.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Bolts & Nuts

nut1302-B14
£0.95 (£1.14 inc VAT)
OEM: 14-1302, 21-1852, S1852
5/16" UNF Self-Locking Cleveloc Nut - Thin Type 5/16" UNF self-locking Cleveloc nut. Thin Type - 24TPI OEM: 14-1302, 21-1852, S1852
+

nut1303-B14
£1.45 (£1.74 inc VAT)
OEM: 14-1303, 06-3024
3/8" UNF Self-Locking Cleveloc Nut - Thin Type 3/8" UNF self-locking Cleveloc nut. Thin Type - 24TPI OEM: 14-1303, 06-3024
+

nut036-B14
£0.75 (£0.90 inc VAT)
OEM: P0172A, S1-52, 21-7052, PO172A, PO-172A, 02-0046
Triumph Twin - Cylinder Base Nut - P0172A Also to secure top head stay to engine. 3/8" CEI OEM: P0172A, S1-52, PO172A, PO-172A, 02-0046
+

wash2330
£0.25 (£0.30 inc VAT)
OEM: 60-2330, 60-4247, 54-0055, D4247, D2330
5/16" Plain Washer - Thin Type  - 1/16" Thickness ID: 1/2" (12.8mm) OD: 5/8" (15.7mm) Thickness: 1/16", 0.05" (1.2mm) OEM: 60-2330, 60-4247, 54-0055,...
+

bolt7354-B13
£0.75 (£0.90 inc VAT)
OEM: 70-7354, E7354
BSA/Triumph Timing Points Cover Countersunk Screw - Various Models Posi-drive screw to fix the points cover on various unit models. 2BA x 1/2" UH Made...
+

wash3887
£0.45 (£0.54 inc VAT)
OEM: 70-3887, E3887
Triumph Oil Pump Mounting Serrated Washer - Conical Type - 350/500/650/750cc Unit Twins Correct for all unit twins - 3TA, 5TA, T90, T100, 6T, TR6, T120,...
+

nut1310-B14
£1.75 (£2.10 inc VAT)
OEM: 70-1310, E1310, 82-1008, F1008
Triumph Nut - 5/16" x 26TPI - Oil Block to Crankcase Unit Twins + Other Uses 5/16" x 26TPI  small hexagon thin wall nut. OEM: 70-1310, E1310,  82-1008,...
+

key1580-B13
£1.95 (£2.34 inc VAT)
OEM: 70-1580, E1580, 35-1896, 41-0560, 41-560, 15-0040
Triumph / BSA Crankshaft Timing Pinion Woodruff Key - Pre-Unit & Unit Models Locates the crankshaft pinion on the timing side to the crankshaft. Used...
+

nut115H-B14
£1.95 (£2.34 inc VAT)
OEM: 21-0692
Triumph Cylinder Base Nut for T120, T140 models (1969-). 12 point multi sided. 3/8" UNF. Also fits some BSA A65 models. OEM: 21-0692
+

nut3955-B14
£0.65 (£0.78 inc VAT)
OEM: 82-3955, F3955
3/8" CEI Self-Locking Nyloc Nut 3/8" CEI self-locking nyloc nut. deep type - 26TPI OEM: 82-3955, F3955
+

dowel8751-B13
£1.95 (£2.34 inc VAT)
OEM: 70-8751, 70-1534, E8751, E1534
Triumph Cylinder Base / Crankcase Halves Hollow Dowel - Pre Unit and Unit Twins and Triples Stud to crankcase hollow dowel as used on various models...
+

nut-DS47-B14
£1.75 (£2.10 inc VAT)
OEM: DS47, DS-47
7/16" x 26 CEI Half Nut - Various Uses on Pre Unit Triumph Models Used extensively on many frame, bolts and stud fixing points. Gearbox mounting,...
+

