Workshop :: Spanners & Tools

CODE: timingdisc-T13

Engine Timing Disc - Degrees of crankshaft rotation

£2.99 (£3.59 inc VAT)

Engine Timing Disc - Degrees of crankshaft rotation A must for the tool box of any motorcycle enthusiast. To help set up ignition timing, or camshaft...

Quantity:

+ −

CODE: tool1861c

Triumph/BSA Clutch Centre Puller - 1" x 20TPI - Twins

£10.95 (£13.14 inc VAT)

OEM: 60-1861, 61-7014, DA50/1, 61-3766, D1861

Triumph/BSA Clutch Centre Puller - 1" x 20TPI - Twins Pulls the clutch hub from the taper on the main shaft. Fits BSA twin cylinder models, A50/A65...

Quantity:

+ −

CODE: tool3170

Clutch Spring Adjustment Tool - Triumph, BSA

£10.95 (£13.14 inc VAT)

OEM: 61-3170, 61-3700

Clutch Spring adjustment Tool. Measures aproximately 3". For Triumph and BSA models. Helps to adjust the clutch pressure plate springs. OEM: 61-3170,...

Quantity:

+ −

Top Dead Centre Timing Tool Fits 14mm Spark Plug Hole

CODE: tool024-T13

TDC Timing Tool

£13.95 (£16.74 inc VAT)

Top Dead Centre Timing Tool Fits 14mm Spark Plug Hole. The scaled measurements are in mm. Simply remove the spark plug and screw in the tool, resting the...

Quantity:

+ −

CODE: tool7019H

Triumph Rocker Spindle O Ring Guide Tool - All Pre Unit + Unit 650/750cc Models

£3.95 (£4.74 inc VAT)

OEM: 61-7019

Triumph Rocker Spindle O Ring Guide Tool - All Pre Unit + Unit 650/750cc Models Can be used on all pre-unit models + 650/750cc twins + 750cc triples....

Quantity:

+ −

CODE: thread-gauge

Screw Thread pitch Gauge - Imperial & Metric

£5.45 (£6.54 inc VAT)

Screw Thread pitch Gauge - Imperial & Metric 0.25 - 6mm 4 - 62BSW 52 leaves of measurement variations Useful tool to check the thread TPI on your nuts...

Quantity:

+ −

CODE: tool3760

Triumph / BSA Clutch Locking Plate Tool - 3 or 4 Spring Clutch

£9.95 (£11.94 inc VAT)

OEM: 61-3760

Triumph / BSA Clutch Locking Plate Tool - 3 or 4 Spring Clutch Correct tool to lock up the clutch when you want to remove the flywheel nuts or clutch...

Quantity:

+ −

CODE: fkwhitw-01

Whitworth Combination Spanners - 8 Piece

£18.50 (£22.20 inc VAT)

Whitworth Combination Spanners Set of 8 Spanners, open end and ring 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16

Quantity:

+ −

CODE: tool526

Chaincase Plug / Cap Removal and Inspection Tool - Universal Use

£7.95 (£9.54 inc VAT)

Chaincase Plug / Cap Removal and Inspection Tool - Universal Use Three way tool for the removal and inspection of slotted type chaincase plugs as used on...

Quantity:

+ −

CODE: td-tool126-T8

Whitworth BSW Tap & Die Set - 23 Piece - 1/8" to 1/2" Imperial Sizes

£22.95 (£27.54 inc VAT)

Whitworth BSW Tap & Die Set - 23 Piece - 1/8" to 1/2" Imperial Sizes Ideal for creating and repairing popular Whitworth threads. Tap wrench with...

Quantity:

+ −

61-7012, 60-2108, 60-0496, D2108, D496 - Triumph/BSA Primary Chain Adjuster Tool

CODE: tool7012

Triumph/BSA Primary Chain Adjuster Tool - Unit 350/500/650/750cc Models

£5.45 (£6.54 inc VAT)

OEM: 61-7012, 60-2108, 60-0496, D2108, D496

Triumph/BSA Primary Chain Adjuster Tool - Unit 350/500/650/750cc Models Primary chain tensioner screwdriver for use on many unit Triumph and BSA single...

