Frame Parts :: Swing Arm Bush & Pin

CODE: nut-2BA-B14

2BA Nut - Triumph Swinging Arm Spindle Rod + Various Uses

£0.45 (£0.54 inc VAT)

OEM: 82-4717, F4717, 82-3799, F3799, 21-5161, S5161

2BA Nut - Triumph Swinging Arm Spindle Rod + Various Uses Locknut for swinging arm end cap retaining pin - correct fitment on: Pre unit 5T, T100, TR5,...

Quantity:

+ −

40-4217, 82-4385, 82-4386 - Triumph/BSA Swinging Arm Spindle Shim Set

CODE: shim4385-C3

Triumph/BSA Swinging Arm Spindle Shim Set - Bantam Models + C15, B40, T20 & Unit 350/500

£6.95 (£8.34 inc VAT)

OEM: 40-4217, 82-4385, 82-4386, F4385, F4386

Triumph/BSA Swinging Arm Spindle Shim Set - Bantam Models + C15, B40, T20 & Unit 350/500 D7, D10, D14, B175, C15, B40 + Triumph T20 and Unit...

Quantity:

+ −

CODE: swing4076-C3

Triumph/BSA Swinging Arm Bush - Bantam, Tiger Cub and Unit 350/500cc Models

£6.45 (£7.74 inc VAT)

OEM: 40-4209, 82-4076, F4076

Triumph/BSA Swinging Arm Bush - Bantam, Tiger Cub and Unit 350/500cc Models Correct fitment on the following bikes: BSA Bantam D7, D10, D14 models + C15,...

Quantity:

+ −

CODE: swing7270-C3

Triumph Swinging Arm Spindle Rubber Gaiter - Later Unit 350/500cc Models Circa 1967-74

£2.45 (£2.94 inc VAT)

OEM: 82-7270, F7270

Triumph Swinging Arm Spindle Rubber Gaiter - Later Unit 350/500cc Models Circa 1967-74 Correct fitment on later T90 and T100 models from 1967 onwards....

Quantity:

+ −

CODE: swing4087-C3

Triumph/BSA Swinging Arm Bolt - Bantam, C15, B40 + Tiger Cub Models

£3.95 (£4.74 inc VAT)

OEM: 40-4249, 42-4216, 90-3218, 82-4087, F4087

Triumph/BSA Swinging Arm Bolt - Bantam, C15, B40 + Tiger Cub Models With threaded centre for grease nipple. Correct fitment on the following bikes: BSA...

Quantity:

+ −

CODE: swing0118-C4

Triumph/BSA Swinging Arm Spindle Set - Unit OIF 650/750cc Twins Circa 1971-87

£29.95 (£35.94 inc VAT)

OEM: 83-2691, F12691, 83-2692, F12692, 83-2521, F12521

Triumph/BSA Swinging Arm Spindle Set - Unit OIF 650/750cc Twins Circa 1971-87 Complete swinging arm spindle set including bobbins, split bushes and...

Quantity:

+ −

CODE: wash2266-C3

Triumph Rear Wheel Spindle / Swinging Arm Pivot Washer - OIF 650/750cc Twins Circa 1971-85

£0.95 (£1.14 inc VAT)

OEM: 83-2266, F12266

Triumph Rear Wheel Spindle / Swinging Arm Pivot Washer - OIF 650/750cc Twins Circa 1971-85 Flat washer for use on both the rear wheel spindle and...

Quantity:

+ −

CODE: nut0594-B18

Triumph Gearbox Mainshaft Nut/Swing Arm Pin Nut - 21-0594, 21-0545

£2.45 (£2.94 inc VAT)

OEM: 21-0594, S594, 21-0545, S545

Triumph Gearbox Mainshaft Nut/Swing Arm Pin Nut - 21-0594, 21-0545 Triumph gearbox mainshaft nut - OR - Swing arm pin nut Suits some Triumph 500/650cc and...

Quantity:

+ −

CODE: off-swpin001

Triumph Tiger Cub / BSA Bantam Silent Block Conversion Kit for Standard Swinging Arm

£59.95 (£71.94 inc VAT)

Triumph Tiger Cub / BSA Bantam Silent Block Conversion Kit for Standard Swinging Arm Designed in association with Sammy Miller, this silent block...

