.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Carburation/Fuel

fuel-clip-band-906
£0.30 (£0.36 inc VAT)
Fuel Pipe Spring Band Clamp - 6mm, 8mm, 10mm, 12mm and 14mm Squeeze the ends to fit onto the fuel line, constant tension is applied to secure the pipe....
 

o-clip-13mm-F3
£0.40 (£0.48 inc VAT)
Fuel Pipe O Clips - Double Ear - 11-13mm Fuel Pipe Clip 11-13mm Suit pipe of 1/4" Bore
+

o-clip-15mm-F3
£0.40 (£0.48 inc VAT)
Fuel Pipe O Clips - Double Ear - 13-15mm Fuel Pipe Clip 13-15mm Suit pipe of 3/8" Bore
+

o-clip-12mm-F3
£0.40 (£0.48 inc VAT)
Fuel Pipe O Clips - Double Ear - 10-12mm Fuel Pipe Clip 10-12mm Suit pipe of 1/4" Bore
+

tanksc/nut8317-E9
£0.45 (£0.54 inc VAT)
OEM: 65-8317, 42-8034
BSA Tank Badge Mounting Screw and Nut - Various Singles and Twins Countersunk screw and nut used to secure fuel/oil tank badges on various models...
+

seal9001
£0.45 (£0.54 inc VAT)
OEM: 82-9001, F9001, 68-4635
BSA/Triumph Air Filter to Carburettor O Ring Seal - A50 and A65 Models + Unit Singles Rubber O ring seal - correct fitment on A50, A65, B44, B25, C25...
+

amal-622/082
£0.45 (£0.54 inc VAT)
OEM: 622/082, 99-0520
Amal Idle and Throttle Stop Friction O Ring - Concentric Carburettors - 622/082 Nitrile O ring seal for throttle adjustment screw, as used on all...
+

nut1877-B14
£0.45 (£0.54 inc VAT)
OEM: 21-1877, S1877
1/4" UNF Nut - Triumph Inlet Manifold to Head Nut - 650/750cc Unit Twins Circa 1969-82 + Universal Use Inlet manifold to head stud securing nut on T100,...
+

wash0002-F3
£0.45 (£0.54 inc VAT)
OEM: 83-0002, F10002
Fuel Tap Steel Sealing Washer - 1/4" BSP Petrol Taps Thin flat steel fuel tap washer which locates between the Dowty washer and tap locknut to ensure a...
+

o-clip-18mm-F3
£0.45 (£0.54 inc VAT)
Fuel Pipe Double Ear O Clip - Suitable for 15-18mm Outside Diameter Pipe The double ear design provides extra grip and constant pressure. Smooth edges...
+

fkclip183-F3
£0.65 (£0.78 inc VAT)
Fuel pipe clip 1/2inch - 8-12mm Fuel Pipe Clip 1/2" (8-12mm) Worm Drive Jubilee Clip Type Suit pipe of 1/4" Bore
+

wash0660
£0.65 (£0.78 inc VAT)
OEM: 30-0660, 30-660
BSA - 7/16" Plain Washer - Fuel Tank and Frame + Universal Use Rear fuel bank support bolt washer on rigid and plunger frame C10, C11, B31, B32, B33,...
+

fkclip013-F3
£0.75 (£0.90 inc VAT)
Fuel pipe clip 1/2inch. Fuel Pipe Clip 1/2"
+

fkclip015-F3
£0.75 (£0.90 inc VAT)
Fuel pipe clip 5/8inch. Fuel Pipe Clip 5/8"
+

cap061-std-F2
£0.75 (£0.90 inc VAT)
OEM: 82-4047
Fuel Tank / Oil Tank Cap 2" Cork Washer External diameter - 1+7/8" (47mm) Internal diameter - 1+5/16 (33mm) OEM: 82-4047, F4047, 75-5109 Available as...
 

