.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Carburation/Fuel

fuel-clip-band-906
£0.30 (£0.36 inc VAT)
Fuel Pipe Spring Band Clamp - 6mm, 8mm, 10mm, 12mm and 14mm Squeeze the ends to fit onto the fuel line, constant tension is applied to secure the pipe....
 

o-clip-13mm-F3
£0.40 (£0.48 inc VAT)
Fuel Pipe O Clips - Double Ear - 11-13mm Fuel Pipe Clip 11-13mm Suit pipe of 1/4" Bore
+

o-clip-15mm-F3
£0.40 (£0.48 inc VAT)
Fuel Pipe O Clips - Double Ear - 13-15mm Fuel Pipe Clip 13-15mm Suit pipe of 3/8" Bore
+

o-clip-12mm-F3
£0.40 (£0.48 inc VAT)
Fuel Pipe O Clips - Double Ear - 10-12mm Fuel Pipe Clip 10-12mm Suit pipe of 1/4" Bore
+

tanksc/nut8317-E9
£0.45 (£0.54 inc VAT)
OEM: 65-8317, 42-8034
BSA Tank Badge Mounting Screw and Nut - Various Singles and Twins Countersunk screw and nut used to secure fuel/oil tank badges on various models...
+

seal9001
£0.45 (£0.54 inc VAT)
OEM: 82-9001, F9001, 68-4635
BSA/Triumph Air Filter to Carburettor O Ring Seal - A50 and A65 Models + Unit Singles Rubber O ring seal - correct fitment on A50, A65, B44, B25, C25...
+

amal-622/082
£0.45 (£0.54 inc VAT)
OEM: 622/082, 99-0520
Amal Idle and Throttle Stop Friction O Ring - Concentric Carburettors - 622/082 Nitrile O ring seal for throttle adjustment screw, as used on all...
+

nut1877-B14
£0.45 (£0.54 inc VAT)
OEM: 21-1877, S1877
1/4" UNF Nut - Triumph Inlet Manifold to Head Nut - 650/750cc Unit Twins Circa 1969-82 + Universal Use Inlet manifold to head stud securing nut on T100,...
+

wash0002-F3
£0.45 (£0.54 inc VAT)
OEM: 83-0002, F10002
Fuel Tap Steel Sealing Washer - 1/4" BSP Petrol Taps Thin flat steel fuel tap washer which locates between the Dowty washer and tap locknut to ensure a...
+

o-clip-18mm-F3
£0.45 (£0.54 inc VAT)
Fuel Pipe Double Ear O Clip - Suitable for 15-18mm Outside Diameter Pipe The double ear design provides extra grip and constant pressure. Smooth edges...
+

fkclip183-F3
£0.65 (£0.78 inc VAT)
Fuel pipe clip 1/2inch - 8-12mm Fuel Pipe Clip 1/2" (8-12mm) Worm Drive Jubilee Clip Type Suit pipe of 1/4" Bore
+

wash0660
£0.65 (£0.78 inc VAT)
OEM: 30-0660, 30-660
BSA - 7/16" Plain Washer - Fuel Tank and Frame + Universal Use Rear fuel bank support bolt washer on rigid and plunger frame C10, C11, B31, B32, B33,...
+

fkclip013-F3
£0.75 (£0.90 inc VAT)
Fuel pipe clip 1/2inch. Fuel Pipe Clip 1/2"
+

fkclip015-F3
£0.75 (£0.90 inc VAT)
Fuel pipe clip 5/8inch. Fuel Pipe Clip 5/8"
+

cap061-std-F2
£0.75 (£0.90 inc VAT)
OEM: 82-4047
Fuel Tank / Oil Tank Cap 2" Cork Washer External diameter - 1+7/8" (47mm) Internal diameter - 1+5/16 (33mm) OEM: 82-4047, F4047, 75-5109 Available as...
 

