.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Control Parts

beston-grip041-E17
£5.95 (£7.14 inc VAT)
OEM: 97-2124 ,97-2125, 06-1879, 19-7221, 19-7222
Rubber Handlebar Grips - Pair Beston Cushion Type Replica 7/8" Beston type handlebar grips. As fitted to Norton Commando, BSA...
+

fkgrip042-E17
£6.45 (£7.74 inc VAT)
Rubber Handlebar Grips 7/8" - Pair Amal Replica Type Length = 5" ID = 1" for throttle and 7/8" for other side
+

off-lev2930
£24.95 (£29.94 inc VAT)
OEM: 534/951, 534/952
Pair of Replica Amal Alloy Clutch and Brake Levers - Complete Assembly - 7/8" Bars Clutch and brake lever to fit 22mm (7/8") handlebars. Cast alloy...
+

clutch043c-B23
£1.75 (£2.10 inc VAT)
OEM: 57-1646, 68-3264
Clutch Cable Adjuster Sleeve /Rubber Boot For Triumph 650cc and 750cc models OEM: 57-1646, 68-3264, T1646
+

cabkit
£7.95 (£9.54 inc VAT)
Emergency Cable Repair Kit - Inner Wire + Various Nipples Emergency cable repair kit for temporary fixing throttle or clutch cables. 1.6M 1.5mm cable....
+

fktwist124-E7
£15.95 (£19.14 inc VAT)
Standard Universal Twist Grip With Amal Type Grips - 7/8" Bars Suitable for a throttle cable with a 1/4" barrel type nipple. Throttle assembly/twistgrip...
+

fkcab607-E12
£2.95 (£3.54 inc VAT)
OEM: 99-0241, 16/011
Cable Stop Large slotted cable stop, standard Doherty and Amal, for twistgrip Fits into the Twistgrip to retain the end of the throttle cable. Diameters:...
+

clip4112H-E12
£2.45 (£2.94 inc VAT)
OEM: 97-4112, H4112
Handlebar Cable Clip - Universal Fit for 7/8" Bars Correct fitment for late Triumph, BSA & Norton Models, but universal fit for all 7/8" bars. Note:...
+

amal-RKC/613
£2.95 (£3.54 inc VAT)
OEM: RKC/613, 4/035, 9/035, 5/077, 9/077
Genuine Amal Cable Adjuster and Lock Nut - RKC/613 For 600, 900, 276, 376, 389 series Amal carburettors. Screws into the top cap to adjust the cable....
+

fklev005-E14
£15.95 (£19.14 inc VAT)
OEM: 12/556, 12/161, 12/608, 66-8896, 60-3567, 60-3991, 60-4521, 60-3246
Air/Choke or Magneto Lever - Right Hand For 7/8" Handlebars - Ball End Right handed chrome plated air/choke lever as used on many British bikes - BSA,...
+

fklamp119-A23
£9.95 (£11.94 inc VAT)
Smiths Speedo/Tacho Bulb Holder Replacement bulb holder to fit in rear of Chronometric speedometer and tachometer. Takes a bulb of 9mm diameter base....
+

doherty-grip039-E17
£7.45 (£8.94 inc VAT)
OEM: 60-7470, 60-7471
Rubber Handlebar Grips - Pair Doherty type grips. Made in Europe. As fitted to Triumph T140/TR7 etc Length = 4+3/4" ID = 1" for throttle and 7/8" for...
+

fkcable041
£6.95 (£8.34 inc VAT)
Air Cable Universal - 376 Amal Monobloc For Amal 376 Monobloc carburettors. Outer Length: 33" Inner Length: 38" 1/4" Drum type nipple
+

fkcabtie03b-4+1/2"-E12
£2.95 (£3.54 inc VAT)
Pack of 10 Black Rubber Cable Ties - 3" or 4+1/2" Ten quality black rubber authentic style cable ties Available in a choice of sizes - please select...
 

