Workshop :: Spanners & Tools

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

Home/Workshop/Spanners & Tools

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Country

State/Province

City

Zip/postal code

Get rates

Spanners & Tools

CODE: timingdisc-T13

Engine Timing Disc - Degrees of crankshaft rotation

£2.99 (£3.59 inc VAT)

Engine Timing Disc - Degrees of crankshaft rotation A must for the tool box of any motorcycle enthusiast. To help set up ignition timing, or camshaft...

Quantity:

+ −

CODE: tool1861c

Triumph/BSA Clutch Centre Puller - 1" x 20TPI - Twins

£10.95 (£13.14 inc VAT)

OEM: 60-1861, 61-7014, DA50/1, 61-3766, D1861

Triumph/BSA Clutch Centre Puller - 1" x 20TPI - Twins Pulls the clutch hub from the taper on the main shaft. Fits BSA twin cylinder models, A50/A65...

Quantity:

+ −

CODE: tool3170

Clutch Spring Adjustment Tool - Triumph, BSA

£10.95 (£13.14 inc VAT)

OEM: 61-3170, 61-3700

Clutch Spring adjustment Tool. Measures aproximately 3". For Triumph and BSA models. Helps to adjust the clutch pressure plate springs. OEM: 61-3170,...

Quantity:

+ −

Top Dead Centre Timing Tool Fits 14mm Spark Plug Hole

CODE: tool024-T13

TDC Timing Tool

£13.95 (£16.74 inc VAT)

Top Dead Centre Timing Tool Fits 14mm Spark Plug Hole. The scaled measurements are in mm. Simply remove the spark plug and screw in the tool, resting the...

Quantity:

+ −

CODE: tool7019H

Triumph Rocker Spindle O Ring Guide Tool - All Pre Unit + Unit 650/750cc Models

£3.95 (£4.74 inc VAT)

OEM: 61-7019

Triumph Rocker Spindle O Ring Guide Tool - All Pre Unit + Unit 650/750cc Models Can be used on all pre-unit models + 650/750cc twins + 750cc triples....

Quantity:

+ −

CODE: thread-gauge

Screw Thread pitch Gauge - Imperial & Metric

£5.45 (£6.54 inc VAT)

Screw Thread pitch Gauge - Imperial & Metric 0.25 - 6mm 4 - 62BSW 52 leaves of measurement variations Useful tool to check the thread TPI on your nuts...

Quantity:

+ −

CODE: tool3760

Triumph / BSA Clutch Locking Plate Tool - 3 or 4 Spring Clutch

£9.95 (£11.94 inc VAT)

OEM: 61-3760

Triumph / BSA Clutch Locking Plate Tool - 3 or 4 Spring Clutch Correct tool to lock up the clutch when you want to remove the flywheel nuts or clutch...

Quantity:

+ −

CODE: fkwhitw-01

Whitworth Combination Spanners - 8 Piece

£18.50 (£22.20 inc VAT)

Whitworth Combination Spanners Set of 8 Spanners, open end and ring 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16

Quantity:

+ −

CODE: tool509

Triumph Rocker Box Inspection Cap Removal Tool - Unit Twins Circa 1959-72

£15.95 (£19.14 inc VAT)

Triumph Rocker Box Inspection Cap Removal Tool - Unit Twins Circa 1959-72 Can be used on cross slotted type rocker box caps, as used on various models...

Quantity:

+ −

CODE: tool526

Chaincase Plug / Cap Removal and Inspection Tool - Universal Use

£7.95 (£9.54 inc VAT)

Chaincase Plug / Cap Removal and Inspection Tool - Universal Use Three way tool for the removal and inspection of slotted type chaincase plugs as used on...

Quantity:

+ −

CODE: td-tool126-T8

Whitworth BSW Tap & Die Set - 23 Piece - 1/8" to 1/2" Imperial Sizes

£22.95 (£27.54 inc VAT)

Whitworth BSW Tap & Die Set - 23 Piece - 1/8" to 1/2" Imperial Sizes Ideal for creating and repairing popular Whitworth threads. Tap wrench with...

Quantity:

+ −

61-7012, 60-2108, 60-0496, D2108, D496 - Triumph/BSA Primary Chain Adjuster Tool

CODE: tool7012

Triumph/BSA Primary Chain Adjuster Tool - Unit 350/500/650/750cc Models

£5.45 (£6.54 inc VAT)

OEM: 61-7012, 60-2108, 60-0496, D2108, D496

Triumph/BSA Primary Chain Adjuster Tool - Unit 350/500/650/750cc Models Primary chain tensioner screwdriver for use on many unit Triumph and BSA single...