nut057H-B18
£2.75 (£3.30 inc VAT)
OEM: 21-0544, S544
Triumph T120, T140 Primary Chaincase Dome Head Nut - 21-0544 UNF Dome Head Nut 5/16" (Chrome plated) OEM: 21-0544, S544
+

key1558-B13
£2.45 (£2.94 inc VAT)
OEM: 70-1558, E1558
Triumph Camshaft Pinion Woodruff Key - Pre-Unit & Unit Twins Locates the camshaft pinion to the camshaft - both inlet and exhaust. Length: 5/16"...
+

nut-DS48-B14
£1.95 (£2.34 inc VAT)
OEM: DS48, DS-48, 02-0052, 99-3557, 15-5753
1/2" x 20 CEI Standard Nut - Various Uses on BSA, Triumph and AMC Models Used extensively on many frame, bolts and stud fixing points. Gearbox mounting,...
+

wash1612
£0.15 (£0.18 inc VAT)
OEM: 70-1612, E1612, 70-2312, E2312
Triumph 1/4" Serrated Lock Washer - Flat Type - Various Uses on Pre Unit and Unit Models Shakeproof serrated washer as used to secure bolts - engine,...
+

domenut1531-B13
£2.95 (£3.54 inc VAT)
OEM: 97-1531, H1531
Triumph Primary and Gearbox Cover Dome Nut - Unit 650cc Models Circa 1963-68 Chrome plated acorn nut used to secure both the primary chaincase cover and...
+

pillarbolt7680-B13
£1.95 (£2.34 inc VAT)
OEM: 70-7680, E7680
Triumph/BSA Contact Breaker Pillar Bolt - Various Models To secure the contact points set on side points models, also secures the points cover. Correct...
+

wash0644-B18
£1.25 (£1.50 inc VAT)
OEM: 67-0644, 67-644
BSA Crankshaft Gear Side Tab Washer - A50, A65, A7 and A10 Models - 1947 Onwards Half time pinion lockwasher as used on all A50 and A65 models from...
+

stud3114-B19
£2.95 (£3.54 inc VAT)
OEM: 70-3114, E3114
Triumph Crankshaft / Rotor Mounting Stud - Pre Unit and Unit Models Circa 1959-73 Drive side crankshaft to alternator rotor stud - later pre unit...
+

nut2412-B14
£1.45 (£1.74 inc VAT)
OEM: 70-2412, E2412
Fork Leg & Cylinder Base Nut - Triumph - 70-2412 For various Triumphs Premium Quality - Made in England OEM: 70-2412, E2412
+

bolt749-B14
£23.95 (£28.74 inc VAT)
OEM: E3794, E3795, E4456, 70-3794, 70-3795, 70-4456
Triumph 8 piece Cylinder Head Bolt Set for 350/500cc Unit models. Suit most Triumph twin 350cc and 500cc OEM: E3794, E3795, E4456, 70-3794, 70-3795, 70-4456
+

bolt742-B14
£23.95 (£28.74 inc VAT)
Triumph High Tensile 9 piece Cylinder Head Bolt Set for TR6/T120 Unit models. Suit most later Triumgh twin 650cc 1x 70-4771 Centre head bolt - 5/16" x 3" x...
+

nut569-B18
£6.95 (£8.34 inc VAT)
OEM: 29-2023, 29-2053
Crankshaft Alternator Nut for BSA C11/C15/B31/B44/B50/A50/A65 Crankshaft Alternator Nut for BSA C11/C15/B31/B44/B50/A50/A65 models. 5/8" CEI thread....
+

pillarbolt513-B19
£1.95 (£2.34 inc VAT)
OEM: 40-0683, 70-4747
Contact breaker pillar bolt. To secure the contact points set on side points models, also secures the points cover. Fits BSA C15/B44/B50 and Triumph...
+

nut0702-B14
£1.45 (£1.74 inc VAT)
OEM: 14-0702
Triumph Alternator / Carb Manifold Mounting Nut - Unit Twins - 1969 Onwards For mounting the alternator stator on the primary chaincase on 500/650/750cc...
+