cable-CBK042-E8
£6.95 (£8.34 inc VAT)
Universal Clutch/Brake Cable. 57" outer case length. Comes with 3/8" Barrel Nipple fitted, loose Pear Nipple ready for soldering, and spare ferrule....
+

clevis14-1116-E12
£1.95 (£2.34 inc VAT)
Clevis Pin 1/4" x 11/16" 1/4" (6mm) diameter, 11/16" (15mm) shaft length Suitable for cable end clevis. To secure the cable end to a lever
+

cable078
£7.95 (£9.54 inc VAT)
OEM: 60-0224
Triumph Throttle Cable 5T, T100, T110, 6T OEM: 60-0224 To suit Triumph - 5T, T100, T110, 6T - 1950-61 Angled metal sleeve at twist grip end Outer...
+

bush1527-E12
£4.95 (£5.94 inc VAT)
OEM: 97-1527, H1527
BSA / Triumph Handlebar Mounting Metalastic Bush - Unit 500/650/750cc Models BSA - A75 Rocket 3 (1969-72), A65 (1971-72). Triumph - T100/T100R (1967-71),...

cable760
£8.95 (£10.74 inc VAT)
OEM: 60-1993, 60-3079, 60-0667
Triumph Clutch Cable Suitable for following: Triumph - TR6S/S/T120 (1968) with adjuster, TR6/T120 (1969 on), TR6C/TR6R/T120R/T120V (1971-73). Outer...
+

fklev098-E12
£3.95 (£4.74 inc VAT)
Cable Adjuster Set Slide Type Groove cut through side to allow fitting after cable made up. Total length - 1+3/8" (35mm) Thread diameter - 3/8" (10mm)
+

slinky-cable713
£14.95 (£17.94 inc VAT)
Universal Throttle Cable Kit - 17 feet - 5 metres - Slinky Glide Over 5 metres of cable inner and outer, plus loads of nipples and rubber boots! STUNNING...
+

fktach071-G15
£6.95 (£8.34 inc VAT)
OEM: 60-2600, D2600
Speedometer/Tachometer Mounting Rubber / Binnacle - Large Rubber binnacle for Triumph TR6/T120/T140, OIF T160 and late BSA models including A65 OIF,...

cable281
£7.95 (£9.54 inc VAT)
OEM: 60-0823, 60-0683, 60-1818, 60-0500
Triumph Throttle Cable T120 Bonneville To suit Triumph - T100T Daytona (1967) long, T120 Bonneville (1964-68) long, T120R Bonneville/T120V (1968-73) long,...
+

off-cab-BRI1100
£20.95 (£25.14 inc VAT)
Universal Clutch/Brake Cable Kit - Inner and Outer Cable + 1/4" BSF Cable Adjuster, Nipples and Ferrules Inner wire and outer conduit plus a range of...
+

fklev017-E14
£10.95 (£13.14 inc VAT)
OEM: 208PA
Clutch Lever 7/8" Ball End. Replica Doherty 208PA clutch lever to fit 7/8" handlebar. 1+1/16" pivot centres (pivot to cable nipple centres) Cable adjuster...
+

fktwist217r-E8
£13.95 (£16.74 inc VAT)
OEM: 60-7014, 66-8540, 16/364
Amal 364 Type Single Pull Twist Grip - 7/8" Bars Throttle assembly/twistgrip suitable for single pull cable. With throttle screw and friction adjuster....
+

fktwist219-E8
£13.95 (£16.74 inc VAT)
Standard Universal Twist Grip - Single Pull - 7/8" Bars Throttle assembly/twistgrip with metal tube suitable for 7/8" (22mm) handlebars. Metal tube...
+

cab-slotted-std-E12
£3.45 (£4.14 inc VAT)
OEM: 18/880
Barrel Type Slotted Nipple - Outside Diameter 3/8" - Standard Suitable for use with standard pre-made cables fitted with a 3/16" pear nipple. Typically...
+

fkcab11-E12
£0.40 (£0.48 inc VAT)
Cable End Ferrule No.1 Suitable for outer casing ends. Priced singly.
+

fkgrip047-E17
£5.95 (£7.14 inc VAT)
Rubber Handlebar Grips 1" - Pair Amal Replica Type Length = 5inch ID = 1+1/8" for throttle and 1" for other side The rubbers will measure 7/8" and 1"...
+

cable-CBK034-E8
£7.95 (£9.54 inc VAT)
Throttle Cable Universal 51" Supplied with 3 nipples for soldering on: 1/4" Drum type, 3/16" Barrel type and 1/4" Barrel type. Outer Length: 51" Inner...
+

clevis490-E12
£3.95 (£4.74 inc VAT)
Clevis Bend - Quick Release - 1/4" to suit 1/4" (6mm) Clevis Pin with 11/16" (15mm) shaft length Suitable for cable end with a pear nipple, to allow...
+

