Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK
 
 
 

USEFUL & INTERESTING USEFUL & INTERESTING

SHIPPING COSTS SHIPPING COSTS

fkwiring440
£5.75
HT Lead Terminal, Brass screw in end Supplied in pack of 5 Suitable for Spark Plug Wire. Fits in the distributor, these do not fit in...
+
ADD TO FAVOURITES

fkwiring441
£3.95
Solder On Bullet Connector for 3mm Cable (for 3mm square cable) Supplied in pack of 10
+
ADD TO FAVOURITES

fkwiring442
£3.95
Crimp on Brass Bullet connector for 2mm Cable (for 2mm square cable) Supplied in pack of 10
+
ADD TO FAVOURITES

fkwiring443
£3.95
Crimp on Brass Bullet connector For 1mm Cable (for 1mm square cable) Supplied in pack of 10
+
ADD TO FAVOURITES

fkwiring444
£2.89
Single Insulated Connector Sleeve For Bullet Ends Supplied in pack of 10
+
ADD TO FAVOURITES

fkwiring445
£2.49
Double Insulated Connector Sleeve For Bullet ends. Supplied in pack of 5
+
ADD TO FAVOURITES

fkwiring446
£1.99
6.3mm Female Spade Connector, Solder On type. Supplied in pack of 10
+
ADD TO FAVOURITES

fkwiring447
£1.45
Clear Insulator Sleeve For 6.3mm Spade Terminal. Supplied in pack of 10
+
ADD TO FAVOURITES

fkwiring448
£3.45
9.5mm Female Spade Connector, Solder On type Supplied in pack of 5
+
ADD TO FAVOURITES

fkwiring449
£1.95
Clear Insulator Sleeve For 9.5mm Spade Terminal. Supplied in pack of 5
+
ADD TO FAVOURITES

fkwiring450
£3.95
5mm Ring Connector For 3mm Cable. (for 3mm square cable) Supplied in pack of 10
+
ADD TO FAVOURITES

wire510
£2.90
Black Braided Sleeving 9.5mm - Expandable Electric Cable Sleeve Black expandable braided sleeving, flame retardent. Operating...
+
ADD TO FAVOURITES

wire262
£2.45
Polyethylene spiral binding, ideal for electrical harnesses and wiring looms. Protects cables against chafing OD: 11.8mm Minimum...
+
ADD TO FAVOURITES

wire214
£2.45
Black PVC sleeving for use on electrical harnesses Protects cables against chafing ID: 14mm Price is per METRE of sleeve.
+
ADD TO FAVOURITES

wire207
£1.75
Black PVC sleeving for use on electrical harnesses Protects cables against chafing ID: 7mm Price is per METRE of sleeve.
+
ADD TO FAVOURITES

wiring911
£0.55
Distributor Cap HT Insulator Fits over the Spark plug and Ignition Coil wire, and then over the distributor cap, to prevent water ingress.
+
ADD TO FAVOURITES

wiring912
£0.55
Ignition Coil HT Insulator Fits over the Ignition Coil on the HT output, to prevent water ingress.
+
ADD TO FAVOURITES

fkwiring528
£1.95
6.3mm Male Blade Connector, Terminal Hole Type. 5mm Hole Supplied in pack of 10
+
ADD TO FAVOURITES

fkwiring121
£1.99
6.3mm Male Blade Connector, Locking Tag Type. Supplied in pack of 10
+
ADD TO FAVOURITES

fkwiring530
£2.25
6.3mm Flag Connector, Push on Type. Supplied in pack of 10
+
ADD TO FAVOURITES

fkwiring531
£1.45
6.3mm Flag Connector, Insulator. Supplied in pack of 10
+
ADD TO FAVOURITES

wiring5015
£0.75
OEM: 185015, LU185015, CYB301
Split Brass Washer For HT Lead / Distributor Cap - 185015 Diameter: 3/8" (9.92mm) Thickness: 1/32" (0.54mm) OEM:  185015, LU185015,...
+
ADD TO FAVOURITES

wiring-term001
£0.65
Ignition Coil/Distributor Straight Brass Terminal - Crimp On Push Fit Type Brass push in terminal for distributor coil - straight...
+
ADD TO FAVOURITES

wiring-term002
£0.65
Ignition Coil/Distributor 90° Brass Terminal - Crimp On Push Fit Type Brass push in terminal for distributor coil - right angled...
+
ADD TO FAVOURITES