wash3300-B13
£4.95 (£5.94 inc VAT)
OEM: 70-3300, E3300
Triumph Crankshaft Timing Pinion Clamping Washer - Pre Unit + 650/750cc Unit Twins From 1954-82 Locates between the right hand main bearing and timing...
+

tab-0685-B18
£0.95 (£1.14 inc VAT)
OEM: 67-0685, 67-685
BSA Camshaft Pinion Tab Washer - A7, A10, A50 and A65 Models Camshaft pinion lockwasher - correct fitment on A7 and A10 models circa 1947-62. Also used...
+

wash2288
£0.35 (£0.42 inc VAT)
OEM: 70-2288, E2288
Triumph 3/8" Serrated Lock Washer - T140 Brake Hose / Flywheel + Various Uses Shakeproof serrated lock washer as used on many pre unit and unit Triumph...
+

enginenut-3977-B13
£2.95 (£3.54 inc VAT)
OEM: E3977, 70-3977
Alternator Rotor Locknut - Triumph - 70-3977 For mounting the alternator magnet rotor on the crankshaft. Pre-unit Triumph engines, and other models....
+

nut0398-B18
£6.95 (£8.34 inc VAT)
OEM: 70-0398, E398
Triumph Crankshaft Timing Pinion Nut - 500/650cc Pre-Unit Models 3/4" x 20 TPI - Stainless steel OEM: 70-0398, E398
+

bolt574-B19
£3.95 (£4.74 inc VAT)
OEM: 67-1259
BSA A7, A10 Magneto Bolt - 67-1259 BSA A7/A10 extended magneto fixing bolt Mounts the magneto to the engine, this is the lover fixing bolt that can't be...
+

bolt752-B14
£18.95 (£22.74 inc VAT)
Engine/Gearbox Mounting Bolt Set BSA A10, A7 Swinging Arm models 10 piece UK Version: does not have nuts on 4 of the bolts

screw0688-B4
£0.75 (£0.90 inc VAT)
OEM: 97-0688, H688
Triumph Slotted Nacelle Motif / Gear Pointer Screw - 5BA x 1/4" Full thread 1/4" UH (6.7mm) OEM: 97-0688, H688
+

bolt401-B19
£1.95 (£2.34 inc VAT)
OEM: 14-1401
Triumph 650cc Twin - Cylinder Head Stud - 14-1401 Also fits some of the T140 750cc UNF & UNC OEM: 14-1401
+

nut3735-B13
£2.95 (£3.54 inc VAT)
OEM: 70-3735
Alternator Rotor Nut - Triumph - 70-3735 To secure the alternator rotor on the shaft. Triumph 350cc and 500cc OEM: 70-3735
+

screw1647-B13
£2.95 (£3.54 inc VAT)
OEM: 70-1647, E1647
Triumph Crankcase Inner Boss Joint Screw - Pre Unit 350/500/650cc Models - Circa 1946-62 Correct fitment on pre unit 3T,  5T, T100, TR5, 6T, T110, TR6...
+

stud2109-B19
£1.95 (£2.34 inc VAT)
OEM: 21-2109, S2109
Triumph /BSA Sump Plate Stud - OIF Models from 1971 Sump plate to frame stud 5/16" x 24TPI x 1" UNF OEM: 21-2109, S2109
+

nut1906-B13
£0.95 (£1.14 inc VAT)
OEM: 21-1906, S1906
Triumph Oil Pump Mounting Nut - 500/650cc Models From 1969 Onwards + 750cc Twins Circa 1973-79 Bevelled oil pump mounting nut with UNF threads. Correct...
+

nut0643-B18
£4.95 (£5.94 inc VAT)
OEM: 67-0643, 67-643
BSA Crankshaft Timing Side Pinion Drive Nut - A50, A65, A7, A10 Models - LH Thread Half time pinion gear locknut as used on all BSA A50/A65 models from...
+