Quantity:

+ −

82-5944, F5944 - Swinging Arm Pin Tab Washer - Triumph

CODE: swingwasher5944-C3

Swinging Arm Pin Tab Washer - Triumph - 82-5944

£1.95 (£2.34 inc VAT)

OEM: 82-5944, F5944

Swinging Arm Pin Tab Washer - Triumph - 82-5944 Swinging arm pin tab washer, or lock washer, to secure the swing arm pin nut. OEM: 82-5944, F5944

Quantity:

+ −

CODE: swing4362-pair-C3

BSA Swinging Arm Bushes - Large Bore - 42-4362

£66.95 (£80.34 inc VAT)

OEM: 42-4362

BSA Swinging Arm Bushes - Large Bore Pair of large bore silent block metalastic swinging arm bushes - A7, A10 and B group models. Approximate bore size:...

Quantity:

+ −

CODE: swing7343-C3

Triumph Swinging Arm Pivot Bolt Tab Washer - Unit 350/500cc Models Circa 1967-74

£1.45 (£1.74 inc VAT)

OEM: 82-7343, F7343

Triumph Swinging Arm Pivot Bolt Tab Washer - Unit 350/500cc Models Circa 1967-74 Two required per bike - locates between the pivot bolts and the rubber...

Quantity:

+ −

CODE: fkswing184-C4

Triumph/BSA Swinging Arm Pin - Bantam and Tiger Cub Models

£27.95 (£33.54 inc VAT)

OEM: 90-4312, 82-4079

Triumph/BSA Swinging Arm Pin - Bantam and Tiger Cub Models Correct fitment on Bantam D7, D10, D14 models + Triumph T20 Cub. Fine Thread - 26 TPI spindle....

Quantity:

+ −

CODE: nut4343-C3

Swinging Arm Spindle Nut - BSA - 42-4343

£4.95 (£5.94 inc VAT)

OEM: 42-4343

Swinging Arm Spindle Nut - BSA - 42-4343 BSA A&B Group Hollow spindle for cross over brake models. Fits A50/A65 pre 1969 models Fits BSA A10, BSA...

Quantity:

+ −

CODE: fkswing355-C4

BSA Swinging Arm Spindle - Hollow Type

£21.95 (£26.34 inc VAT)

OEM: 42-4340

BSA Swinging Arm Spindle - Hollow Type BSA A&B Group Hollow spindle for cross over brake models. Fits A50/A65 pre 1969 models Fits BSA A10, BSA A7...

Quantity:

+ −

CODE: swing2087-C4

Triumph/BSA Swinging Arm Pivot Bolt - OIF 650/750cc Twins Circa 1971-85

£13.95 (£16.74 inc VAT)

OEM: 21-2087, S2087

Triumph/BSA Swinging Arm Pivot Bolt - OIF 650/750cc Twins Circa 1971-85 Swinging arm pivot stud and bolt assembly. Correct fitment on all oil in frame...

Quantity:

+ −

CODE: bear2245-C3

Triumph/BSA Swinging Arm Bearing - B25, B50 and TR25W and TR5T Models

£4.95 (£5.94 inc VAT)

OEM: 83-2245, F2245

Triumph/BSA Swinging Arm Bearing - B25, B50 and TR25W and TR5T Models Needle roller swinging arm bearing - two required per bike. OD: 1+1/4" (31.8mm)...

Quantity:

+ −

CODE: swing2692-C3

Triumph/BSA Swinging Arm Pivot Dirt Excluder - Unit OIF 650/750cc Twins Circa 1971-87

£1.45 (£1.74 inc VAT)

OEM: 83-2692, F12692

Triumph/BSA Swinging Arm Pivot Dirt Excluder - Unit OIF 650/750cc Twins Circa 1971-87 Rubber dust seal - locates each end of the swinging arm spindle...

Quantity:

+ −

CODE: swing0119-C4

Triumph Swinging Arm Spindle Set - Early Unit 350/500cc Models Circa 1958-66

£21.95 (£26.34 inc VAT)

OEM: 82-4076, F4076, 82-4196, F4196, 82-4195, F4195

Triumph Swinging Arm Spindle Set - Early Unit 350/500cc Models Circa 1958-66 Complete swinging arm spindle set including pin, pivot bushes and caps....

