.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Cable Parts

cabkit
£7.95 (£9.54 inc VAT)
Emergency Cable Repair Kit - Inner Wire + Various Nipples Emergency cable repair kit for temporary fixing throttle or clutch cables. 1.6M 1.5mm cable....
+

clutch043c-B23
£1.75 (£2.10 inc VAT)
OEM: 57-1646, 68-3264
Clutch Cable Adjuster Sleeve /Rubber Boot For Triumph 650cc and 750cc models OEM: 57-1646, 68-3264, T1646
+

fkcab607-E12
£2.95 (£3.54 inc VAT)
OEM: 99-0241, 16/011
Cable Stop Large slotted cable stop, standard Doherty and Amal, for twistgrip Fits into the Twistgrip to retain the end of the throttle cable. Diameters:...
+

amal-RKC/613
£2.95 (£3.54 inc VAT)
OEM: RKC/613, 4/035, 9/035, 5/077, 9/077
Genuine Amal Cable Adjuster and Lock Nut - RKC/613 For 600, 900, 276, 376, 389 series Amal carburettors. Screws into the top cap to adjust the cable....
+

fkcabtie03b-4+1/2"-E12
£2.95 (£3.54 inc VAT)
Pack of 10 Black Rubber Cable Ties - 3" or 4+1/2" Ten quality black rubber authentic style cable ties Available in a choice of sizes - please select...
 

clevis14-1116-E12
£1.95 (£2.34 inc VAT)
Clevis Pin 1/4" x 11/16" 1/4" (6mm) diameter, 11/16" (15mm) shaft length Suitable for cable end clevis. To secure the cable end to a lever
+

fklev098-E12
£3.95 (£4.74 inc VAT)
Cable Adjuster Set Slide Type Groove cut through side to allow fitting after cable made up. Total length - 1+3/8" (35mm) Thread diameter - 3/8" (10mm)
+

cab-slotted-std-E12
£3.45 (£4.14 inc VAT)
OEM: 18/880
Barrel Type Slotted Nipple - Outside Diameter 3/8" - Standard Suitable for use with standard pre-made cables fitted with a 3/16" pear nipple. Typically...
+

fkcab11-E12
£0.40 (£0.48 inc VAT)
Cable End Ferrule No.1 Suitable for outer casing ends. Priced singly.
+

adj1708-E12
£4.95 (£5.94 inc VAT)
OEM: 18-1708, 18-1709, 18-838, 18-839, 99-1031, 60-3585, 60-3586
Cable Adjuster and Lockring Nut - Slide In Type - Triumph, BSA and AMC Groove cut through side to allow fitting after cable made up. Total length:...
+

clevis490-E12
£3.95 (£4.74 inc VAT)
Clevis Bend - Quick Release - 1/4" to suit 1/4" (6mm) Clevis Pin with 11/16" (15mm) shaft length Suitable for cable end with a pear nipple, to allow...
+

fkcab13-E12
£0.40 (£0.48 inc VAT)
Cable End Ferrule No.3 Suitable for outer casing ends. Priced singly.
+

amal-adj001
£1.95 (£2.34 inc VAT)
OEM: 4/035, 9/035, 99-1024, 99-7096
Amal Carburettor Cable Adjuster For 600, 900, 276, 376, 389 series Amal carburettors Screws into the top cap to adjust the cable. OEM: 4/035, 9/035,...
+

fkcab12-E12
£0.50 (£0.60 inc VAT)
Cable End Ferrule No.2 Suitable for outer casing ends. Priced singly.
+

fkcabbox03-E12
£8.95 (£10.74 inc VAT)
OEM: 244/104, 99-0341, 01-9824, 60-0685, D685
Junction Box - Twin Cable Control - Black Nylon Suitable for: Single cable entry from twistgrip or air lever and two cable outlets for twin carburettors....
+

fkcab27-E12
£0.75 (£0.90 inc VAT)
Pear type cable nipple No.3 Suit no.3 wire. Length: 3/8"(9mm), Head: 1/4"(7mm), Neck: 5/32"(4mm) Sold Singly. - Suit Clutch cable at gearbox end.
+