bolt14-0103-B19
£0.75 (£0.90 inc VAT)
OEM: 14-0103
Triumph Mounting Bolt - 14-0103 1/4" UNF bolt, used widely on Triumph motorcycle OEM: 14-0103
+

nut0076-B14
£1.25 (£1.50 inc VAT)
OEM: W76, 37-0076
Triumph Twin - Cylinder Base Nut - W76 Also used in some pre-unit gearboxes OEM: W76, 37-0076
+

nut2228-B13
£2.95 (£3.54 inc VAT)
OEM: 70-2228, E2228
Triumph Dynamo To Gear Case Domed Nut - Pre Unit 350/500/650cc Models - Circa 1946-59 Locates in the top right hand side of the timing case. Correct...
+

bolt763-B19
£1.95 (£2.34 inc VAT)
OEM: 21-1875
Triumph High tensile bolt 1/4 x 1/4 UNC. Rockerbox corner bolt (1969-) OEM: 21-1875
+

nut2182-B13
£2.45 (£2.94 inc VAT)
OEM: 70-3735
Alternator Rotor Nut - Triumph T120, T140, TR7, T160 - 1971-82 To secure the alternator rotor on the shaft. Thread: 7/16" UNF - 20 TPI Longer type with...
+

bolt0241-B19
£2.45 (£2.94 inc VAT)
OEM: 14-0241
Triumph T140, TR7 Cylinder Head Bolt - UNF Thread Length UH: 3+1/2" (88.6mm) Diameter: 3/8" UNF thread OEM: 14-0241
+

nut2177-B14
£0.95 (£1.14 inc VAT)
OEM: 21-2177
T140/TR7 Cylinder base nut (Outer studs) 1972-82 OEM: 21-2177
+

nut1492-B13
£4.95 (£5.94 inc VAT)
OEM: 70-1492, E1492
Triumph Exhaust Camshaft Nut LH Thread - 500/650cc Pre-Unit Twins Camshaft retaining nut. 5/8" 20 TPI with left hand thread. OEM: 70-1492, E1492
+

wash3770-B13
£2.45 (£2.94 inc VAT)
OEM: 82-3770, F3770
Triumph Serrated Gearbox Clamp Washer - Pre Unit 500/650cc Models Circa 1956-62 Serrated clamping washer, fits on the top gearbox mounting stud to...
+

stud1539-B19
£2.95 (£3.54 inc VAT)
OEM: 70-1539, E1539
Triumph Crankcase Oil Pipe Block Stud - Pre Unit 350/500/650cc Twins From 1939-62 Oil junction block to crankcase stud - correct fitment on pre-unit...
+

screwkit-950M-B9
£37.95 (£45.54 inc VAT)
OEM: E1049, E427, E2691 , E329. T452, E573, 70-1049, 70-0427, 70-2691, 70-0329, 57-0452, 70-0573
Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit Dynamo models Circa 1946-53 Complete set of engine/gearbox screws suitable for 5T, T100,...
+

wash8134
£0.15 (£0.18 inc VAT)
OEM: 70-8134, 36-0382, 01-4117, E8134
5/16" Serrated Lock Washer - Flat Type - Various Uses on Pre Unit and Unit BSA/Triumph Models Shakeproof serrated washer as used to secure bolts -...
+

nut3772-B13
£4.45 (£5.34 inc VAT)
OEM: 82-3772, F3772
Triumph Gearbox Adjuster Sleeve Nut - Pre Unit 500/650cc Models Circa 1955-62 Timing side sleeve nut - locates on the gearbox top clamp stud to position...
+

nut5664-B13
£9.95 (£11.94 inc VAT)
OEM: 15-5664
BSA Gearbox Adjuster Nut - A, B and M Group - Rigid, Plunger and Swinging Arm Models Gearbox adjusting bolt nut - correct fitment on swinging arm A7,...
+