fkclip185-F3
£0.75 (£0.90 inc VAT)
Fuel pipe clip 5/8inch - 10-16mm Fuel Pipe Clip 5/8" (10-16mm) Worm Drive Jubilee Clip Type Suit pipe of 3/8" or 5/16" Bore
+

tank4317-E9
£0.75 (£0.90 inc VAT)
OEM: 82-4317
Triumph Spire Nut/Retaining Clip for Side Panel Script Simply push on to the badge spigot, please take care, once fitted to the spigot they are almost...
+

pipe8592-F3
£0.75 (£0.90 inc VAT)
OEM: 82-8592
9/16" OD Fuel Pipe / Oil Pipe Ferrule To fit 5/16" or 7/16" bore tubing with an outside diameter of 9/16'' (14.3mm) Ideally crimp on to the fuel or oil...
+

panel7020-E9
£0.75 (£0.90 inc VAT)
OEM: 21-7020, S7020
Triumph T140/TR7 Spire Nut/Retaining Clip for Side Panel Badge Fits behind the side panel badge and is then secured with the countersunk screw - see...
+

tank1931-E9
£0.75 (£0.90 inc VAT)
OEM: 97-1931, H1931
Triumph Fuel Tank + Mirror Mounting Distance Piece - Later T140 Models From 1985 Onwards Hard rubber spacer locates above the tie strap when mounting the...
+

wash071-F3
£0.75 (£0.90 inc VAT)
5/8" ID Bonded Seals Dowty Washer Suitable for 3/8" BSP Fuel Taps Fuel tap sealing washer with bonded rubber inner section. Suitable for use with 3/8"...
+

tanksc4468-E9
£0.75 (£0.90 inc VAT)
OEM: 82-4468, F4468
3BA Countersunk Tank Badge Screw - T20 Models Circa 1959 Onwards + Universal Use As used on Triumph T20 Tiger Cub models with garden gate type badges +...

wash350-F3
£0.75 (£0.90 inc VAT)
Bonded Seals Dowty Washer Suitable for 1/8" BSP Fuel Taps - ID 3/8" Fuel tap sealing washer with bonded rubber inner section. Suitable for use with 1/8"...
+

fkpipe017
£0.80 (£0.96 inc VAT)
3/16inch id, 2.7mm thick, REINFORCED. Fuel Line 3/16"(5mm) CLEAR Plain fuel line, sold per 12" (30cm) 2.7mm thick, reinforced nylon braid PVC OD: 3/8" (9.5mm)
+

fkpipe018
£0.80 (£0.96 inc VAT)
1/4inch id, 2.7mm thick, REINFORCED. Fuel Line 1/4" (6.5mm) REINFORCED Plain fuel line, sold per 12" 2.7mm thick, reinforced nylon braid PVC OD: 7/16"...
+

fkpipe013
£0.80 (£0.96 inc VAT)
1/4 inch (6.5mm) id, 2m thick, CLEAR. Fuel Line 1/4" (6.5mm) CLEAR Plain fuel line, sold per 12" (30cm) OD: 7/16" (11mm) 2mm thick, clear plain PVC Photos...
+

fkpipe012
£0.80 (£0.96 inc VAT)
3/16inch (5mm) id, 2mm thick, CLEAR. Fuel Line 3/16" (5mm) CLEAR Plain fuel line, sold per 12" (30cm) OD: 5/16" (8.5mm) 2mm thick, clear plain PVC
+

fkpipe032
£0.80 (£0.96 inc VAT)
1/8inch (3mm) id, 1mm thick, CLEAR. Fuel Line 3/16" (5mm) CLEAR Plain fuel line, sold per 12" (30cm) 1mm thick, clear plain PVC OD: 3/16" 5mm Suitable for...
+

fkpipe416
£0.90 (£1.08 inc VAT)
Fuel Pipe 1/4inch (6.5mm) Bore, Black rubber petrol hose - Reinforced. Sold per 12". (30cm) OD: 1/2" (13mm) Price is per foot length.
+

fkpipe016
£0.90 (£1.08 inc VAT)
Fuel Pipe, Oil Pipe 5/16inch (8mm) Bore, Black rubber petrol hose - Reinforced. Sold per 12". (30cm) OD: 9/16" (14.5mm) Price is per foot length.
+

fktappart106-F3
£0.95 (£1.14 inc VAT)
Fuel Tap Cork For Pull On Type Fuel Taps - 3/8" Normally you will require one cork per tap. Price is for ONE cork Note: These corks are bigger than you...
+

fktappart105-F3
£0.95 (£1.14 inc VAT)
Motorcycle Fuel Tap Cork Diameter: 9/16" Length: 1/4" For slide type Motorcycle fuel taps Price is for ONE cork Normally you would require 2 corks per tap.
+

