
+

grom9562-F8
£2.45 (£2.94 inc VAT)
OEM: 82-9562, F9562
Triumph / BSA Air Filter Rubber Grommet - T150, T160 and A75 Models Circa 1968-75 Carburettor to air filter rubber grommet. Locates in the holes on the...
+

rubb198H-E9
£2.50 (£3.00 inc VAT)
Concave anti-roll tank rubber for the classic Triumph T140 Oil In Frame (OIF) Models. OEM: 83-4931
+

amal376/091
£2.65 (£3.18 inc VAT)
OEM: 376/091
Amal Carb Fuel Banjo Retaining Bolt - 375, 376, 389 Monobloc Carburettors Fits 375, 376 and 389 Monobloc Carburettors. Genuine Amal part - made in...
+

wtf-fuelfilt-007
£2.75 (£3.30 inc VAT)
6mm Inline Fuel Filter - Sealed Plastic Body With Brass Mesh Element - 22mm Diameter A small conical shaped fuel filter with 6mm inlet and outlets....
+

amal376/095
£2.95 (£3.54 inc VAT)
OEM: 376/095, 99-0440
Amal Monobloc Pilot Jet Cover Nut - OEM: 376/095, 99-0440
+

t/rub173-E9
£2.95 (£3.54 inc VAT)
OEM: 40-8107, 68-8170
BSA Fuel Tank Centre Grommet - Deep Type Fuel tank plug fitted to many BSA models with a central mounting fuel tank. Embossed with the BSA logo. OEM:...
+

fkwash115-F3
£2.95 (£3.54 inc VAT)
Fibre Washers - 10 x 1/8" Gas Suit 1/8" Gas thread for fuel taps. Hole id 3/8" Supplied as 10 washers
+

fkwash116-F3
£2.95 (£3.54 inc VAT)
Fibre Washers - 10 x 1/4" Gas Suit 1/4" Gas thread for fuel taps. Hole id 1/2" Supplied as 10 washers
+

fkwash117-F3
£2.95 (£3.54 inc VAT)
Fibre Washers - 10 x 3/8" Gas Suit 3/8" Gas thread for fuel taps. Hole id 5/8" Supplied as 10 washers
+

rubb138-E9
£2.95 (£3.54 inc VAT)
OEM: 16237
Norton Motorcycle Fuel Tank Mounting Rubber. Fits the classic Norton Featherbed frame models (1953-69). OEM: 16237
+

rubb657-E9
£2.95 (£3.54 inc VAT)
OEM: 82-1808, F1808
Triumph Fuel Tank Mounting Bolt - Pre Unit and Unit Models Circa 1946-68 Correct fitment on various pre unit and unit models including 5T, 6T,  3TA, 5TA,...
+

tank3321-E9
£2.95 (£3.54 inc VAT)
OEM: 83-3321, F13321, 68-8013
Triumph/BSA Rubber Mounting O Ring For Fuel Tank Beading Holder Fuel tank mounting rubber O ring as used on Triumph 650cc OIF models. Also used on BSA...
+

badge909H-E9
£2.95 (£3.54 inc VAT)
OEM: 83-4776
T riumph T140 Fuel tank badge, also fitted to Hurricane X75 models Clear with Gold lettering to logo. Rubber Grommet to fit also available. Sold as...
+

fktappart101-F3
£2.95 (£3.54 inc VAT)
OEM: 42-8075A
Twin Banjo for Fuel Tap - BSA OEM: 42-8075A Fits BSA A7/A10 Fuel Tap: 42-8075, 65-8171
+

hose125H-F8
£2.95 (£3.54 inc VAT)
OEM: 71-7166
Triumph T140E Carburettor filter hose Fits the T140E. Connects from the carb to the air filter OEM: 71-7166
+

tappart014-F3
£2.95 (£3.54 inc VAT)
Fuel Tap Filter Replacement - Petrol Tap Filter Plastic fine mesh filter, screws onto the fuel tap Filter diameter approx 10mm Thread diameter approx...
+