adj1708-E12
£4.95 (£5.94 inc VAT)
OEM: 18-1708, 18-1709, 18-838, 18-839, 99-1031, 60-3585, 60-3586
Cable Adjuster and Lockring Nut - Slide In Type - Triumph, BSA and AMC Groove cut through side to allow fitting after cable made up. Total length:...
+

fklev007-E14
£15.95 (£19.14 inc VAT)
OEM: 12/171, 12/569, 12/609, 66-8810
Magneto or Air/Choke Lever - Left Hand For 7/8" Handlebars - Ball End Type Left handed chrome plated magneto lever as used on many British bikes - BSA,...
+

cable758
£8.95 (£10.74 inc VAT)
OEM: 60-1994, 60-0565, D565
Triumph Clutch Cable Suitable for following: Triumph - T100C Trophy (1969-71), T100R Daytona (1969-73), TR5T/Trophy Trail Adventurer (1973). Also fits:...
+

fkcab13-E12
£0.40 (£0.48 inc VAT)
Cable End Ferrule No.3 Suitable for outer casing ends. Priced singly.
+

cable299
£9.95 (£11.94 inc VAT)
OEM: 65-8714, A2/256
Magneto Cable - AJS, Ariel, BSA, Matchless, Norton Spring behind the magneto end barrel nipple + 1/4" drum nipple at the lever end. To Fit: BSA -...
 

fkgrip030-E17
£8.45 (£10.14 inc VAT)
Rubber Handlebar Grips - Amal Cushion Type As used on Triumph T120 1966 and other models For handlebar diameter 7/8" Supplied as a pair, one at 7/8" and...
+

hbolt1580-E12
£0.75 (£0.90 inc VAT)
OEM: 97-1580, H1580
Triumph/BSA Handlebar P Clamp Rubber Buffer Washer - 500/650/750cc Models Rubber buffer washer for use with handlebar eyebolt 97-1523 or 97-2291. Two...
+

off-grip6280
£8.95 (£10.74 inc VAT)
OEM: 6280.82.40.06-0
Domino Slim Competition Trials Type Handlebar Grips - Ideal for Pre 1965 or Twinshock Trials Bikes Premium quality classic trials style rubber grips...
+

cable650
£8.95 (£10.74 inc VAT)
OEM: 67-8681
BSA Clutch Cable Suitable for following: BSA - A7 Standard, A10 (1948-58) A7 Twins (1958-59), A10 Standard (1955-58) B31,B32,B33,B44 (1949-58) Outer...
+

fkcable105
£6.95 (£8.34 inc VAT)
Air Cable Universal - Amal Concentric 622/624/626 For Amal Concentric 622/624/626 carburettors. Outer Length: 34" Inner Length: 39" 1/4" Drum type nipple...
+

fklev009-E14
£15.95 (£19.14 inc VAT)
OEM: 18/454, 18/864, 42-8611, 66-8513, 105
Decompression / Exhaust Lifter Control Lever For 7/8" Handlebars - Flat End Exhaust valve lifter / decompression lever as used on many  British bikes -...
+

mirr651-G13
£13.95 (£16.74 inc VAT)
Chrome Bar End Motorcycle Mirror Fits 7/8" handlebars, arm folds in to allow getting the bike into tight spaces. Essential equipment for looking at who...
+

t/cabt-8-204
£14.95 (£17.94 inc VAT)
OEM: 60-0578, D578, CLN/F
28" Magnetic Tachometer Cable - Triumph T100, T120, TR6 and T150 - 1966 Onwards - Venhill Armoured Suitable for various makes and models fitted with a...
 

lev025-E15
£37.95 (£45.54 inc VAT)
Pair of 7/8" Ball Ended Levers With Cable Adjusters. (1-1/16" pivot centres) Premium quality chrome plate & fixing screws. For 7/8" (22mm) handlebars.
+

fklev018-E14
£10.95 (£13.14 inc VAT)
OEM: 208PA
Brake Lever 7/8" Ball End. Replica Doherty 208PA brake lever to fit 7/8" handlebar. 1+1/16" pivot centres (pivot to cable nipple centres) Cable adjuster...
+

amal-adj001
£1.95 (£2.34 inc VAT)
OEM: 4/035, 9/035, 99-1024, 99-7096
Amal Carburettor Cable Adjuster For 600, 900, 276, 376, 389 series Amal carburettors Screws into the top cap to adjust the cable. OEM: 4/035, 9/035,...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.