fkwash073-F3
£0.95 (£1.14 inc VAT)
OEM: 70-7351, E7351, 70-6961, E6961
Dowty Washers for Fuel Tap 1/4" Rubber inner section Hole id 1/2" Used for fuel petrol tap seal, also tacho drive seal, and other uses across the range of...
+

pipe021m-F3
£0.95 (£1.14 inc VAT)
1/2" OD Fuel Pipe / Oil Pipe Ferrule To fit 1/4'' (6.4mm) bore tubing with an outside diameter of 1/2'' (12.7mm) Ideally crimp on to the fuel or oil pipe...
+

fkpipe019
£0.95 (£1.14 inc VAT)
Fuel Pipe 3/16inch (5mm) Bore, Black rubber petrol hose - Reinforced. Sold per 12". (30cm) OD: 7/16" (11.5mm) Price is per foot length.
+

tanksc814-E9
£0.95 (£1.14 inc VAT)
OEM: 82-7888
Tank Badge Screw - Triumph Triumph Tank Badge Screw for T100, T120, T140, T150 models. Chrome plated. Short type : 8mm Price is for ONE screw For...

tanksc816-E9
£0.95 (£1.14 inc VAT)
OEM: 83-1339
Tank Badge Screw - Triumph Triumph Tank Badge Screw for T100, T120, T140, T150 models. Chrome plated. Also fits side panel / name plate Long type...

gask199-std
£0.95 (£1.14 inc VAT)
OEM: 71-3573, NA43A, E4919, 70-4919
Triumph 30mm Carburettor To Manifold Flange Gasket - 650/750cc Models - Standard Will fit most of the Amal carb flanges, sometimes combined with an...
+

wash3814-E9
£0.95 (£1.14 inc VAT)
OEM: 82-3814, F3814
Triumph Fuel Tank Mounting Cupped Washer - Pre Unit and Unit Models Circa 1963-82 Rubber washer support cup as used to mount the fuel tank on many pre...
+

screw205-B18
£0.95 (£1.14 inc VAT)
OEM: 82-4129, F4129
Contersunk Screw - Rotor Cover or Tank Badge - 82-4129 To screw the rotor cover on the primary chaincase. Can also be used for Tank Badges, but my need to be...
+

fkpipe004
£0.95 (£1.14 inc VAT)
Fuel Pipe, 4mm Bore, 8mm Diameter, Black rubber petrol hose Sold per 12". (30cm) OD: 8mm Price is per foot length.
+

fkpipe035
£0.95 (£1.14 inc VAT)
Breather / Overflow Hose - 3.5mm Bore, 6mm Diameter - Black Rubber Carburettor overflow or breather pipe - s uitable for low pressure uses only. OD: 6mm...
+

clip-r25-F3
£0.95 (£1.14 inc VAT)
P Clip - Zinc Plated Steel and Rubber Lined - 1" (25mm) Absorbs vibrations to prevent damage to hoses and pipes.
+

wash8740
£0.95 (£1.14 inc VAT)
OEM: 29-8740
BSA - 9/16" Plain Washer - Frame, Fuel Tank and Speedo Drive Fitting + Universal Use Locates under the petrol tank fixing socket bolt the top section of...
+

tank8054-E9
£0.95 (£1.14 inc VAT)
OEM: 68-8054
BSA Fuel Tank Mounting Rubber Bush - A50 and A65 Models Circa 1964-70 Locates within the petrol tanks support bracket. Correct fitment on A50 and A65...
+

screw7028
£0.95 (£1.14 inc VAT)
OEM: 21-7028, S7028
Triumph Bracket to Carb Grub Screw - T140E and TSS Models With Twin MKII Amal Carbs Attaches to left hand carb to position the flat bracket that connects...
+

gask101
£0.99 (£1.19 inc VAT)
OEM: 622/101, 6/101, 99-0522, 06-1900, 70-9711, E9711
Amal Carburettor Flange O-Ring Fits the 600 and 900 Carbs, for the inlet flange. Also fits the 376 Monobloc OEM: 622/101, 6/101, 99-0522, 06-1900, 70-9711,...
+

fkclip199-F3
£0.99 (£1.19 inc VAT)
Fuel pipe clip 3/4inch Fuel Pipe Clip 3/4" (13-20mm) Suit pipe of 1/2" Bore
+