nut3771-B13
£4.45 (£5.34 inc VAT)
OEM: 82-3771, F3771
Triumph Gearbox Clamp Flanged Nut - Drive Side - Pre Unit 500/650cc Models Circa 1955-62 Drive side serrated and flanged nut - locates on the gearbox top...
+

bolt3809-B13
£4.95 (£5.94 inc VAT)
OEM: 70-3809, E3809
Triumph Rocker Oil Feed Bolt - Unit 350/500cc Models Circa 1958-74 Oil feed pipe retaining bolt - correct fitment on 3TA, 5TA, T90 and T100 models from...
+

bolts2980b-B19
£2.25 (£2.70 inc VAT)
OEM: 31-222, 31-0222, 67-0280, 70-2980
BSA Engine Stud - 31-222 Coarse thread to screw into the engine, and fine thread for the nut. OEM: 31-222, 31-0222, 67-0280, 70-2980
+

screw6609-B19
£1.75 (£2.10 inc VAT)
OEM: 14-6609
Triumph 1/4" UNC Cheese Head Screw - 500/650/750cc Models Circa 1969-79 Cheesehead screw - used extensively on unit singles, twins and triples from 1969...
+

bolt735H-B19
£3.95 (£4.74 inc VAT)
OEM: 21-2200
Triumph T140, Cylinder head stud (centre 5/16" stud) OEM: 21-2200
+

nut0124-B14
£3.45 (£4.14 inc VAT)
OEM: 02-0124, 2-124, 27-6716
1/2" x 20 CEI Thin Nut - BSA Camshaft Pinion Nut + Hub Spindle Lock Nut - Various Uses Used to secure the camshaft gear on A7 and A10 models + some early...
+

bolt6505-B14
£0.45 (£0.54 inc VAT)
OEM: 14-6505
1/4" UNC x 7/8" Countersunk Screw - Triumph Unit 500cc Models + Universal Use Flat head slotted screw as used on T100 models from 1969 onwards: Gearbox...
+

bolt3979-B14
£3.95 (£4.74 inc VAT)
OEM: E3979, 70-3979
Bolt - Screw for RM15 Alternator - 70-3979 To secure the alternator stator on early pre-unit Triumph models. OEM: E3979, 70-3979 Made in England
+

bolt-set0078-B14
£56.95 (£68.34 inc VAT)
OEM: 00-0078
Triumph Pre-Unit Engine Mounting Stud / Bolt Set - 500/650cc Models from 1954-59 To mount the engine and gearbox in pre-unit models with a single...
+

bolt988-B19
£3.95 (£4.74 inc VAT)
OEM: 70-3795
Triumph T90/T100 Cylinder Head bolt (with torque stay extension) OEM: 70-3795
+

stud1536-B13
£2.25 (£2.70 inc VAT)
OEM: 70-1536, E1536
Triumph Crankcase to Oil Pump Stud - Pre Unit 350/500/650cc Twins From 1939-62 Oil pump body to crankcase fixing stud - Correct fitment on pre-unit twins...
+

nut6523-B13
£4.95 (£5.94 inc VAT)
OEM: 70-6523, E6523
Triumph Exhaust Camshaft Nut LH Thread - Unit 500/650/750cc Models - Circa 1970-87 Exhaust camshaft retaining nut on all 650/750cc twins from 1970 onwards...
+

stud2022-B19
£1.95 (£2.34 inc VAT)
OEM: 70-2022, E2022
Triumph Magneto To Crankcase Fixing Stud - Pre Unit 350/500/650cc Models - Circa 1946-62 Correct fitment on pre unit 3T, 5T, TR5, 6T, T110, TR6 and T120...
+

wash0138-B18
£0.95 (£1.14 inc VAT)
OEM: 76-0138, 76-138
BSA Oil Pump Stud Tab Washer - A50 and A65 Models Circa 1964-73 Tabbed lock washer - locates between the oil pump housing and the securing stud. Correct...
+