Quantity:

+ −

CODE: seal2244-C3

Triumph/BSA Swinging Arm Pivot Oil Seal - B25, B50 and TR25W and TR5T Models

£4.45 (£5.34 inc VAT)

OEM: 83-2244, F2244

Triumph/BSA Swinging Arm Pivot Oil Seal - B25, B50 and TR25W and TR5T Models Two required per bike - OIF models from 1971 onwards. OD: 3" (31.9mm) ID:...

Quantity:

+ −

CODE: swing3798-C3

Triumph Swinging Arm Spindle End Cap - Pre Unit 500/650cc + Unit 350/500cc Models - Circa 1954-66

£1.95 (£2.34 inc VAT)

OEM: 82-3798, F3798

Triumph Swinging Arm Spindle End Cap - Pre Unit 500/650cc + Unit 350/500cc Models - Circa 1954-66 Swinging arm end cap - correct fitment on: Pre unit 5T,...

Quantity:

+ −

CODE: fkswing355-S-C4

BSA Solid Type Swinging Arm Spindle - A and B Group Models Circa 1954-57

£18.95 (£22.74 inc VAT)

OEM: 42-4112

BSA Solid Type Swinging Arm Spindle - A and B Group Models Circa 1954-57 Solid swinging arm spindle - correct fitment on A7, A10, B31, B32, B33 and B34...

Quantity:

+ −

CODE: shim3683-C3

Triumph Swinging Arm Spindle Shim Set - All Pre-Unit Models

£4.95 (£5.94 inc VAT)

OEM: 82-3683, 82-3684, F3683, F3684

Triumph Swinging Arm Spindle Shim Set - All Pre-Unit Models To fit 5T, 6T, TR5, T100, T110 and T120 pre unit models with swinging arm. Set of 4 shims:...

Quantity:

+ −

CODE: swing2690-C3

Triumph/BSA Swinging Arm Pivot RH Distance Piece - OIF 650/750cc Twins Circa 1971-85

£1.25 (£1.50 inc VAT)

OEM: 83-2690, F12690

Triumph/BSA Swinging Arm Pivot RH Distance Piece - OIF 650/750cc Twins Circa 1971-85 Swinging arm pivot right hand spacer / thick washer. Correct fitment...

Quantity:

+ −

CODE: fkswing256-C4

Swinging Arm Pin - BSA

£29.95 (£35.94 inc VAT)

OEM: 40-4215

SWINGING ARM PIN - BSA BSA C15, B40 Early Models Fine thread 26 tpi swinging arm spindle Made in England OEM: 40-4215

Quantity:

+ −

CODE: swing3797-C3

Triumph Swinging Arm Spindle Rod - Pre Unit 500/650cc + Unit 350/500cc Models - Circa 1954-66

£2.45 (£2.94 inc VAT)

OEM: 82-3797, F3797

Triumph Swinging Arm Spindle Rod - Pre Unit 500/650cc + Unit 350/500cc Models - Circa 1954-66 Swinging arm end cap retaining pin - correct fitment on:...

Quantity:

+ −

CODE: swing8090-C3

Triumph Swinging Arm Bobbin O Ring - Unit 650cc Twins + Trident Models Circa 1968-75

£0.95 (£1.14 inc VAT)

OEM: 82-8090, F8090

Triumph Swinging Arm Bobbin O Ring - Unit 650cc Twins + Trident Models Circa 1968-75 Rubber O ring seal - locates between the bobbin and oil seal...

Quantity:

+ −

CODE: swing0120-C4

Triumph Swinging Arm Spindle Set - Later Unit 350/500cc Models Circa 1967-74

£35.95 (£43.14 inc VAT)

OEM: 82-7342, F7342, 82-7343, F7343, 82-4076, F4076

Triumph Swinging Arm Spindle Set - Later Unit 350/500cc Models Circa 1967-74 Complete swinging arm spindle set including pin, pivot bushes and tab...

Quantity:

+ −

CODE: swing7848-C3

Triumph/BSA Swinging Arm Flanged Washer / O Ring Housing - 650cc Twins + Trident Models Circa 1968-75

£4.95 (£5.94 inc VAT)

OEM: 82-7848, F7848

Triumph/BSA Swinging Arm Flanged Washer / O Ring Housing - 650cc Twins + Trident Models Circa 1968-75 Swinging arm pivot oil seal housing - locates on...