fkclip212-F3
£0.99 (£1.19 inc VAT)
Fuel pipe clip 1 inch Fuel Pipe Clip 1" (17-25mm) Suit pipe of 5/8" Bore
+

fkfuel01-F3
£1.00 (£1.20 inc VAT)
Fuel Filter - Nylon Petrol filter, to fit inline, between the petrol tank and the carburettor. Cheap and simple fuel filter. Simply replace them once a year...
+

rubb784-E9
£1.00 (£1.20 inc VAT)
Rubber Fuel tank mounting washers for classic Triumph and BSA 500cc and 650cc models (1964-70). OEM: 82-0967
+

rubb717-E9
£1.00 (£1.20 inc VAT)
Fuel Tank Mounting Rubber for classic Triumph Pre Oil in Frame (OIF) models. OEM: 82-5228, 82-1813
+

amal376/092
£1.05 (£1.26 inc VAT)
OEM: 376/092
Amal Carb Fuel Banjo Bolt Fibre Washer - 375, 376, 389 Monobloc Carburettors Fits 375, 376 and 389 Monobloc Carburettors. OEM: 376/092
+

fkpipe015
£1.10 (£1.32 inc VAT)
Fuel Pipe, Oil Pipe 3/8inch (10mm) Bore, Black rubber petrol hose - Reinforced. Sold per 12". (30cm) OD: 5/8" (16mm) Price is per foot length.
+

rubb812-E9
£1.25 (£1.50 inc VAT)
Fuel Tank Mounting Rubber/Bush - for classic Triumph motorcycles. OEM: 82-9351
+

rubb442H-E9
£1.25 (£1.50 inc VAT)
OEM: 82-5229, 82-4108, 68-8334, 82-3815
Front tank rubber for 500/650 (1964-74) and Triples (1969 on). OEM: 82-5229, 82-4108, 68-8334, 82-3815
+

fkcap060H-F2
£1.25 (£1.50 inc VAT)
OEM: 82-4048, F4048
Fuel Tank Cap 2+1/2" Cork Washer Note: The tank caps as referred to as 2+1/2" caps, the washers are smaller at 2+3/8" OD, to enable fitting inside the...
+

tappart49-91-F3
£1.25 (£1.50 inc VAT)
OEM: A49-91
Fuel Tap Plunger Retaining Screw Overall Length: 5/16" (8mm) UH: 1/4" (6.6mm) - part threaded OEM: A49-91 Please note: Current stock is brass with a...
+

amal151
£1.25 (£1.50 inc VAT)
OEM: 622/151, 6/151, 15-0203, 99-1153
Amal Float Bowl Drain Plug Washer - 600/900 Carburettors OD: 25/32" (19.5mm) ID: 9/15" (13.9mm) OEM:  622/151, 6/151, 15-0203, 99-1153
+

amal-622/086
£1.25 (£1.50 inc VAT)
OEM: 622/086, 99-0521, 19-3093
Genuine Amal Float Bowl and Top Cap Screw and Washer - Concentric Carburettors - 622/086 Secures the mixing bowl float chamber and top caps on MK1...
+

gask199-UK
£1.25 (£1.50 inc VAT)
OEM: 71-3573, NA43A, E4919, 70-4919
Triumph 30mm Carburettor To Manifold Flange Gasket - 650/750cc Models - UK Made Will fit most of the Amal carb flanges, sometimes combined with an...
+

fkpipe088
£1.35 (£1.62 inc VAT)
Fuel Pipe, 6mm Bore, 10mm Diameter - Black Rubber /  Neoprene petrol hose ID: 6mm OD: 10mm Price is per foot length - 12" (30cm) - please add quantity...
+

amal372
£1.45 (£1.74 inc VAT)
OEM: 622/067, 6/067
Amal Needle Clip for 600 and 900 Amal concentric carburettors. OEM: 622/067, 6/067
+

rubb434-E9
£1.45 (£1.74 inc VAT)
Rear Fuel Tank rubber for classic Triumph 500cc and 650cc (1964-69) and classic Triumph Triples (1969-on). OEM: 82-5336
+

amal-adj102
£1.45 (£1.74 inc VAT)
OEM: 5/077, 9/077, 99-7097, 99-0224, 06-7972
Amal Carburettor Cable Adjuster Lock Nut For 600, 900, 276, 376, 389 series Amal carburettors Locks the screw in the top cap to adjust the cable. OEM:...
+

