.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Tap Parts

fkwash073-F3
£0.95 (£1.14 inc VAT)
OEM: 70-7351, E7351, 70-6961, E6961
Dowty Washers for Fuel Tap 1/4" Rubber inner section Hole id 1/2" Used for fuel petrol tap seal, also tacho drive seal, and other uses across the range of...
+

crush-wash351-F3
£1.45 (£1.74 inc VAT)
OEM: 70-7351, E7351
Crush Copper/Rubber Washers for Fuel Tap 1/4" Sealing washer for 1/4" petrol tap - Price for ONE washer. Rubber seal encased in copper, when fitted to fuel...
+

fktappart106-F3
£0.95 (£1.14 inc VAT)
Fuel Tap Cork For Pull On Type Fuel Taps - 3/8" Normally you will require one cork per tap. Price is for ONE cork Note: These corks are bigger than you...
+

fkwash116-F3
£2.95 (£3.54 inc VAT)
Fibre Washers - 10 x 1/4" Gas Suit 1/4" Gas thread for fuel taps. Hole id 1/2" Supplied as 10 washers
+

fktappart022-F3
£1.75 (£2.10 inc VAT)
OEM: 82-8132S, 82-3182, 82-3337, F3182, F3337
Fuel pipe tap nut 1/4" gas thread Diameter across threads inside of nut = 7/16" Hole diameter = 3/8" 1/4 BSP thread, which is approx 1/2" thread diameter...
+

fktappart051-F3
£9.95 (£11.94 inc VAT)
Fuel Tap Pipe 90 Degree Elbow with Gas Nut - 1/4" (6.35mm) Fuel tap nut and spigot for 90 degree connection Will fit any tap with 1/4" Gas Thread fitting...
+

fktappart027-F3
£1.95 (£2.34 inc VAT)
Fuel Tap Pipe Spigot for 1/4" Gas Thread Nut Suitable for 1/4" thread. Requires a nut to attach to the fuel tap - see related products
+

tappart3335/3337-F3
£4.95 (£5.94 inc VAT)
OEM: 82-3335, F3335, 82-3337, F3337, 82-3182, F3182
Fuel Pipe Spigot - 90° Elbow Type With 1/4" BSP Gas Nut 90 degree fuel pipe elbow with chrome plated gas nut suitable for use with 1/4" BSP fuel taps - as...
+

fktappart057-F3
£5.95 (£7.14 inc VAT)
Fuel Pipe T Piece for 1/4" Pipe Bore Suit 1/4" or 6mm. Standard T piece is chromed. We have a few Brass T piece available, please select if required.

fkwash117-F3
£2.95 (£3.54 inc VAT)
Fibre Washers - 10 x 3/8" Gas Suit 3/8" Gas thread for fuel taps. Hole id 5/8" Supplied as 10 washers
+

tappart119-F3
£4.45 (£5.34 inc VAT)
Fuel Tap Adaptor 1/4 "- 3/8" Converts your tap thread from 1/4"(1/2"o.d.) to 3/8" (5/8"o.d).
+

fkwash115-F3
£2.95 (£3.54 inc VAT)
Fibre Washers - 10 x 1/8" Gas Suit 1/8" Gas thread for fuel taps. Hole id 3/8" Supplied as 10 washers
+

tappart014-F3
£2.95 (£3.54 inc VAT)
Fuel Tap Filter Replacement - Petrol Tap Filter Plastic fine mesh filter, screws onto the fuel tap Filter diameter approx 10mm Thread diameter approx...
+

wash071-F3
£0.75 (£0.90 inc VAT)
5/8" ID Bonded Seals Dowty Washer Suitable for 3/8" BSP Fuel Taps Fuel tap sealing washer with bonded rubber inner section. Suitable for use with 3/8"...
+

tappart023-F3
£2.95 (£3.54 inc VAT)
Fuel Tap Gas Nut and Spigot - 7/16" Thread Fuel line to tap spigot and nut with 7/16" BSP thread. Suitable for fuel pipe with a 1/4" internal diameter -...
+

tappart3334/3337-F3
£4.95 (£5.94 inc VAT)
OEM: 82-3334, F3334, 82-3337, F3337, 82-3182, F3182
Fuel Pipe Spigot - Straight Type With 1/4" BSP Gas Nut Straight fuel pipe with chrome plated gas nut suitable for use with 1/4" BSP fuel taps - as used on...
+