Quantity:

+ −

CODE: swing2689-C3

Triumph/BSA Swinging Arm Pivot LH Distance Piece - OIF 650/750cc Twins Circa 1971-85

£2.45 (£2.94 inc VAT)

OEM: 83-2689, F12689

Triumph/BSA Swinging Arm Pivot LH Distance Piece - OIF 650/750cc Twins Circa 1971-85 Swinging arm pivot left hand spacer / thick washer. Correct fitment...

Quantity:

+ −

CODE: nut4116-C3

BSA Solid Type Swinging Arm Spindle Nut - A and B Group Models Circa 1954-57

£2.95 (£3.54 inc VAT)

OEM: 42-4116

BSA Solid Type Swinging Arm Spindle Nut - A and B Group Models Circa 1954-57 Solid swinging arm spindle standard nut - correct fitment on A7, A10, B31,...

Quantity:

+ −

CODE: wash3574-C3

Triumph Swinging Arm Spindle Spacer Washer - Pre-Unit Models Circa 1954-62

£0.75 (£0.90 inc VAT)

OEM: 82-3574, F3574

Triumph Swinging Arm Spindle Spacer Washer - Pre-Unit Models Circa 1954-62 Locates over the swinging arm spindle and used in conjunction with the shims...

Quantity:

+ −

CODE: swing4115-pair-C3

BSA Swinging Arm Bushes - Small Bore - 42-4115

£59.95 (£71.94 inc VAT)

OEM: 42-4115

BSA Swinging Arm Bushes - Small Bore Pair of small bore silent block metalastic swinging arm bushes - A7, A10 and B group models. Approximate bore size:...

Quantity:

+ −

CODE: swing0620-C4

Swing Arm Pin - Triumph - 21-0620

£15.95 (£19.14 inc VAT)

OEM: 21-0620, S620, 21-0591, S591

Swing Arm Pin - Triumph - 21-0620 Fits many of the Triumph Models Can be used for 21-0591, S591 as well. OEM: 21-0620, S620

Quantity:

+ −

CODE: swing5313-C3

Triumph Swinging Arm Distance Tube - Unit 650cc Twins + Trident Models Circa 1963-76

£2.95 (£3.54 inc VAT)

OEM: 82-5313, F5313

Triumph Swinging Arm Distance Tube - Unit 650cc Twins + Trident Models Circa 1963-76 Swinging arm spacer tube - locates over the swinging arm pin between...

Quantity:

+ −

CODE: swing6821-C3

Swinging Arm Bobbin - Triumph 650cc Unit Twins and T150/T160 + BSA A50/A65 Models

£8.45 (£10.14 inc VAT)

OEM: 82-6821, F6821

Swinging Arm Bobbin - Triumph 650cc Unit Twins and T150/T160 + BSA A50/A65 Models Swinging arm bearing sleeve with lubrication grease channel - two...

Quantity:

+ −

CODE: swing4509-C3

Triumph Swinging Arm Pivot Bolt - Tiger Cub Models Circa 1959-65

£1.95 (£2.34 inc VAT)

OEM: 82-4509, F4509

Triumph Swinging Arm Pivot Bolt - Tiger Cub Models Circa 1959-65 With threaded centre for grease nipple - locates between the swinging arm bracket and...

Quantity:

+ −

CODE: swing-bush049-C3

Norton Commando Swinging Arm Bearing / Bush - 750/850cc MK1 and MK2 Models - Circa 1969-74

£6.95 (£8.34 inc VAT)

OEM: 06-0447, 06.0447

Norton Commando Swinging Arm Bearing / Bush - 750/850cc MK1 and MK2 Models - Circa 1969-74 Oilite flanged swinging arm pivot bush - correct fitment on pre...

Quantity:

+ −

CODE: swing4195-C4

Triumph Swinging Arm Pin - Unit 350/500cc Twins Circa 1957-66

£14.95 (£17.94 inc VAT)

OEM: 82-4195, F4195

Triumph Swinging Arm Pin - Unit 350/500cc Twins Circa 1957-66 Correct fitment on all 350 and 500cc unit twins inclusing 3TA, 5TA, T90, T100 from...

