BSA Bantam Electronic Ignition / Lighting Replacement Stator Kit - D1-D7 Models

BSA Bantam Electronic Ignition / Lighting Replacement Stator Kit - D1-D7 Models

Suitable for the following bikes: BSA Bantam D1, D3, D5 and D7.
Available in two options - please select
With Battery: Kit with regulator/rectifier for DC power to use with a battery. (6v or 12v)
Without Battery: Kit with regulator for AC power to use without battery. (6v or 12v)

Replacement, complete CDI (capacitive discharge ignition) electronic ignition suitable for Bantam models originally fitted with Wipac ignition.

The CDI (capacitive discharge ignition) works by charging a capacitor within the CDI unit from the source coil on the stator, this same coil also produces the timing signal. The cdi digitises the signal and uses the microprocessor to derive the pre-programmed ignition timing curve.

• Kit includes 55w lighting coil and AC regulator, or DC regulator/rectifier.
• New stator assembly allows for full adjustment of the ignition timing even if the engine has been fitted with an incorrect crankshaft i.e. D1 fitted with D7 crank.
• High energy self generating CDI ignition with electronic advance/retard curve for very easy starting and smooth tractable performance.
• Direct fitting stator, no exchange required, easy timing set-up adjustment is via the original slotted holes in the Wipac cover.
• External rotor, weight 2.55kg (original wipac is 2.15kg). Rotor is machined from a single billet with a keyway and extractor thread to match the original rotor. Marks are engraved to allow timing to be set-up at the ‘Full advance’ position.
• The magnet is a one piece composite high energy type. High quality electroplating is used to prevent corrosion.