amal622/078
£2.95 (£3.54 inc VAT)
OEM: 622/078, 99-0517
Amal Carb Fuel Banjo Retaining Bolt - 600 and 900 Concentric Carburettors Fits 600/900 Series and Mark II Concentric Carburettors. OEM: 622/078, 99-0517
+

gask-aub657
£2.95 (£3.54 inc VAT)
OEM: 244/1048, AUB 657
Amal Carburettor Flange O Ring - Earlier Monobloc - Thicker Type Manifold O-ring suitable for 376, 389 and 689 Amal carbs used from 1955 onwards....
+

amal-RKC/613
£2.95 (£3.54 inc VAT)
OEM: RKC/613, 4/035, 9/035, 5/077, 9/077
Genuine Amal Cable Adjuster and Lock Nut - RKC/613 For 600, 900, 276, 376, 389 series Amal carburettors. Screws into the top cap to adjust the cable....
+

fuelfilt-001B-F3
£2.95 (£3.54 inc VAT)
8mm Inline Fuel Filter - Clear Polycarbonate with Micro Mesh - 21mm Diameter A small neat fuel filter with 8mm inlet and outlet. Clear polycarbonate...
+

rubb843L-E9
£2.95 (£3.54 inc VAT)
OEM: 83-3068, F13068
Triumph Fuel Tank Centre Rubber Grommet With Embossed Logo - OIF Models Circa 1971-72 Locates in the chrome beading holder in the middle section of the...
+

tappart023-F3
£2.95 (£3.54 inc VAT)
Fuel Tap Gas Nut and Spigot - 7/16" Thread Fuel line to tap spigot and nut with 7/16" BSP thread. Suitable for fuel pipe with a 1/4" internal diameter -...
+

bolt1451-E9
£2.95 (£3.54 inc VAT)
OEM: 82-1451, F1451
Triumph Fuel Tank Front Support Bolt - Pre Unit Models Circa 1946-59 Petrol tank front support bolt as used on 5T, T100, TR5, 6T, T110, TR6 and T120...
+

tank800B-E9
£2.95 (£3.54 inc VAT)
Norton Featherbed / Triton Wrap Round Frame Type Fuel Tank Mounting Rubber + Universal Use Ribbed rubber petrol tank mounting rubber typically used on...
+

a/filter-530-F7
£2.95 (£3.54 inc VAT)
Royal Enfield Gauze / Fabric Air Filter Element - Early 350/500cc Bullet Models Air filter element that locates within the rectangular air box. OD:...
+

amal376/136
£2.95 (£3.54 inc VAT)
OEM: 376/136
Amal 2 Stroke Choke Spray Tube - 375/376/389 Monobloc Carburettors - Angled Type Brass angled /slash cut choke spray tube suitable for two stroke 375,...
+

tanksc8016-E9
£2.95 (£3.54 inc VAT)
OEM: 40-8016, 40-8125, 68-8090
BSA Pear Shape Tank Badge Mounting Screw - Singles and Twins - Circa 1958-67 Suitable for BSA A50, A65, A7, A10, C15, C25, B25, B40, Bantam models....

tappart406
£2.95 (£3.54 inc VAT)
1/4" Stainless Nipple - Fuel Line 1/4 BSP Equal Joining Nipple Brass 1/4 BSP - Parallel Thread. Threaded nipple with hexagon centre. 1/4 BSP Thread...
+

tappart580
£2.95 (£3.54 inc VAT)
1/4" Brass Nipple - Fuel Line 1/4 BSP Taper Joining Nipple Brass 1/4 BSP - Taper Thread. Threaded nipple with hexagon centre. 1/4 BSP Thread Diameter: 1/2"...
+

tappart586
£2.95 (£3.54 inc VAT)
1/4" Brass Fuel Stop Plug - Fuel Plug 1/4 BSP Brass 1/4 BSP Threaded plug, suitable to screw in to fuel tank in place of fuel tap. 1/4 BSP Thread Diameter:...
+