Quantity:

+ −

CODE: tenpart3556-C3

Triumph/BSA Chain Adjuster Snail Cam - B25, B50 and TR25W and TR5T Models

£3.95 (£4.74 inc VAT)

OEM: 83-3556, F3556

Triumph/BSA Chain Adjuster Snail Cam - B25, B50 and TR25W and TR5T Models Swinging arm pivot/rear chain tensioner plate as fitted to OIF models from 1971...

Quantity:

+ −

CODE: swing4349-C4

BSA Swinging Arm Rear Brake Pedal Crossover Shaft / Spindle - A and B Group Models + Early A50/A65

£21.95 (£26.34 inc VAT)

OEM: 42-4349

BSA Swinging Arm Rear Brake Pedal Crossover Shaft / Spindle - A and B Group Models + Early A50/A65 Splined shaft - locates in the hollow swinging arm...

Quantity:

+ −

CODE: swing6150-C4

Triumph Swinging Arm Spindle - 650cc Unit Twins from 1963-66

£16.95 (£20.34 inc VAT)

OEM: 82-6150, F6150

Triumph Swinging Arm Spindle - 650cc Unit Twins from 1963-66 CEI thread. Length: UH 8+5/8" (21.9cm) Spindle Diameter: 9/16" (14.2mm) OEM: 82-6150, F6150

Quantity:

+ −

82-3690, F3690 - Swinging Arm Bush - Triumph - 500/650cc Pre-Unit Models

CODE: swing3690-C3

Swinging Arm Bush - Triumph - 500/650cc Pre-Unit Models Circa 1954-62

£6.45 (£7.74 inc VAT)

OEM: 82-3690, F3690

Swinging Arm Bush - Triumph - 500/650cc Pre-Unit Models Swing arm pivot bush to fit pre unit 5T, 6T, TR5, T100, T110, T120, TR6 models. Length: 1"...

Quantity:

+ −

CODE: swing7342-C4

Triumph Swinging Arm Spindle - Later Unit 350/500cc Models Circa 1967-74

£27.95 (£33.54 inc VAT)

OEM: 82-7342, F7342

Triumph Swinging Arm Spindle - Later Unit 350/500cc Models Circa 1967-74 Correct fitment on later T90 and T100 models. Length: 8+11/16" (22cm) OD:...

Quantity:

+ −

83-2691, F12691 - riumph/BSA Swinging Arm Pivot Sleeve / Bobbin - Unit OIF 650/750cc Twins Circa 1971-87

CODE: swing2691-C3

Triumph/BSA Swinging Arm Pivot Sleeve / Bobbin - Unit OIF 650/750cc Twins Circa 1971-87

£8.95 (£10.74 inc VAT)

OEM: 83-2691, F12691

Triumph/BSA Swinging Arm Pivot Sleeve / Bobbin - Unit OIF 650/750cc Twins Circa 1971-87 Suitable for all 650cc and 750cc unit twins from 1971 onwards -...

Quantity:

+ −

CODE: fkswing050-C3

Swinging Arm Pin Bush - BSA / Triumph

£3.95 (£4.74 inc VAT)

OEM: 83-2521, F12521

SWINGING ARM PIN BUSH - BSA / Triumph Swinging arm pin bush for BSA A65 Oil In Frame OIF (1971-72) and Triumph TR6, T120 (1971-74), TR7, T140...

Quantity:

+ −

CODE: fkswing411-C4

BSA / Triumph Swinging Arm Bush - A75 Rocket 3 + X75 Hurricane Models

£6.95 (£8.34 inc VAT)

OEM: 82-8475

BSA / Triumph Swinging Arm Bush - A75 Rocket 3 + X75 Hurricane Models Correct fitment on BSA A75 Rocket 3 MK1 and MK2 models circa 1969-72 + Triumph X75...

Quantity:

+ −

CODE: swing5053

Swinging Arm Pin - Norton Commando - 850cc MK2A Models

£19.95 (£23.94 inc VAT)

OEM: 06-5053, 065053

Swinging Arm Pin - Norton Commando - 850cc MK2A Models This is the stock spindle for the MK2A model which only requires the centre bolt hole, therefore...

Quantity:

+ −

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Swing Arm Bush & Pin

Bestsellers Bestsellers

Account Details

Quick Links

Feked.com

Feked Online