wash0002-F3
£0.45 (£0.54 inc VAT)
OEM: 83-0002, F10002
Fuel Tap Steel Sealing Washer - 1/4" BSP Petrol Taps Thin flat steel fuel tap washer which locates between the Dowty washer and tap locknut to ensure a...
+

tap-spig516-F3
£4.45 (£5.34 inc VAT)
Fuel Pipe / Oil Tank Feed - Large Bore Spigot and 1/4" BSP Thread Gas Nut Suitable for use with fuel taps or BSA type oil filters with a 1/4" thread....
+

fktappart105-F3
£0.95 (£1.14 inc VAT)
Motorcycle Fuel Tap Cork Diameter: 9/16" Length: 1/4" For slide type Motorcycle fuel taps Price is for ONE cork Normally you would require 2 corks per tap.
+

tap-spig037-F3
£4.95 (£5.94 inc VAT)
OEM: 82-3353, F3353, 82-3337, F3337, 82-3182, F3182
Fuel Pipe / Oil Tank Feed - Large Bore Spigot - 25° Obtuse Elbow Type With 1/4" BSP Gas Nut Suitable for use with fuel taps or BSA type oil filters with a...
+

tappart49-91-F3
£1.25 (£1.50 inc VAT)
OEM: A49-91
Fuel Tap Plunger Retaining Screw Overall Length: 5/16" (8mm) UH: 1/4" (6.6mm) - part threaded OEM: A49-91 Please note: Current stock is brass with a...
+

tappart104P-F3
£4.95 (£5.94 inc VAT)
OEM: R27A/CP
Replacement Fuel Tap Plunger - Turn to Lock - Push Off Fuel tap plunger for use on plunger type petrol taps. Simple turn to lock and push off...
 

pipe3335
£3.95 (£4.74 inc VAT)
Petrol Fuel Pipe 90 degrees - 82-3335 5/16" diameter pipe 90 degree bend Nickel plated steel pipe, or nickel plated Brass, depending on stock available.
+

tappart3353/3337-F3
£4.95 (£5.94 inc VAT)
OEM: 82-3353, F3353, 82-3337, F3337, 82-3182, F3182
Fuel Pipe Spigot - 25° Obtuse Elbow Type With 1/4" BSP Gas Nut 25 degree obtuse fuel pipe elbow with chrome plated gas nut suitable for use with 1/4" BSP...
+

tappart586
£2.95 (£3.54 inc VAT)
1/4" Brass Fuel Stop Plug - Fuel Plug 1/4 BSP Brass 1/4 BSP Threaded plug, suitable to screw in to fuel tank in place of fuel tap. 1/4 BSP Thread Diameter:...
+

tappart200C-F3
£7.95 (£9.54 inc VAT)
Fuel Tap Gas Nut and Spigot - 1/4" BSP Thread - Chrome Plated For use with most 1/4" BSP threaded fuel taps as used on many Triumph, BSA, Norton and...
+

fktappart108-C-F3
£2.45 (£2.94 inc VAT)
Fuel Tap Banjo - BSA Fuel Tap Single banjo with 7/16" hole and 1/4" spigot. Available as Cast or Machined - please select option. OEM: 42-8071
 

pipe3353-F3
£3.45 (£4.14 inc VAT)
Petrol Fuel Pipe 25 degrees - 82-3353 5/16" diameter pipe 25 degree bend Nickel plated steel pipe pipe spigot
+

tappart102P-F3
£4.95 (£5.94 inc VAT)
OEM: R26A/CP
Replacement Fuel Tap Plunger - Pull On/Push Off Type Fuel tap plunger for use on plunger type petrol taps. Simple pull on and push off mechanism. Overall...
 