Quantity:

+ −

CODE: tool9114

BSA Pushrod Locating and Alignment Comb/Tool - A10, A7

£2.45 (£2.94 inc VAT)

OEM: 67-9114

BSA Pushrod Locating and Alignment Comb/Tool - A10, A7 The correct tool for use on BSA 500/650cc twins OEM: 67-9114

Quantity:

+ −

CODE: tool505

Tappet Adjustment tool - Norton, BSA, Triumph - 5/16" Tappet Screws

£13.95 (£16.74 inc VAT)

Tappet Adjustment tool - Norton, BSA, Triumph - 5/16" Tappet Screws Makes valve adjusting easier. Fits most Triumph 500/650/750 twins circa 1950-1970....

Quantity:

+ −

CODE: rimprotect-T14

Wheel Rim Protectors

£5.95 (£7.14 inc VAT)

Wheel Rim Protectors For tyre changing, used to protect the rims from damage with the tyre levers. Supplied as a Pair, with connecing cord.

Quantity:

+ −

Save 12%

CODE: spn099

8 Piece Set 1/2" Drive Whitworth Sockets

£16.95 £14.95 (£17.94 inc VAT)

8 Piece Set 1/2" Drive Whitworth Sockets Set contents 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8 Whitworth. Whitworth tool, socket tools, half inch drive.

Quantity:

+ −

CODE: tool2213

Triumph Cam Pinion/Gear Extractor and Fitting Tool - 350/500/650cc Unit and Pre Unit Twins

£52.95 (£63.54 inc VAT)

OEM: 60-2213, D2213, Z89, Z144, Z145

Triumph Cam Pinion/Gear Extractor and Fitting Tool - 350/500/650cc Unit and Pre Unit Twins For the effective removal and installation of exhaust and...

Quantity:

+ −

CODE: tool0220

Triumph Combination Fork Spanner - Pre Unit + 500/650cc Unit Models - Circa 1950-68

£12.95 (£15.54 inc VAT)

OEM: 60-0220, D220

Triumph Combination Fork Spanner - Pre Unit + 500/650cc Unit Models - Circa 1950-68 Double ended fork stanchion top nut, bottom damper nut and oil seal...

Quantity:

+ −

CODE: td-tool098-T8

BSF Tap and Die Set - 20 Piece Set - 3/16" to 1/2" British Standard Fine Thread

£19.95 (£23.94 inc VAT)

BSF Tap and Die Set - 20 Piece Set - 3/16" to 1/2" British Standard Fine Thread Ideal for threading and repairing many popular BSF threads. Tap wrench...

Quantity:

+ −

CODE: tool533M

Fork Seal Holder Remover Tool - 61-6017

£29.95 (£35.94 inc VAT)

OEM: 61-6017

Fork Seal Holder Remover Tool - 61-6017 Universal fork seal removal tool with threaded holes. Powder coated. Perfect to loosen off the seal holders on...

Quantity:

+ −

CODE: td-tool103-T8

UNC UNF Tap & Die Set - 24 Piece - 1/16" to 1/2" Imperial Sizes

£19.95 (£23.94 inc VAT)

UNC UNF Tap & Die Set - 24 Piece - 1/16" to 1/2" Imperial Sizes Ideal for creating and repairing popular UNF and UNC threads. Tap wrench with...

Quantity:

+ −

60-0527, D527 - Triumph Lower Fork Bush/Bearing Nut Removal Tool - Pre Unit and Unit Twins

CODE: tool577

Triumph Lower Fork Bush/Bearing Nut Removal Tool - Unit 500/650/750cc Twins and Triples

£7.45 (£8.94 inc VAT)

OEM: 60-0527, D527

Triumph Lower Fork Bush/Bearing Nut Removal Tool - Pre Unit and Unit Twins Tool with four tabs to remove and install the lower fork bearing nuts....

Quantity:

+ −

CODE: tool223

Triumph Open Square Type Tappet Adjustment Spanner

£3.95 (£4.74 inc VAT)

OEM: 60-2184, D2184

Triumph Open Square Type Tappet Adjustment Spanner Fits all square tappet adjusters Holds tappet adjuster while you tighten locknut OEM: 60-2184,...

Quantity:

+ −

CODE: tool1861m

K2F Magneto Gear/Pinion Puller Tool - 1" Thread - Pre Unit Triumph + BSA A7 and A10 Models

£10.95 (£13.14 inc VAT)

OEM: 60-1861, 61-7014, DA50/1, 61-3766, D1861

K2F Magneto Gear/Pinion Puller Tool - 1" Thread - Pre Unit Triumph + BSA A7 and A10 Models Used to withdraw the magneto pinion on K2F magnetos, as...