Quantity:

+ −

CODE: tool9114

BSA Pushrod Locating and Alignment Comb/Tool - A10, A7

£2.45 (£2.94 inc VAT)

OEM: 67-9114

BSA Pushrod Locating and Alignment Comb/Tool - A10, A7 The correct tool for use on BSA 500/650cc twins OEM: 67-9114

Quantity:

+ −

CODE: tool505

Tappet Adjustment tool - Norton, BSA, Triumph - 5/16" Tappet Screws

£13.95 (£16.74 inc VAT)

Tappet Adjustment tool - Norton, BSA, Triumph - 5/16" Tappet Screws Makes valve adjusting easier. Fits most Triumph 500/650/750 twins circa 1950-1970....

Quantity:

+ −

CODE: rimprotect-T14

Wheel Rim Protectors

£5.95 (£7.14 inc VAT)

Wheel Rim Protectors For tyre changing, used to protect the rims from damage with the tyre levers. Supplied as a Pair, with connecing cord.

Quantity:

+ −

Save 12%

CODE: spn099

8 Piece Set 1/2" Drive Whitworth Sockets

£16.95 £14.95 (£17.94 inc VAT)

8 Piece Set 1/2" Drive Whitworth Sockets Set contents 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8 Whitworth. Whitworth tool, socket tools, half inch drive.

Quantity:

+ −

CODE: tool2213

Triumph Cam Pinion/Gear Extractor and Fitting Tool - 350/500/650cc Unit and Pre Unit Twins

£52.95 (£63.54 inc VAT)

OEM: 60-2213, D2213, Z89, Z144, Z145

Triumph Cam Pinion/Gear Extractor and Fitting Tool - 350/500/650cc Unit and Pre Unit Twins For the effective removal and installation of exhaust and...

Quantity:

+ −

CODE: tool0220

Triumph Combination Fork Spanner - Pre Unit + 500/650cc Unit Models - Circa 1950-68

£12.95 (£15.54 inc VAT)

OEM: 60-0220, D220

Triumph Combination Fork Spanner - Pre Unit + 500/650cc Unit Models - Circa 1950-68 Double ended fork stanchion top nut, bottom damper nut and oil seal...

Quantity:

+ −

CODE: td-tool098-T8

BSF Tap and Die Set - 20 Piece Set - 3/16" to 1/2" British Standard Fine Thread

£19.95 (£23.94 inc VAT)

BSF Tap and Die Set - 20 Piece Set - 3/16" to 1/2" British Standard Fine Thread Ideal for threading and repairing many popular BSF threads. Tap wrench...

Quantity:

+ −

CODE: td-tool103-T8

UNC UNF Tap & Die Set - 24 Piece - 1/16" to 1/2" Imperial Sizes

£19.95 (£23.94 inc VAT)

UNC UNF Tap & Die Set - 24 Piece - 1/16" to 1/2" Imperial Sizes Ideal for creating and repairing popular UNF and UNC threads. Tap wrench with...

Quantity:

+ −

CODE: tool533M

Fork Seal Holder Remover Tool - 61-6017

£29.95 (£35.94 inc VAT)

OEM: 61-6017

Fork Seal Holder Remover Tool - 61-6017 Universal fork seal removal tool with threaded holes. Powder coated. Perfect to loosen off the seal holders on...

Quantity:

+ −

CODE: tool223

Triumph Open Square Type Tappet Adjustment Spanner

£3.95 (£4.74 inc VAT)

OEM: 60-2184, D2184

Triumph Open Square Type Tappet Adjustment Spanner Fits all square tappet adjusters Holds tappet adjuster while you tighten locknut OEM: 60-2184,...

Quantity:

+ −

60-0527, D527 - Triumph Lower Fork Bush/Bearing Nut Removal Tool - Pre Unit and Unit Twins

CODE: tool577

Triumph Lower Fork Bush/Bearing Nut Removal Tool - Unit 500/650/750cc Twins and Triples

£7.45 (£8.94 inc VAT)

OEM: 60-0527, D527

Triumph Lower Fork Bush/Bearing Nut Removal Tool - Pre Unit and Unit Twins Tool with four tabs to remove and install the lower fork bearing nuts....

Quantity:

+ −

CODE: punch104-T5

Gasket Hole Punch Set - Paper & Cork - 12 Piece from 3mm to 19mm

£8.95 (£10.74 inc VAT)

Gasket Hole Punch Set - Paper & Cork - 12 Piece from 3mm to 19mm Heat treated, high quality carbon steel with k nurled bodies for a secure grip....

Quantity:

+ −

1 2 3 4 5 6

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Spanners & Tools

Account Details

Quick Links

Feked.com

Feked Online