bolt410
£19.95 (£23.94 inc VAT)
BSA Engine/Gearbox Mounting Bolt Set - B Group Swinging Arm Models 9 Pieces
+

bolt741-B14
£21.95 (£26.34 inc VAT)
OEM: E2873, 70-2873, E2874, 70-2874, E1596A, 70-1596A
Triumph High Tensile Alloy 8 piece Cylinder Head bolt set for Triumph T110/T120 Pre-unit models (1957-62). Suit most early Triumph twin 650cc OEM: E2873,...
+

enginestud-1866-B19
£7.95 (£9.54 inc VAT)
OEM: 21-1866
Long Alternator Mounting Stud Triumph 650 Twins - 1969-74 Fits later 650 Twins from 1969-74 Made in England OEM: 21-1866
+

enginestud-239-B19
£1.95 (£2.34 inc VAT)
OEM: 21-1867
Short Alternator Mounting Stud Triumph 650 Twins - 1967 onwards Fits 650 Unit Twins from 1967 onwards OEM: 21-1867
+

enginestud-4536-B13
£8.45 (£10.14 inc VAT)
OEM: 70-4536, E4536
Triumph Long Alternator Mounting Stator Stud - 650cc Models Circa 1963-68 Front stator stud, correct fitment on unit 6T, T120 and TR6 models circa...
+

enginestud-3695-B14
£4.45 (£5.34 inc VAT)
OEM: 70-3695, E3695
Triumph Engine Mounting Stud - Unit 350/500cc Models Circa 1958-69 Locates between the engine mounting plates on 3TA, 5TA, T90  and T100 models circa...
+

stud2149-B19
£2.45 (£2.94 inc VAT)
OEM: 21-2149, S2149
Triumph Gearbox Inner Cover Stud - 750cc Twins + Later T120 and TR6 Models From 1972 Onwards Crankcase to gearbox stud as used on later 650cc twins from...
+

bolt716-B19
£3.45 (£4.14 inc VAT)
OEM: 70-0327
Triumph T120, TR6 etc, 650cc Cylinder head bolt (outer bolt) OEM: 70-0327
+

bolt762-B19
£2.95 (£3.54 inc VAT)
OEM: 70-4771
Triumph T120, TR6 etc, 650cc Cylinder Head bolt (centre 5/16" bolt) OEM: 70-4771
+

bolt206-B19
£4.45 (£5.34 inc VAT)
OEM: 21-2206
Triumph 650cc and 750cc Twin - Cylinder Head Bolt 3/5" UNF OEM: 21-2206
+

gbox008-B18
£5.95 (£7.14 inc VAT)
OEM: 70-4565, E4565
Triumph Crankshaft Timing Pinion Nut - Unit 650cc Models Circa 1963-71 Correct fitment on unit 6T, T120 and TR6 models. OEM: 70-4565, E4565
+

nut1463-B13
£8.95 (£10.74 inc VAT)
OEM: 70-1463, E1463
Triumph Inlet Camshaft Oil Pump Drive Nut - Pre Unit 500/650cc Twins - Circa 1946-61 Correct fitment for earlier pre-unit twins -  3TA, 5T, T100, 6T,...
+

stud0672-B19
£2.45 (£2.94 inc VAT)
OEM: 70-0672, E672
Triumph Cylinder Base Stud - Pre Unit 500/650cc and Unit 650cc Models Correct fitment on many pre unit twins - 5T, TR5, 6T, T110, TR6, T120 circa...
+

nut1915-B13
£1.45 (£1.74 inc VAT)
OEM: 21-1915, S1915
Triumph Alternator Rotor Nut - T90, T100 and TR5T Models From 1969 Onwards To secure the alternator rotor on the shaft - correct fitment on 350/500cc...
+

