.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Oil Feed Pipes

oring727H
£0.95 (£1.14 inc VAT)
OEM: 60-3548, 70-3253, E3253
Rocker spindle O Ring for Triumph 200, 350, 500, 650 and 750cc models This o-ring is the little sucker that you replace to stop that oil leak from the...

anti-sump-tap-switch-mag
£54.65 (£65.58 inc VAT)
Anti Wet Sump Oil Pipe Tap With Switch - Magneto or Coil Ignition Systems A solution to a frequent problem of wet sumping. On many of the older classic...
 

washer1335
£0.95 (£1.14 inc VAT)
OEM: 70-1335, E1335, 40-0159, 40-159
Triumph Copper Washer - Overhead Rocker Spindle / Timing Cover Plug Also used for the T140 oil in frame sump washer. OEM: 70-1335, E1335,  40-0159,...
+

oil-tap3-B3
£15.95 (£19.14 inc VAT)
Wet Sumping, Anti Sump, Oil Pipe Tap A solution to a frequent problem of wet-sumping. On many of the older classic bikes, the oil pump and/or...
+

nut056H-B18
£3.95 (£4.74 inc VAT)
OEM: 70-1435
Triumph T120, TR6 etc Rocker spindle domed nut, as used on all Triumph 500,600cc twins up to (-1968). OEM: 70-1435
+

wash1575-B13
£0.75 (£0.90 inc VAT)
OEM: 70-1575, 40-0158, E1575, 40-158
Triumph/BSA Rocker Spindle Thrust Washer - Various Models As used on many BSA models including A7, A10,  A50, A65, B25, B44, B40 and C15. Plus...
+

pipe3655-F3
£3.95 (£4.74 inc VAT)
OEM: 82-3655, 82-3182, F3655, F3182
Triumph Oil Filter Union Nut and Connector Pipe - Pre Unit and Unit Models - 1954 Onwards Pipe locates between the rubber oil feed pipe and the oil...
+

nut0400-B18
£1.95 (£2.34 inc VAT)
OEM: 97-0400, H400
Triumph Rocker Oil Feed Domed Nut - Unit 350/500cc Models Circa 1959-71 + T20 Tiger Cub Rocker oil feed line acorn nut - correct fitment on 3TA, 5TA, T90...
+

wash1574-B13
£1.45 (£1.74 inc VAT)
OEM: 70-1574, E1574, 67-0062, 40-0156, 67-62, 40-156, 06-7698, D12/950, NM18103
Triumph/BSA/Norton Rocker Spindle Thackeray Spring Washer - Various Models Double coil spring thackeray washer - locates on the rocker spindle shaft. As...
+

pipe4159
£21.95 (£26.34 inc VAT)
OEM: 70-4159, E4159, 70-3082, E3082, 70-6349, E6349
Triumph T120/TR6, 650cc Rocker Oil Feed Pipe Available as standard or UK made - please select option. Can be used instead of 71-2428, E12428, 70-6349,...

pipe3805-224
£23.95 (£28.74 inc VAT)
OEM: 70-7576, E7576, 70-3805, E3805, 70-6351, E6351
Triumph Rocker Oil Feed Pipe - 350/500cc Unit Models - 1957 Onwards A rocker oil feed pipe and banjo assembly to fit 350/500cc unit twins. Designed to...
+

pipe551-B3
£39.95 (£47.94 inc VAT)
OEM: 42-8346, 42-8347
BSA A7, A10 armoured oil feed pipes Exact replica of genuine pipes Comes as 2 pipes, approx 17" and 18" long, ready to fit OEM: 42-8346, 42-8347
+

pipe248
£21.95 (£26.34 inc VAT)
OEM: 42-0048, 42-48
BSA A7, A10 Rocker oil feed pipe complete. Ariel Huntmaster 650cc Also BSA B31, B33 swing arm models pipe diameter: 3/16" OEM: 42-0048, 42-48
+

bolt553-B18
£3.45 (£4.14 inc VAT)
OEM: 65-0317
BSA A7, A10 Rocker spindle oil feed bolt OEM: 65-0317

nut0550-B18
£2.95 (£3.54 inc VAT)
OEM: 21-0550, S550
Triumph Rocker Oil Feed Dome Nut - 750cc Twins and Triples From 1969 Onwards Chrome plated rocker spindle / oil feed pipe domed acorn nut - correct...
+

pipe249
£21.95 (£26.34 inc VAT)
OEM: 40-0183, 40-183, 47-8397, 41-0807, 41-807
BSA Rocker Oil Feed Pipe - C15, B25, B40, B44, B50 Models A rocker oil feed pipe and banjo assembly to fit many of the BSA unit singles. Designed to be...
+

pipe308-B3
£19.95 (£23.94 inc VAT)
OEM: 71-3550
Triumph T140, TR7 rocker oil feed pipe OEM: 71-3550
+

o/feed2252-B13
£7.45 (£8.94 inc VAT)
OEM: 65-2252
BSA Crankcase Oil Pipe Union / Adaptor - A, B, C and M Group Models From 1940 Onwards Oil pipe adaptor union - from oil tank to crankcase. Correct...
+