crush-wash351-F3
£1.45 (£1.74 inc VAT)
OEM: 70-7351, E7351
Crush Copper/Rubber Washers for Fuel Tap 1/4" Sealing washer for 1/4" petrol tap - Price for ONE washer. Rubber seal encased in copper, when fitted to fuel...
+

fkpipe090
£1.45 (£1.74 inc VAT)
Fuel Pipe, 8mm Bore, 12mm Diameter - Black Rubber /  Neoprene petrol hose ID: 8mm OD: 12mm Price is per foot length - 12" (30cm) - please add quantity...
+

nut0702-B14
£1.45 (£1.74 inc VAT)
OEM: 14-0702
Triumph Alternator / Carb Manifold Mounting Nut - Unit Twins - 1969 Onwards For mounting the alternator stator on the primary chaincase on 500/650/750cc...
+

amal4/046
£1.45 (£1.74 inc VAT)
OEM: 4/046
Amal Air Valve Return Spring - Pre Monobloc + Monobloc Carburettor Choke spring for use on both pre monobloc and monobloc carbs. Suitable for all 276/289...
+

stud1876-B19
£1.45 (£1.74 inc VAT)
OEM: 21-1876, S1876
Triumph Inlet Manifold to Head Stud - 650/750cc Unit Twins - 1969-82 Correct fitment on T120, TR6, and TR7 models. Overall length: 2" (50.3mm) OD: 1/4"...
+

gask5660
£1.45 (£1.74 inc VAT)
OEM: 70-5660, E5660
Triumph Inlet Manifold Gasket - Unit 650/750cc Single Carb Models - 1967 Onwards Manifold to head joint washer - correct fitment on TR6 models from...
+

gask1418
£1.45 (£1.74 inc VAT)
OEM: 65-1418
BSA 1+5/32" Monobloc Carburettor Flange Joint Washer - Single Carb Models Flange washer suitable for various BSA models fitted with a single monobloc...
+

wtf-fpipe027
£1.45 (£1.74 inc VAT)
5mm Bore Rubber Fuel Hose / Breather Pipe - 8mm OD - Black Flexible black fuel line which can be easily stretched over fittings or fuel taps - resistant...
+

gask031
£1.65 (£1.98 inc VAT)
OEM: 70-6772, E6772
Triumph manifold to head gasket for 500cc models (1968-74) OEM: 70-6772, E6772
+

gask2967
£1.65 (£1.98 inc VAT)
OEM: 70-2967, E2967
Triumph Inlet Manifold Gasket - 350/500cc Single Carb Models Circa 1958-67 - 1" Bore Manifold to head joint washer - correct fitment on 3TA, 5TA, T90,...
+

fktappart022-F3
£1.75 (£2.10 inc VAT)
OEM: 82-8132S, 82-3182, 82-3337, F3182, F3337
Fuel pipe tap nut 1/4" gas thread Diameter across threads inside of nut = 7/16" Hole diameter = 3/8" 1/4 BSP thread, which is approx 1/2" thread diameter...
+

clip100-F3
£1.75 (£2.10 inc VAT)
OEM: 83-1615
Breather Hose Clip 'D' Shape (1971-) - 83-1615 As fitted on T120/TR6/T140 Oil in frame models. Bolt hole = 5mm OEM: 83-1615, F11615
+

screw1953-E9
£1.75 (£2.10 inc VAT)
OEM: 82-1953, F1953
Triumph Fuel Tank Knee Grip Mounting Screw - 500/650cc Pre-Unit and Unit Models Knee pad mounting screws as used on various Triumph pre-unit and unit...
+

tanksc3113m-E9
£1.75 (£2.10 inc VAT)
OEM: 82-3113, F3113
Triumph Name Plate / Badge Screw - Pre-Unit 350/500/650cc Models - 1950-56 Correct fitment for 3T, 5T, T100 and 6T models from 1950-56. Length UH:...