wiring-term003
£0.85
Distributor Cap 90° HT Insulator Rubber Boot Fits over the spark plug and ignition coil wire, and then over the distributor cap to...
+
ADD TO FAVOURITES

wiring-term004
£1.45
Bosch Type Distributor Terminal - Straight Stainless Steel - Crimp On Push Fit Type Stainless steel HT terminal to suit Bosch...
+
ADD TO FAVOURITES

wiring-term005
£0.65
Ignition Coil/Distributor Straight Brass Terminal - Flat Contact Clip On Type Brass push on terminal for distributor coil - flat...
+
ADD TO FAVOURITES

wire2501
£11.95
Self Amalgamating Elastic Tape - Wiring Harness + Universal Use - 25mm x 10m Strong self amalgamating polyisobutylene elastic tape...
+
ADD TO FAVOURITES

wire1700
£4.45
Black Fabric Adhesive Tape - Wiring Harness + Universal Use - 9mm or 19mm x 25m Solvent free therefore ideal for use with PVC...

sw-part106
£3.95
OEM: S3857, S3858
Wipac Ducon / Tricon Switch Grub Screws - Pack of 5 A pack of five replacement grub screws with the correct thread and dimensions for...
+
ADD TO FAVOURITES

wiring1172
£4.95
2 Pin Quick Release Plastic Male/Female Connector Block - 2 Wires Quick release plastic connector block with 2 blade connectors, 2...
+
ADD TO FAVOURITES

wiring1164
£5.45
4 Pin Quick Release Plastic Male/Female Connector Block - 4 Wires Quick release plastic connector block with 4 blade connectors, 4...
+
ADD TO FAVOURITES

wiring1166
£5.95
6 Pin Quick Release Plastic Male/Female Connector Block - 6 Wires Quick release plastic connector block with 6 blade connectors, 6...
+
ADD TO FAVOURITES

wiring0705
£1.25
OEM: 40-0705, 40-705, 70-8148, E8148
BSA Alternator or Contact Breaker Leads Wiring Grommet - A50, A65, B25, B50 + Bantam Models Double sided rubber grommet to secure...
+
ADD TO FAVOURITES

wiring470
£0.95
OEM: 71-1345
Outer Alternator Wiring Grommet - Triumph and BSA Models Wiring grommet that goes around the alternator wire coming from the primary...
+
ADD TO FAVOURITES

wiring471
£0.95
OEM: 70-4144, 68-0209, E4144
Inner Alternator Wiring Grommet - Triumph and BSA Models Fits Triumph Unit construction models and BSA twins and singles. Wiring...
+
ADD TO FAVOURITES

term102
£1.45
5.30mm Ring Terminal For .5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+
ADD TO FAVOURITES

term126
£1.25
6.30mm Blade Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+
ADD TO FAVOURITES

term109
£1.25
6.30mm Push-On Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+
ADD TO FAVOURITES

term141
£1.45
6.30mm Insulated Push-On Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+
ADD TO FAVOURITES

term136
£1.25
4.00mm Insulated Nipple Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+
ADD TO FAVOURITES

term135
£1.45
4.00mm Insulated Receptacle Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+
ADD TO FAVOURITES

term104
£1.25
5.30mm Insulated Fork Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+
ADD TO FAVOURITES

wiring375
£0.95
Red Battery Terminal Insulator Cover Red rubber battery terminal cover, to protect against short circuit. Approx size: Wire hole 8mm,...
+
ADD TO FAVOURITES

wiring370
£0.95
Black Battery Terminal Insulator Cover Black rubber battery terminal cover, to protect against short circuit. Approx size: Wire hole...
+
ADD TO FAVOURITES

term133
£1.95
6.30mm Push-On Piggy-Back Terminal For 0.5mm - 1.5mm Cable (for 0.5-1.5mm square cable) Supplied in pack of 10
+
ADD TO FAVOURITES

term0352
£2.25
7.9mm Ring Terminal for 7.10mm Diameter Cable - Non Insulated Hole diameter: 5/16" (7.9mm) ID before crimping: 9/32" (7.5mm) Overall...
+
ADD TO FAVOURITES

wiring8155
£2.95
OEM: 70-8155, 41-0715, 41-715
Alternator/Contact Breaker Rubber Cable Grommet - BSA B25, B44, B50 + Triumph TR25 Models Located on the top of the inner timming...
+
ADD TO FAVOURITES
FEKED HAVE BOUGHT
SAMMY MILLER PRODUCTS
We now offer a huge range
of specialist trials bike parts
for many British, European
and Japanese marques.

VAT STATEMENT VAT STATEMENT