.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Bike Specific Tools

tool1861c
£10.95 (£13.14 inc VAT)
OEM: 60-1861, 61-7014, DA50/1, 61-3766, D1861
Triumph/BSA Clutch Centre Puller - 1" x 20TPI - Twins Pulls the clutch hub from the taper on the main shaft. Fits BSA twin cylinder models, A50/A65...
+

tool3170
£10.95 (£13.14 inc VAT)
OEM: 61-3170, 61-3700
Clutch Spring adjustment Tool. Measures aproximately 3". For Triumph and BSA models. Helps to adjust the clutch pressure plate springs. OEM: 61-3170,...
+

tool7019H
£3.95 (£4.74 inc VAT)
OEM: 61-7019
Triumph Rocker Spindle O Ring Guide Tool - All Pre Unit + Unit 650/750cc Models Can be used on all pre-unit models + 650/750cc twins + 750cc triples....
+

tool509
£15.95 (£19.14 inc VAT)
Triumph Rocker Box Inspection Cap Removal Tool - Unit Twins Circa 1959-72 Can be used on cross slotted type rocker box caps, as used on various models...
+

tool3760
£9.95 (£11.94 inc VAT)
OEM: 61-3760
Triumph / BSA Clutch Locking Plate Tool - 3 or 4 Spring Clutch Correct tool to lock up the clutch when you want to remove the flywheel nuts or clutch...
+

tool526
£7.95 (£9.54 inc VAT)
Chaincase Plug / Cap Removal and Inspection Tool - Universal Use Three way tool for the removal and inspection of slotted type chaincase plugs as used on...
+

tool7012
£5.45 (£6.54 inc VAT)
OEM: 61-7012, 60-2108, 60-0496, D2108, D496
Triumph/BSA Primary Chain Adjuster Tool - Unit 350/500/650/750cc Models Primary chain tensioner screwdriver for use on many unit Triumph and BSA single...
+

tool9114
£2.45 (£2.94 inc VAT)
OEM: 67-9114
BSA Pushrod Locating and Alignment Comb/Tool - A10, A7 The correct tool for use on BSA 500/650cc twins OEM: 67-9114
+

tool505
£13.95 (£16.74 inc VAT)
Tappet Adjustment tool - Norton, BSA, Triumph - 5/16" Tappet Screws Makes valve adjusting easier. Fits most Triumph 500/650/750 twins circa 1950-1970....
+

tool2213
£52.95 (£63.54 inc VAT)
OEM: 60-2213, D2213, Z89, Z144, Z145
Triumph Cam Pinion/Gear Extractor and Fitting Tool - 350/500/650cc Unit and Pre Unit Twins For the effective removal and installation of exhaust and...
+

tool0220
£12.95 (£15.54 inc VAT)
OEM: 60-0220, D220
Triumph Combination Fork Spanner - Pre Unit + 500/650cc Unit Models - Circa 1950-68 Double ended fork stanchion top nut, bottom damper nut and oil seal...
+

tool533M
£29.95 (£35.94 inc VAT)
OEM: 61-6017
Fork Seal Holder Remover Tool - 61-6017 Universal fork seal removal tool with threaded holes. Powder coated. Perfect to loosen off the seal holders on...
+

tool577
£7.45 (£8.94 inc VAT)
OEM: 60-0527, D527
Triumph Lower Fork Bush/Bearing Nut Removal Tool - Pre Unit and Unit Twins Tool with four tabs to remove and install the lower fork bearing nuts....
+

tool223
£3.95 (£4.74 inc VAT)
OEM: 60-2184, D2184
Triumph Open Square Type Tappet Adjustment Spanner Fits all square tappet adjusters Holds tappet adjuster while you tighten locknut OEM:  60-2184,...
+

tool1861m
£10.95 (£13.14 inc VAT)
OEM: 60-1861, 61-7014, DA50/1, 61-3766, D1861
K2F Magneto Gear/Pinion Puller Tool - 1" Thread - Pre Unit Triumph + BSA A7 and A10 Models Used to withdraw the magneto pinion on K2F magnetos, as...
+

tool3694
£37.95 (£45.54 inc VAT)
OEM: 61-3694, 61-7024
Wheel Bearing Retainer Lock Ring Pin Spanner / Tool Used to remove and install the lock rings that hold the wheel bearings. Suitable for most Triumph,...
+

tool524
£8.95 (£10.74 inc VAT)
Valve Guide Drift Tool 5/16" (8mm) - Norton, BSA, Triumph A stepped tool providing a safe and easy way to remove and install valve guides without...
+

tool7022-T13
£9.95 (£11.94 inc VAT)
OEM: 61-7022, 60-1859, D1859
Triumph T.D.C - Top Dead Centre Timing Tool - UNC Thread - Unit Twins From 1969 Onwards Crankshaft T.D.C position plunger locking tool suitable for all...
+

tool521-T13
£13.45 (£16.14 inc VAT)
Stainless Steel Top Dead Centre (TDC) Timing Tool - Dual Thread - Triumph This crankshaft lock tool is for early Unit Triumphs 1963 up to and...
+

tool3362
£10.95 (£13.14 inc VAT)
OEM: 61-3362
BSA Clutch Hub Extractor / Puller - Internal Thread - Single Spring or 6 Spring Clutch Clutch hub extractor tool suitable for many models with a six...
+

tool3276
£36.95 (£44.34 inc VAT)
OEM: 61-3276, 61-6046, 61-1732
Triumph/BSA - Universal Engine Sprocket Extractor Universal engine sprocket puller suitable for Triumph and BSA models - simply screw into the...
+

tool6008
£27.95 (£33.54 inc VAT)
OEM: Z23, 61-6008
Triumph Tappet Guide Block Drift Tool - Unit and Pre Unit 500/650cc Twins + 750cc Triples Suitable for all OHV Triumph two and three cylinder models...
+

spann124
£15.95 (£19.14 inc VAT)
Tube spanner for Triumph 4 speed sprocket nut 1+3/4" Measures 44mm across inside flats. Sometimes it's the only way to get to the sprocket nut! OEM: 61-6061
+

tool7023
£10.95 (£13.14 inc VAT)
OEM: 61-7023, 60-0782
Triumph/BSA Advance and Retard Extractor Tool Made in England OEM: 61-7023, 60-0782
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.