Quantity:

+ −

CODE: punch104-T5

Gasket Hole Punch Set - Paper & Cork - 12 Piece from 3mm to 19mm

£8.95 (£10.74 inc VAT)

Gasket Hole Punch Set - Paper & Cork - 12 Piece from 3mm to 19mm Heat treated, high quality carbon steel with k nurled bodies for a secure grip....

Quantity:

+ −

CODE: tool3276

Triumph/BSA - Universal Engine Sprocket Extractor

£36.95 (£44.34 inc VAT)

OEM: 61-3276, 61-6046, 61-1732

Triumph/BSA - Universal Engine Sprocket Extractor Universal engine sprocket puller suitable for Triumph and BSA models - simply screw into the...

Quantity:

+ −

CODE: tool524

Valve Guide Drift Tool 5/16" (8mm) - Norton, BSA, Triumph

£8.95 (£10.74 inc VAT)

Valve Guide Drift Tool 5/16" (8mm) - Norton, BSA, Triumph A stepped tool providing a safe and easy way to remove and install valve guides without...

Quantity:

+ −

CODE: tool521-T13

Stainless Steel Top Dead Centre (TDC) Timing Tool - Dual Thread - Triumph

£13.45 (£16.14 inc VAT)

Stainless Steel Top Dead Centre (TDC) Timing Tool - Dual Thread - Triumph This crankshaft lock tool is for early Unit Triumphs 1963 up to and...

Quantity:

+ −

CODE: tool3362

BSA Clutch Hub Extractor / Puller - Internal Thread - Single Spring or 6 Spring Clutch

£10.95 (£13.14 inc VAT)

OEM: 61-3362

BSA Clutch Hub Extractor / Puller - Internal Thread - Single Spring or 6 Spring Clutch Clutch hub extractor tool suitable for many models with a six...

Quantity:

+ −

CODE: tool7022-T13

Triumph T.D.C - Top Dead Centre Timing Tool - UNC Thread - Unit Twins From 1969 Onwards

£9.95 (£11.94 inc VAT)

OEM: 61-7022, 60-1859, D1859

Triumph T.D.C - Top Dead Centre Timing Tool - UNC Thread - Unit Twins From 1969 Onwards Crankshaft T.D.C position plunger locking tool suitable for all...

Quantity:

+ −

CODE: pos-stop-T13

Positive Stop TDC Timing Tool - 10mm, 12mm, 14mm

£22.95 (£27.54 inc VAT)

Positive Stop Timing Tool - The best way to find TDC - Top Dead Centre Available in 3 thread sizes: 10mm, 12mm and 14mm 10mm (uses NGK plugs beginning with...

Select Options

CODE: t-lever

Tyre Lever - Alloy Steel - 240mm

£4.95 (£5.94 inc VAT)

9+1/2" (240mm) Tyre lever made from quality forged steel.

Quantity:

+ −

CODE: plug-tool242

3 Piece Thin Wall Spark Plug Socket Set - 14mm, 16mm and 18mm - 3/8" Drive

£5.95 (£7.14 inc VAT)

3 Piece Thin Wall Spark Plug Socket Set - 14mm, 16mm and 18mm - 3/8" Drive Set of spark plug socket spanners with thin walls to fit narrow spark plug...

Quantity:

+ −

CODE: spann124

Triumph Sprocket Nut Spanner - 1+3/4

£15.95 (£19.14 inc VAT)

Tube spanner for Triumph 4 speed sprocket nut 1+3/4" Measures 44mm across inside flats. Sometimes it's the only way to get to the sprocket nut! OEM: 61-6061

Quantity:

+ −

CODE: tool6008

Triumph Tappet Guide Block Drift Tool - Unit and Pre Unit 500/650cc Twins + 750cc Triples

£27.95 (£33.54 inc VAT)

OEM: Z23, 61-6008

Triumph Tappet Guide Block Drift Tool - Unit and Pre Unit 500/650cc Twins + 750cc Triples Suitable for all OHV Triumph two and three cylinder models...

Quantity:

+ −

CODE: fkfeeler01

Feeler Gauge Set - mm/inch

£9.45 (£11.34 inc VAT)

Feeler Gauge Set - mm/inch Set of Feeler Gauges, 26 blades, in Metric and Imperial, mm and inches.