fkclip185-F3
£0.75 (£0.90 inc VAT)
Fuel pipe clip 5/8inch - 10-16mm Fuel Pipe Clip 5/8" (10-16mm) Worm Drive Jubilee Clip Type Suit pipe of 3/8" or 5/16" Bore
+

tank4317-E9
£0.75 (£0.90 inc VAT)
OEM: 82-4317
Triumph Spire Nut/Retaining Clip for Side Panel Script Simply push on to the badge spigot, please take care, once fitted to the spigot they are almost...
+

pipe8592-F3
£0.75 (£0.90 inc VAT)
OEM: 82-8592
9/16" OD Fuel Pipe / Oil Pipe Ferrule To fit 5/16" or 7/16" bore tubing with an outside diameter of 9/16'' (14.3mm) Ideally crimp on to the fuel or oil...
+

panel7020-E9
£0.75 (£0.90 inc VAT)
OEM: 21-7020, S7020
Triumph T140/TR7 Spire Nut/Retaining Clip for Side Panel Badge Fits behind the side panel badge and is then secured with the countersunk screw - see...
+

tank1931-E9
£0.75 (£0.90 inc VAT)
OEM: 97-1931, H1931
Triumph Fuel Tank + Mirror Mounting Distance Piece - Later T140 Models From 1985 Onwards Hard rubber spacer locates above the tie strap when mounting the...
+

wash071-F3
£0.75 (£0.90 inc VAT)
5/8" ID Bonded Seals Dowty Washer Suitable for 3/8" BSP Fuel Taps Fuel tap sealing washer with bonded rubber inner section. Suitable for use with 3/8"...
+

tanksc4468-E9
£0.75 (£0.90 inc VAT)
OEM: 82-4468, F4468
3BA Countersunk Tank Badge Screw - T20 Models Circa 1959 Onwards + Universal Use As used on Triumph T20 Tiger Cub models with garden gate type badges +...

wash350-F3
£0.75 (£0.90 inc VAT)
Bonded Seals Dowty Washer Suitable for 1/8" BSP Fuel Taps - ID 3/8" Fuel tap sealing washer with bonded rubber inner section. Suitable for use with 1/8"...
+

fkpipe017
£0.80 (£0.96 inc VAT)
3/16inch id, 2.7mm thick, REINFORCED. Fuel Line 3/16"(5mm) CLEAR Plain fuel line, sold per 12" (30cm) 2.7mm thick, reinforced nylon braid PVC OD: 3/8" (9.5mm)
+

fkpipe018
£0.80 (£0.96 inc VAT)
1/4inch id, 2.7mm thick, REINFORCED. Fuel Line 1/4" (6.5mm) REINFORCED Plain fuel line, sold per 12" 2.7mm thick, reinforced nylon braid PVC OD: 7/16"...
+

fkpipe013
£0.80 (£0.96 inc VAT)
1/4 inch (6.5mm) id, 2m thick, CLEAR. Fuel Line 1/4" (6.5mm) CLEAR Plain fuel line, sold per 12" (30cm) OD: 7/16" (11mm) 2mm thick, clear plain PVC Photos...
+

fkpipe012
£0.80 (£0.96 inc VAT)
3/16inch (5mm) id, 2mm thick, CLEAR. Fuel Line 3/16" (5mm) CLEAR Plain fuel line, sold per 12" (30cm) OD: 5/16" (8.5mm) 2mm thick, clear plain PVC
+

fkpipe032
£0.80 (£0.96 inc VAT)
1/8inch (3mm) id, 1mm thick, CLEAR. Fuel Line 3/16" (5mm) CLEAR Plain fuel line, sold per 12" (30cm) 1mm thick, clear plain PVC OD: 3/16" 5mm Suitable for...
+

fkpipe416
£0.90 (£1.08 inc VAT)
Fuel Pipe 1/4inch (6.5mm) Bore, Black rubber petrol hose - Reinforced. Sold per 12". (30cm) OD: 1/2" (13mm) Price is per foot length.
+

fkpipe016
£0.90 (£1.08 inc VAT)
Fuel Pipe, Oil Pipe 5/16inch (8mm) Bore, Black rubber petrol hose - Reinforced. Sold per 12". (30cm) OD: 9/16" (14.5mm) Price is per foot length.
+

fktappart106-F3
£0.95 (£1.14 inc VAT)
Fuel Tap Cork For Pull On Type Fuel Taps - 3/8" Normally you will require one cork per tap. Price is for ONE cork Note: These corks are bigger than you...
+

fktappart105-F3
£0.95 (£1.14 inc VAT)
Motorcycle Fuel Tap Cork Diameter: 9/16" Length: 1/4" For slide type Motorcycle fuel taps Price is for ONE cork Normally you would require 2 corks per tap.
+