gask3334
£1.75 (£2.10 inc VAT)
OEM: 70-3334, E3334
Triumph Inlet Manifold Gasket - Pre Unit and Unit 650cc Single Carb Models - Circa 1954-66 Manifold to head joint washer - correct fitment on T110, TR6...
+

bolt0361-B18
£1.75 (£2.10 inc VAT)
OEM: 57-0361, T361
Triumph Gearbox Level Plug Bolt - Unit 350/500/650cc Models Circa 1959-68 + Knee Grip Mounting Plates Level plug bolts for use with drain plug 57-1112....
+

amal-622/077
£1.75 (£2.10 inc VAT)
OEM: 622/077
Genuine Amal Throttle Stop / Idle Adjuster Screw - Concentric Carburettors - 622/077 Throttle adjustment screw, as used on all concentric carbs, both 600...
+

amal-622/076
£1.75 (£2.10 inc VAT)
OEM: 622/076, 99-0515
Genuine Amal Pilot Air Adjuster Screw - Concentric Carburettors - 622/076 Tapered air mixture adjustment screw for  use on MK1 concentric carbs, both 600...
+

wtf-fpipe076-blk
£1.75 (£2.10 inc VAT)
5mm Bore Fuel Hose / Breather Pipe - 8mm OD - Black, Red or Blue High quality shiny rubber fuel line - resistant to weathering, kinking, abrasion and...
 

fkpipe227
£1.85 (£2.22 inc VAT)
5/8inch (16mm) id, 2.5mm thick, Reinforced. Fuel Line 5/8inch (16mm) Reinforced Plain fuel line, sold per 12" (30cm) OD: 7/8" (22mm) 2.5mm thick,...
+

fktappart027-F3
£1.95 (£2.34 inc VAT)
Fuel Tap Pipe Spigot for 1/4" Gas Thread Nut Suitable for 1/4" thread. Requires a nut to attach to the fuel tap - see related products
+

amal-adj001
£1.95 (£2.34 inc VAT)
OEM: 4/035, 9/035, 99-1024, 99-7096
Amal Carburettor Cable Adjuster For 600, 900, 276, 376, 389 series Amal carburettors Screws into the top cap to adjust the cable. OEM: 4/035, 9/035,...
+

rubb057-E9
£1.95 (£2.34 inc VAT)
OEM: 01-4995
Fuel Tank Mounting Rubber AJS/Matchless (Thick). 5/8" Thick and with a 3/8" hole. OEM: 01-4995
+

rubb058-A-E9
£1.95 (£2.34 inc VAT)
OEM: 01-4996
Fuel Tank Mounting Rubber for AJS and Matchless motorcycles (Thin). 1/4 inch thick with a 3/8 inch hole. OEM: 01-4996
+

rubb329H-E9
£1.95 (£2.34 inc VAT)
OEM: 97-5061
Fuel Tank Centre Grommet for the classic Triumph T140 Fuel Tank. Quality grade rubber product. OEM: 97-5061
+

rubb858M-E9
£1.95 (£2.34 inc VAT)
OEM: 82-9064, 40-8085
Fuel Tank Centre mounting rubber. Fits the classic Triumph T140, T120, and TR25W models. Also compatible with the BSA B50 and B25 models etc. OEM: 82-9064,...
+

rubb301-E9
£1.95 (£2.34 inc VAT)
OEM: 82-9093, 83-1461, 40-8046, 06-7729, NM19093
Anti-roll rubber for the classic Triumph T140. Also fits BSA and Norton motorcycle models. Also used as seat rubbers. OEM: 82-9093, 83-1461, 40-8046,...
+

Amal928/103
£1.95 (£2.34 inc VAT)
OEM: 928/103, 9/103
Amal Carb Choke air Valve Spring Guide Choke valve guide for Amal 900 Series carburettors OEM: 928/103, 9/103
+

clip4-230
£1.95 (£2.34 inc VAT)
OEM: 4/230
Amal Monobloc Needle Retaining Clip - OEM: 4/230
+

fuelfilt-round-F3
£1.95 (£2.34 inc VAT)
Fuel Filter - Round, Clear Petrol filter Cheap and simple fuel filter. Easy to see if it's clear or dirty. Suit 1/4inch (6mm) bore pipe.
+

stub7103
£1.95 (£2.34 inc VAT)
OEM: 71-3313, 71-7103, E17103, E13313
Triumph - Inlet Manifold Balance Pipe Connector - T140 - 1973-78 Balance pipe stub connector to connect the inlet manifolds Made in England using the...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.