Quantity:

+ −

CODE: tool110

Piston ring compressor 70-75mm

£7.95 (£9.54 inc VAT)

Piston ring compressor 70-75mm

Quantity:

+ −

CODE: tool7023

Triumph/BSA Advance and Retard Extractor Tool

£10.95 (£13.14 inc VAT)

OEM: 61-7023, 60-0782

Triumph/BSA Advance and Retard Extractor Tool Made in England OEM: 61-7023, 60-0782

Quantity:

+ −

CODE: tool0779

Fork Stanchion Top Nut Spanner / Wrench - 1+5/16" and 1+1/2"

£12.95 (£15.54 inc VAT)

OEM: 60-0779, D779

Fork Stanchion Top Nut Spanner / Wrench - 1+5/16" and 1+1/2" Double ended fork top nut spanner for use on many models Overall length: 8+1/2" (21.4cm)...

Quantity:

+ −

CODE: tool9243

BSA Fork Top Nut and Gland Nut Combined Spanner - A, B and C Group Models

£9.95 (£11.94 inc VAT)

OEM: 65-9243

BSA Fork Top Nut and Gland Nut Combined Spanner - A, B and C Group Models Double ended fork stanchion top nut and gland nut tool. The C spanner end also...

Quantity:

+ −

CODE: tool104

Piston ring compressor 65-70mm

£7.95 (£9.54 inc VAT)

Piston ring compressor 65-70mm

Quantity:

+ −

CODE: spokewre1

1PC Spoke Wrench Spanner

£6.95 (£8.34 inc VAT)

1 Piece Spoke Wrench Spanner Sizes 1, 2, 3, 4, 5 & 6 Sizes 6.4mm to 4.3mm

Quantity:

+ −

CODE: tool3583

Clutch Hub Extractor Tool - BSA/Triumph Unit Singles

£17.95 (£21.54 inc VAT)

OEM: 61-3583

Clutch Hub Extractor Tool - BSA/Triumph Unit Singles Suitable for Unit Single Models from 1958-73 including: BSA C15, C25, B25, B40, B44, B50, Triumph...

Quantity:

+ −

CODE: off-tool002

Ossa/Maico Flywheel Puller/Extractor Tool - Motoplat Ignition - M27 x 1.25mm Right Hand Thread

£6.95 (£8.34 inc VAT)

Ossa/Maico Flywheel Puller/Extractor Tool - Motoplat Ignition - M27 x 1.25mm Right Hand Thread Suitable for Ossa and Maico models fitted with Motoplat...

Quantity:

+ −

CODE: valve-grind

Valve Grinding Stick and Paste

£9.95 (£11.94 inc VAT)

Valve Grinding Stick and Paste The stick has rubber ends, one large and one small, to stick to the valve head. The valve grinding paste has Coarse paste...

Quantity:

+ −

CODE: off-tool001

Bultaco Flywheel Puller/Extractor Tool - Femsa Ignition - M33 x 1.5mm Right Hand Thread

£9.95 (£11.94 inc VAT)

OEM: 11.32-015

Bultaco Flywheel Puller/Extractor Tool - Femsa Ignition - M33 x 1.5mm Right Hand Thread Suitable for all Bultaco models fitted with Femsa ignition plus...

Quantity:

+ −

CODE: lckwire2

Safety Locking Wire 0.7mm

£5.95 (£7.14 inc VAT)

Safety Locking Wire Coil of Lock Wire 0.7mm, approx 30m length. For locking and securing fasteners.

Quantity:

+ −

CODE: bear-kit366

17 Piece Aluminium Bearing Race Seal Bush Driver Set

£17.95 (£21.54 inc VAT)

17 Piece Aluminium Bearing Race Seal Bush Driver Set This kit makes it very easy to insert wheel bearing races and seals without causing damage to the...

Quantity:

+ −

CODE: tool6019

Triumph/Norton/BSA Crankshaft Pinion Extractor Puller Tool

£62.95 (£75.54 inc VAT)

OEM: 61-6019, 06-7524, A121

Triumph/Norton/BSA Crankshaft Pinion Extractor Puller Tool Three jaws that lock at the bottom of the gear to extract it. Will pull the crankshaft...

Quantity:

+ −

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Spanners & Tools

Account Details

Quick Links

Feked.com

Feked Online