bolt0984-B18
£2.95 (£3.54 inc VAT)
OEM: 70-0984, E984
Triumph Rocker Oil Return Banjo Adaptor Bolt - Pre-Unit Twins Correct fitment on many 500/650cc pre-unit twins from 1947 onwards Only models fitted with...
+

o/feed0308-B18
£3.45 (£4.14 inc VAT)
OEM: 76-0308, 70-8082, E8082
BSA Rocker Oil Feed Union / Adaptor - A50 and A65 Models + Unit Triumph/BSA Singles Oil pipe adaptor - correct fitment on all A50, A65, C25, B25 and...
+

pipe1547-B3
£13.45 (£16.14 inc VAT)
OEM: 65-1547, 65-1119
BSA Lower Rocker Oil Feed Pipe - Long Stroke A7, M33 + B Group Models Circa 1947-53 Correct fitment on long stroke A7, B31, B32, B33, B34 and M33 models...
+

pipeGS272W-B3
£14.95 (£17.94 inc VAT)
OEM: GS272, 70-1503, E1503, 70-0004
Triumph Rear/Inlet Rocker Box Drain Pipe - Pre-Unit 500/650cc Models - 1938-62 Inlet rocker box oil drain pipe and banjo assembly to fit all 500/650cc...
+

pipe848-B3
£39.95 (£47.94 inc VAT)
OEM: 42-8344, 42-8345
BSA B Group (B31, B32, B34) armoured oil feed and return pipes (under gearbox routing) Comes as 2 pipes, approx 20" and 21" long, ready to fit. These route...
+

bolt1601-B13
£3.45 (£4.14 inc VAT)
OEM: 70-1601, E1601
Triumph Rocker Oil Feed Banjo Adaptor Bolt - Pre-Unit Twins Correct fitment on many 500/650cc pre-unit twins from 1947 onwards Length UH: 3/4" (18.9mm)...
+

pipe8461-B3
£12.95 (£15.54 inc VAT)
OEM: 65-8461
BSA Oil Feed Pipe Banjo - Oil Tank End - B31 and B33 Rigid and Plunger Frame Models Circa 1947-57 Complete tank end oil feed pipe - correct fitment on...
+

pipe851-B3
£37.95 (£45.54 inc VAT)
OEM: 42-8422
BSA B Group (B31, B32, B34) armoured oil feed and return pipes (over gearbox routing) Comes as 2 pipes, approx 13" long, ready to fit. These route over the...
+

nut8332-B13
£1.95 (£2.34 inc VAT)
OEM: 66-8332
BSA Oil Feed Pipe Gland Nut - B, C and M Group Models Circa 1940-62 Brass oil pipe nipple / union nut for 5/16" oil feed pipe - correct fitment on rigid...
+

pipeGS273-305W-B3
£14.95 (£17.94 inc VAT)
OEM: GS273, 70-1504, E1504, 70-0005
Triumph Front Rocker Box Drain Pipe - Pre-Unit 500/650cc Models Circa 1938-62 - Imported Exhaust rocker box oil drain pipe and banjo assembly to fit all...
+

wash2594-B13
£0.75 (£0.90 inc VAT)
OEM: 70-2594, E2594
Triumph Rocker Spindle Thrust Washer - T20 Tiger Cub OD: 5/8" (15.8mm) ID: 3/8" (9.8mm) Thickness: 1/32" (0.8mm) OEM: 70-2594, E2594
+

bolt2767-B13
£2.95 (£3.54 inc VAT)
OEM: 70-2767, E2767
Triumph Rocker Drain Banjo Adaptor Bolt - 500cc Pre-Unit Twins From 1947-59 Correct fitment on 500cc pre-unit twins from 1947-59 Length UH: 3/4"...
+

pipeGS273-UK-bent-B3
£42.95 (£51.54 inc VAT)
OEM: GS273, 70-1504, E1504, 70-0005
Triumph Front Rocker Box Drain Pipe - Pre-Unit 500/650cc Models Circa 1938-62 - UK Made Exhaust rocker box oil drain pipe and banjo assembly to fit all...
+

pipeGS273-unbent-B3
£18.95 (£22.74 inc VAT)
OEM: GS273, 70-1504, E1504, 70-0005
Triumph Front Rocker Box Drain Pipe - Pre-Unit 500/650cc Models Circa 1938-62 - Unbent Exhaust rocker box oil drain pipe and banjo assembly to fit all...
+

otank3856
£132.95 (£159.54 inc VAT)
OEM: 82-3856, F3856
Triumph Oil Tank - Pre Unit 500/650cc Models Circa 1955-59 Oil tank with breather pipe located in the rear of the tank as used on 5T, TR5, 6T, T100 and...
+

pipeGS272-unbent-B3
£19.95 (£23.94 inc VAT)
OEM: GS272, 70-1503, E1503, 70-0004
Triumph Rear/Inlet Rocker Box Drain Pipe - Pre-Unit 500/650cc Models Circa 1938-62 - Unbent Inlet rocker box oil drain pipe and banjo assembly to fit all...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.