fkwash073-F3
£0.95 (£1.14 inc VAT)
OEM: 70-7351, E7351, 70-6961, E6961
Dowty Washers for Fuel Tap 1/4" Rubber inner section Hole id 1/2" Used for fuel petrol tap seal, also tacho drive seal, and other uses across the range of...
+

pipe021m-F3
£0.95 (£1.14 inc VAT)
1/2" OD Fuel Pipe / Oil Pipe Ferrule To fit 1/4'' (6.4mm) bore tubing with an outside diameter of 1/2'' (12.7mm) Ideally crimp on to the fuel or oil pipe...
+

fkpipe019
£0.95 (£1.14 inc VAT)
Fuel Pipe 3/16inch (5mm) Bore, Black rubber petrol hose - Reinforced. Sold per 12". (30cm) OD: 7/16" (11.5mm) Price is per foot length.
+

tanksc814-E9
£0.95 (£1.14 inc VAT)
OEM: 82-7888
Tank Badge Screw - Triumph Triumph Tank Badge Screw for T100, T120, T140, T150 models. Chrome plated. Short type : 8mm Price is for ONE screw For...

tanksc816-E9
£0.95 (£1.14 inc VAT)
OEM: 83-1339
Tank Badge Screw - Triumph Triumph Tank Badge Screw for T100, T120, T140, T150 models. Chrome plated. Also fits side panel / name plate Long type...

gask199-std
£0.95 (£1.14 inc VAT)
OEM: 71-3573, NA43A, E4919, 70-4919
Triumph 30mm Carburettor To Manifold Flange Gasket - 650/750cc Models - Standard Will fit most of the Amal carb flanges, sometimes combined with an...
+

wash3814-E9
£0.95 (£1.14 inc VAT)
OEM: 82-3814, F3814
Triumph Fuel Tank Mounting Cupped Washer - Pre Unit and Unit Models Circa 1963-82 Rubber washer support cup as used to mount the fuel tank on many pre...
+

screw205-B18
£0.95 (£1.14 inc VAT)
OEM: 82-4129, F4129
Contersunk Screw - Rotor Cover or Tank Badge - 82-4129 To screw the rotor cover on the primary chaincase. Can also be used for Tank Badges, but my need to be...
+

fkpipe004
£0.95 (£1.14 inc VAT)
Fuel Pipe, 4mm Bore, 8mm Diameter, Black rubber petrol hose Sold per 12". (30cm) OD: 8mm Price is per foot length.
+

fkpipe035
£0.95 (£1.14 inc VAT)
Breather / Overflow Hose - 3.5mm Bore, 6mm Diameter - Black Rubber Carburettor overflow or breather pipe - s uitable for low pressure uses only. OD: 6mm...
+

clip-r25-F3
£0.95 (£1.14 inc VAT)
P Clip - Zinc Plated Steel and Rubber Lined - 1" (25mm) Absorbs vibrations to prevent damage to hoses and pipes.
+

wash8740
£0.95 (£1.14 inc VAT)
OEM: 29-8740
BSA - 9/16" Plain Washer - Frame, Fuel Tank and Speedo Drive Fitting + Universal Use Locates under the petrol tank fixing socket bolt the top section of...
+

tank8054-E9
£0.95 (£1.14 inc VAT)
OEM: 68-8054
BSA Fuel Tank Mounting Rubber Bush - A50 and A65 Models Circa 1964-70 Locates within the petrol tanks support bracket. Correct fitment on A50 and A65...
+

screw7028
£0.95 (£1.14 inc VAT)
OEM: 21-7028, S7028
Triumph Bracket to Carb Grub Screw - T140E and TSS Models With Twin MKII Amal Carbs Attaches to left hand carb to position the flat bracket that connects...
+

gask101
£0.99 (£1.19 inc VAT)
OEM: 622/101, 6/101, 99-0522, 06-1900, 70-9711, E9711
Amal Carburettor Flange O-Ring Fits the 600 and 900 Carbs, for the inlet flange. Also fits the 376 Monobloc OEM: 622/101, 6/101, 99-0522, 06-1900, 70-9711,...
+

fkclip199-F3
£0.99 (£1.19 inc VAT)
Fuel pipe clip 3/4inch Fuel Pipe Clip 3/4" (13-20mm) Suit pipe of 1/2" Bore
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.