fkcab29-E12
£0.50 (£0.60 inc VAT)
Tube type cable nipple Length: 1/8"(3mm), Diameter: 1/8"(3mm) Sold each - Suit Carburettor Air and Throttle slide cable ends.
+

fkcab20-E12
£0.80 (£0.96 inc VAT)
Drum type cable nipple Length: 1/8"(3mm), Diameter: 1/4"(6mm) Sold Singly. - Suit some air and magneto levers and twistgips.
+

fkcabtie03JB-E12
£5.95 (£7.14 inc VAT)
OEM: 60-0978
Pack of 5 Black Rubber John Bull Style Cable Ties - 4+1/4" Five quality black rubber authentic style cable ties Premium quality and extra strong Made...
+

cab8245-E12
£0.75 (£0.90 inc VAT)
OEM: 82-8245, F8245
Triumph Starlock Washer for Front Cable Holder / Retainer - OIF Models 5/16" starlock washer used to fix cable retainer that clips into a hole in the...
+

cab2270B-E12
£3.45 (£4.14 inc VAT)
OEM: 97-2270, H2270, 97-4479, H4479
Triumph Front Cable Holder / Retainer - OIF Models - Split Type Attaches to your front mudguard, the grommet type fitting clips into a hole in the...
+

cab366-E12
£1.95 (£2.34 inc VAT)
OEM: 366/2
Cable Stop - Small Amal Type - 366/2 Small slotted cable stop, standard Amal type, fits into the twistgrip to retain the end of the throttle cable....
+

fkcab19-E12
£0.80 (£0.96 inc VAT)
Barrel type cable nipple Length: 3/16"(5mm), Diameter: 3/16"(5mm) Sold Singly. - Suit some Twistgips.
+

clutch046-B23
£2.95 (£3.54 inc VAT)
OEM: 57-0495, T495
Clutch Lever Rubber - Triumph - 57-0495, T495 Triumph Pre-Unit Clutch lever rubber boot. OEM: 57-0495, T495
+

amal-adj102
£1.45 (£1.74 inc VAT)
OEM: 5/077, 9/077, 99-7097, 99-0224, 06-7972
Amal Carburettor Cable Adjuster Lock Nut For 600, 900, 276, 376, 389 series Amal carburettors Locks the screw in the top cap to adjust the cable. OEM:...
+

fkcab26-E12
£0.60 (£0.72 inc VAT)
Pear type cable nipple No.2 Suit no.2 wire. Length: 5/16"(8mm), Head: 7/32"(5.5mm), Neck: 1/8"(3.5mm) Sold Singly. - Suit various controls.
+

fkcab23-E12
£1.45 (£1.74 inc VAT)
Barrel type cable nipple Length: 3/8"(9mm), Diameter: 3/8"(9mm) Sold Singly. - Suit some clutch and brake levers.
+

fkcab21-E12
£0.85 (£1.02 inc VAT)
Barrel type cable nipple Length: 3/8"(9mm), Diameter: 1/4"(6mm) Sold Singly. - Suit some clutch and brake levers.
+

cabbox003SS-E12
£19.95 (£23.94 inc VAT)
OEM: 244/104, 99-0341, 01-9824, 60-0685, D685, 68-8561
Junction Box - Twin Cable Control - Stainless Steel With Brass Internal Slider Amal choke/throttle cable splitter used on various models including BSA,...
+

fkcab633-E12
£1.99 (£2.39 inc VAT)
Cable Adjuster - Universal - 5/16" 5/16" Cable Adjuster with lock nut. Total length - 1+5/8" (41mm) Thread diameter - 5/16" (8mm)
+

fkcab89
£0.70 (£0.84 inc VAT)
Inner Cable Wire No.1 19 strand cable. Diameter .062" (1.57mm) Price per Foot (12").
+

fkcab18-E12
£0.80 (£0.96 inc VAT)
Ball type cable nipple Diameter: 1/4"(6mm) Sold Singly. - Suit some exhaust lifter levers.
+