tappart8060-F3
£3.45 (£4.14 inc VAT)
OEM: 67-8060
BSA Fuel Tap Bottom Banjo Domed Nut - Models With 3/8" Single Plunger Petcock Domed acorn nut as used in conjunction with a  42-8075 or 65-8171 push/pull...
+

tap-part017-F3
£9.95 (£11.94 inc VAT)
Fuel Tap Pipe T Piece with Gas Nut - 1/4" (6.35mm) Fuel tap nut and T Piece spigots for dual connection Will fit any tap with 1/4" Gas Thread fitting...
+

tappart118-F3
£3.95 (£4.74 inc VAT)
Fuel Tap Adaptor 1/8" - 1/4" Converts your tap thread from 1/8" (3/8"o.d.) to 1/4" (1/2"o.d).
+

fktappart101-F3
£2.95 (£3.54 inc VAT)
OEM: 42-8075A
Twin Banjo for Fuel Tap - BSA OEM: 42-8075A Fits BSA A7/A10 Fuel Tap: 42-8075, 65-8171
+

tapart3334-F3
£3.45 (£4.14 inc VAT)
OEM: 82-3334, F3334
Petrol Fuel Pipe Connector Straight - 82-3334 5/16" diameter pipe No bend Nickel plated Brass OEM: 82-3334, F3334
+

tappart18/38-F3
£4.45 (£5.34 inc VAT)
Fuel Tap Adaptor - 1/8" To  3/8" BSP Converts your tap thread from 1/8" (3/8" OD) to 3/8" (5/8" OD).
+

fuel-spigot-716-F3
£3.45 (£4.14 inc VAT)
Fuel Tap Pipe Spigot for 7/16" Thread - Brass Fuel pipe spigot for 7/16" gas thread nut, or 7/16" BSP Suit 1/4" fuel pipe.
+

pipe-coupler-126-F3
£8.95 (£10.74 inc VAT)
Fuel Pipe Coupler Joint - for 1/4" Pipe Bore Simple and easy to disconnect your fuel pipe, makes it real easy to take the petrol tank off a bike. Press the...
+

tappart201B-F3
£7.95 (£9.54 inc VAT)
Fuel Tap Gas Nut and Spigot - 1/4" BSP Thread - Brass For use with most 1/4" BSP threaded fuel taps as used on many Triumph, BSA, Norton and other...
+

inlinetap09-F3
£12.45 (£14.94 inc VAT)
Fuel Tap In-Line, On/Off Fits in line with fuel pipe, simple on/off lever Suit 6mm or 1/4" pipe.
+

tappart580
£2.95 (£3.54 inc VAT)
1/4" Brass Nipple - Fuel Line 1/4 BSP Taper Joining Nipple Brass 1/4 BSP - Taper Thread. Threaded nipple with hexagon centre. 1/4 BSP Thread Diameter: 1/2"...
+

tappart727
£4.95 (£5.94 inc VAT)
1/4" Fuel Elbow - Fuel Line Elbow Nickel plated Brass. Threaded Elbow Piece. 1/4 BSP Inlet Thread Diameter: 1/2" (12.7mm) Please note: 1/4" BSP refers...
+

tappart406
£2.95 (£3.54 inc VAT)
1/4" Stainless Nipple - Fuel Line 1/4 BSP Equal Joining Nipple Brass 1/4 BSP - Parallel Thread. Threaded nipple with hexagon centre. 1/4 BSP Thread...
+

tappart594
£4.95 (£5.94 inc VAT)
3/8"-1/4" Brass Reducing Nipple - Fuel Line 3/8 BSP - 1/4 BSP Hexagon reduction Used to convert 3/8bsp thread to a 1/4bsp thread. Threaded nipple with...
+

tappart605-F3
£2.45 (£2.94 inc VAT)
1/4" Brass Fuel Stop Cap - Fuel Cap 1/4 BSP Brass 1/4 BSP Threaded cap, suitable to screw on end of fuel tap, or fuel tank outlet. 1/4 BSP Thread Diameter:...
+

wash350-F3
£0.75 (£0.90 inc VAT)
Bonded Seals Dowty Washer Suitable for 1/8" BSP Fuel Taps - ID 3/8" Fuel tap sealing washer with bonded rubber inner section. Suitable for use with 1/8"...
+

tappart227
£4.95 (£5.94 inc VAT)
1/4" Tee Piece - Fuel Line T Piece - 3 way joint Nickel plated Brass. Threaded Tee Piece. 1/4 BSP Inlet Thread Diameter: 1/2" (12.7mm) Please note: 1/4"...
+

pipe-coupler-128-F3
£8.95 (£10.74 inc VAT)
Fuel Pipe Coupler Joint - for 5/16" (8mm) Pipe Bore Simple and easy to disconnect your fuel pipe, makes it real easy to take the petrol tank off a bike....
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.