amal516
£2.99 (£3.59 inc VAT)
OEM: 376/079
Amal Carburettor Monobloc Float Chamber Cover Screw Set For 376/389 Monobloc carbs The 3 screws that hold the side cover on the float chamber, for...
+

amal622/075
£3.15 (£3.78 inc VAT)
OEM: 622/075
Amal 2 Stroke Choke Spray Tube - 600 Series Concentric Carburettors - Angled Type Brass angled /slash cut choke spray tube for two stroke 600 series...
+

stud2813
£3.25 (£3.90 inc VAT)
OEM: 71-2813, E12813
Triumph - Inlet Manifold Stud - 650/750cc Unit Twins - 1972-78 Suitable for 650/750cc Unit Twins from 1972-78 with bolt-on inlet manifolds Overall...
+

amal928/107
£3.30 (£3.96 inc VAT)
OEM: 928/107
Amal Choke Spray Tube - Cut Away Type - 850cc Norton Commando Models Brass choke spray tube with 90° cut out for 850cc Commando models with 9 series...
+

fuel-spigot-716-F3
£3.45 (£4.14 inc VAT)
Fuel Tap Pipe Spigot for 7/16" Thread - Brass Fuel pipe spigot for 7/16" gas thread nut, or 7/16" BSP Suit 1/4" fuel pipe.
+

fkamal375
£3.45 (£4.14 inc VAT)
OEM: 376/078, 376/092, 14/175, 116/162, 376/074, NA43
Amal 375 Carburettor Gasket Set Gaskets for overhaul of the 375 Monobloc Carb. OEM: 376/078, 376/092, 14/175, 116/162, 376/074, NA43
+

amalmk1-gk-std
£3.45 (£4.14 inc VAT)
OEM: 622/208, 622/073, 622/101, 13/163, 622/151, 622/082
Amal Concentric 600/900 Series Mark I Carburetter Gasket Set Gaskets and washers to open and clean or repair any Amal 600 or 900 series MK1 carburettor....
+

fkamal600mk2
£3.45 (£4.14 inc VAT)
Amal 600/900 Mark II Carburettor Gasket Set
+

t/rub174m-E9
£3.45 (£4.14 inc VAT)
OEM: 42-8010, 40-8039, 68-8169
BSA Fuel Tank Centre Grommet or Chaincase Inspection Cover - Shallow Type Fuel tank plug fitted to many BSA models with a steel central mounting fuel...
+

rubb119-E9
£3.45 (£4.14 inc VAT)
OEM: A2-277
Petrol/Fuel Tank Mounting Bolt - Norton Precision machined tank mounting bolt for 16H and ES2 models Sold singly OEM: A2-277
+

Amal622/172
£3.45 (£4.14 inc VAT)
OEM: 622/172
Amal Tickler Pin Conversion Kit Genuine Amal Carburettor Tickler Pin Conversion Kit for Amal concentric Mk1 OEM: 622/172 Made in England
+

pipe3353-F3
£3.45 (£4.14 inc VAT)
Petrol Fuel Pipe 25 degrees - 82-3353 5/16" diameter pipe 25 degree bend Nickel plated steel pipe pipe spigot
+

tapart3334-F3
£3.45 (£4.14 inc VAT)
OEM: 82-3334, F3334
Petrol Fuel Pipe Connector Straight - 82-3334 5/16" diameter pipe No bend Nickel plated Brass OEM: 82-3334, F3334
+

off-adap001-34x34
£3.45 (£4.14 inc VAT)
Carburettor/Intake Manifold Rubber Stub Adaptor - Straight and Stepped To fit classic trials and motocross bikes including Montesa, Bultaco, Ossa +...
+

tank8020-E9
£3.45 (£4.14 inc VAT)
OEM: 42-8020
BSA Round Tank Badge Fitting Clip - A, B, C and M Group + A50, A65 and Bantam Models - 1954 Onwards Used on various models to mount the round type tank...
+