nut3120-B14
£5.45 (£6.54 inc VAT)
OEM: 70-3120, E3120
Triumph Crankshaft Drive Side Nut - Pre Unit 500/650cc Dynamo Models - Circa 1953-59 Engine sprocket nut as used on pre-unit T100, TR5, T110, TR6 and...
+

screw1907-B19
£0.95 (£1.14 inc VAT)
OEM: 21-1907, 14-7020, S1907
Triumph Inner Gearbox Cap Screw - Later 650cc + All 750cc Twins From 1969 Onwards Inner gearbox cap screw on later T120 and TR6 models + all T140 and TR7...
+

bolt4098-B14
£2.45 (£2.94 inc VAT)
OEM: 70-4098, E4098
5/16" BSF - 1+7/8" Crankcase Bolt - Unit 650cc + T20 Tiger Cub Models Circa 1960-68 Small hex, part threaded crankcase bolt. One bolt required on unit...
+

stud0669
£4.45 (£5.34 inc VAT)
OEM: 21-0669, S669
Triumph Crankcase Halves Front Stud - 750cc Twins + Later T120 and TR6 Models From 1972 Onwards Crankcase front stud - secures the exhaust pipe stays. As...
+

stud1864-B19
£1.25 (£1.50 inc VAT)
OEM: 21-1864, S1864
Triumph Crankcase to Oil Pump Stud - 500/650cc Models From 1969 Onwards + 750cc Twins Circa 1973-79 Oil pump body to crankcase fixing stud with UNF/UNC...
+

bolt660-B19
£3.95 (£4.74 inc VAT)
OEM: 70-1596
Triumph T120, TR6 etc, 650cc Cylinder Head bolt (with torque stay extension) OEM: 70-1596
+

enginestud-2199-B19
£5.95 (£7.14 inc VAT)
OEM: 21-2199
Long Alternator/Stator Stud Triumph 750 Twins - 1972-82 Alternator Stator Stud suitable for 750cc Triumph T140 Bonneville & TR7 models from...
+

nut0152-B14
£3.45 (£4.14 inc VAT)
OEM: 15-0152, 15-152, NM16187, 06-7664
7/16" x 20 TPI Nut  - BSA M20 & M21 Cylinder Base Nut + Norton Bottom Yoke Nut Height: 7/16" (10.8mm) OEM:  15-0152, 15-152, NM16187, 06-7664
+

enginestud-4537-B13
£5.45 (£6.54 inc VAT)
OEM: 70-4537, E4537
Triumph Short Alternator Mounting Stator Stud - 650cc Models Circa 1963-68 Rear stator stud, correct fitment on unit 6T, T120 and TR6 models circa...
+

bolt3767-B13
£5.95 (£7.14 inc VAT)
OEM: 82-3767, F3767
Triumph Gearbox Adjuster Pivot Pin - Pre Unit 500/650cc Models Circa 1956-59 Abutment pin to fit T100, 6T, T110, T120, TR6 models circa 1956-59. Made in...
+

nut2053-B13
£5.95 (£7.14 inc VAT)
OEM: 29-2053, 70-8146
BSA/Triumph Alternator Rotor Nut - Shouldered - C12, C15, B25, B40, B44, B50 and TR25W Models Flanged nut used to secure the alternator rotor on the...
+

bolt736H-B19
£5.95 (£7.14 inc VAT)
OEM: 21-2201
Triumph T140 Cylinder head stud (outer 3/8" Stud) OEM: 21-2201
+

bolt113-B19
£3.95 (£4.74 inc VAT)
OEM: 70-4456
Triumph T90/T100 Cylinder head bolt (outer with extended hexagon). High Tensile 3/8" x 2-3/4" 26TPI bolts. OEM: 70-4456
+

bolt-set0011-B14
£23.95 (£28.74 inc VAT)
OEM: 36-0011, 36-11
Cylinder Head Bolt Set - BSA M20/M21 Alloy Head - 1950 Onwards High quality BZP plated high tensile bolts with correct shanks for use with alloy heads...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.