fkcab30-E12
£0.75 (£0.90 inc VAT)
Barrel type cable nipple Length: 1/2"(13mm), Diameter: 3/8"(9mm) Sold Singly. - Suit some clutch and brake levers. Fits Cable size No.3, and a very tight No.4
+

cab3682-E12
£4.45 (£5.34 inc VAT)
OEM: 97-3682, H3682
Triumph/BSA Front Brake Cable Guide Bracket - Unit Singles and Twins + T150 Models Circa 1968-73 Locates over the timing side fork leg pinch bolt -...
+

fkcab95
£0.75 (£0.90 inc VAT)
Outer Cable Casing No.1 Outside Diameter .190" (4.8mm) Price per Foot (12").
+

fkcab25-E12
£0.70 (£0.84 inc VAT)
Pear type cable nipple No.1 Suit no.1 wire. Length: 5/16"(8mm), Head: 7/32"(5.5mm), Neck: 1/8"(3.5mm) Sold Singly. - Suit various controls.
+

adj1006-E12
£2.95 (£3.54 inc VAT)
OEM: AM18/1006
Doherty Type Cable Adjuster - 207 / 208PA Series Levers Groove cut through side to allow fitting after cable made up. Total length: 1+19/32" (40.5mm)...
+

fkcab14-E12
£0.40 (£0.48 inc VAT)
Cable End Ferrule No.4 Suitable for outer casing ends. Priced singly.
+

fkcab91
£0.70 (£0.84 inc VAT)
Inner Cable Wire No.3 19 strand cable. Diameter .085" (2.16mm) Price per Foot (12").
+

cab8506-E12
£2.45 (£2.94 inc VAT)
OEM: 90-8506
Cable Stop / Ferrule - Brake & Clutch Cable - Bantam Type for Welded Lug Bars Slotted cable ferrule to stop the cables pulling through the handlebar...
+

cab5090-E12
£1.45 (£1.74 inc VAT)
OEM: 40-5090, 97-2654, H2654
BSA/Triumph Wire Cable Guide - A50, A65, B25, B44, C25 + T250, TR25W - Circa 1967-70 Locates on the back of the lower fork pinch bolt to retain the...
+

cab9325-E12
£2.25 (£2.70 inc VAT)
OEM: 76-9325, 97-2659, H2659
BSA/Triumph Cable Guide Grommet - Top Yoke - A50, A65, B25, B44, C25 + T250, TR25W - Circa 1967-70 Locates within the bracket that attaches to the top...
+

fkcab97
£0.80 (£0.96 inc VAT)
Outer Cable Casing No.3 Outside Diameter .225" (5.7mm) Price per Foot (12").
+

tie604-E12
£2.95 (£3.54 inc VAT)
OEM: 82-9918
8" Long Alloy Cable Ties Triumph - Universal - Pack of 5 Triumph O.E.M. style Alloy Cable Ties Approximately 5" Long OEM: 82-9918
+

adj1005-E12
£2.95 (£3.54 inc VAT)
OEM: AM18/1005
Doherty Type Cable Adjuster Nut - 207 / 208PA Series Levers Groove cut through side to allow fitting after making up cable. OD: 1+19/32" (19.3mm) Depth:...
+

c/cable3475-B18
£2.95 (£3.54 inc VAT)
OEM: 70-3475, E3475
Clutch Cable / Outer Gearbox Cover Grommet - Triumph Unit 350/500cc Models Circa 1958-63 Rubber grommet locates on the top of the outer gearbox casing to...
+

fkcab01-E12
£1.95 (£2.34 inc VAT)
Barrel type solderless cable nipple Length: 3/8"(9.5mm), Diameter: 1/4"(6mm) Sold singly.
+

cab-pear480-E12
£0.60 (£0.72 inc VAT)
Pear type cable nipple, to fit cable No.2 or No.3 Suit No.2 or No.3 wire. Length: 3/8"(9mm), Head: 1/4"(6mm), Neck: 1/8"(3.5mm) Sold Singly. - Suit...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.