tappart8060-F3
£3.45 (£4.14 inc VAT)
OEM: 67-8060
BSA Fuel Tap Bottom Banjo Domed Nut - Models With 3/8" Single Plunger Petcock Domed acorn nut as used in conjunction with a  42-8075 or 65-8171 push/pull...
+

off-adap001-34x38
£3.45 (£4.14 inc VAT)
Carburettor/Intake Manifold Rubber Stub Adaptor - Straight and Stepped To fit classic trials and motocross bikes including Montesa, Bultaco, Ossa +...
+

off-adap001-39x39
£3.45 (£4.14 inc VAT)
Carburettor/Intake Manifold Rubber Stub Adaptor - Straight and Stepped To fit classic trials and motocross bikes including Montesa, Bultaco, Ossa +...
+

off-adap001-44x44
£3.45 (£4.14 inc VAT)
Carburettor/Intake Manifold Rubber Stub Adaptor - Straight and Stepped To fit classic trials and motocross bikes including Montesa, Bultaco, Ossa +...
+

amal622/227
£3.45 (£4.14 inc VAT)
OEM: 622/277, 60-4573, D4573
Amal Lightweight Throttle Valve/Slide Spring -  600/900 Series Carburettors Lightweight throttle return spring suitable for 600/900 series concentric...
+

fkamalconcpilotjet
£3.95 (£4.74 inc VAT)
OEM: 124/026
Amal Concentric Pilot Jet OEM: 124/026 All genuine AMAL jets are calibrated to a flow rate. The number e.g. 100 indicates that it will flow 100cc`s of fuel...

tappart118-F3
£3.95 (£4.74 inc VAT)
Fuel Tap Adaptor 1/8" - 1/4" Converts your tap thread from 1/8" (3/8"o.d.) to 1/4" (1/2"o.d).
+

fkamal276
£3.95 (£4.74 inc VAT)
OEM: 14/175, 2622/066, 622/500, 6/040, 4/053, 23/110
Amal 276 & 29 Carburettor Gasket Set Gaskets and washers for either an Amal 29/289 or Amal 76/276 pre-Monobloc carburettor OEM: 14/175, 2622/066,...
+

fkamal376
£3.95 (£4.74 inc VAT)
OEM: 376/078, 376/092, 14/175, 376/067, 116/162, 376/074, NA43
Amal 376 Carburettor Gasket Set Gaskets for overhaul of the 376 Monobloc Carb. OEM: 376/078, 376/092, 14/175, 376/067, 116/162, 376/074, NA43
+

fkamal389
£3.95 (£4.74 inc VAT)
OEM: 376/078, 376/092, 14/175, 376/067, 116/162, 376/074, NA43
Amal 389 Carburettor Gasket Set Gaskets for overhaul of the 376 Monobloc Carb. OEM: 376/078, 376/092, 14/175, 376/067, 116/162, 376/074, NA43
+

flamal600mk1.5
£3.95 (£4.74 inc VAT)
Amal 600/900 Mark 1.5 Carburettor Gasket Set
+

amal428
£3.95 (£4.74 inc VAT)
OEM: 928/104, 9/104
Amal Carburettor Throttle needles 4 inscribed rings, needle for Norton 850 and Triumph 250cc Models with Concentric Carburettors OEM: 928/104, 9/104
+

amal236
£3.95 (£4.74 inc VAT)
OEM: 622/086
Float Chamber and Top Screws (set of 4) For AMAL 600 and 900 Carburetters Allen bolts, comes with Allen key. OEM: 622/086
+

rubb906-E9
£3.95 (£4.74 inc VAT)
OEM: 83-4932
Fuel Tank mounting rubber for BSA A65 Oil in frame (1971-73) and all Oil in frame Triumph Twins T120/T140 etc (1971-85). OEM: 83-4932, 83-3021, F13021, F14932
+

rubb086-E9
£3.95 (£4.74 inc VAT)
OEM: 68-8017
Front fuel tank mounting rubber for BSA A50/A65 pre Oil in frame models (1962-70). As used on the Front 4 Gallon petrol tank. OEM: 68-8017
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.